Cannot change to Production mode using WLST

Is it possible or may be it is bug?
Even <pre>configToScript()</pre> command throws an exception
when i'm trying to convert a Domain with <i>Production mode</i> enabled (created with Configuration wizard)!

Since DomainMBean.ProductionModeEnabled attribute is non-dynamic, you may want to restart your server immediately after you change that attribute using WLST.
If you still get exeception for configToScript() command after server restart, please attach the exception stack trace.
Jason Zheng
BEA Systems

Similar Messages

I started my account with a gift card. I have $0.68 credit remaining and I cannot change my settings to use a new gift card. What should I do?

I started my app store account with a gift card. I have $0.68 credit remaining and I cannot change my settings to use a new gift card. What should I do?

Done what? All you can do with an iTunes gift card is redeem it:

After using firefox to set the desktop wallpaper i cannot change the wallpapre without using firefox

i cannot change my desktop wallpaper unless i am online using firefox

Open a image in windows 7 and right click choose set as wallpaper.
if you think its firefox problem, try in safemode. and try the above line
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Cannot change default email when using MDM

I use an MDM (AirWatch) to setup Exchange ActivSync email for all my users. It sets up a profile with the user's email. If they have other personal email addresses on the phone, they cannot change the default email to Exchange email that I setup through the MDM. It is not an option in the Settings-Mail/Contacts/Calendars-Default Account field.
The option to change the default account for the default Calendar is there, but not for email.
When I email by clicking on an email address in a website it opens Mail, but the Exchange email is not option.
If I manually setup the Exchange email I can select it as default.
If there are no other personal emails setup the Exchange that is setup from the MDM it will mail from that account.
Any thoughts?

I figured out the issue. The MDM (AirWatch) has a feature of the ActivSync setup called "Prevent use from third party apps"
This stops the Exchange ActivSync email account from being able to be set as the default account Settings-Mail/Contacts/Calendars-Default Account field.
I do not know why they think that the Safari browser built into the phone as a "third party app" but atleast we are working.

JMS Runtime - production pause using WLST OR runtime mbeas ?

hi there,
is there any way to script the "production pause" and "production resume" of JMS Server at runtime using WLST or any other script?.
need help at the earliest.
regards,

USER='weblogic'
PASSWORD='weblogic'
ADMIN_URL='t3://localhost:9000'
SERVER_NAME='ManServer_1'
JMS_SERVER='JMSServer_1'
JMS_MODULE='Module.1'
DESTINATION='Queue.1'
connect(USER,PASSWORD,ADMIN_URL)
domainRuntime()
cd('ServerRuntimes/'+SERVER_NAME+'/JMSRuntime/'+SERVER_NAME+'.jms/JMSServers/'+JMS_SERVER+'/Destinations/'+JMS_MODULE+'!'+DESTINATION)
cmo.pauseProduction()
disconnect()
exit()
For resume use cmo.resumeProduction()
Edited by: atheek1 on Jun 11, 2010 5:56 AM

Deploying mappings by changing Source/production system using OMB Scripting

Hi Mark,
I am now trying to deploy my mappings from DEVELOPMENT environment to PRODUCTION environment.
Now my mappings are point to DEVELOPMENT Source System and DEVELOPMENT target system. When I deploy these mappings should point to PRODUCTION Source System and PRODUCTION target System.
I could get some help from the forum for deploying the mappings point to PRODUCTION target system, but I couldnt find any help how to change the Source System Location. I have exported all my mappings (.xml files) in the C:\OWBDeploy directory.
How do we register and unregister a location using OMB Scripting?
How to write a batch deployment action without using deployment manager?
Provide a example to deploy the mappings using OMB script
for both source and target systems locations.
I am using Oracle 9.2, OWB 9.2.0.2.8, OWF 2.6 and OMB 9.2.0.2.8.
Regards,
Shreedhar

Below script will deploy all the mappings in a module. It can be used with filter condition like mappings which start with M_D or M_F also. Above script will deploy mappings very effectively comparing with GUI. Frequent problem in OWB mapping execution TASK not found error will not occur, if we deploy the mappings using above scripts.
Steps to Deploy All Mappings in a Module
Start the OMB PLUS from Command Prompt or Start Menu
Change the context to the respective Project
Connect to Design Repository
Register the Location Properties if the deployment is happening first time in the target schema.
Change the context to the respective Module
Use foreach and OWBCREATE command to create a Deployment Plan for Droping if any previous deployment for all mappings
Use foreach and OWBCREATE command to create a Deployment Plan for Newly Deploying the Mapping
Use foreach and OWBDEPLOY command to run the Drop Deployment Plan
Commit
Use for each and OWBDEPLOY command to run the Create Deployment Plan
Example
OMBCONNECT mis_owb904_rep/[email protected]:1521:ulyut03s
OMBCC '/IGMS_MIS_GEMNCAP_FOC'
OMBCONNECT RUNTIME 'ST_DWH_RUNTIME_FOC' USE PASSWORD MIS_RT_OWNER
OMBREGISTER LOCATION 'ST_LOC_CURRENTMISTARGET_FOC' SET PROPERTIES (Host, Port, Service, Schema, Password) \
VALUES ('10.202.148.176', 1521, 'ULYUT01M','MIS_OWNER', 'MANAGER')
OMBCC '/IGMS_MIS_GEMNCAP_FOC/CURRENTMISTARGET'
foreach mappingname [OMBLIST MAPPINGS] {
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN '$mappingname.DROP' ADD ACTION '$mappingname.DROP' \
SET PROPERTIES (OPERATION) VALUES ('DROP') SET REFERENCE MAPPING \
'/IGMS_MIS_GEMNCAP_FOC/CURRENTMISTARGET/$mappingname';}
foreach mappingname [OMBLIST MAPPINGS] {
OMBDEPLOY DEPLOYMENT_ACTION_PLAN '$mappingname.DROP'
OMBCOMMIT;}
foreach mappingname [OMBLIST MAPPINGS] {
OMBCREATE TRANSIENT DEPLOYMENT_ACTION_PLAN '$mappingname.CREATE' ADD ACTION '$mappingname.CREATE' \
SET PROPERTIES (OPERATION) VALUES ('CREATE') SET REFERENCE MAPPING \
'/IGMS_MIS_GEMNCAP_FOC/CURRENTMISTARGET/$mappingname';}
foreach mappingname [OMBLIST MAPPINGS] {
OMBDEPLOY DEPLOYMENT_ACTION_PLAN '$mappingname.CREATE'
OMBCOMMIT;}

ID CS3 - Cannot change image color (imported using "Place")

Hello. I'm using ID CS3, Windows XP, SP3.
I am new to ID CS3, coming from PageMaker 6.5, and when I converted one of our brochures, everything looked great. In fact, we have some images that are tif's (I think this means it's a bitmap). The images are black and white (they are apples). Our print process is Black and a Spot Color, so the apple images are the spot color.
The converted PageMaker6.5 apples are great, they are the spot color, and when I change the spot color, they change too. If I add a new apple image through the Place command, even the exact same file, it imports as black and white, not with the spot color. In PageMaker6.5, this is how it worked, and then I would select the image and then select the spot color. In CS3, when I select the image, and select the color, it either colors the stroke or fill. Obviously I don't want the stroke, and the fill doesn't affect the apple, only the white behind the apple, so I end up with a still black apple on a colored background in the rest of the frame.
What I want is:
Background: Paper or None
Apple: Spot Color (at this point, any color would be fine)
I have tried applying styles, object/character/paragraph, I have tried the Object->Image Color Setting as found on Adobe help area, except this option is grayed out. I have tried Place, and while selecting the file, selecting "Show Import Options" but it grays out all options when the pop-up box appears. I can't figure out what else to do.
Also, I can't change the PageMaker6.5 apples to any other color, they are stuck on spot color.
The problem seems to be I am not targeting the black part of the image itself, yet I can not figure out how to do so. The images are made in Photoshop 6. Thank you for any help you can give (I also have an import jpg file, which has the exact problem of any color changes are to the white background (fill) or the stroke. But again I am unable to change the black part of the image).

Thanks, in an odd way it worked...
I dragged like you said. The entire frame became the Spot Color (meaning I could no longer see anything but a large solid block of Green). So I went to Edit->Undo, and it undid the large solid block of green, leaving the previously black image now green, exactly what I wanted. While I don't understand why the Undo command fixed it, I'm happy with the results.
Thanks.
Edit - I did it again to another apple, this time it worked perfectly without the undo command. The first time, my cursor became a hand. The second time, it stayed an arrow with a small block under it. Regardless of what happened the first time, thanks again.

Cannot add to "product in use" under my account.

I bought photoshop. I see the software in my license.adobe.com account (with all details, serial,etc), but I do not see it in my accounts.adobe.com. I have the same login for both. Can anyone help?
I tried to click on "register new product" but it does not work.
What is the difference anyway between those 2 login websites?

It sounds like you created a new Apple ID rather than changing the email address of your current Apple ID. Apps are tied to the account that they were initially installed with. So the only solution is to delete the app and re-purchase it with the new Apple ID.

Cannot change Color mode

Hello,
I was provided a file from a customer that is RGB. I need to change it to cmyk for printing. HOwever I cannot change the color mode. All my options in the Mode section under Image are greyed out. I have never seen this happen before.. Here is a screen shot of the Mode.
The image has been flattened. I am using PS cs6 on a mac. I have never seen this happen before. Does any one have any ideas?

Strange. Could the file permissions be set to lock you out?
In the Finder, do a Get Info in the file and look at the permissions. If at the bottom, your name says "read only," then you need to change the permissions to allow you to read AND write.
To change permissions, use BatChmod, but be careful to change the permissions on that file ONLY.
It's FREE at:
http://www.lagentesoft.com/batchmod/index.html
... And if that doesn't solve the problem, can you share the file?

Cant move domain from devlopment mode to production mode

We have tried to move the domain from dev mode to produciton mode but experiencing following exception. we have been using the domain in dev mode for quite long never had issue, applications used to work fine. Soon after we tried to change to production mode, all application stopped working. Is it due to the additional security that comes with prod mode? In past, we have anonymous lookup enable for domain security. Is it the issue? And should we have cross domain security enable? we have inter domain communication via t3 i.e WLX->t3->WLS and tomcat->t3>WLS.
ault (self-tuning)'> <<anonymous>> <> <> <1276584731722> <BEA-010051> <EJB Exception occurred during invocation from home: com.fares.useraccess.ej
b.UserAccessService_wrjm2t_HomeImpl@2235afd threw exception: java.lang.NoClassDefFoundError: com/fares/common/lookup/Admin
java.lang.NoClassDefFoundError: com/fares/common/lookup/Admin
at com.fares.activity.ifc.model.ActivityInfo.<init>(ActivityInfo.java:79)
at com.fares.activity.impl.util.ActivityLog.setSuccess(ActivityLog.java:146)
at com.fares.useraccess.impl.process.UserAccessProcess.activityWriting(UserAccessProcess.java:65)
at com.fares.useraccess.impl.process.UserAccessProcess.userLogout(UserAccessProcess.java:239)
at com.fares.useraccess.ejb.UserAccessBean.userLogout(UserAccessBean.java:57)
at com.fares.useraccess.ejb.UserAccessService_wrjm2t_EOImpl.userLogout(UserAccessService_wrjm2t_EOImpl.java:1385)
at com.fares.useraccess.ejb.UserAccessService_wrjm2t_EOImpl_WLSkel.invoke(Unknown Source)
Regards
RR

The error there shows that can't find a library, this usually is because a Variable such as LD_LIBRARY_PATH or CLASSPATH could be wrong or miss as well that a new or JDK version has been installed into the server and that's why the class is missed.
What is the procedure you use to change from Dev to Prod?
greetings

Web service does not work in production mode

Hi!
I created a small web service with the WorkShop in BEA Weblogiv 7.0.
If I start the server in production mode, then my service is not visible. It can
not be accessed, neither its WSDL. In development mode it works. I tried to create
an EAR file and deploy it, but when I do that in the web console, it all says
that it is deployed, but I can not access the WSDL or anything else.
Does the WSDL URL change in production mode ?
Help !
Best regards,
David

Thanks for reply.
It seems nothing matters.
I changed wlw-config file:
     <hostname>localhost</hostname>
     <protocol>http</protocol>
     <http-port>8002</http-port>
     <service>
          <class-name>com.mycom.MyWS</class-name>
          <protocol>http</protocol>
     </service>
I changed wsdl soap address
to
http://localhost:8002/MyWS/com/mycom/MyWS.jws
I deployed it to managed server at port 8002 and admin server at 7001. but still, admin server works and the other one does not.

Reversing changes from production !

Dear Friends,
I have done a successful transport of java change to production system using CMS.
Can I revert it back?
Can I revert it back to previous of previous?
If possible, how can I do it?
Documents and links prefered.
Thanks in advance,
Regards,
Lakshmikantha

Click on the History button, select time frame of the last correct import. Pickup the "previous" change and add it to the import queue (+ button on the right hand top corner). It will be in your import queue and you can re-import again. You have to make sure you to select all the components in the same build.
-RK

Cannot change external editor to CS5

I installed CS5 and all went well...it was picked up as the external for lightroom and all was well.
However, then I uninstalled CS4 and now elements(which I also have) is set as the external editor and I cannot change it.
I use windows 7, lightroom 2.5 64bit.
Can anyone help?
Thanks

I had a similar and some related complications.
I have just just re-installed CS5 again following Ian's advice and the Lightroom external editor preference is now correct again.
As it's possibly of interest to others I would like to mention some possible complications as they affected me:
I had CS4 64 bit (part of Design Standard) on W7 64 bit and also LR2.7 64 bit
I purchased CS5 Design Std and was provided with a serial number on proof of eligibility for the version purchased.
After checking that CS5 worked for me, I deactivated CS4 and uninstalled.
1. All of my image related file associations were removed and required manual resetting in Windows separately.
2. Acrobat Pro no longer worked (serial number/activation) although it had been working with the CS4 suite and CS3 before that. I did run the install again with the new disc that comes with CS5 but I assume that it made no changes and was not actually re-installed. After 3 support instances I was given a new serial number and it now worked again.
3. LR2.7 no longer found PS as the default external editor for PSDs although my second manual selection to set Ps .exe as the external editor for TIFF files did still work.
4. I had problems getting ACR and LR edits of DNG files to synchronise.
Some of the complications may be related to the 32 bit and 64 bit versions of Ps. Bridge is still 32 bit as far as I know. LR installs only one version of itself, in my case 64 bit.
I suggest ensuring that you install both 32 and 64 bit versions of Ps and then systematically go through updates and preferences to both as well as LR too.

Frm-40208 from running in query mode. cannot change database fields

Hi,
Could some one help me with this.
I am calling a form from another form. I am passing the parameter list to the calling form and doing a query by setting the block property. But when queries the message
FRM-40208 Form running in query mode. cannot change database fields .
I do not want the message to appear when they go the called form . Please some one could help me how could I avoid displaying the message.
Regards
Bain

Hi,
Good day! I am working with a module that also calls another form. It uses call_form with query mode parameter set to query_only. My problem is, whenever i call the other form using the call_form, it would display the called module and then as it populates the detail block of the called form, it will display frm-40208 from running in query mode. cannot change database fields per record. What I want is for the message to be displayed only once.
I have tried capturing the error by using on-error trigger, but it doesn't go to that whenever the other form was being called. I think the message has to do with the post-query trigger, because it passes some values on a dbase block objects.
Do you have any suggested solutions or workarounds to make the message display only once whenever the other form is being invoked by the call_form?
I would greatly appreciate any suggestions/ideas.
Thanks and regards,
ASantiago

FRM-40208: Form running in query-only mode. Cannot change database fields.

Hi,
I am using forms 6i where it is calling a form from a menu in query like call_form(,query_only). Now an error is occurring on call of that form ‘FRM-40208: Form running in query-only mode. Cannot change database fields.’ Though this is been handled to give a certain message from on_error message from a package from library.
Now the issue is that the error keeps on popping even after the ok button is pressed. There are number of records from the table. How can we handle the error. Any suggestion would be really appreciated!!!
Regards,
Rajesh

thanks Gred but i have resolved the issue. it seems that each row was going into query_only mode (program written such a way). therefore the error was showing even after the OK button. handled the issue from ON_ERROR trigger. anyway thanks for your time Gred!

Cannot change to Production mode using WLST

Similar Messages

Maybe you are looking for