Can you update a table with a column field that has a default value

I am looking at a developer table(table_one) and basically, he has a column field called is_update and the default for that field is 1,
I was just wondering whether it would still be possible for me to use an update syntax of the form
update table_one t
set t.is_update = 0;
where t.id = 221;because I have tried doing so and the update isnt working

Semicolon (;) is the problem!
update table_one t
set t.is_update = 0 --Removed semicolon here!.
where t.id = 221;http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_10008.htm#SQLRF01708
query & URL added: Saubhik on Oct 21, 2010 7:02 AM

Similar Messages

HT4972 Can you update your iPhone with firmware V 4.2.1 to v5. If so, How. I just tried and it did nothing bu mess things up.

Can you update your iPhone with firmware V 4.2.1 to v5. If so, How. I just tried and it did nothing bu mess things up.

Greg434 wrote:
I'm screwed. Time for a new phone. Model # A1242 plain old 3G. Thank you for your assistance Michael.
Well, you're timing is perfect then Are you eligible for any upgrade pricing from your service provider?
I skipped over the iPhone 4s, and I am eligible for full upgrade pricing in almost exactly one month from yesterday, so I will be moving to an iPhone 5 next month.

How can I update the table with a single query for...

I have a table with columns C1 and C2.
C1 C2
A1 null
A1 null
A1 null
A1 null
A2 null
A2 null
A2 null
A3 null
A4 null
A4 null
I want to update my table with a single query so that I would have data like
C1 C2
A1 1
A1 2
A1 3
A1 4
A2 1
A2 2
A2 3
A3 1
A4 1
A4 2
The updated column C2 has the values like serial no grouped on the column C1.

SQL> create table mytable
2 ( c1 varchar2(2)
3 , c2 number(2)
4 )
5 /
Tabel is aangemaakt.
SQL> insert into mytable (c1)
2 select 'A1' from dual union all
3 select 'A1' from dual union all
4 select 'A1' from dual union all
5 select 'A1' from dual union all
6 select 'A2' from dual union all
7 select 'A2' from dual union all
8 select 'A2' from dual union all
9 select 'A3' from dual union all
10 select 'A4' from dual union all
11 select 'A4' from dual
12 /
10 rijen zijn aangemaakt.
SQL> select * from mytable
2 /
C1                                     C2
A1
A1
A1
A1
A2
A2
A2
A3
A4
A4
10 rijen zijn geselecteerd.
SQL> merge into mytable t1
2 using (select c1
3              , row_number() over (partition by c1 order by null) rn
4              , rowid rid
5           from mytable
6        ) t2
7     on (t1.rowid = t2.rid)
8   when matched then
9        update set c2 = rn
10   when not matched then
11        insert values (null,null)
12 /
10 rijen zijn samengevoegd.
SQL> select * from mytable
2 /
C1                                     C2
A1                                      1
A1                                      2
A1                                      3
A1                                      4
A2                                      1
A2                                      2
A2                                      3
A3                                      1
A4                                      1
A4                                      2
10 rijen zijn geselecteerd.Regards,
Rob.

Issue with Popup LOV field not clearing out "default" value

I am using APEX 4.0 & Oracle 10g
I have a form that displays a default value on a "Popup LOV" field (say P1_POPUP) when the Form is initially displayed to the user. The default value is part of the Popup LOV list of values. If the field is "manually cleared" *i.e. I clear the default value by backspacing and don't touch the LOV) and I Refresh (submit) the form (REFRESH button to display the same Form again), the default value is still displayed.
In Post Processing, I debugged the value of P1_POPUP to see if holds the default value and yes it does. I was expecting no value in P1_POPUP.
Is this an APEX standard behavior?
Any way how I can get rid of this value on an manually clearing action of this Pop Up field?
Looking forward for your response.
Thank very much in advance.
Ed.

I apologize, the default value was NULL indeed. However, it seems like I may need to manually clear this value so that it will not be displayed.

How do you redesign a site with a new template that has apps, etc.?

In BC Cafe I was advised to do the redesign in the same site and keep as much as possible of the existing site so as to not affect SEO. I have chosen a BC Gurus Template that fits our needs and the client's budget that has a number of apps. I don't knw how to meet the suggestion that I build the redesigned site with the new template within the same site. I know we will have to upgrade to eCommerce to be able to do so but logistically I am not sure how to do that.
It seems to be that I'm missing something very obvious and that I shouldn't be stumped by this. What am I missing?
John

Let me clarify. I know how to upgrade to eCommerce, I don't know how to merge the trial site with the existing site. I also don't know all of the factors I will need to consider when I have trial pages up for viewing as well as the existing site. This seems like a problem to me.

Can you update a web app's weighting field automatically??

I'm having a real hard time understanding why we have the power in BC to build web apps but can't sort data the way we want through automation... I realize at this point, the only way to sort my items by date is to manipulate the weighting field. However, I’m building a user driven site with all user submitted content and it needs to be available immediately. Now, obviously results are posted online as soon as they are submitted but as of now, the only automatic way to display results that makes any sense is by a Recent Activity listing or Alphabetical.
Is there any way to automate updating an item's weighting field so that results can be available in order of, for example, Event Date (custom date field)?????
HELP PLEASE - all this power sure seems like a waste if you can't manipulate your results accordingly!!

Ok- two things--
1. You are missing a "(" at the beginning of your function-- you currently have:
function($){
    var container = $(".sort-list");
    var items = $(".sort-item");
    items.sort(function(a,b){
        return new Date($(a).attr("data-event-date")) < new Date($(b).attr("data-event-date"));
    }).each(function(){
        container.prepend(this);
})(jQuery);
But you need a beginning parenthesis before the "function":
(function($){
    var container = $(".sort-list");
    var items = $(".sort-item");
    items.sort(function(a,b){
        return new Date($(a).attr("data-event-date")) < new Date($(b).attr("data-event-date"));
    }).each(function(){
        container.prepend(this);
})(jQuery);
2. Move the whole script in your page to after the "ul.sort-list" element. Right now you have the javascript in the page before the UL element that holds your web app items, so the browser will read that javascript first and since it hasn't read the web app item list inside the UL element then it won't work, so move it to after the closing </ul> of your web app list.
You should be all set if you fix those two issues. Good luck!

How can I update the apps. with the new iTune, that's really silly especially I have two iTune account for different countries

I used 2 iPhones and a iPad, 2 Apple ID for different countries so that I can download apps. from different country. Its a pain and sometimes no possible to update the apps. on the ISO devices. Apple really needs to fix this aspect. Also the new iTunes is so difficult to use, please bring back the old one.

When Itunes opens
1) Click on drop dow list button top left under the player controls
2) Select Apps
3) At the bottom right there are two buttons, Check for updates and Get More Apps
An Alternative is when iTunes opens in the top menu Click on View, Show Sidebar. Then you will see your apps page as in itunes 10. Click on that option and as before you should have two buttons, Check for updates and Get More Apps.
NB this is all within Itunes NOT the iTunes Store

How can I update a quicktime movie placed in Keynote, that has been modified outside of Keynote??

HI! I really like Keynote for quicktime playback during a tv/film shoot, and use it frequently on set.
Media assets change frequently though, and it would be nice if the movies I place would update along with the external source.
How can this happen in Keynote? Seems like even if you save the file without copying audio/video into document, it still somehow references the initial placed movie.
Thanks for your help solving this problem, would be great if this app worked like every other app that imports external media.

That's a shame. It takes some tweaking, but PowerPoint can do this. I know it's not something that is needed all the time, but it's something I've needed on a few occasions. I wonder how well the timing would work out if I broke the video up into sub clips and simply assigned a clip to each slide? It's a lot more work and I suspect I'll pick up some clips and pops during the slide changes.
Keynote is still far better at what it does than PowerPoint, but do I ever wish it could do this so I could really show it off to people.
Thanks for the reply!

Can you recover saved data on a Time Capsule that has died?

I came home today to find that the green light to my Time Capsule was off. Did all the usual fixers...and after going to the several posts on a DEAD TC...I guess I have latest one. In addition to backing up my PC...I had a bunch of saved documents also.....can these be recovered or should I just can the TC?
Thanks for any responses!

With power supplies on ebay for $25 it is just as cheap and easy to unplug the power supply as it is to remove the hard disk and buy a cradle for it.
Power supply. Replacement left sitting next to the old one right. The covers have been removed and replaced.. Just make sure you get the 34W supply for the 2TB drive. The early supply was 30W and could not handle it.
Pull out the supply.. 3 plugs.. Mains in, Sata power and board.. and plug the new one in.
Only because these are fairly plentiful and much cheaper now.. it might not even last long.. but at least to recover your data and erase and sell as a working unit that is fair enough.
(not sure how long the post will last with pics of open TC??)

Can you install Leopard 10.5 on a computer that has XP OS.

I have a laptop and a desktop that both have XP OS. I want to know if I can load Leopard 10.5.

Welcome to Apple Discussions!
No, but you can install XP on a Mac with Mac OS X Leopard.
http://www.apple.com/bootcamp/
First off, Apple's license agreement forbids installing Mac OS X on anything but an Apple Macintosh labelled computer. Secondly, those machines use a different firmware than Apple uses most of the time, as well as lack certain optimizations the operating system has for hardware.
You can get a Mac with XP compatibility new for as little as $600 in the Mac Mini:
http://www.apple.com/macmini/
And any Apple Macintosh made since October 26, 2007 can have both a preinstalled Leopard and a self installed XP on them.
eMachine, despite its name has no relationship to the eMac made by Apple, though those eMacs could only emulate windows. New Intel Macs made since 2006 can virtualize Windows which is much faster than emulation. To read about the differences, see my FAQ*:
http://www.macmaps.com/macosxnative.html#WINTEL
- * Links to my pages may give me compensation.
Message was edited by: a brody
Message was edited by: a brody

Can I replace my table with divs, in this context?

Hi,
I'm trying to accomplish something without the use of tables. Maybe someone can tell me how.
- The skeleton is basically made up of 3 newspaper-style columns.
- Their widths aren't very likely to change -- their widths will be fixed -- so this eliminates one problem right off the bat, right?
- The first column (left) is a sidebar menu, and it has its own distinct background image pattern.
- The other two columns (mid and right) share a flat background. Right now, I'm just calling the same 1k JPG twice (once in each of those two columns/cells). I find this simpler than creating an unnecessary container just for the common background.
- All 3 columns begin at the same line (0).
So far so good, the fixed widths and the fact that they all begin at y=0 makes this easier than it otherwise could have been.
Now here's the tricky part :
- The amount of content is different from page to page (some pages are longer than others), and the amount of content per column will also vary individually (so the sidebar might be the longest column in one file, the mid column could be the longest element in the next, and so on...)
- The layout is horizontally centered.
- All 3 columns need to end at the same spot, which will be dynamic from page to page (in other words, the backgrounds of these columns need to stretch/repeat until the end of the column with the most content, whichever of the 3 columns that may be on any given page).
- There is a page-end image to display that is as wide as the combined 3 column widths.
As you can imagine, using a table with 3 columns makes this easy as pie. But I was told to avoid tables whenever possible, so if there's an easy way to justapose 3 divs and have them behave like 3 cells of the same table -- without too much markup -- I'd give it a try, and potentially leave tables behind for good.
It would be easy enough to create a large container div, horizontally center it, and left-float 3 divs inside it... but this doesn't address the problem of having to have those backgrounds repeat all the way to the end of the site. The way I just described, the backgrounds would vertically end wherever the content of that individual column ends.
And since we know divs don't like height=100%, well...
Any help would be appreciated.
Thanks!

Have you tried using Faux Columns?
http://www.alistapart.com/articles/fauxcolumns/
or Project Seven's Equal Height Columns script?
http://www.projectseven.com/tutorials/css/pvii_columns

Cluster table with Spatial column

Hi,
I tried to create a spatial table(with one SDO_GEOMETRY column) with cluster on one attribute column. But I keep getting error ORA-03001: unimplemented feature.
Is this mean that I can not cluster a table with SDO_GEOMETRY column?
Thanks
Helen

Hi Helen,
The parameter you mention is only for real application clusters, not for clustering columns of tables.
As far as I can tell, when clustering columns of different tables together Oracle will try to
store all of the data associated with those tables together on disk.
The Oracle Spatial geometry datatype (mdsys.sdo_geometry) includes two varray types of
length 1048576. Because these varrays can hold so much data Oracle "makes arraingements"
to store data in these columns outside of the table in a lob segment (in reality, data is only
stored out-of-line if there is over 4kb of data in the varray).
Because of this (no ability to ensure the spatial data is stored with the clustering columns),
the clustering mechnism is disabled when you have spatial data.
I read through the doc and it is unclear - the only restriction I could find is using these columns
as the clustering key.
Hope this helps,
Dan

Can you please help me with validation logic for Events in Table maintenance generator

Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

HT4972 If you have a 2nd generation can you update that with the ios information?

Can you update a 2nd Generation ipod touch with the ios information

See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                       iOS 3.1.3
iPhone 3G                                    iOS 4.2.1
iPhone 3GS                                 iOS 6.1
iPhone 4                                       iOS 6.1
iPhone 4S                                    iOS 6.1
iPhone 5                                       iOS 6.1
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1
iPod Touch 5                               iOS 6.1
iPad 1                                           iOS 5.1.1
iPad 2                                           iOS 6.1
iPad 3                                           iOS 6.1
iPad 4                                           iOS 6.1
iPad Mini                                      iOS 6.1
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

TS4036 My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

My iPhone has just been replaced and I am trying to restore from iCloud but its saying no backups are compatible with the version of IOS 6.0.1. My back iOS are IOS 6.1. Can you update the phone first then restore?

Welcome to the Apple Community.
Yes, update first, Settings > General > Software Update.
Then navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Can you update a table with a column field that has a default value

Similar Messages

Maybe you are looking for