Cannot connect to WiSM module
Hi Guys
I am having an issue with a WiSm module running 4.1.185, where connectivity to the blade is very intermitent, it connects for about 10 minutes and then dies, the only way we get it back is by cold starting the module by pulling it out of the chassis and then back in again, we have to do this up to three times to establish a connection.
Even though I cant ping or telnet to the controller I can still session onto to it.
anyone seen this before, does it sound like a faulty card or a network issue
What does the show wism status show on the chassis?
Similar Messages
-
I have a Windows 2012 Server set up offering print services to our network, there are about 20 printers set up all deployed via group policy. Recently, on one of our Windows 7 machines I am finding that I an unable to connect to one of the printers shared
on the print server while other clients seem to be able to connect to the same printer with no problem. Also, the printer used to work just fine from this same Windows 7 machine.
To test things further I logged onto the Win7 machine as the domain administrator, connected to the print server and double clicked on the printer to attempt to install it manually (rather than letting Group Policy do it). When I do so I receive the following
message, "Windows cannot connect to the printer. Operation failed with error 0x00004005.
I have done some searching but the only references I am finding to this particular error message involved users attempting to connect to a printer hosted on a 32-bit version of Windows from a 64-bit client. However, in my case both the server and client
are 64-bit.
Can any one help me troubleshoot this 0x00004005 error?
Thank you.Sorry for the delay. I just went and attempted to add the printer again on the client machine, the installation failed just as before, no log entries were recorded in the PrintService Admin log and the Operational log was disabled, I enabled it and added
the printer again. This time when the installation failed seven log entries appeared in the Operational log, all of them informational, no errors or warnings, the events are as follows...
1. Event 300, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was created. No user action is required.
2. Event 304, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was resumed. No user action is required.
3. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
4. Event 306, Settings for printer {71688D29-F70C-42F2-90E1-DA5D450E772D} were changed. No user action is required.
5. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} will be deleted. No user action is required.
6. Event 302, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D},8 will be deleted. No user action is required.
7. Event 301, Printer {71688D29-F70C-42F2-90E1-DA5D450E772D} was deleted, and users will no longer be able to print to this printer. No user action is required.
There are a couple log entries in the Admin log indicating an error occurred, those errors occurred yesterday afternoon at 4:30pm or so. I did not try to add the printer then so I don't know if these are related to this particular problem or not. This same
entry appeared twice at exactly the same time...
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\PrintConfig.dll, error code 0xc1. See the event user data for context information.
As a temporary workaround I installed the drivers for that printer directly on the Windows 7 client machine and that works fine, however this is less than ideal because I had set up group policy to only install that printer for specific users, not for everyone. -
I have 2 controller in the same WISM module and I'm trying to make one of them Anchor controller for guest WLAN, but when I give put the anchor controller in a separated non-routed VLAN and connect it to an outside switch by creating VLAN 192 on the core. ( the Internet router is connected to the same switch).-it is showing path down... ( VLAN 192 visitor Internet and VLAN 224 my internal controller management VLAN are not talking)
there is no routing between these 2 VLAN ( because of security), but i can't get the controller to communicate.
-if I connect my laptop to this switch I'm able to go out on Internet but my visitor WLAN is not able to get IP address from the router connected to this switch.
- I called Cisco and one the guys told me that i can leave the management in VLAN 224 for the controller to communicate ( which they did), but the issue I'm having right now is that my visitors are not getting IP addresses from this VLAN at all
some one please advise
vlan192 4/1 vlan 192 int g0/0 192.168.2.201
6500 ----- switch ---- router--------- (outside)
| | |
| DHCP server
WLCA couple of questions, is VLAN 192 allowed across the trunk link to the wlc? Do you have an interface tagged for vlan 192, with a valid address? What is providing the DHCP?
Cheers,
Steve
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
Cannot connect to the report server
I try to submit a report using RWCLIENT (see below), but getting the error:
"REP-0178 Cannot connect to the report server 'rep_M2003-056DVM_ora10gas' "
If I use URL, the report runs fine.
Please advise.
Thanks,
Dmitri
C:\OraDev10g\BIN\rwclient userid=user/password@database module=txr1020 batch=yes paramform=no DESTYPE=LOCALFILE desformat=pdf desname="M:\txr1020.pdf" AUTHID=ias_admin/iasadmin1 server=repserWe have Reports 10.1.2.
RWCLIENT (10g iDS) is installed on different machine.
On OracleAS I have started the Naming Service: namingservice.bat 14021
On client I updated the rwnetwork.conf with OracleAS hostname and 14021.
What is wrong? Maybe I need to start Naming Service using OPMN for report server to register.
Thanks. -
CiscoWorks ANI server cannot connect, Joe Clark please help
Joe, if you see this, please help
I noticed yesterday I was getting some Java errors when opening different modules of Cisco Works, Campus Manager, RME.
I rebooted the server and everything seemd to be working fine. I tried to set up Notification Services after the reboot and it seemed to go without incident.
This morning Common Services shows
"DCA Server is down or inaccessable"
Campus Manager shows:
"Cannot connect to ANI Server since it is down"
Here is a clip from ani.log:
2007/12/28 08:00:08 Thread-76 ani ERROR DBConnection$ConnectionCreator: Failed to establish DB connectivity because: java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect
2007/12/28 08:00:08 Discovery ani ERROR DiscoveryTimeBaseStat: Failed to enumerate Wbu table names because null
2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseStat: {NumDevices=31}{NumDiscovered=0}{NumDeleted=0}{DPH=14695}{OPH=0}
2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseImpl: completed: Discovery in 8578 ms
1198846847568 December 28, 2007 8:00:47 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
1198846910568 December 28, 2007 8:01:50 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
1198846973568 December 28, 2007 8:02:53 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
Reboot has not helped this morning.
I just found out we did some WIndows patches a couple of days ago.Joe,
Is there any way this could have been related to me setting up Notification Services?
Something I noticed yesterday is that when setting up "Event Sets", nothing shows up.
Per the document (and I saw this yesterday after a reboot of the server (most likely what caused the problem), I should see a list of items to trigger notification and I can configure nine different sets.
But, I see "No Records" on the Event Sets page.
I see the A,B,C etc, but nothing under them.
After a reboot yesterday, then I saw the items and checked off for the different event sets.
My goal is to have an e-mail alert when switch or router interfaces go down , or high utilization of fragmentation. -
Cannot connect to the Administration server?
I just installed Hyperion 11.1.2 in Windows 2008, and I'm sure the essbase server is started because I can connect by MaxL, and I can see the Administration server service is started because I can see it in the service list. But When I want to login ADM, error messageL "Cannot connect to the Administration server", please advise?
Error: java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
java.lang.NoClassDefFoundError: com/essbase/eas/utils/Environment
Error detail:
2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [WARNING] [] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] java.library.path=E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin;.;C:\Windows\system32;C:\Windows;E:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\bin;E:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;D:\app\serv_hyperion\product\11.2.0\client_1\bin;D:\app\serv_hyperion\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Intel\DMIX;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Activator\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Viewer\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\lib;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
[2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-00100] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] Unknown error occurred. See below stack trace for details[[
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
Edited by: user2571802 on May 8, 2010 2:01 PM
Edited by: user2571802 on May 8, 2010 6:52 PMI too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
[ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
at HspCreateDatasource.doHandle(Unknown Source)
at HspCreateDatasource.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF -
Cannot connect to hyperion financial reporting in EPM 11.1.2.1
Dear all,
I cannot connect to FR in EPM 11.1.2.1 on test server , and this problem avoid us from migrating to production .
I successfully conigured FR and install it on our system . But we still facing the same problem . We already followed some steps published in OTN .
*1- Reconfigured FR and redeploy and reconfigure web server. but nothing changed*
*2- Create new user and provision him to all roles then refresh the security filters but nothing changed*
The test server is 2008 Win OS , 64 bit.
EPM version is 11.1.2.1 .
we received the following 2 errors .
*1- in FR : "You are not authorized to use this functionality. Contact your administrator."*
*2-In workspace : "Required application module reporting.HRImport is not configured"*
Kindly, support.For the below issues, we had the same issues earlier....
we received the following 2 errors .
1- in FR : "You are not authorized to use this functionality. Contact your administrator."
2-In workspace : "Required application module reporting.HRImport is not configured"
First error will come in different situations....
->If FR studio/BI installed in different server, you are trying to connect from other machine, it will give the error.
For this you need to contact firewall/windows team to open the required ports to be open (ex: 19000/8297,etc), we have asked firewall team to open all hyperion ports from main server to source & vice versa, then it worked.
Note: If BI/FR installed unix, you are trying to access from windows, you need to get all ports to be opened vise versa. please make you are in the same network. try to ping telnet ports from source to destination for each port and vice versa.
->Also the same (1st error) will come if BI services down & not able to ping the FR installed server/work space services. and make sure your admin id should have all admin privilizes.
Second error:
-> Whenever workspace/FR studio services are not up, then will get the error, try to restart directly from /bin folder or try to check the status once you restart (sometimes due to closewait/hung connections), will face issue.
Actuall the same error will come even in 9.3.1 version.
Note: I am just sharing my environment issues and fixes, faced same issues & error and get it resolved with help of windows team. apologize if i am wrong in your envrionment & issue. -
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
i have two switches 6509 connected by vss technology
i add two wism module ( one in each switch 6509 )
i need to know if two wism are operate active - active in vss or active - standby ?Hi Mohammad,
Redundancy for the APs is achieved by configuring primary, secondary and tertiary controllers.
There is no redundancy between controllers in a way that one controller is in standby mode and keeps verifying whether another active controller is operational.
In your case, you could for example consider the following options:
N + N redundancy:
150 APs with primary controller A and secondary controller D for example.
150 APs with primary controller C and secondary controller B for example.
This will allow an easier redundancy configuration.
(pseudo) N + 1 redundancy:
100 APs with primary controller A; 50 of them with secondary controller C and other 50 with secondary controller D.
100 APs with primary controller B and secondary controller D.
100 APs with primary controller C; 50 of them with secondary controller A and other 50 with secondary controller B.
This is a bit trickier, but it would allow less load per controller and still a fairly robust redundancy in case one of the two Cat6k's goes down.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
AIA Installation: "Cannot Connect to Server"
Hi guys!
I have a problem with installing the Oracle Fusion Middleware 11g AIA Foundartion Pack (11.1.1.4.0). When I get to step 4 of 12, it just gets stuck. It says that it cannot connect to the server.
According to my understanding this is caused by the installation process not being able to communicate with the admin server of the specified domain, or the installation not being able to communicate with the node manager, that has to find the managed server.
My node manager is working fine as I can be able to start the managed server using nmStart('soa_server1') via the wlst shell, or by going to the Weblogic admin console and starting the managed server from there.
There are a couple of threads about this issue around a couple of forums. I haven't found any concrete solution though. I have tried everything that the forums were suggesting, and nothing works.
You assistance will be of value.
Regards,
O..Part [3]:
[2011-02-17T11:28:04.992+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SOA_USER_NAME) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.992+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SOA_DOMAIN_NAME) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.992+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(PORT_NUMBER) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.992+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:04.992+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(ADMIN_PASSWORD_ENCRYPT) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(MANAGED_SERVER_PORT) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(MANAGED_SERVER) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(HOST_NAME) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(DOMAIN_ROOT) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(REMOTE_INSTALL) to:false. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SOA_JDEV_HOME) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(CLUSTER_CHECK) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.993+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(CLUSTER_PROXY_HOST) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.994+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(CLUSTER_PROXY_PORT) to:unknown. Value obtained from:USER
[2011-02-17T11:28:04.997+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Finished parsing: /oracle/as/install/soawl/config/SOADetails.xml
[2011-02-17T11:28:04.997+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] INFOBegin parsing: /oracle/as/install/soawl/config/SoaValidationPage.xml
[2011-02-17T11:28:04.999+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(REMOTEJDBC_FIELD) to:Validating other server settings. Value obtained from:USER
[2011-02-17T11:28:04.999+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(MODECHECK_FIELD) to:Verifying if Server is in Production Mode. Value obtained from:USER
[2011-02-17T11:28:04.999+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(EDIT_LOC_FIELD) to:Verifying locks for configuration editing. Value obtained from:USER
[2011-02-17T11:28:04.999+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(USERMEM_FIELD) to:Validating server memory settings. Value obtained from:USER
[2011-02-17T11:28:05.000+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RETRY_FIELD) to:Retry. Value obtained from:USER
[2011-02-17T11:28:05.000+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SKIP_FIELD) to:Skip. Value obtained from:USER
[2011-02-17T11:28:05.000+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(MODE_ERROR) to:Please Ensure that the server is in Development to proceed with AIA FP install. Value obtained from:USER
[2011-02-17T11:28:05.000+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(REMOTEJDBC_ERROR) to:Please Ensure that the Remote JDBC parameter is set \n in the SetDomainEnv.sh/cmd file.\n. Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(EDIT_LOC_ERROR) to:The Edit Lock is currently not available. Please ensure that all edit sessions are either activated or undone from the weblogic console.. Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATE_REMOETJDBC_FIELD) to:Validating Remote JDBC Enabled..... Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATE_LOC_FIELD) to:Validating Edit Lock..... Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATE_MEM_FIELD) to:Validating USER_MEM_ARGS..... Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATE_MODE_FIELD) to:Validating Domain Mode..... Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATION_COMPLETE_FIELD) to:Validation Complete . Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SYSTEM_ERROR) to:Unable to fetch the system details to validate. Ensure that the admin server is up and running. Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(DETAIL_TEXT) to:This might take some time. \n Press Skip if you wish to proceed without validating your SOA Details.. Value obtained from:USER
[2011-02-17T11:28:05.001+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(VALIDATION_CANCELLED) to:Validation Cancelled . Value obtained from:USER
[2011-02-17T11:28:05.002+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Finished parsing: /oracle/as/install/soawl/config/SoaValidationPage.xml
[2011-02-17T11:28:05.002+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] INFOBegin parsing: /oracle/as/install/soawl/config/SysAndMdsDetailsPage.xml
[2011-02-17T11:28:05.011+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_URL) to:. Value obtained from:USER
[2011-02-17T11:28:05.011+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_ADMIN_USERNAME) to:. Value obtained from:USER
[2011-02-17T11:28:05.011+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_ADMIN_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.011+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_ADMIN_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.011+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_SYS_USER) to:. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_SYS_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_SYS_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_DTSPACE) to:SYSTEM. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_TTSPACE) to:TEMP. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_SYS_ROLE) to:. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_SYS_CREATE) to:true. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_PORT) to:. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_CONFIRM_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_CONFIRM_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.012+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_ISRAC) to:false. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_PORT) to:. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_URL) to:. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_ADMIN_USERNAME) to:. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_ADMIN_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_ADMIN_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_SYS_USER) to:. Value obtained from:USER
[2011-02-17T11:28:05.013+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_SYS_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_SYS_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_DTSPACE) to:SYSTEM. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_TTSPACE) to:TEMP. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_SYS_ROLE) to:. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_SYS_CREATE) to:true. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_CONFIRM_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_CONFIRM_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_ISRAC) to:false. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_PORT) to:. Value obtained from:USER
[2011-02-17T11:28:05.014+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_URL) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_ADMIN_USERNAME) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_ADMIN_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_ADMIN_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_SYS_USER) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_SYS_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_SYS_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_DTSPACE) to:SYSTEM. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_TTSPACE) to:TEMP. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_SYS_ROLE) to:. Value obtained from:USER
[2011-02-17T11:28:05.015+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_SYS_CREATE) to:true. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_CONFIRM_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_CONFIRM_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_ISRAC) to:false. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_PORT) to:. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_URL) to:. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_ADMIN_USERNAME) to:. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_ADMIN_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.016+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_ADMIN_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_SYS_USER) to:. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_SYS_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_SYS_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_DTSPACE) to:SYSTEM. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_TTSPACE) to:TEMP. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_SYS_ROLE) to:. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_SYS_CREATE) to:true. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_CONFIRM_PASS) to:<SECURE>. Value obtained from:USER
[2011-02-17T11:28:05.017+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_CONFIRM_PASS_ENCRYPT) to:. Value obtained from:USER
[2011-02-17T11:28:05.018+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_ISRAC) to:false. Value obtained from:USER
[2011-02-17T11:28:05.023+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Finished parsing: /oracle/as/install/soawl/config/SysAndMdsDetailsPage.xml
[2011-02-17T11:28:05.024+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.input] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] INFOBegin parsing: /oracle/as/install/soawl/config/RACdbPage.xml
[2011-02-17T11:28:05.024+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_HOST_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.024+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_PORT_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.024+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_INSTANCE_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.024+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_ADD_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_REMOVE_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_SERVICE_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_VALIDATE_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_ERROR_FIELD1) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_ERROR_FIELD2) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(RAC_SUCCESS_FIELD) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_SERVICE) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_RACINSTANCE) to:. Value obtained from:USER
[2011-02-17T11:28:05.025+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_INSTANCES) to:. Value obtained from:USER
[2011-02-17T11:28:05.026+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_HOSTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.026+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_PORTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.026+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIADB_RAC_RACURL) to:. Value obtained from:USER
[2011-02-17T11:28:05.026+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_SERVICE) to:. Value obtained from:USER
[2011-02-17T11:28:05.026+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_RACINSTANCE) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_INSTANCES) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_HOSTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_PORTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(AIALC_RAC_RACURL) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_SERVICE) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_RACINSTANCE) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_INSTANCES) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_HOSTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_PORTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.027+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(JMSDB_RAC_RACURL) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_SERVICE) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_RACINSTANCE) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_INSTANCES) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_HOSTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_PORTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(XREF_RAC_RACURL) to:. Value obtained from:USER
[2011-02-17T11:28:05.028+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_SERVICE) to:. Value obtained from:USER
[2011-02-17T11:28:05.029+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_RACINSTANCE) to:. Value obtained from:USER
[2011-02-17T11:28:05.030+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_INSTANCES) to:. Value obtained from:USER
[2011-02-17T11:28:05.030+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_HOSTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.030+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_PORTS) to:. Value obtained from:USER
[2011-02-17T11:28:05.030+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000IsmwdqaFw000jzwkno1DNEc^000000,0] Setting valueOf(SRDB_RAC_RACURL) to:. Value obtained from:USER -
Cannot connect to via wifi after some upgrade...
After updating some package recently, I cannot connect to wifi. Normally, I'd use netcfg (now v2.8.2) to connect thus:
┌─(dan@archbang)────────────(22:35)───┐
└─(~)─> sudo netcfg -u dd-wrt_vap
:: dd-wrt_vap up [BUSY] DEBUG: status reported to profile_up as:
DEBUG: wireless_up stop_wpa wlan0
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
ctrl_iface exists and seems to be in use - cannot override it
Delete '/run/wpa_supplicant/wlan0' manually if it is not used anymore
Failed to initialize control interface '/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.
> wpa_supplicant did not start, possible configuration error
DEBUG: profile_up connect failed
[FAIL]
┌─(dan@archbang)────────────(22:36)───┐
└─(~)─> sudo rm /run/wpa_supplicant/wlan0
┌─(dan@archbang)────────────(22:36)───┐
└─(~)─> sudo netcfg -u dd-wrt_vap
:: dd-wrt_vap up [BUSY] DEBUG: status reported to profile_up as:
DEBUG: wireless_up stop_wpa wlan0
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
DEBUG: wireless_up scanning
DEBUG: wpa_cli -p /run/wpa_supplicant -i wlan0 scan
DEBUG: wpa_find_essid "dd-wrt_vap"
DEBUG: wireless_up stop_wpa wlan0
DEBUG: wireless_up Configuration generated at /run/network/wpa.wlan0/wpa.conf
DEBUG: wireless_up ifup
DEBUG: wireless_up start_wpa wlan0 /run/network/wpa.wlan0/wpa.conf nl80211,wext
DEBUG: wireless_up wpa_check
DEBUG: wpa_cli -p /run/wpa_supplicant -i wlan0 status
> WPA Authentication/Association Failed
DEBUG: profile_up connect failed
As you can see, I run into several errors and cannot connect. This is the profile for the wireless connection:
NETCFG_DEBUG=1
CONNECTION="wireless"
ESSID="dd-wrt_vap"
INTERFACE="wlan0"
DESCRIPTION="Automatically generated profile"
SCAN="yes"
IP="dhcp"
TIMEOUT="10"
SECURITY="wep"
KEY="37d103dcb9"
Here's my lsmod output:
lsmod
Module Size Used by
fuse 59284 2
uvcvideo 60797 0
videobuf2_vmalloc 1736 1 uvcvideo
videobuf2_memops 1562 1 videobuf2_vmalloc
videobuf2_core 18103 1 uvcvideo
videodev 72205 1 uvcvideo
media 8513 2 videodev,uvcvideo
joydev 7663 0
arc4 1118 2
snd_hda_codec_conexant 39484 1
radeon 718200 3
snd_hda_codec_hdmi 21760 1
i2c_algo_bit 4583 1 radeon
drm_kms_helper 23303 1 radeon
ttm 46603 1 radeon
snd_hda_intel 20080 7
evdev 7310 18
snd_hda_codec 79405 3 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_conexant
powernow_k8 11980 0
serio_raw 3709 0
psmouse 69902 0
mperf 1027 1 powernow_k8
drm 166772 5 ttm,drm_kms_helper,radeon
k10temp 2171 0
snd_pcm 60499 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
snd_hwdep 4970 1 snd_hda_codec
agpgart 22159 2 drm,ttm
r8169 41768 0
i2c_piix4 7148 0
thinkpad_acpi 54705 0
snd_timer 15158 1 snd_pcm
i2c_core 16845 6 i2c_piix4,drm,drm_kms_helper,i2c_algo_bit,radeon,videodev
mii 3439 1 r8169
thermal 6563 0
battery 5053 0
nvram 4794 1 thinkpad_acpi
snd 45013 21 snd_timer,thinkpad_acpi,snd_hwdep,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_conexant
soundcore 4986 1 snd
rtl8192ce 67707 0
video 9819 0
rtlwifi 84762 1 rtl8192ce
rtl8192c_common 53859 1 rtl8192ce
ac 1796 0
button 3614 0
processor 23444 2 powernow_k8
mac80211 336947 3 rtl8192c_common,rtlwifi,rtl8192ce
cfg80211 153196 2 mac80211,rtlwifi
rfkill 12600 2 cfg80211,thinkpad_acpi
ext4 384604 1
jbd2 60590 1 ext4
mbcache 4345 1 ext4
crc16 1091 1 ext4
sd_mod 25867 2
ahci 17689 1
ohci_hcd 19088 0
ehci_hcd 38608 0
libahci 16783 1 ahci
libata 145743 2 libahci,ahci
scsi_mod 112765 2 libata,sd_mod
usbcore 122751 5 ehci_hcd,ohci_hcd,rtlwifi,uvcvideo
usb_common 622 1 usbcore
And finally, iwconfig output:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr=2347 B Fragment thr:off
Power Management:off
Any pointers would be much appreciated.Yeah, I was having the same issue with Lion until I tried this
http://support.apple.com/kb/HT1170
Basically, my drive's name was exactly 27 characters. I made it shorter and it seems to now work without issue under Lion. It is odd that it worked fine under SL, but this seems to fix the issue. -
Cannot connect to the database. java.sql.SQLException:
Hi,
I am trying to connect to Pointbase database through an applcation written under J2EE environment. I am able to connect with other database under Pointbase. I am trying to connect using the code as follows:
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("Jdbc:Odbc:study", dbUserID, dbPassword);
and I am getting the Exception as shown delow :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: access denied (java.lang.RuntimePermission exitVM)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:372)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
root cause
java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
java.security.AccessController.checkPermission(AccessController.java:401)
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
java.lang.SecurityManager.checkExit(SecurityManager.java:736)
com.sun.enterprise.J2EESecurityManager.checkExit(J2EESecurityManager.java:70)
java.lang.Runtime.exit(Runtime.java:88)
java.lang.System.exit(System.java:715)
org.apache.jsp.login_jsp._jspService(login_jsp.java:76)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:141)
javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
note The full stack trace of the root cause is available in the Sun-Java-System/Application-Server-PE-8.0 logs.
Sun-Java-System/Application-Server-PE-8.0
Please help.
NNJThanks for the reply. I have attached the server.log herewith :
[#|2008-10-05T11:44:45.945+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1006:Uploading the file to:[C:\Documents and Settings\Administrator\Local Settings\Temp\s1astempdomain1server-1629282413\server\study.war]|#]
[#|2008-10-05T11:44:45.955+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1007:Uploaded the remote file at: [C:\Documents and Settings\Administrator\Local Settings\Temp\s1astempdomain1server-1629282413\server\study.war]|#]
[#|2008-10-05T11:44:46.225+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- undeploy web/study]|#]
[#|2008-10-05T11:44:46.686+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-10-05T11:44:47.947+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|DPL5109: EJBC - START of EJBC for [study]|#]
[#|2008-10-05T11:44:47.977+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|Processing beans ...|#]
[#|2008-10-05T11:44:47.987+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|DPL5110: EJBC - END of EJBC for [study]|#]
[#|2008-10-05T11:44:48.158+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|Total Deployment Time: 2043 msec, Total EJB Compiler Module Time: 40 msec, Portion spent EJB Compiling: 1%
Breakdown of EJBC Module Time: Total Time for EJBC: 40 msec, CMP Generation: 0 msec (0%), Java Compilation: 0 msec (0%), RMI Compilation: 0 msec (0%), JAX-RPC Generation: 0 msec (0%),
|#]
[#|2008-10-05T11:44:48.278+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.deployment|_ThreadID=12;|deployed with moduleid = study|#]
[#|2008-10-05T11:44:48.378+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1041:Sent the event to instance:[ModuleDeployEvent -- deploy web/study]|#]
[#|2008-10-05T11:44:48.488+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=12;|WEB0100: Loading web module [study] in virtual server [server] at [study]|#]
[#|2008-10-05T11:44:51.202+0530|INFO|sun-appserver-pe8.0|javax.enterprise.system.tools.admin|_ThreadID=12;|ADM1042:Status of dynamic reconfiguration event processing:[success]|#]
[#|2008-10-05T11:46:06.771+0530|WARNING|sun-appserver-pe8.0|javax.enterprise.system.stream.err|_ThreadID=16;|Cannot connect to the database. java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified|#]
[#|2008-10-05T11:46:06.871+0530|SEVERE|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=16;|StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
java.security.AccessControlException: access denied (java.lang.RuntimePermission exitVM)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
at java.security.AccessController.checkPermission(AccessController.java:401)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at java.lang.SecurityManager.checkExit(SecurityManager.java:736)
at com.sun.enterprise.J2EESecurityManager.checkExit(J2EESecurityManager.java:70)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:715)
at org.apache.jsp.login_jsp._jspService(login_jsp.java:76)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:141)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534)
|#]
regards,
NNJ -
i have two core 6509E with version 12.2(33)SXI connected by VSS
i install two wism module , one in each core .
i need best two wism design and configuration in this case.
please advice me .Hi Mohammad,
First, VSS redundancy it's completly independent for WiSM redundancy.
What you can do it's configure both WiSM at same mobility group, so you have a cluster with two controllers. With all APs registered on it, you can share half of your APs at WiSM-A and the other half at WiSM-B, because Primary, Secondary and Terciary controller settings are AP independent, So you have redundancy for you LWAPP wireless network.
Now, for VSS, you have your L2 and L3 unified at 6500 series switch. This config it's independent of anything, and you'll have to know how you wanna have the L3 of your network, making the virtual interfaces across VSS system.
You can take a look at this document, just to understand it: http://www.cisco.com/en/US/partner/products/hw/modules/ps2706/products_tech_note09186a0080a6c202.shtml
Best regards,
Please rate helpful replies.
Alexsandro. -
Fatal error 78: Cannot connect to User Group LDAP Server
After configuring Calendar server when trying to start:
give following error:
# ./start-cal
Restarting calendar services
Stopping all calendar services
Starting all calendar services
# enpd is started
csnotifyd is started
csadmind is started
Fatal error 78: Cannot connect to User Group LDAP Server
cshttpd is not started
Calendar service(s) not started
cshttpd is not started
Calendar service(s) not started
Following logs are from http logs of calendar server
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Information: Log created (1095109367)
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: Sun Java System Calendar Server 6 2004Q2 (built Apr 28 2004) cshttpd starting up
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd attempting to open Counters Database
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd successfully opened the Counters Database
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module has refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd: argc=3 argv[0]=/opt/SUNWics5/cal/lib/cshttpd
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: attempting to open session database for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: session database open completed for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: Store Critical: Error checking session database: DB->set_alloc: method not permitted in shared environment
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: LdapCacheInit: Ldap Cache not enabled.
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd_parse_commandline: successfully bind process 17916 to processor 0
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Critical: Fatal error 78: Cannot connect to User Group LDAP Server
Have any body seen this before.
RegardsThe server was running fine for few months until i restarted the calendar server. i started to see the same error and the problem was the machine name got changed at some point.
I added the old hostname to the /etc/hosts file and restarted the calender server and it started to work fine. -
Logon balancing error:cannot connect to message server (rc=9)
Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
VikramCheck OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
Error: service 'sap...' unknown
Component NI (network interface), ...
rc = -3, module ninti.c, line 463
Detail NiPGetServByName: service 'sap...' not found
System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
%SystemRoot%\system32\drivers\etc
is not translated to
c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.
Maybe you are looking for
-
Symbolic link error when exporting during heterogeneous system copy
My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment. I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem wit
-
BPM 11g Worklist Replace User Selector
Does anyone know of a way to use the BPM 11g Worklist Application but replace the User/Group selector for the assignment actions? We are looking for more of a tree type selector based on Organizations/Roles rather than a flat search. Thoughts?
-
New Satellite C50-A264 Laptop way too slow.
I got this Satellite C50-A254 few weeks ago,i didnt touch it alot. I only used this laptop 2-3 times but its just terribly slow. Even if i launched Google Chrome,it constantly stopps responding and i have no idea why because it was too slow from the
-
Hope somebody can help :X I've been working on a UI Automation and Testing framework for my AIR apps. I have an AIR application (TestRunner) which loads up another air application as a child component and manipulates properties, fires events at it, e
-
I simply have suggestions: I think u should be able to store whatever u have on any devices to iCloud. For example: it shouldnt matter where I have my songs from, we long as they are on my devices I should be able to save them on iCloud. In this case