Cannot create File at the specified path

I've been trying to create a file but I don't know why Java do not create it.
I don't get any exceptions so I really don't know where the problem is.
Here is my code where I triy to create the file:
System.out.println(MainMailer.class.getResource("").getPath().substring(1)+"Data/account.data");
            File file = new File(""+MainMailer.class.getResource("").getPath().substring(1)+"Data/account.data");Thnaks in advance,
Juan

>>
System.out.println(MainMailer.class.getResource("")
I don't know what you're expecting that to return.
I'd expect that it might return the URL to the FIRST
path in your classpath, which I wouldn't rely on to
be where your MainMailer class lives. You should not
be coding like this. Let there be a system property
or configuration file (which you read from the
classpath) which tells you where to store the files.
Don't try to magically determine the path of where
your MainMailer class lives. For another reason,
MainMailer may live in a JAR/WAR/EAR file, so there
is no "file path" to it. Bad design.I use this line like some sort of flag so I can see the path that I'm using. In fact, that path is the correct one, is where I want to create my file.

Similar Messages

  • I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

    I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
    Alex

    Jim
    Thank you for your prompt reply. Unfortunately I am not that tech oriented and
    cannot easily find that folder. I did notice when I was booting up the LR software
    that I could accept the site where LR usually is set up or choose a place. I am
    thinking that the standard location for LR software is corrupted and that if I
    chose a different place it would work. I say this because whether I use my
    original disc or download from adobe I get the same warning. I have 100GB of
    memory on the hard drive and I have cleaned the computer with Mcaffee and free
    software. What should I do next? I can't use this software and I doubt LR 5
    would open up with my current problem.
    Alex

  • I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location.

    I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE   TI/-Tmp-”
    I've also been getting others errors about cannot create or modify temporary files when trying to install other programs.  Also some of my documents on my computer will not open and crash. 
    Any help would be helpful.
    I've tried doing this as read not sure if it helps:
    ls -Odel $TMPD
    This is what I had in response:
    drwxr-xr-x  36 root  admin  - 1224 Dec  9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/

    Which os version are you using? 
    What is Lighthouse? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • Cannot create or replace : The specified extended attribute name was invalid.

    New problem arrived today. Trying to copy a file from 10.6 server with an XP (SP3) client. I get this error:
    Cannot create or replace (file name here): The specified extended attribute name was invalid.
    The contents of the file can be copied, but not the folder. Other files can be copied. There are no funny characters. The name is not too long. I propogated the permissions on the share and that had no affect. The problem exists on three different XP systems. Can't find extended properties that could be causeing a problem. Any ideas?

    Nikon just released a Firmware update today for the D750

  • Lightroom cannot create files in the temporary file location

    I changed some collection setting and can not open LR3 any more. Help!

    Which os version are you using? 
    What is Lighthouse? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • LV 8.2.1 reinstallation error 1301: Cannot create file

    Hi,
    I was forced to uninstall LV 8.2.1 and reinstall it. When I'm reinstalling LV 8.2.1 I get an error message
    Error 1301. Cannot create file ". A directory with the same name already exists. Cancel the install and try installing to a different location.
    (Abort, Retry, Ignore).
    This error is somehow related to the fact that after uninstalling LV 8.2.1 LabVIEW 8.2 installation directory still remains with some stuff in the user.lib and other folders. I'm always using OpenG packages and I didn't uninstall them so that may be the reason. I also used DataAct class browser with LabVIEW.
    The problem is that I cannot uninstall my OpenG packages before I can get my LabVIEW installed again as VI Package Manager reposinsible for installing OpenG packages doesn't work without installed version of LabVIEW. And I cannot get my LabVIEW correctly installed because of this error. I can press ignore and the installation procedes but I don't know whet it didn't do because of the error.
    I guess this error is a bug in LV 8.2.1 isntaller so would some of NI application engineers help, please.
    For now I press Ignore.
    Tomi Maila
    Tomi Maila

    You will get this error if the installer is trying to install a file that has the same name as a folder at that location. For example lets say the installer has a file called "sample" that should go in LabVIEW\examples folder. Now lets say there was a folder called "LabVIEW\examples\sample". Windows wont let you copy that "sample" file in the same location that contains a "sample" folder. The failure is not an error in the installer.
    The problem with the 8.2.1 installer is that it is not telling you what file this failure occurred on. It is trying to, but the string is not formatted correctly and it just says "cannot create file ." The actual file name should be where the "." is.
    You can usually tell what file it failed on from the text above the progress bar where it says what file is being copied. The best way to see what failed was to get an installation log file.
    Naren Salem
    LabVIEW R&D

  • ACR Raw images wont copy to Jpeg or Tiff; as it fails with "Cannot Create File"

    Requesting immediate help if anyone available currently
    I've been using Photoshop CS6 for several years, never a problem at all. As soon as I bought Creative Cloud, I see many issues that cannot be resolved or are recurring.
    Again today as I go to copy files (images) from Adobe Camera Raw, to say a Tiff or a Jpeg, it appears to begin to copy as normal, then suddenly a box appears with all my copying
    file name/numbers, and it begins to eliminate one by one "Cannot Create File", failing the entire process to copy. I have never seen this until I began using Creative Cloud about a
    month ago.
    Can anyone help this Saturday evening as i am trying to complete a large project of images for others who expect them soon.?
    Thank you and I look forward to any advice soon,
    Mark Seibold, Artist-Astronomer, Portland Oregon

    Hi Rick
    Thanks for clarifying that. Yes, that term was my mistake, as I meant to write 'Save As"
    Another forum respondent just replied also, and he states as so many others do, that they do not use
    the Adobe Camera Raw app formerly with CS6, as they instead use Lightroom, so he apologized that he
    was not familiar with ACR but that I might have an old CS6 plug-in running that may not be completely
    compatible with the new Creative Cloud. I am not sure if this is the problem.
    What I would find as not really likely, is that the Creative Cloud engineers would go through all the trouble
    to redesign from the old CS6, then even assist us over the phone to help install it, but in oversight,
    leave us without a proper update to properly run Adobe Camera Raw. I also have never really understood the advantage of Lightroom. I'm sure that many must enjoy its efficiency, as I hear wedding photographers like it for huge batch processing of adjusting many images in synchronicity all at once. I would say that I do the same with ACR accessing it through Bridge, and I like ACR's quick and simple access for simple image adjustments and then say a small batch all synchronized, then finally to "Save As" for all selected to a final output as Tiff or Jpeg.
    As an astronomer that has just started learning to use Registax for night sky images, we also like the ACR adjustments and then to "Save As" eg. all Jpeg or all Tiff, to then photo-stitch large landscape and night sky panoramas with Microsoft ICE photo-stitching.
    Sorry for the long description here, but I hope to relate the total idea of what I am doing for the past years. I'll even attach an example >
    Thanks for your possible solution to my problem in "Saving As" in ACR,
    Mark

  • Downloads read-Cannot create file.......is something wrong?

    i have got this message on 3 straight downloads now
    only thing that is different is NOW i connect wirelessly doees that have anything to do with it
    download window opens but 3 in a row now............cannot create file
    thanks

    Perform the procedure in this FAQ.
    (15782)

  • Cannot create temp directory: The system cannot find the path specified

    Hello
    I am getting Cannot create temp directory when deploying to Oracle AS , can any one help ?
    ---- Deployment started. ---- Apr 23, 2007 8:20:29 AM
    Target platform is Oracle Application Server 10g 10.1.3 (WEBQA01).
    Wrote WAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.war
    Wrote EAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.ear
    Operation failed with error:
    Cannot create temp directory: The system cannot find the path specified
    Deployment failed
    Elapsed time for deployment: 8 seconds
    #### Deployment incomplete. #### Apr 23, 2007 8:20:37 AM

    In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
    The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
    Jae

  • HOw to create a text file in the given path and delete it after the use?

    Hi all,
    I am trying to create a text file at the given path and delete the created file after the use.
    I am using following code.:
    import java.io.*;
    // write binary data as characters
    public class RanIO {
                                            public static void main(String f[])
                                                      // First illustrate append
                                                      String lineSep = "\n";
                                                      try {
                                                                     File temp= new File("C:/Ash","cute.txt");
                                                      boolean ch=temp.createNewFile();
                                                      if(ch)
                                                           System.out.println("file created");
                                                      else
                                                      System.out.println("file Not created");
                                                      //writing to file
                                                 /*     PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
                                                      p.print("Emp NO");
                                                      p.close();*/
                                                                // Open fileWriter in append mode
                                                                               FileWriter fos = new FileWriter(temp, true);
                                                                               BufferedWriter bw = new BufferedWriter(fos);
                                                                               PrintWriter pw = new PrintWriter(fos);
                                                                               double d=550;
                                                                          // lineSep = System.getProperty("line.separator");
                                                                          pw.print("Hello");
                                                                          //pw.print( lineSep );
                                                                          pw.print( d );
                                                                          pw.close();
                                  boolean det=temp.delete();
                                                 if(det)
                                                      System.out.println("File deleted");
                                                 else
                                                      System.out.println("File not deleted");
                                                 } catch (IOException ioe)
                                                                System.out.println( "Append IO error:" + ioe );
    My problem:
    1)
    I am not able to write to the file. I want to know, where i am going wrong.
    It is giving error message like
    "Canot resolve Symbol: temp,"
    But, FileWriter Constructor should accept a File type parameter.
    here temp is a file parameter.
    If i am not using file=new file();
    i can't delete the file after the use. i.e if i use
    PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
    how can i delete cute.txt after the use?
    2)
    I am not able to write to the text file. file is created but, a blank file.
    "Hello" is not written into the text file.
    can anyone help me in this regard
    Thanks in advance
    Ashvini

    Thank you Ram,
    But, i want to create a text file in Append mode.
    for that i used
    FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
    this format. if i use
    FileWriter fos = new
    FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
    public FileWriter(File file,
    boolean append)
    throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
    Parameters:
    file - a File object to write to
    append - if true, then bytes will be written to the end of the file rather than the beginning
    Throws:
    IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
    Since:
    1.4
    Are you using jdk.13 or lower ?
    >
    ONe more doubt, Does flush method deletes a file?
    if not, then i need to use
    File temp=new File("c:/ash/cute.txt");
    FileWriter fos = new FileWriter(temp,true); //which
    is again a problem
    if(temp.delete())
    out.println("File is deleted");
    }I don't know whether i am taking it wrong ! or
    anything wrong with my coding ! but, after creating
    and writing data into a text file. I must delete it
    as it contains confidential informations.
    Regards,
    Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
    javadoc again
    PrintWriter
    public PrintWriter(Writer out,
    boolean autoFlush)Create a new PrintWriter.
    Parameters:
    out - A character-output stream
    autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
    cheers,
    ram.
    Question; What do you gain by opening a file, writing to it and deleting it in the same program ?

  • SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi,
    I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
    <Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
    to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
    I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
    "The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
    I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
    renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
    Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
    error logging. So we created another project in Visual Studio called:
    <Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
    And this is when the error has come back and bitten me! The scenario is now as follows:
    1. project1 packages and deploys successfully with long feature names and deep paths.
    2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
    I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
    1. By doing the following I can get project2 to package
    In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
    Clean the solution
    Shut down Visual Studio 2010
    Open Visual Studio 2010
    Rebuild the solution
    Package the project2
    et voila the package is generated!
    This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
    no longer be hanging onto something.
    Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
    solutions on a Build Server using automated builds.
    2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
    3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
    does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
    4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
    from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
    5. DebugView shows nothing useful during the build and packaging of the project.
    6. The error seems to occur in
    CreateSharePointProjectService target called at line 365 of
    Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
    project2 completely and recreate it and introduce it into my Visual Studio solution.
    Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
    Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
    project etc... and is actually workable in a meaningful Visual Studio solution.

    Hi
    Yes, I thought I had fixed this my moving my solution from the usual documents  to
    c:\v2010\projectsOverflow\DetailedProjectTimeline
    This builds ok, but when I come to package I get the lovely error:
    Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
    Now, the error seems to be related to 
    Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
    <metaData>
    <type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
    <importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
    </metaData>
    <data>
    <properties>
    <property name="Title" type="string">VisualProjectTimelineWebPart</property>
    <property name="Description" type="string">My Visual WebPart</property>
    </properties>
    </data>
    </webPart>
    </webParts>
    .... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
    Daniel

  • Powershell Get-childItem: The specified path, file name, or both are too long.

    Hey Scriping Guys!
    I've been using a PowerShell script for a couple of years now to generate a monthly report showing the size of user folders on a number of departmental file servers.  It's working just fine on all file servers except one where the users have gotten carried away with creating sub-folders and using realy long descriptive file names.  The problem piece of script is this:
    $colItems = (Get-ChildItem \\192.168.10.5\marketing -recurse | Measure-Object -property length -sum)
    "marketing-serv\marketing: "+"{0:N2}" -f ($colItems.sum / 1GB) + " GB"
    The reply I get is:
    Get-ChildItem : The specified path, file name, or both are too long. The fully
    qualified file name must be less than 260 characters, and the directory name mu
    st be less than 248 characters.
    At G:\data\Server_space_Report\serverspace2.ps1:37 char:27
    + $colItems = (Get-ChildItem  <<<< \\192.168.10.5\marketing -recurse | Measure-Obje
    ct -property length -sum)
    Yes, the message is correct, however, when I connect to the server, right click the folder and chose properties it returns a size of 128 GB.  My questions are
    1. Why does clicking on folder properties not produce an error (what is it doing differently from my script)?
    2. How can I fix my script?
    Thanks,

    I am trying to clear up the older open posts on this forum. If this is still an unresolved issue for you please let me know. If you do not post back within one week I will assume it is resolved and will close this thread.
    Thank you
    Ed Wilson
    Microsoft Scripting Guy

  • Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

    Hi, Im trying to get the whole path in my server, so i tried that with this following code
    Get-ChildItem $sourceFolder  -Recurse | ?{$_.PsIsContainer} |Get-Acl
    But then, it showed me somtehing like this :
    Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
     I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
    but all of the trick just dont work
    is there any way to solve this problem? thanks

    There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
    If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
    If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
    will be relative to that psdrive and not to what is specified as the $sourcefolder.
    unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
    output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
    Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

    I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
    longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
    Other Errors and Warnings
    1 error(s), 1 warning(s)
    Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
    Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
    at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
    at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
    Inner Exception Details:
    Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
    Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
    Thanks,
    Altaf B.

    Hi AltafB,
    For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
    http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
    Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot render files.  The following message appears: file error; the specified file is locked

    Suddenly I cannot render any project in Final Cut 6, because a message reads: file error: the specified file is locked.  Any clues on what to do?

    The reason we suggest searching is there are too many possible causes and unlikely answers and FCP6 was a long time ago.
    bogiesan

Maybe you are looking for

  • ALV Total and Subtotal in ALV

    Hi,       I want to display the Total and Subtotal in Alv in Webdynpro Abap, and i am getting this  Error( Access via 'NULL' object reference not possible) and also i have checked the Cardinality also. Please get me a Good Solution.

  • Transaction code J1IH other adjustment accounting entries

    Hi, While doing excise JV tranaction code J1IH other adjustment the system showing below  accounting entries if tick the determine  gl account  Excise duty paid A/c To SEC payable on excise duty To Excise duty payable-ExGrp To ECS payable on excise d

  • I HATE IOS 7!!!! is there anyway to go back to IOS 6?

    Does anyone know if there is a way to go back to IOS 6? TO me it was far superior.

  • How many application servers do I need??

    Does anyone know at what point i would need to consider using two application servers instead of just the one?? Is it based on number of users?? Is it based on hardware spec?? or both Thanks G.

  • Output_link is there any easier (shorter) way??

    Is there any easier (shorter) way to create an simple link as the code below? I am wondering that the code for creating an simple link moved from one line <h:command_hyperlink href="login.jsp" label="Login Page"/> To 4 lines: <h:output_link value="lo