Cannot create Workspace in Oracle 10g 10.2.0.1

I get following error when trying to create new workspace on new or existing schema. HTMLDB is a new installation using the companion cd of Solaris 64bit 10.2.0.1.
ORA-20999: (DBCP) No privilege to alter or create TRIGGER BI_DEMO_USERS in WEBDEV by HTMLDB_PUBLIC_USER. (WEBDEV is an existing schema).
Has anyone faced this problem?

The error seems clear to me. It is trying to find a non-existent file. Did you check what your file names are in the data file and if the related files exist?

Similar Messages

Creating Partitions in Oracle 10G Express Edition

Can I create partitions in oracle 10g express edition?

See yourself :
http://download.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJIJCJ

How to create dblink between oracle 10G and mysql

I want to create dblink between oracle 10G and mysql
I create it in ECC6.0 using DBCO transaction tcode,which database type can choose?Microsoft sql server?Because there have no mysql item.
I choosed MSS so that I can test it, but it failed,there is an error that 'ORA-12569:TNS:packet checksun failure'.
I configured the oracle tnsnames.ora file like this:
     CW.WORLD =
           (DESCRIPTION =
                (ADDRESS_LIST =
                      (ADDRESS =
                              (COMMUNITY = SAP,WORLD)
                              (PROTOCOL = TCP)
                              (HOST = XX.XX.XX.XX)
                              (PORT = XXXX)
               (CONNECT_DATA =
                    (SID = XXX )
               (HS = ok )
When I tnsping CW,it will fail,like this " TNS-12569:TNS:packet checksum failure"
How can I do.

I want to know if this possible?

Create MVs in Oracle 10g DB from Oracle 9i DB using DB link

The tables of an Oracle 10g database is formed mainly (about 90%) from materialized views. These views are created using a database link extracting the data from an existing Oracle 9i database (10g connecting to 9i).
The MVs created from simple queries does not take much time, but whenever a query contains "joins", time freezes and after four hours no results are registered independently of the database volume or number of transactions.
But in case the MVs are created in an Oracle 9i database (9i connecting to 9i), the full creation time varies from four minutes to twenty minutes (about 1,200,000 transactions).
All possible scenarios related to hardware and networking were tested and excluded.
The resolution of this issue is very urgent because it is preventing our institution from upgrading to Oracle 10g.

Why post this one into the OTN Feedback Forum rather than a more appropriate like General Database Discussions ?<br>
<br>
Nicolas.

Not able to create partitions using Oracle 10g express edition

Hello Everyone,
I downloaded Oracle 10g express edition as the documentation for the same says that it supports partitioning of the table.
But when I try to run a command like
CREATE TABLE sales_range
(salesman_id NUMBER(5),
salesman_name VARCHAR2(30),
sales_amount NUMBER(10),
sales_date DATE)
PARTITION BY RANGE(sales_date)
PARTITION sales_jan2000 VALUES LESS THAN(TO_DATE('02/01/2000','DD/MM/YYYY')),
PARTITION sales_feb2000 VALUES LESS THAN(TO_DATE('03/01/2000','DD/MM/YYYY')),
PARTITION sales_mar2000 VALUES LESS THAN(TO_DATE('04/01/2000','DD/MM/YYYY')),
PARTITION sales_apr2000 VALUES LESS THAN(TO_DATE('05/01/2000','DD/MM/YYYY'))
I get the following error
"ORA-00439: feature not enabled: Partitioning"
Please let me know what is causing the issue/error and how to resolve it.
Thanks.

Where did you read that the express edition supports partitioning? I would strongly suspect that there was an error in the documentation-- partitioning is an extra cost option on top of an enterprise edition database. Perhaps you are confusing the personal edition (which does support partitioning) with the express edition?
Justin

Create tablespace in Oracle 10g Express

Hi,
I've been playing around over the last few days with Oracle 10g Express and I need to create my own tablespace and therefore create user associated with my custom table space.
I tried with the command create tablespace, but I am not successful with configuring the parameters such as the datafile location and such. I did go through the Oracle Concepts Guide which was very helpful, but I must be missing something.
Also assuming that my db scheme will be part of my application and therefore released to my client as script so they can re-create my database how would the table space integration work on their end.
I would I have to place my first line of the script to create the table space and ask them for database file location?
Any advice will be appreciated.
Thank you in advance.

user12359577 wrote:
The reason why I think I should create my own tablespace is because I am creating a database scheme and thus I think it is appropriate to place my db scheme in its own tablespace instead of simply using the Users tablespace default.
This is my command:
create tablespace MYTBLSPACE;
Error:
Error starting at line 1 in command:
create tablespace MYTBLSPACE
Error at Command Line:1 Column:32
Error report:
SQL Error: ORA-02199: missing DATAFILE/TEMPFILE clause
02199. 00000 - "missing DATAFILE/TEMPFILE clause"
*Cause: A CREATE TABLESPACE statement has no DATAFILE/TEMPFILE clause.
*Action: Specify a DATAFILE/TEMPFILE clause.
I am also not sure how to specify the datafile.
Thank you.How about checking with the fine SQL Reference manual for the syntax of the CREATE TABLESPACE command?
Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com. Drill down to your product and version.
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
Edited by: EdStevens on Mar 3, 2010 10:13 AM
Edited by: EdStevens on Mar 3, 2010 10:15 AM

How to create database in oracle 10g

hello
i want to create new database
i have already one on my pc. I use oracle 10g express
is there some gui to reach this task ?

Handle:      784633
Status Level:      Newbie
Registered:      Jul 27, 2010
Total Posts:      154
Total Questions:      49 (47 unresolved)
no no ... i need another database - another instanceSince you have all the answers, you are free to proceed as you deem appropriate.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
Ready, Fire, AIM!

How to create spfile in oracle 10g

hi everyone,
i had this problem while i was creating a new database in oracle 10g.when running the database script, it gives an error about invalid option for create temporary tablespace. is it necessary to have an spfile created in 10g. when the script was not working,we tried to create spfile which gives error tht it does not match the parameter db_name. its taking the default db_name=orcl itself..tis not taking our new db name. please help me if u get ne solution reagrding this in steps.
thanz,
laly

See Re: about spfile creating in oracle 10g while creating a new database

Using ORADIM to create instance on Oracle 10g R2, windows platform

Please I used the below command to create database instance to startup at the same time as of the OS is starting up.
ORADIM -new -sid ORCL -SRVC OracleServiceORCL -STARTMODE auto -SRVCSTART system -PFILE C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITORCL.ORA
But When I shutdown the all system at OS level, and restart it, the OracleServiceORCL shows up as Started Automatic in the services tool, but when trying to connect ot the database, the following message appears Connected to an Idle instance So I have to startup manually the database.
It's any thing wrong with my ORADIM command?
Thanks for your cooperation

Thanks,
Maybe I didn't explain exactly what I was expecting with the standby database, these steps are what I did, to resolve the issue
ENABLE THE STANDBY DATABASE TO STARTUP FROM SPFILE
Step 1: create a newly spfile from the current pfile
SQL> CREATE SPFILE='C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SPFILEORCL.ORA' FROM PFILE='C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITORCL.ORA';
Step 2: Rename the INITORCL.ORA TO SAVE_DATE_INITORCL.ORA
Example: the C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITORCL.ORA became
C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SAVE_24072007_INITORCL.ORA
Step 3: delete the former sid created
C:\ORADIM -delete -sid orcl
Instance deleted.
Step 3: Change the Oracle service to start when the OS start
C:\ ORADIM -new -sid ORCL -SRVC OracleServiceORCL -STARTMODE auto -SRVCSTART system -SPFILE
Instance created.
Now When I shutdown the whole system and start it up, the standby database startup. the only thing is that the standby database startup a read-only mode, defautl with oracle 10g this is fine for me, because the MRP is stopped but the log shipping is not stopped.
So eventhough the system admin shutdown the database server at OS level without letting me know, tha standby should continue receiving archived log files.
I'll just need to monitore the lop apply process and start it to apply archived log files received
Thanks

The page cannot be displayed in Oracle 10g

Hi,
I have windows 2003 and I treid Oracle 10g but the problem crop up "the apge cannot be displayed".
what could be the problem?
T. John

Hi T. John,
Please specify the full version of the application server, what is the link that you are trying to access? How are you starting the application server?
Please provide more details.
Thanks,
Deepak

Cannot create connection to Oracle database

Hello all,
I would like to create a winform that connects to an Oracle 10g database. I followed the below steps:
1- Create a Winform project
2- Go to Server Explorer>Data Connection to add a new connection
3-In the "Add Connection" window, change the data source to "Oracle database"
4- Type in the required information (server name, user, password)
5- when testing the connection, i get an error message telling:
ORA-12154: TNS: could not resolve the connect identifier specified
Please to note that I have:
       - 64bit OS, Visual Studio 2012
       - Visual Studio 2012 Version 11.0.61030.00 Update 4
       - Oracle client 10.2.0.4 for MS Windows 64bit
       - ODAC10.2
Any idea about the issue ?
Best regards,
Nassim

Hello,
No solution provided, instead resources. I believe the issue is in the connection string no matter which way you connnect.
As you can see on
this page for creating strong typed datasets there is not much to it and would recommend the following stated below.
The first thing to do is located the error (it is on this page) on
the following page, go through the checklist and see if anything there can help.
Lastly,
Oracle data provider will be removed in a future version of Visual Studio.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Problem faced while creating database in oracle 10g

SQL> get C:\Oracle_Docs\ex\dbcreation_script\DBCREATIONSCRIPT
1 create database db_test
2 logfile group 1 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO01.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO02.rdo') size 100 m,
3 group 2 ('C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO03.rdo','C:\oracle\product\10.1.0\oradata\orcl\testdb\REDO04.rdo') size 100 m
4 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\system01.dbf' size 32m
5 SYSAUX DATAFILE 'C:\oracle\product\10.1.0\oradata\orcl\testdb\SYSAUX.DBF' SIZE 325M
6 undo tablespace testundotbs
7 datafile 'C:\oracle\product\10.1.0\oradata\orcl\testdb\undo01.dbf' size 40 m
8 default temporary tablespace test_temptbls
9 tempfile 'C:\oracledb\testdb\tempo1.dbf' size 40 m
10 character set WE8MSWIN1252
11* national character set AL16UTF16
12 /
create database db_test
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01504: database name 'DB_TEST' does not match parameter db_name 'orcl'
create spfile = 'C:\oracle\product\10.1.0\db_1\database\spfiledb_test.ora' from pfile = 'C:\oracle\product\10.1.0\admin\orcl\pfile\init.ora'
ERROR at line 1:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file
'C:\ORACLE\PRODUCT\10.1.0\ADMIN\ORCL\PFILE\INIT.ORA'
Message was edited by:
user525645

i have the init file which contains my database name.i have tries asking one sir regarding this. he checked out my problem but couldnt get the solution.he told he'll check it out and tell...he 's telling ther is 25% chance in installation problem.
my init.ora file
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=db_test
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.1.0\admin\orcl\bdump
core_dump_dest=C:\oracle\product\10.1.0\admin\orcl\cdump
user_dump_dest=C:\oracle\product\10.1.0\admin\orcl\udump
# File Configuration
control_files=("C:\oracle\product\10.1.0\oradata\orcl\testdb\control01.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control02.ctl", "C:\oracle\product\10.1.0\oradata\orcl\testdb\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=orclXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
Message was edited by:
user525645

Create workspace in Oracle 11g + APEX 2.2 fails

Anybody come across this one?
I have Oracle 11g database installed where I have removed APEX 3.0 and downgraded to APEX 2.2 (due to my clients not having upgraded yet).
I'm using the embedded PL/SQL gateway in the Oracle XML DB HTTP server.
Navigating to APEX login page and logging in as ADMIN is OK but when I want to create a new workspace (based on existing schema) it returns following error:-
ORA-20001: Request 824807541251920 could not be processed. -20001 ORA-20001: Unable to grant initial privs. ORA-20001: Error with: GRANT CREATE JOB TO "IPP" ORA-01031: insufficient privileges
I followed the post-installation steps that came with the installation guide of 11g but they really apply to APEX 3.0. Should I not have done that and instead followed the APEX 2.2 post-installation steps? Those are not clear however on configuring the embedded HTTP server.

SOLVED.
All I needed to do was log in as system and:-
GRANT CREATE JOB TO FLOWS_020200 WITH ADMIN OPTION
Not sure why it was missing though.

Error Creating Database on Oracle 10g Release 2

I'm having a problem creating a second database on 10g release 2 on Windows server 2003.
I have created an initialization parameter file on %Oracle_Home%\database\initDB2.ora
However, whenever I try to run sql command to create a database with the same name as the db_name parameter in the initialization parameter, it gives an error database name 'DB2' does nto matchthe parameter db_name = dbase
dbase is the first database that was created automatically when I installed Oracle.
Any solutions? Why is the server not using the parameter file I have created? Why does it seem to use the initialization parameter file that belongs to the first database?
Cheers

'startup nomount' with 'pfile=...initDB2.ora' clause? In this case Oracle chooses a server parameter file (spfile) by default and I still assume ORACLE_SID is set to your first database. So automatically spfile from the first database is used. You should try:
set ORACLE_SID=DB2
(now in sqlplus) startup nomount pfile=%ORACLE_HOME$\database\initDB2.ora
Werner

Cannot create workspace 10.2.0.1

New installation of 2.2.1 On 10g 10.2.0.1. Package referenced below will not compile and creating a new workspace throws the error below. I've installed bug patch 4554072. An upgrade from 2.0 on another box is running without issue. Any ideas.
Thanks
ORA-04063: PACKAGE BODY "FLOWS_020200.WWV_FLOW_SAMPLE_APP" has errors
ORA-06508: PL/SQL: could NOT find program unit being called: "FLOWS_020200.WWV_FLOW_SAMPLE_APP"

Only messages of consequence in log I've included below. One error and a compilation warning referring to the very package at issue.
create public synonym wwv_flow_file_objects$ for wwv_flow_file_objects$
ERROR at line 1:
ORA-00955: name is already used by an existing object
...wwv_flow_sample_app
Warning: Package Body created with compilation errors.
FAILED CHECK FOR PACKAGE BODY WWV_FLOW_SAMPLE_APP

Cannot create Workspace in Oracle 10g 10.2.0.1

Similar Messages

Maybe you are looking for