Cannot change image size dimensions

the program will NOT let me enter values or change dimension values, can anyone help?

Did you check the "Resize" box?
We really don't know what application you are referencing, what platform you are on, Mac or Windows, nothing about your setup, nothing, nothing, nothing…
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details, wicked brent.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user nor a subscriber to CC etc.).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

Change image size on list Field

I have list library which has column of "Person or Group" and selected "Name with (picture)". But i cant change image Size there. its always 62x62. How can i change it?
any idea?
Regards,
Lasantha

How exactly are you wanting to change it? height and width should just be attributes in the element... so.. probably the most simple (but not exactly elegant) way to handle this is to use jQuery.
If you drop the following script into a Content Editor Web Part on your page, it will resize all the profile pics to 100x100. (change the numbers to the size you want):
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script>
<script type="text/javascript">
jQuery(document).ready(function($){
$("img[width='62']").each(function()
$(this).attr("width","100");
$(this).attr("height","100");
</script>
Some Caveats:
1) This script resizes ALL images that have a width of 62. So, if you have some other random image on your page that is 62px wide, it will find it and resize as well.
2) I'm references the jQuery library externally which I do not usually recommend, but at least you can drop this script in and it should just work.
Again, not elegant, and I'm sure someone smarter than me can improve on it, but it should at least get you what you need.
Good luck!
Mark

Change Image Size in existing Video Project?

First post, Premiere NOOB. I have a Premiere Pro CS6 developed video that I had done for me for which I also got as part of the receivables all the component Premiere files so that, 1) I could make minor changes myself (I have CS6), and 2) if the developer was unavailable in the future (which is the case), I had everything needed to continue the project.
The video includes a Star Wars style screen crawl. It was originally developed to fit inside an existing PowerPoint presentation in the traditional, not widescreen, format. Now I want to post this on YouTube. I have made text changes to the crawl and such and it works fine, except the background image is still narrow and thus there is black space on either side of the video when rendered, which also then shows in YouTube. The original background image in the file is plenty large enough to cover a full HD width. Is there a way to just expand the background image to cover the entire widescreen without changing anything else?
TIA,
Doug

Jerry Klaimon wrote:
1. What are the pixel dimensions of your original sequence?
2. What kind of file is your Star Wars title in, and what are the pixel dimensions?
3. Same question for your background.
1. 1024 x 768
2. There are two "titles", not sure which one you mean. One is a take off of STAR WARS the other is a take-off of the Lucas Film LTD intro
Type: PNG File
File Size: 98 KB
Image Size: 1024 x 768
Pixel Aspect Ratio: 1.0
and
Type: QuickTime Movie
File Size: 82.9 MB
Image Size: 1024 x 768
Frame Rate: 29.97
Total Duration: 00;00;07;24
Pixel Aspect Ratio: 1.0
3.
Type: JPEG File
File Size: 1.9 MB
Image Size: 1952 x 1300
Pixel Aspect Ratio: 1.0
Would it be helpful if I upload the entire project with its included files to a ZIP file in DropBox?

Cannot change page size with acrobat

I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.

Thanks.
The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
From Word go to File> Print
Open the Copies & Pages dropdown
Select Paper Handling
Check the Scale to fit paper size box
Open the Destination Paper Size list
Select your custom 6x9 Preset
Click the PDF button
Select either Save as PDF or Save as Adobe PDF
The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help.

Change image size in web display of SRM MDM 3.0

Hello,
how can I change the size of the displayed images in the catalog?
I would like to display the image in the detail of the material data in the catalog larger.
The images are stored in in the repository.
Thanks for your help.
melanie

You can change this in the Web UI interface. In the Customize Display tab you can specify the size of you images to be displayed in pixel.
The UI interface that I'm talking about is where you change your OCI mapping, Search... etc
If you want to crop, resize your uploaded images you can do this in MDM Data manager.
Edited by: Joy Natividad on Mar 3, 2010 7:08 PM

Cannot change column size in iPod Classic

I received my Classic today and transferred over all my music. After making changes to various things, I tried to adjust the size of the columns. I cannot.
I was able to delete a column, then re-add it then change the size. In my 5th Gen Video ipod I could just but the cursor on the right side of the column and click, it would adjust to the size of the largest, Name, Artist, Album etc. I am able to change column sizes in itunes, just not the ipod.
I've looked through threads to find something that resembles my problem but most seem to be with itunes and not the ipod. Both computers I use are updated to 7.4.1
I was wondering if I restore the factory settings would I be able to change the column sizes without having to delete and re-add them? Or is this another new lovely and VERY annoying update to itunes/ipod?
Thanks.

I can confirm that it's not (specifically) your iPod and it's not your OS. I'm running the newest iTunes through Mac OS 10.3.9 with a 3G iPod and just made a playlist with the same problems. NONE OF MY OTHER PLAYLISTS are affected - the columns there adjust just fine, but any NEW playlists I generate on my iPod will not allow me to individually adjust columns. Right-clicking on a column header does not even allow me to "Auto Size Column", but only to affect ALL the columns, or choose a column to add or remove.
Interestingly enough - new playlists I generate in iTunes (not on the iPod) work normally. However, it isn't feasible for my 10GB hard drive to automatically sync with my 15GB iPod, so I can't test and see if dragging a playlist to the iPod will generate one with alterable columns.
My opinion is that this is in some way related to the 7.4 or 7.4.1 update. I believe I last generated a playlist before the 7.4 update, and had no problems.

Change image size dynamically in BIP report

Can we change the size of image dynamically in bip report. If yes can I get some doccument or samples on it.
Thanks
Aj

I am doing small POC
I have a rtf template with three sample images on it with three different sizes for 1” by 1” , 3” by 3” and 5” by 5”.
I have a standard size of 2” by 2” image in my server (Could change size in future depending on req)
Now when I run the report the template should call the standard image from server and replace the sample images on the rtf and show the the standard image in three different sizes.
Pls let me know if i am missing something

Change image size of 42HL800A

Hi,
I am having trouble changing the size of my tv image so that it fills the entire screen. Currently I am watching satellite TV through a set top box that is connected to the 42HL800A.
There always seem to be two bars of 'blackness' on either side of the image.
I have tried usng the 'auto format' feature and the 4:3 stretch of the TV but the bars remain. Can someone tell me if I can stretch the image to cover the entire screen?
Thanks for the help.

Hi
If you use an Satellite set top box, you should check the settings there.
The TV receives the signal from the set top box so if the set top box is set to 4:3 or letter, the picture on the TV will appear in the same format even if you would change the TV setup.
So recommend checking the set top box configuration

I click on layouts and still cannot change book size

I'm trying to change the size of the ibook before I buy it. I've tried several options buy cannot figure it out. Any help would be appreciated.

duplicate the book for safety and then click on themesand select teh same theme with a new size
LN

HT201279 Cannot change font size

Am having trouble changing my font size when printing some emails and attachments . So small i cannot read .When I do change the size it changes back when I start to print . Anyone have the same problem .

I have stopped using Text Edit as I find it flaky. Instead I prefer Bean:
http://www.bean-osx.com/Bean.html
which does not have that problem!

Regular selection tool cannot change object size

I am using CS6. When you create a simple square or any object, you will be able to use the regular selection tool to change the size by draggin on the "control point" around the object.
However, I was able to do it before but I dun know why I can't do it suddenly. The regular selection tool just enable me to move the image even I click on the "control point" on the object. If I need to change the size, I need to use the resize tools which is a hassle.
Anyone knows what happened? Am I having some wrong setting in my AI ?

View > Show Bounding Box

How to change image size defaults

Hi all
I have a burning question. In CS4, when I use the Image Size command, the default units are centimetres instead of inches under Document Size part of the dialog box.
I know that keeping rulers set to inches will change that default, but I distinctly remember the time when I was able to keep my rulers set to pixels, and my Image Size to inches at the same time.
Something changed at some point and I can't figure out what. How can I keep my rulers set as pixels, but the Image Size dialog box to inches at all times?
-iVan

Problem solved by a fellow 'shoppist at another forum. He suggested changing the regional settings in control panel and restarting a computer, as he felt that was the culprit. Well, regional settings did it indeed - caught red handed AND with a thong in a purse.
Allow me to paraphrase a rant I already vented on the aforementioned forum: See, I'm in Canada. That means we're officially metric by executive decision. Only, no one ever bothered to tell us, the mindless minions, so we still scurry about our busy little lives oblivious to the existence of a centimeter, while fully engaged in an affair with an inch (or more).
Whoops, pardon - here in Canada it's spelled centimetre.
But every once in a while someone here will stub their toe on a stray "centimeter" (I'm trying to get fired from being a Canadian). And when that happens, since we can't actually see them, we just stare into an empty half-inch space wondering what possibly could have caused a hiccup in space-time continuum.
Microsoft had other plans though. It planted the invisible centimeters into the operating system that are triggered by regional settings. Settings that are officially metric, even if in reality they don't exist, just like the Hobbits, ET's and southern democrats.
OK, rant is over!

Is there any options/addons for selecting/changing image size when viewing images?

When clicking to open images when on web pages there is no option to select size.
I'm looking at some pages that have images (mostly jpg) I like to compare and that is very hard when all images open in a size that normally fill most of the browser window.
So I wonder if there is some hidden options or addons for selecting image size when opening images for viewing?
I have tried Image resizer/scaler, image zoom and show picture with mix results. Image resizer/scaler and image zoom allow resizing of images, but when opening images on same tab as web page the white image "frame" that is visible when reducing image size is left in original size. This make viewing and opening other pages a hazard.
I'm grateful for any help...cheers :-)
Picture of white frame
http://s25.postimg.org/z1ubo6zun/Remove_Exterior_Fog_at_Skyrim_Nexus_mods_and_c.png

hehe no offense, but I'm not following the version rushing from Mozilla. I'm using many customizations and addons and it is a nightmare to change to a new version and practically impossible to use last version. Also the FIrefox history have shown that earlier versions have both been more stable and had better implementation of features.
Spending hours customizing and finding out that addons dont work with new version every time Firefox come with a new version , no thanks. For that to happen Firefox have to be more compatible across versions and more friendly toward customization in updates and new versions. I have used Firefox for at least 8-9 years with practically no security problems and one thing I have learned is: dont update or install next version if the version I have is working well.
Maybe I should have mentioned this in this question, that Im using v26 and that my FIrefox is heavily modified with addons and customizations.
'''Back to the subject'''
Anyway I dont think any of my customizations or addons should create a white frame behind images, but I'm asking to find out if you guys also get this white frame when resizing pictures to a smaller size after clicking images for viewing.

PictureLibrarySlideshowWebPart - Change image size to original size

Hi,
I'm using the PictureLibrarySlideshow Web part as image slider in the banner of a SharePoint website. Apparently this web part changes the image size so it is smaller than its original size.
Is there a simple solution to solve this and resize the image? I found some Jquery solutions but they did not fix the problem.
Thanks!

Hi
Ward010 ,
In Slideshow web part, picture is initialized with field value that contains the Url of Web image (EncodedAbsWebImgUrl field). Unfortunately it is not supported to configure in web part what image
type (original, web or thumbnail) should be displayed in Slideshow The solution that demonstrated below allows to display original images instead of web images in Slideshow web part.
In order to specify original images, method overriding for picture initialization is used:
function SlideshowObjectInitializer() {
ShowPic = (function(ShowPicOrig) {
      return function() {
           var ssObj = arguments[0]; //SlideShow object
           var curPicIdx=ssObj.index; //current picture index
           ShowPicOrig.apply(this, arguments); //call original ShowPic
           //apply some changes to display original picture in SlideShow control
           ssObj.image.src = ssObj.linkArray[curPicIdx]; //display original image instead of web image
           //change picture & container size to auto instead of fixed (by default web image size is used)
           ssObj.image.setAttribute('height','100%');
               ssObj.image.setAttribute('width','100%');
               var cell = ssObj.cell;
               cell.style.width = 'auto';
               cell.style.height = 'auto';
               cell.style.display = '';
               var pcell = ssObj.cell.parentNode;
           pcell.style.width = 'auto';
               pcell.style.height = 'auto';
})(ShowPic);
ExecuteOrDelayUntilScriptLoaded(SlideshowObjectInitializer, 'imglib.js');
Save      JavaScript code to the file, for example in SlideshowObjectInitializer.txt      and upload it to SiteAssets Library
Add      CEWP on page where Slideshow web part is located and in the Content Editor      tool pane, under Content Link property,
type /SiteAssets/SlideshowObjectInitializer.txt
Reference:
http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
Please inform me freely if you have any questions.
Thanks

Cannot change image size dimensions

Similar Messages

Maybe you are looking for