Cannot add popup LOV to existing update form for interactive report

I have a requirement to add a popup LOV to an existing interactive report with an update form in apex 4.0.2.00.07. I have an insert form as well form the interactive report and was able to add the shared LOV as a popup correctly (so the issue isn't with the popup LOV definition). However, when I add the popup LOV to the update form, the field does not show up when I run the application. There currently isn't any data in that column of the table in the db (I'm adding the field so that users can update the data with the LOV return ID). Is there something I should look for that is keeping the field from showing on the screen that i have to check or uncheck?
Edited by: user11201107 on Apr 5, 2011 1:46 PM

Either write a classic report and implement your own filters, and use those on your update function, or try to retrieve the where clause Apex uses in the IR.
This blog from Stew should help you on your way:
http://stewstools.wordpress.com/2009/02/19/get-ir-where-clause/

Similar Messages

  • HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • Parameter form for web report

    Hello,
    Using rwservlet on the web I can specify paramform=yes and I'll get a parameter form for my reports, which is really handy as it saves me from having to build my own forms. However when I run JSPs directly I cannot seem to get the automated form. Am I missing something obvious or is the parameter form just not available when you run JSPs directly?
    Cheerio,
    Robert

    Hi Robert,
    The description of the command line keyword PARAMFORM in Publishing Reports manual says:
    Use PARAMFORM to specify whether to display the Runtime Parameter Form when you execute a report via CGI or a servlet. PARAMFORM is used only to supply parameters to paper layout reports, not Web source reports.
    For JSP reports you need to create an HTML parameter form which calls the JSP and submits the parameters selected.
    You can find Reports documentation (incl Publishing Reports here):
    http://www.oracle.com/technology/documentation/reports.html
    Navneet.

  • How apex generate LOV values for Interactive report

    Scott,
    For interactive report, does APEX full table/index scan to generate the LOV drop down list every time user click the column header? If I set max row count to 100, does LOV values only derived from the first 100 rows that apex hits?
    If I enter SQL query in "list of value definition", will that sql get executed every time users click the column header or the result is cached?
    For standard and interactive report, does APEX parse (soft/hard) the sql statement again when user do pagination?

    Hi N.Raj,
    {thread:id=2245456}
    Yes you have to Configure BI Publisher or other.
    {thread:id=2242147}
    Hope it helps!
    Regards,
    Kiran

  • Popup Lov in Master Detail Form

    we are working on a master detail form that is based on orders and products. we can view all products, that are contained in one order.
    In the order part, we can choose a field to be of the type: "Popup Key LOV (Displays description, returns key value)"
    However in the products part we do not get to choose this option. Is there a way to realize that?
    Also we would like the users to be able to add an entry to the popup list, but we cannot find where to edit the popup form.
    regards
    maik and chris

    how can i branch from the popup lov to the insert page?
    also, how can i have the produkt name displayed instead of the product id, after choosing an entry from the popup lov. (in the order part i can choose this as an option, but in the products part, i can't)

  • Only 2 choices for popup lov in an updatable report ?????

    Help please !!!!!!!
    Another question regarding an popup lov item in an updatable report
    The is only 2 choices for popup lov :
    popup lov(named lov)
    popup lov(query based lov)
    and if I want to display a descrition and return a key ?????
    Thnaks for help!

    jina--
    please try to not bump your posts up after only a few hours. i'm sure you understand that, but i thought i'd say it just in case. about your issue, you can create your own tabular form and use htmldb_item.popupkey_from_query or htmldb_item.popupkey_from_lov to achieve your desired effect. there's a great howto doc on manually creating tabular forms at..
    http://www.oracle.com/technology/products/database/htmldb/howtos/tabular_form.html
    and know that i've logged your request to have this feature available declaratively.
    hope this helps,
    raj

  • Is there a problem using popup LOVs in a portal form with a bind variable?

    I have a portal form with 2 LOVs. The second LOV is a dependent LOV whose bind variable can be NULL. I have read Note 263923.1, "How To Create Dependent Lovs In Forms", and my form works as long as I use combo boxes to display the LOVs. I need to use popups so the user can search the LOVs as they are quite lengthy. Plus I want to be able to pick a value from my second LOV without selecting a value from the first LOV -- hence, my bind variable can be null and that is where my problem lies. As long as I select a value from the first LOV, the second LOV popup will work. If I click on the icon to display the second LOV without pre-selected a value from the first LOV, I get the following error:
    POPUP LOV ERROR:
    LOV: "9A17692880B6B8509F514F5B9CA9EC808DD403218B3CF19A33C04CD1FAB0ADE17ADC33E6B67998A933357CE5264D204E"
    Parse Message: Parse as pre-set global: "TORE".
    Find Message: LOV is of type DYNAMIC (LOV based on SQL query).
    Query: "SELECT ...."
    wwv_bind.prepare_bind: ORA-01403: no data found
    My form is based on a table with a custom layout. The sql for the second LOV is similar to: SELECT ENAME, EMPNO FROM SCOTT.EMP WHERE (DEPTNO = :DEPT AND :DEPT IS NOT NULL) OR :DEPT IS NULL.
    Thanks in advance for any help,
    Carol

    Don't use EPS any more! It does not support transparency nor color management.
    If you save vector files from Illustrator, use AI with PDF compatiblity.
    If you save image files from Photoshop, use PSD.
    If you save image files combined with vector forms and/or text from Photoshop, use PDP which is a Photoshop PDF.
    For vectors from Illustrator use CMYK files.
    For images use RGB, conversion to CMYK should never done before PDF export, better, if the printer allows it, is to export a PDF with live transparency as it is PDF/X-4
    If the printer requires a PDF with CMYK only export a PDF/X-1a.

  • Disks not avialable and cannot add new disks to existing pools

    I have a few disks that are RAW and I want to add them to existing pools.  However, only 1 disk shows up as a Primordial disk and the others do not.   I cannot add these drives to a new volume and when I try to add any drive to an existing
    pool, the add disk option is greyed out.  I have search everywhere to resolve this but no luck.
    What is interesting is one of the drives that shows available for a volume is the drive I have associated to backing up the OS on the server itself and is initialized, i.e. not RAW.

    Hi,
    Please try to run the following commands in PowerShell to obtain the information about disks:
    Get-physicaldisk
    Get-disk
    In additional, the physical disk added to a storage pool must be 4GB or larger. If the space is less 4GB, the disk will not appear in the storage pool window.
    For more information, please refer to the thread below:
    Storage Pool in WS2012
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/d230ef80-8791-4eaf-84b5-a41b8f7fef10/storage-pool-in-ws2012?forum=winserver8gen
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot add Connected Service in asp.web form project in vs 2012

    Hi All,
    I m trying to add  Connected Service in asp.web form project in vs 2012 as shown below image. But my VS 2012 doesn't has that option as shown second image. Any help please.
    First image
    Second image 
    d.n weerasinghe

    Hi,
    If this is not a SharePoint related question, I would suggest you post it to Visual C# forum, you will get more help and confirmed answers from there.
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=csharpgeneral
    Best regards
    Patrick Liang
    TechNet Community Support

  • After upgrade to 3.1.2, date pickers and popup lovs mess up the form layout

    Now there are new table tags around every single date picker / popup LOV item and its' list icon which forces other items on the same line to the next one instead. Bad Oracle, bad!
    Any workarounds?

    Hello,
    >> Now there are new table tags around every single date picker / popup LOV item and its' list icon which forces other items on the same line to the next one instead.
    APEX 3.1 introduced the use of the <fieldset> tag, for wrapping compound items, like the date picker or popup LOV items. In the following, you can learn more about it, including some workarounds:
    FIELDSET – new layout behavior in 3.1.1
    >> Bad Oracle, bad!
    For the very short term, and especially for upgraded applications, you might be correct; however, for the long run, this is a good move, because it creates uniformity in the ways we can handle all the APEX built-in item types.
    Regards,
    Arie.

  • Using a LOV in an Update page for a QBE Report

    In my QBE Report-based portlet, I have set one of the fields to use a LOV.
    When I go into Customize for the portlet, that field uses the LOV, but when I click on the Update link for a row, the same field does NOT use the LOV.
    How do I make it use the LOV in the Update page?
    Thanks for any help!
    Regards
    Bryan

    Folks --
    Is this question a difficult one?
    I'd appreciate even a pointer...
    Thanks
    Bryan

  • Strange behavior when Popup LOVs has read-only condition and Bug Report

    Hi,
    I observed an inconsistent behavior of Popup LOVs when the read-only condition is true. In that case the defined lov query is used to map the internal value of the page item to the display value defined in the lov query.
    What is the reason for this behavior? Because if the Popup LOV is in "edit mode" the page item value is just displayed without looking up the display value. The display value is just used for the popup lov. Mapping the value is normally a behavior of the popup key lov.
    -> The result is that different values are displayed if the page item is in edit or read-only mode. That's not really the behavior someone would expect.
    BTW, there seems to be a bug with "Display Extra Values" set to "Yes" in the case read-only is true. If the lookup doesn't return a value it just displays [ ], but because the property is set to yes it should display the value. The Popup Key Lov has the same bug.
    Thanks for bringing some light into that behavior
    Patrick
    Oracle APEX Essentials: http://essentials.oracleapex.info/
    My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

    Patrick,
    I've added your comments to a task already in our queue to examine all item types for correct behavior in read-only mode. I've noticed the quirks with display extra values also.
    By the way, still interested in your thoughts re: Re: Bug Report: Images broke when using get_blob_file_src and not authentic .
    Scott

  • Cannot add popup to JTree

    Have implemented JTree treePanel using DefaultTreeModel.
    Created popupMenu.
    Created JTextArea output.
    In the end of createPopupMenu() method add following:
    treePanel.addMouseListener(popupListener);
    output.addMouseListener(popupListener);
    Result: Popup added to JTextArea and didn't add to JTree.
    (When I right mouse click on JTextArea, popup appears and when on JTree -- not)
    What is the problem? What is difference between JTextArea and JTree?

    Ok, the problem is following:
    class PopupListener extends MouseAdapter {
    JPopupMenu popup;
    PopupListener (JPopupMenu popupMenu) {
    popup = popupMenu;
    public void mousePressed(MouseEvent e) {
    maybeShowPopup(e);
    public void mouseReleased(MouseEvent e) {
    maybeShowPopup(e);
    public void maybeShowPopup(MouseEvent e) {
    if (e.isPopupTregger()) {
    popup.show(e.getComponent(), e.getX(), e.getY());
    In GUImain class:
    public Container createContentPane() {
    tree = new MyTree();
    contentPane.add(tree, BorderLayout.PAGE_START);
    output = new JTextArea(5, 30);
    contentPane.add(output, BorderLayout.PAGE_END);
    public void createPopupMenu() {
    JPopupMenu popup = new JPopupMenu();
    // Create menu items
    MouseListener popupListener = new PopupListener(popup);
    output.addMouseListener(popupListener);
    tree.addMouseListener(popupListener);
    Popup menu appear on right click on output.
    tree doesn't react on right click.
    How to bind popup menu to JTree?

  • I just upgraded to itunes 10.7 and i cannot add any of my existing itunes music to my iphone 4s

    i cannot down load any music to my iphone after upgrading to the new itunes program.  I see it show up in my phone but it is all grayed out and i see the sync icon in itunes and i get the error message from the iphone saying to check itunes for the selection did not sync.  This ***** for i just got the new dave mathews cd and cannot get it onto my phone!

    Right before upgrading to ITunes 11, I was able to add a movie clip (home video).  Now, can't add any either!
    BUT I noticed that when I went to "Recently Added" (music)...lo and behold there were the videos that I tried to add but I couldn't see them under Movies!!!. You are able to get the info on them and everything (same type and encoding like my old ones). 
    So to get access to them in a somewhat organized fashion, I dragged the new movie clips into a playlist so I can access them indefinitely until the issue in Itunes gets resolved.
    I was still determined to get them into the movie category, so I went into "Music Videos" and "Edit" - "movie kind is" selected "Movie"  and tried dragging my new movie clips (tried from both "recently added" and the new playlists)  into "Music Videos". It looked like it dragged properly...but my movie count was the same - no success.
    For now I am able to play my new movie clips from the new playlists or from "Recently Added".
    Hope this issue gets resolved quickly. 
    p.s. There is nothing under "Home Videos" so it didn't accidently go into this category.
    Anyone else see the recent adds under "recently added"???  If so, then this should be a fix and not something we need to reinstall....

  • Cannot add AirPort TC to existing wifi network

    Tried severla times to add APTC 3 TB (newest release) into existing wifi network using either iPhone or MacBook Air AirPort Utility. It does not work, as I receive an error message "An unexpected error occured. Try again"

    It is difficult if you try and do setups Apple does not support.
    Connecting to existing wifi network is not supported. You can do it but it is the worst possible setup and definitely to be avoided.
    Is it not possible for you to connect to ethernet on a modem or router?
    If you must here are instructions to setup "Join a wireless network"
    https://discussions.apple.com/thread/5719954?tstart=0
    If you run into trouble .. take some screenshots and post them.
    Be fully aware of what you are doing.. you are taking an expensive unit.. and making it a dumb client.. you lose all advantages of the new Gen5 TC.. you may as well have got a cheap Gen4 from the refurbished store.
    No wireless AP and no ethernet ports.. and slow slow wireless double hop backups on whatever your existing wifi is.

Maybe you are looking for