Lead Status Field Updation Using Workflows

Hi,
Could anyone suggest me how to update Lead Status field using workflows since that field not visible at the workflow level. we can update using Lead Qualification Script . Is there any other way other then qualification script. Any help would be appreciated.
Thanks & Regards,
Ambarish.

The Status field for Lead is a read-only field. The updates you see are done by the system. Workflow cannot update read-only fields.

Similar Messages

Badi for Z-Fields updating using BAPI_CONTRACT_CREATE

Hi Experts,
I need badi name required for updating Custom fields in contract while creating purchase contract.
I am using BAPI_CONTRACT_CREATE for creating contract.
Thanks & Regards,
Sushant singh

1. did you pass your z-fields to BAPI_CONTRACT_CREATE
using EXTENSIONIN strucutre?
2. put break-point into your BADI and check if program stops there....
reards,darek

Custom fields update using BAPI: BAPI_SALESORDER_CHANGE

Hi,
      I have append one field into VBAP Table, and i want to update that filed value by using BAPI_SALESORDER_CHANGE FM. I have done all the coding but still its not updating the table. I have checked with SAP fields like order quantity, its upadating the database but the custom fileds are not upadting.
steps i have done: Append field to :           VBAP,BAPE_VBAP,VBAPKOZ
                               Append Check field to : BAPE_VBAPX,VBAPKOZX
Here is the code : plz check and add ur comments
DATA : l_wa_bapiparex        TYPE bapiparex,
         l_wa_ord_header        TYPE bapisdh1x,
         l_itab_bapiparex      TYPE STANDARD TABLE OF bapiparex INITIAL SIZE 0,
         l_itab_return         TYPE STANDARD TABLE OF bapiret2   INITIAL SIZE 0,
         l_wa_item              TYPE bapisditm,
         l_itab_item           TYPE STANDARD TABLE OF bapisditm INITIAL SIZE 0,
         l_wa_itemx             TYPE bapisditmx,
         l_itab_itemx          TYPE STANDARD TABLE OF bapisditmx INITIAL SIZE 0,
         ORDER_HEADER_IN       LIKE BAPISDH1.
l_wa_ord_header-updateflag = 'U'.
ORDER_HEADER_IN-REF_DOC = '0000000244'.
*Populate Item detail
l_wa_item-itm_number = '000010'.
l_wa_item-NET_WEIGHT = '5000'.
APPEND l_wa_item TO l_itab_item.
*Populate Item detail checkbox
l_wa_itemx-itm_number = '000010'.
l_wa_itemX-NET_WEIGHT = 'X'.
l_wa_itemx-updateflag = 'U'.
APPEND l_wa_itemx TO l_itab_itemx.
l_wa_bapiparex-structure = 'BAPE_VBAP'.
l_wa_bapiparex-valuepart1+0(10) = '0000000244'.
l_wa_bapiparex-valuepart1+10(6) = '000010'.
l_wa_bapiparex-valuepart1+16(15) = 'ABCDEF'.
APPEND l_wa_bapiparex TO l_itab_bapiparex.
CLEAR l_wa_bapiparex.
l_wa_bapiparex-structure = 'BAPE_VBAPX'.
l_wa_bapiparex-valuepart1+0(10) = '0000000244'.
l_wa_bapiparex-valuepart1+10(6) = '000010'.
l_wa_bapiparex-valuepart1+17(1) = 'X'.
APPEND l_wa_bapiparex TO l_itab_bapiparex.
clear l_wa_bapiparex.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      salesdocument    = '0000000244'
      order_header_in = ORDER_HEADER_IN
      order_header_inx = l_wa_ord_header
    TABLES
      return           = return
      order_item_in    = l_itab_item
      order_item_inx   = l_itab_itemx
     schedule_lines   = l_itab_schedule
     schedule_linesx = l_itab_schedulex
      extensionin      = l_itab_bapiparex.
IF SY-SUBRC = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          = 'X'
IMPORTING
RETURN        =
ELSE.
   RAISE ERROR.
ENDIF.
I HAVE GONE THROUGH DEBUGGING AND FOUND ALL ARE GOING FINE...ITS UPDATING VBKOM AND VBKOMX STRUCTURE BUT AT LAST ITS NOT UPDATING THE CUSTOM FIELDS
Thanks,
Baidya

Sorry guys........this code is correct one.......there is a problem in IDES....i tried in client server its working fine
If anyone is having this type of requirement then copy this program.
thanks,
Baidya

EMOD Delivery Status Field Update

I ma testing out the EMOD functionality and have been successful in ALL of the changes that occur in the Response Status based upon the hyperlinks in the email. Delivery Status changes to Hard Bounce or Soft Bounce when bad address, etc. However, the system is not updating the Delivery Status to Opened when I have actually opened the email. I know this is the other automatic update of the Delivery Status...Anyone experience this or am I not doing something right.

You have to create the email with the functionality to track message open this is found on "Step two - Design Message body" at the bottom of the top drop down menu next to responses there is another drop down menu with track message open select this option and then press insert.
This will resolve you issues.

Screen field Updation using user Exit

Dear all
In VA11, in the Services Tab, there is a table control . Through Configuration , Functional consultant added one filed. The added field has to be filled by the customer Exit SRVESLL . In the debugging mode , claculation is working properly. But in the screen , the calculated value is not appearing .
Can anyone suggest me any solution???
Thanks and Regards
Karthikeyan.P

Ya, I have extended .
SRV_ESLL-ZIELWERT = SRV_ESLL-NETWR / SRV_ESLL-MENGE.
but still its not appearing in the screen.
thnkz
Edited by: karthikeyan palaniayya on Apr 15, 2010 8:00 AM

Automating the Lead Status "Rejected" to "Archived"

Hi all,
My Customer, wants the Rejected leads to be archived automatically. Manually we can do it from Lead Detail page, where as daily n number leads will be rejected so manually it might be a problem. Can we "update values"(Lead Status field) by writing workflows.Can this be done.
Regards,
Ratan

Hi Dipesh,
What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
1. This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
In the action definition Processing type use method call.
Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
But in think implementing point 1 should be easier.
Wish the information is useful.
Regards,
Shalini Chauhan

Add value to Lead Status

Hi All,
How can I add new value's to Lead Status. Status field on the Lead Screen is a read only Pick list.
Thanks

Debendra, at this time it is not possible to add or change the values in the Lead Status field.

Can i Change/Update the Lead Status using Action profile of Activity.

Hi,
I have created one Lead, and on the basis of Qualification level action triggers and Ativity getting generated.
I want to know that it is possible by using functions(Action Profile/conditions) in activity, If i change the status reason of Activity (as Accepted) Earlier Leads status would change.(as Close)
Please resolve with solution.
Regurds,
Dipesh.

Hi Dipesh,
What I understand is, u wish to change the status of preceding lead transaction when the activity status reason is changed to accepted.
1. This functionality can be achieved using ORDER_SAVE Badi. This Badi implementation shall check the activity reason changed to accepted, if yes, read the doc flow, get the lead transaction and change its status to close.
2. As per my knowledge use of action profiles and conditions will not be helpful in this case.Else, create an action definition as Activity reason changed, put a condition which like Activity reason= Accepted.
In the action definition Processing type use method call.
Here u will have to create a new implementation of the BADI of action profile, and put the same logic as stated in point 1.
But in think implementing point 1 should be easier.
Wish the information is useful.
Regards,
Shalini Chauhan

How to update a custom field in declarative workflow with VS 2013

Hello,
How to update a custom field in declarative workflow with VS 2013
any help would be appreciated!!!!!
Thanks regards, Vignesh.

Dear all,
I'm using 4.6C right now, i already implement BADI MEREQ001, but this only valid
for creating PR via ME51N.
I found an EXIT_SAPLEBND_001 and tried to implement it,
but i got another difficulties since how i transfer CEBAN structure to EBAN structure.
thanks very much.
Regards,
Billy

Issue in Workflow- Field Update is not happening

Hi Friends,
I am facing an issue to update a check box field Released.
I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
for doing this task. Can some one give us some pointers on this. This will be of great help.
Thanks,
Udaya

Hi Imtiaz,
I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
Reply me at your convenient time.
Thanks a lot for your response.
Regards,
Udaya

SPD 2013 WorkFlow Status Column: Status Not Updated

We are having an issue with the status display of the SPD Designer Workflow status column which is a read only column added by SharePoint to show the status of the workflow. We have some SharePoint 2013 Workflows built using SharePoint Designer that are
attached to specific SharePoint Document Libraries. The expected behavior is for this column to show the workflow statuses (Not Started, Starting Workflow, In Progress and Completed.
Based on our observation this status is showing up although the column does get added for the Workflow that we have. Is there any other dependency for SPD Workflows that are attached to Document Libraries to show the status correctly? Any other settings/configurations
to be made?
Regards,
Vikram
Blog: http://dotnetupdate.blogspot.com |

Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Workflow status is always blank and only Internal Status is updated

Hello All
i have created sharepoint 2013 workflow but only the internal status is updated so the workflow column on the view will remain blank how to remove the internal status and use only the status field

Hi Somar,
I recommend to check if the “Automatically update the workflow status to the current stage name” is selected for the workflow in SharePoint Designer.
Please open the workflow in SharePoint Designer, select Automatically update the workflow status to the current stage name and then publish the workflow.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Ho w to create a field using workflow ?

how to create a field using workflow ?

Hi,
According to your description, my understanding is that you want to trigger a workflow only once when a item is updated.
If you want to set it programmatically, I suggest you can create a Yes/NO column called flag firstly with the default value No and set the workflow start option to manually start.
When updating the list item, you can create a ItemUpdated Event Receiver to track the update action, and in the event, you can judge the flag column value, if the value is No, then you can trigger the workflow programmatically and in the end of code set
the code to Yes ,if the value is Yes, then not trigger the workflow.
Here are some detailed code demos for your reference:
How to set and read value of Yes/No column programmatically?
How
to programmatically start sharepoint workflow
How to create an event receiver
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Runaway RAM Usage leading to Kernel Panic using FilmConvert Plugin (updated x3)

Hello, filed a bug report on this but cuious if anyone sees it.
Late 2012 27 iMac, top line i7 with 680MX, 32 GB RAM.
Promise R6 TB RAID.
Trying to render out a 15 min edit from Premiere that has each clip with 3 filters on it - MB Looks, MB Colorista, Filmconvert.
Since 7.01, every time I render previews or encode out, RAM use skyrockets way past the 25GB I allocated. I get up to a 50GB swap file in fact before the computer just craps out and I can't finish my render. (Nothing past 15 min anyway, I can do under that length ok.) As of this moment PPro Headless in Activity Monior has allocated 40GB and climbing....
Any ideas? Kind of a major issue. Does not happen on CS6 with same filters and similar project.
PS - The same issue is happening with the same project on my Macbook Pro 15" retina with 16GB of RAM. It's creating a huge swap file. On the iMac with Fusion drive I can't complete the render at all due to the system SSD filling up on the Fusion drive. It eventually crashes and reboots. I can complete the render on the laptop, but it ends up with a 50+ GB swap file.
UPDATE 1:
I had my suspicions a Plugin I am using, the excellent (but now unusable for over 10 min projects) plugin "FilmConvert" was causing the issue on all my Macs.
To prove it's the plugin, I removed duplicated my main 15 min sequence, removed the FilmConvert plugin from all clips while keeping the two Magic Bullet effects on. So, all filters (MB Looks, MB Colorista II) BUT filmConvert.
Result?
RAM usage stays where it should be (at the limit set in Premiere Pro CC) and there is zero swap file usage. Same project, same filters, same everything except FilmConvert was removed on this duplicate timeline.
As it stands, the plugin is unusable for longer projects. I'm still curious if anyone else has seen this, or if Adobe has any input.
UPDATE 2: I developed a workaround workflow and the vendor wrote back and thinks it's a bug in PPro CC, but will try to see if they can't code around it:
"We have had one other very recent report of this type of behaviour, but when rendering through the CC version
of Adobe Media Encoder or Premiere (but not After Effects). I believe the issue is with Media Encoder / Premiere,
although it's probably preventable within our plugin. The problem I believe is that Premiere and Media Encoder
create many instances of the plugin during a render, one instance per frame, and it seems in CC those instances
do not get cleaned up until after the render finishes.
As each plugin instance is expecting to be called many times, to render multiple frames, it keeps a certain amount
of memory allocated, in order to gain a speed advantage."
I am using the render previews workflow to deal with it for now. I set my sequence to my master codec (in this case ProRes 422 HQ, with maximum quality checked). Then I preview chunks of the timeline setting in/out, render. Then I quit the program, which frees up the RAM and the need for the swap file, which starts reducing itself. Then I run PPro again, and preview another chunk, and repeat the process until done.
To export final piece, I just export using previews matching the sequence (which is ProRes 422 HQ) and it is a straight copy at that point and quick. This is a useful workflow if you are making tons of minor edits for a client anyway, as it vastly speeds up re-renders of the final file. No loss in quality as the previews are the same as my final encode would be anyway.
Still, it would be nice if Adobe/FilmConvert or both could fix this bug so I can just queue up a whole sequence and walk away without chunking it up if I need to.
Update 3: If only Adobe could move so fast. Rubber Monkey sent me a new version to test today, and it fixed the problem. Amazing customer service!! It has not been released yet but I suspect it will be at some point. Case closed.

Glad I'm not the only one. My temporary solution was to download the kernel and wl package from December 2012 found http://repo-ck.com/PKG_source/ and then mkpkg and install it. It'll work as an alternative for now, without messing up the primary kernel setup.

Get the Last Value of Status Field from SQL TABLE using SQL 2008

I have a table with Fields such as
UploadstartTime, UploadEndtime, STATUS From TBLA.
The STATUS Field, has values =7 and 11 are failed and 12 is SUCCESS. I cannot do a max, since it will always show 12, I need to get the MAX(UPLOADENDTIME, and get STATUS For that record. How can I do that using 1 SQL Query?
My current code is: The issue is
select
TBLNAME
MaxUploadstarttime
=
max(UploadStartTime),
MaxUploadEndtime
=
max(UpLoadEndTime),
Status=max(status)
from DB.DBO.LOGTABLE
p1

Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. You failed! Temporal
data should use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums.
>> I have a table with Fields such as <<
Fields are not columns! There is no generic status in RDBMS. Putting “tbl-” in a table name is called tibbling and we make fun of people who do it (Google Phil Factor's humor columns. If you were polite is this what you wanted to post?
CREATE TABLE Something_Uploads
(upload_source_name CHAR(15) NOT NULL,
upload_start_timestamp DATETIME2(0) NOT NULL,
PRIMARY KEY (upload_source_name, upload_start_timestamp),
upload_end_timestamp DATETIME2(0),
CHECK(upload_start_timestamp < upload_end_timestamp),
upload_status INTEGER NOT NULL
CHECK (upload_status IN (7,11,12, ..))
>> I cannot do a max, since it will always show 12, I need to get the MAX(UPLOADENDTIME, and get upload_status For that record [sic]. How can I do that using 1 SQL Query? <<
Since you told us nothing and gave no sample data, want to correct this postign?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Lead Status Field Updation Using Workflows

Similar Messages

Maybe you are looking for