Cannot add multiple filters on a single column on certain libraries

On some of our lists/libraries, we can filter a single column to display a more than one selection. For example, column1 contains the following choices:
Yes
No
Maybe
I can add a filter to column1 and select Yes and Maybe. This works in some lists/libraries, but does not for others. When I try to select more than one value, the view resets and shows everything. The column we are trying to filter on is a choice column
and is not calculated. Any help would be greatly appreciated.

Hi,
Where and how do you add your filter?
If you add the filter in your view, you can add the filter as below:
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • Cannot add multiple members of a failover cluster to a DFSR replication group

    Server 2012 RTM. I have two physical servers, in two separate data centers 35 miles apart, with a GbE link over metro fibre between them. Both have a large (10TB+) local RAID storage arrays, but given the physical separation there is no physical shared storage.
    The hosts need to be in a Windows failover cluster (WSFC), so that I can run high-availability VMs and SQL Availability Groups across these two hosts for HA and DR. VM and SQL app data storage is using a SOFS (scale out file server) network share on separate
    servers.
    I need to be able to use DFSR to replicate multi-TB user data file folders between the two local storage arrays on these two hosts for HA and DR. But when I try to add the second server to a DFSR replication group, I get the error:
    The specified member is part of a failover cluster that is already a member of the replication group. You cannot add multiple members for the same cluster to a replication group.
    I'm not clear why this has to be a restriction. I need to be able to replicate files somehow for HA & DR of the 10TB+ of file storage. I can't use a clustered file server for file storage, as I don't have any shared storage on these two servers. Likewise
    I can't run a HA single DFSR target for the same reason (no shared storage) - and in any case, this doesn't solve the problem of replicating files between the two hosts for HA & DR. DFSR is the solution for replicating files storage across servers with
    non-shared storage.
    Why would there be a restriction against using DFSR between multiple hosts in a cluster, so long as you are not trying to replicate folders in a shared storage target accessible to both hosts (which would obviously be a problem)? So long as you are not replicating
    folders in c:\ClusterStorage, there should be no conflict. 
    Is there a workaround or alternative solution?

    Yes, I read that series. But it doesn't address the issue. The article is about making a DFSR target highly available. That won't help me here.
    I need to be able to use DFSR to replicate files between two different servers, with those servers being in a WSFC for the purpose of providing other clustered services (Hyper-V, SQL availability groups, etc.). DFSR should not interfere with this, but it
    is being blocked between nodes in the same WSFC for a reason that is not clear to me.
    This is a valid use case and I can't see an alternative solution in the case where you only have two physical servers. Windows needs to be able to provide HA, DR, and replication of everything - VMs, SQL, and file folders. But it seems that this artificial
    barrier is causing us to need to choose either clustered services or DFSR between nodes. But I can't see any rationale to block DFSR between cluster nodes - especially those without shared storage.
    Perhaps this blanket block should be changed to a more selective block at the DFSR folder level, not the node level.

  • Want to add multiple idoc type with single message type.

    Hi Gurus,
    I have a problem. I want to add multiple idoc type with single message type in WE20.
    How we can do this in WE20 or is there any other way to do that?
    Please help me.
    Thanks in advance.
    Srimanta.

    hi,
    basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
    so what exactly we do in that is that we first use the message type for those idocs that we have created.
    now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
    so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
    it will solve your problem.
    hope this will help you!!!
    Thanks & regards,
    punit raval.

  • How To Concatenate Column Values from Multiple Rows into a Single Column?

    How do I create a SQL query that will concatenate column values from multiple rows into a single column?
    Last First Code
    Lesand Danny 1
    Lesand Danny 2
    Lesand Danny 3
    Benedi Eric 7
    Benedi Eric 14
    Result should look like:
    Last First Codes
    Lesand Danny 1,2,3
    Benedi Eric 7,14
    Thanks,
    David Johnson

    Starting with Oracle 9i
    select last, first, substr(max(sys_connect_by_path(code,',')),2) codes
    from
    (select last, first, code, row_number() over(partition by last, first order by code) rn
    from a)
    connect by last = prior last and first = prior first and prior rn = rn -1
    start with rn = 1
    group by last, first
    LAST       FIRST      CODES                                                                                                                                                                                                  
    Lesand         Danny          1,2,3
    Benedi         Eric           7,14Regards
    Dmytro

  • Can I get multiple sums in a single column based on a "code" I place.

    After importing a file of check/debit card activity from my bank, can I 'code' the line items based on tax categories ie Utilities, Medical expenses, Auto expenses, etc. and then get sums for each based on that code I placed in a single column? That would mean multiple sums in a single column based on the code used for each tax related expense. For instance, I would put UT in the column for utilities expenses and MED in the same column if it were a medical expense. I would then want the sum for all items in that column for each item code. Is this possible or do I need to use a different approach to get this information.

    My guess is that the SUMIF function may be your friend.
    It's well described in the *iWork Formulas and Functions User Guid*e which every user may download from the Help menu.
    Yvan KOENIG (VALLAURIS, France) samedi 2 janvier 2010 21:56:39

  • Can I add multiple elements on a single line?

    Can I add multiple elements on a single line?

    Not yet. But this is something we plan to support. You can vote on this idea here: http://forums.adobe.com/ideas/1046
    We use this to help prioritize our work.
    Randy

  • Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

    I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click.  At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color.  Is there a way to select the top and bottom border of a cell in one click?  Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

    Thank you for the suggestion but this did not work for my Mac.  When a cell is selected for which I want borders, the entire cell is lit up.  Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border.  So selecting the style, thickness, and color first doesn't work.
    If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time.  After selecting one border, style, thickness, and color, said border is now on the spreadsheet.  Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color.  Yes, it is tedious.
    The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
    Does it have something to do with Allow or Disallow border selection?
    I have Numbers '09 version 2.1 (436)

  • Does anyone know how to add multiple pictures to a single frame in iMovie?

    Does anyone know how to add multiple pictures to a single frame in iMovie?

    Maybe you would be better off posting this in the iPhoto or iDVD categories of the forums.
    http://discussions.apple.com/category.jspa?categoryID=143
    http://discussions.apple.com/category.jspa?categoryID=128
    The answer to your question depends on what you ant to do with the DVD.
    Do you want a DVD menu, slide show etc.
    iPhoto will allow you to burn straight to a DVD. Just select the album you want to burn then go to share in the tool bar and select Burn.

  • How can i add multiple validations for a single input box in adf?

    hi,
    i want to add multiple validation for a single input text control in adf like number validation and its existence in database.
    MY JDEV VERSION IS 11.1.1.5.0
    pls help !!!!

    Hi,
    1.I want to validate if the value entered is pure integer
    Option 1-
    select the component and in the Property Inspector, in the "Core" category select a "Converter" format, select javax.faces.Number, if the user put a string, adf show a dialog error or message error...
    Option 2-
    or use the Regular expression:-
    http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_validateRegExp.html
    https://blogs.oracle.com/shay/entry/regular_expression_validation
    Also check this:-
    http://docs.oracle.com/cd/E15523_01/web.1111/b31973/af_validate.htm#BABHAHEI
    Option 3-
    Frank in his great book 'Oracle Fusion Developer Guide' shows a example using a javascript for input which is allowed only for numbers. You can manipulate for your requirement.
    Here is the code:
    function filterForNumbers(evt) {
        //get ADF Faces event source, InputText.js
        var inputField = evt.getSource();
        var oldValue = inputField.getValue();
        var ignoredControlKeys = new Array(AdfKeyStroke.BACKSPACE_KEY, AdfKeyStroke.TAB_KEY, AdfKeyStroke.ARROWLEFT_KEY, AdfKeyStroke.ARROWRIGHT_KEY, AdfKeyStroke.ESC_KEY, AdfKeyStroke.ENTER_KEY, AdfKeyStroke.DELETE_KEY);
        //define the key range to exclude from field input
        var minNumberKeyCode = 48;
        var maxNumberKeyCode = 57;
        var minNumberPadKeyCode = 96;
        var maxNumberPadKeyCode = 105;
        //key pressed by the user
        var keyCodePressed = evt.getKeyCode();
        //if it is a control key, don't suppress it
        var ignoreKey = false;
        for (keyPos in ignoredControlKeys) {
            if (keyCodePressed == ignoredControlKeys[keyPos]) {
                ignoreKey = true;
                break;
        //return if key should be ignored
        if (ignoreKey == true) {
            return true;
        //filter keyboard input
        if (keyCodePressed < minNumberKeyCode || keyCodePressed > maxNumberPadKeyCode) {
            //set value back to previous value
            inputField.setValue(oldValue);
            //no need for the event to propagate to the server, so cancel
            //it
            evt.cancel();
            return true;
        if (keyCodePressed > maxNumberKeyCode && keyCodePressed < minNumberPadKeyCode) {
            //set value back to previous value
            inputField.setValue(oldValue);
            evt.cancel();
            return true;
    2.I want to check if the value exists in my respective DB You must be having EO or VO if you want to validate with database in that case use the solution suggested by Timo.
    Thanks
    --NavinK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Library Filters: Filter for multiple values in a single column and Wildcards

    If you have a multi-value column in a library, can you filter to show only results where two (or more) specific values (terms) are applied? E.g. Year 2014 and Month January? Seems this would be particularly useful for Enterprise Keywords columns.
    Similarly, is there any way to filter on one value OR another value in a single column (e.g. Document Type Memo OR Fax)?
    Any way to use wildcards in searches (would be REALLY useful in the Title and Name columns when naming conventions have been followed).
    I'm guessing the answer is going to be 'move to SharePoint 2013' - if that is the case, please confirm whether all the scenarios mentioned above are catered for.

    Thanks for your replies !
    Is there any other way to achieve this ?
    There is 1 InfoObject which has 2 fields Employee and Department.
    Employee     Department
    001                A
    001                B
    001                C
    In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
    Can this be done in the backend through a ABAP code?

  • Concatenate multiple row values into single column value

    Hello,
    Can anyone please refresh my memory on how to concatenate multiple row values into a single column value.
    In the following query, I will get multiple denial reasons per application and I would rather return all denial reasons on one line.
    SELECT a.application_id, a.membership_number,
    r.reason_text AS denial_reason,
    a.appl_receipt_date AS application_receipt_date,
    a.plan_request_1 AS application_plan_code,
    a.adjudication_date AS application_denial_date
    FROM application a, PLAN p, application_reason ar, reason r
    WHERE a.plan_request_1 = p.plan_cd
    AND a.application_id = ar.application_id
    AND ar.reason_id = r.reason_id
    AND a.adjudication_cd = 'D'
    AND a.appl_receipt_date BETWEEN '01-jan-2006' AND '31-dec-2006'
    AND p.plan_type_id = 12 and a.application_id = :appId
    ORDER BY application_id
    Any help is greatly appreciated.
    Thanks,
    -Christine

    found the following
    SELECT deptno,
           LTRIM(MAX(SYS_CONNECT_BY_PATH(ename,','))
           KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT deptno,
                   ename,
                   ROW_NUMBER() OVER (PARTITION BY deptno ORDER BY ename) AS curr,
                   ROW_NUMBER() OVER (PARTITION BY deptno ORDER BY ename) -1 AS prev
            FROM   emp)
    GROUP BY deptno
    CONNECT BY prev = PRIOR curr AND deptno = PRIOR deptno
    START WITH curr = 1;
        DEPTNO EMPLOYEES
            10 CLARK,KING,MILLER
            20 ADAMS,FORD,JONES,SCOTT,SMITH
            30 ALLEN,BLAKE,JAMES,MARTIN,TURNER,WARD
    3 rows selected.at http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php

  • How to add multiple databases for a single frontend

    We have a project based on distributed databases and we have to workout on .Net framework.I want to know some information of connecting multiple databases for a single frontend and how can we access them.
    If so we have connected 2 databases for a single frontend in future if I want add one more database to it how it will be possible to do it without disturbing the current connectivity.
    Please help me in resolving this problem.
    Thanks......

    hi,
    what do you mean by connecting 2 databases? can you explain further?
    using entityframework you can connect to different databases
    public class CustomerContext : DbContext
    public ReportContext()
    : base("DefaultConnection")
    public DbSet<Customers> Customers { get; set; }
    and your connectionstring (config file)
    <connectionStrings>
    <add name="DefaultConnection" connectionString="Data Source=(LocalDB)\v11.0;AttachDbFilename=D:\\Database\Project.mdf;Integrated Security=True" providerName="System.Data.SqlClient" />
    </connectionStrings>
    you can add more connection strings on it.
    https://msdn.microsoft.com/en-us/library/vstudio/cc716756(v=vs.100).aspx
    https://msdn.microsoft.com/en-us/library/ms254978(v=vs.110).aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Urgent ! How to add multiple JToolBars in a single JFrame

    How to implement multiple JToolBars in a single JFrame
    or what is the concept behind floating toolBars.If anybody can help me ,Thisis very urgent

    If you insist on multiple toolbars, use the following code:
    JToolBar tb1 = new JToolBar();
    //add stuff
    JToolBar tb2 = new JToolBar();
    //add stuff
    //put the toolbars on the top of the window
    JPanel toolbars = new JPanel(new BorderLayout());
    toolbars.add(tb1, BorderLayout.NORTH);
    toolbars.add(tb2, BorderLayout.CENTER);
    getContentPane().add(toolbars, BorderLayout.NORTH);Stephen

  • Cannot group multiple limit items in single local PO (ECS)

    We are on SRM 5.0 (SRM SERVER 5.5 SP 9) and are using SRM in the
    extended classic scenario.
    We use limit carts and want to be able to create a single PO with
    multiple limit items. However, it seems that the implementation of note
    1020305 as of SP 9 prevents the possibility to group limit items together in a
    single PO completely. I tried implementing the BADI 'BBP_GROUP_LOC_PO' but it had no affect.
    Can someone please provide some advice on how to group multiple limit items into a single PO?
    Thanks,
    Nick

    Hi Atul,
    Thanks for the note - it was useful, although I don't think I can get my issue resolved as it implies we cannot group multiple limits into one PO.
    Can you please explain what the sentence "Multiple packages are possible starting from SRM 5.0 with hierarchies."?
    What are hierarchies and how do they work? Will they allow us to have multiple limit items on one PO?
    Thanks again,
    Nick

  • Multiple Selection Property in Single Column Listbox

    Hello All,
    I have taken a Single-column list box and have enable the multiple selection property of the listbox.
    In fact, i want to find out the values of the multiple rows selected in the listbox. But, i couldn't found any of the property of this listbox that can indicate the index or value of the multiple lines that are selected.
    Can anybody help me to resolve this issue? What is the approach i can take to find out the multiple rows selected in the listbox?
    Regards,
    Nishant

    Nishant wrote:
    Hello All,
    I have taken a Single-column list box and have enable the multiple selection property of the listbox.
    In fact, i want to find out the values of the multiple rows selected in the listbox. But, i couldn't found any of the property of this listbox that can indicate the index or value of the multiple lines that are selected.
    Can anybody help me to resolve this issue? What is the approach i can take to find out the multiple rows selected in the listbox?
    Regards,
    Nishant
    Here is an example where the value is read from a property node.
    the Value becomes an array when you elect a selection mode that allows multiple selections. (and thats the reason you can't write Selection mode while the VI is running
    Jeff
    Attachments:
    Listbox.vi ‏7 KB

Maybe you are looking for