Cannot find a J2SE ADK instlled at path

Hi I have installed oracle 11g release 2 (32 bit) on Windows 2007.
As soon as I try to open SQL developer, it ask me for the java path. I have installed Java1.6.0_16 on my machine. So I give E:\javaInstalled\Java\jdk1.6.0_16\bin\java as java path. But even though it is giving me following error.
Cannot find a J2SE ADK instlled at path
E:\javaInstalled\Java\jdk1.6.0_16\bin\java.
Could you please help me resolving this?
Regards

This is a bit surprising as the SQLDeveloper which comes with the database install includes the JDK.
Is the java installation 32 bit or 64 bit? The bittage of the the JDK must match the bittage of SQL Developer.
Try editing <sqldev>\sqldevloper\bin\sqldeveloper.conf and adding
SetJavaHome E:\javaInstalled\Java\jdk1.6.0_16replacing any existing SetJavaHome there.

Similar Messages

Cannot find a J2SE SDK installed at path C:\Program Files\Java\jre6

Hi,
I am trying to install the latest version of SQL Developer 3.0 on my brand new Windows7(64-bit) computer. I already installed the Java SDK6 (Update26). Unfortunatelly I am forcing some problems.
When I start the sqldeveloper.exe for installing - at the beginning when I browse and select the java.exe an error comes up:
Cannot find a J2SE SDK installed at path C:\Program Files\Java\jre6
Why isn't it working?
Can you help me? Any ideas?
Thanks a lot!

That's because you are trying to run SQLDeveloper with a JRE not a JDK.
Since you already installed a JDK you should have a folder labeled
jdk1.6.0_26in your C:\Program Files\Java directory.
If you cant find the proper JDK in your system the 64 bit version for windows can be found here:
http://download.oracle.com/otn-pub/java/jdk/6u26-b03/jdk-6u26-windows-x64.exe

Cannot find a J2SE SDK installed at path...

I posted this in the SQL-Deveolper forum, but perhaps it is better posted here, since it is a Java issue.
I found a thread for this same problem from 2007, but did not find an answer for it.
I'm installing sql-developer on a Windows7 machine 64bit. When I go to run the exe, I get the popup:
"Cannot find a J2SE SDK installed at path: C:\Program Files\Java\jre7."I've downloaded and installed a couple of jdk's to fix this:
jdk-6u37-windows-x64.exe
jdk-7u9-windows-x64.exe
These did not work.
Can anyone tell me what I need to download to get this to work and where I can find it?
Thanks,

I realized we have another wiindows machine that runs sql-developer just fine. I copied the jdk-6u25-windows-x64.exe from that machine and installed on the newer one. The install complained that a new version of java was already installed. But, the older version works where the newer one did not - does not.
So I'm good. But it would be nice to know why the new versions do not include all the foo that seems to make sql-developer work.

Installation error: Cannot find a J2SE SDK installed at path C:\Program Fi

I am installing latest version of SQL Developer, Release 1.2. I have Sun Java 2 Standard Edition Version 1.5.0 (build 1.5.0_10-b03). When I browse and select the java.exe found it comes up with error: Cannot find a J2SE SDK installed at patch
C:\Program Files\Java\jre1.5.0_10
I am installing the version I downloaded for Windows systems with JDK1.5.
I have tried on two different machines.
Any ideas?

This is going to seem loooong, but comprehensive.
I'd initially always suggest using the bundled
package, since that's supposed to be a tested and
proven combination.You know what, I'm gonna be mighty surprised if you're implying that Oracle hasn't 'tested and proven' the releases at http://www.oracle.com./technology/software/products/sql/index.html other than the first 77 MB download labeled Oracle SQL Developer for Windows... :)
After having problems with a graphics card for
example, installing the latest JDK might be
indicated.Huh?!? Not a clue what you're talkin' 'bout! :S
It's also easy for users who don't know which Java
version to download, or even where to find it! You
guys have proven that: although it's stated you need
.First of all, it says right there on the download page (http://www.oracle.com./technology/software/products/sql/index.html) that:
"JDK 1.5 (JDK 5.0) is required. This is the minimum JDK version required"
And we've "proven that [..] although it's stated you need the JDK, [we]'ve tried running with the JRE" and have NOT been able to run the application. It just presents the user a dialog box to locate the 'SDK' manually and exits gracefully if you try to dismiss it. So, conclusively proven, the JDK (or as SQL Developer puts it, Java SDK) is required- QED.
And given users might have several versions running
on the same machine (I have half a dozen), sqldev
could easily pick up a wrong version.And every JRE installation (atleast all of Sun's) make sure they update the default (via PATH and other required system variables) JRE point to the latest one installed. So if you have anything 1.5+ you're good to go; if not, you've got an incompatile JRE. Doesn't sound that hard to me!
As for being bulky, even without the bundled JDK, it
still is.Ya missed the point. Developers are making Java applications bulkier by including the JRE/JDK with their distributions. A SQL Developer release sans JDK is about 46 MB; with JDK that climbs to 77 MB (sizes quoted from download page linked above).
Imagine what happens when you have, besides SQL Developer (JDK 1.5 included), some-cool-java-app that also includes the JRE/JDK it was built on; and then another-java-app that also includes a JRE/JDK... I bet JDeveloper also comes with a JDK bundled in. So, now you have FOUR copies of JRE/JDK (aside from the "have half a dozen" that probably installed themselves via Java Update Checker)!
Here's the big picture, the savings in disk space would only be the beginning of your benefits. Here's a few others:
- Class Data Sharing (http://java.sun.com/javase/6/docs/technotes/guides/vm/class-data-sharing.html) introduced in Java SE 5.0 provides for storing definitions of commonly used classes in a representation closer to machine code, even closer than bytecode, this reducing load and startup time. Plus all VM's launced using that particular distribution get to share the cache- Performace+ !!
Running each app offa' it's own VM just causes multiple caches to be loaded. You just multiplied your losses! :(
- Sun is currently working on a way to have applications simply inject into a running JVM. That way, there is no load and startup time for the JVM, just the time to load you app classes. Using different distros would completely defeat this!
(The reason why this feature isn't out yet is because they're still trying to make it possible to specify hitherto VM configurations like security and logging as application configurations. Then there's also the issue of setting up class loading boundaries between applications.
You say you don't have to bring over the VB runtime
for each app? I remember in the 90's doing it all the
time. Of course, being MS, now that's not necessary
anymore, since it's "magical" Windows. I don't have
any machine from Sun, but for sure they've got Java
bundled with it, right?I don't believe you had to do that since VB 5; and that's because MS realized that they messed up on this very point upto then! Sun worked the simple solution to that into their deployment strategy- install only ONE runtime and run all apps off that. As for you're half-a-dozen, I think you can safely uninstall the five older versions; because, even today, people are running apps developed using JDK1.1 on Java SE 6.0!
Again, I find the most logical difference between JRE
and JDK being the debugger. As you say it yourself:
JRE for end-users, who don't need to do any
debugging.
Now, sqldev is not just a table browser, but also for
debugging PL/SQL. 1 + 1 = 2.I think it's a little naive to differentiate between the JRE and JDK on just the debugger! Aside from the obvious inclusion of a compiler, the JDK has several other tools for monitoring/managing the heap, threads and logging on the fly. There's also the Doclet API and Sun's javadoc implementation, dev interfaces for instrumenting the VM, native interfaces, ...
And I reiterate, we're talkin' PL/SQL developers here. Why would I want to give a PL/SQL developer a Java Development Kit?!? ;|
Nevertheless, as said in the other thread, if the
team discloses how to circumvent the SDK check at
startup, you can go ahead and use the JRE. In any
case, you'd have to agree that won't work as
out-of-the-box solution...You're right, it won't work like a standard Windows OOTB app. But, it WILL work as a Java OOTB that only mandates that there be a JRE available; just like the scores of Java apps out there- from tiny little Pong clones to large IDE's like NetBeans.
BTW, don't even think about quoting Websphere/Rational/Eclipse as counter-arguments. They are the biggest offenders as far as this issue goes. And jikes is an abomination, a curse Sun must carry as a result to opening the VM Spec. But, I digress...

[RESOLVED] Cannot find a J2SE SDK installed at path: C:\java16

I have SQL Developer 3.0.04.34 in C:\apps\sqldeveloper\ and the 32-bit 1.6 JDK in C:\java16\. SQL Developer was working properly until this morning after I updated my JRE (C:\Program Files\Java\jre6\) from 1.5 to 1.6 and JDK (C:\java16\) from 1.6.something to 1.6.26. Now SQL Dev prompts me again for the path to java.exe, but when I specify C:\java16\bin\java.exe, it gives me the error shown in the thread title. The existing sqldeveloper.conf shows "SetJavaHome C:\java16". I found other threads that mention this error, but the problem is typically pointing to the JRE instead of JDK (C:\java16\ is the JDK in my case) or 32-bit vs. 64-bit (this is 32-bit JDK in XP x86). What else might cause the error? I'd rather not reinstall the SQL Developer package that includes the JDK since I already have the JDK elsewhere and it was working before.
EDIT: Never mind. Something must have gone wrong when I was updating the JRE and JDK. I reinstalled the JDK, and now SQL Developer starts.

When i start sqldeveloper.exe (there no exe with a 64 in the name) there ist a dialog that wants to know the path to the JRE.
I tried to chose the directory i placed the Java 7 JDK.
Tried the bin folder in that.
Tried the jre folder and the bin folder in jre.
Everytime i do this ther is the message "cannot find java se sdk installation".
Maybe i am doing it wrong.
What i did:
Downloaded jdk-7u45-windows-x64.exe from oracle.com
Downloaded sqldeveloper-4.0.0.12.84-no-jre.zip from oracle.com
Unzipped sqldeveloper-4.0.0.12.84-no-jre.zip to directory
Opened jdk-7u45-windows-x64.exe with 7zip, there opened tools.zip, unzipped tools.zip to a directory
Started sqldeveloper.exe from software directory and tried to find the JRE... diddn't work
Maybe sqldeveloper.exe ist looking for 32 bit Java?
Update:
Downloaded jdk-7u45-windows-i586.exe from oracle.com
Opened jdk-7u45-windows-i586.exe, there opened tools.zip, unzipped tools.zip to a directory
Started sqldeveloper.exe from software directory and tried to find the JRE... diddn't work
Doesn't look like its working this way.
I would realy be very happy to have the new SQL Developer packaged with JAVA again - thats the sollution i am looking for.
Nachricht geändert durch user2905395 - added update

When SDDM x64 says "Cannot find a J2SE SDK installed at ..." what is it actually looking for?

First of all,please forgive me if this question has been answered before, but search facilities in this new forum are even more rubbish than the old one, which is an achievement I wouldn't have thought possible.
Anyhoo.
I have downloaded the 64-bit version of Data Modeller, which comes without the JRE.
I have installed JDK1.3.0.21. I have subsequently also downloaded and installed JRE 1.7u21. However when I run datamodellerx64.exe for the first time it hurls with this message: "Cannot find a J2SE SDK installed at C:\Program Files\Java\jdk1.7.0_21\bin". It also doesn't like C:\Program Files\Java\jre7\bin (under the JDK install) or .C:\Program Files (x86)\Java\jre7\bin (the JRE install)
So what path does it actually want?
I suppose I could download and install the 32-bit version with the inbuilt JRE but that would be a pretty sorry workaround.
Cheers, APC
Message was edited by: APC - just realised I had typed "with the JRE" instead of "without", which is actually the entire source of the issue. Doh!

The first time you start up Data Modeler, it should prompt for the Java home. You should select the java.exe file within the jre\bin folder of a Java JDK.
Thanks! This was the bit which was confusing me. What I needed was C:\Program Files\Java\jdk1.7.0_21\jre\bin\java.exe
Of course, then I get a message telling me that versions above 1.6 are not certified, but I'm not installing a monstrous rootkit on my new laptop simply to run SDDM, so I guess I'll just rub along without the certification. It seems to start up just fine.
Cheers, APC

Problem installing SQLdeveloper. Cannot find a J2SE SDK error

I am trying to install SQL developer in my windows 7 64 bit machine. It is asking for the java path when clickin the sqldeveloper.exe. I am giving the path of java as C:\Program Files (x86)\Java\jre6\bin where i have java application file available. but i am getting cannot find a j2se SDK installed in the above path error. Please help

Hello,
please ask this in the appropriate forum: {forum:id=260}
It seems to be a common problem
https://forums.oracle.com/forums/search.jspa?objID=f260&q=win+64bit
Regards
Marcus
Edited by: Marwim on 12.10.2011 10:59
added search link

Cannot find '\\file\name'. Verify the path or Internet address is correct. Cannot find any answer any where in this forum.

I cannot find any answer any where in this forum. PLEASE Help!!! I'm receiving this error message every I click on the link, this only happen
on the desktop, but Laptop has no problem to access the file, and everyone else in my group --they don't have issue.
Run Windows 7 Enterprise SP 1, IE ver 9 and 11
Thanks in advance.
Akira

Hi,
Could please clarify the steps to reproduce this issue? Did this issue occur when clicking on a link in an email message within Outlook?
If I didn't misunderstand it, please first try to log into the web mail to check if this issue persists.
If problem didn't exist in webmail, please try to open your Internet Explorer with no add-on mode to troubleshoot the issue. See:
http://support.microsoft.com/kb/976915/en-us
If above didn't fix the issue, please try to reset your Internet Explorer to check the result:
http://support.microsoft.com/kb/923737/en-us
Note: Resetting Internet Explorer isn't reversible, and all previous settings are lost after the reset.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Oracle 11gR1 on Windows Xp Error Cannot find J2SE SDK installed at path

When I type in path for java.exe in SQL Dev. , I get error 'Cannot find J2SE SDK installed at path: C:\Program Files\Java\jre6.' when I entered the path C:\Program Files\Java\jre6\bin\java. What is the reason for this error? How can I correct it? Database installation said it was successful

SQL Developer needs the Java JDK not the JRE to operate successfully. Your path looks like a path to the JRE. There is a windows download that comes complete with a Java Developer kit.
regards
Niall

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

"The system cannot find the path specified." error message when trying to start instaling a software

hi
when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
i use the windows 7

Zohre
What version of the CAD software are you trying to install? Is it compatible with win 7? Older installations (on older OS) installed to a different default location that win 7 does not have.
Wanikiya and Dyami--Team Zigzag

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

"The system cannot find the path specified" error

Hi, Thanks for taking the time and reading.
I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
i get an exception. I have tried a few different formats and it spews the same error.
Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
Things i have tried:
I installed: CRRuntime_64bit_13_0_13
I installed: CRforVS_13_0_13
Took a look at the Procmon and i could not find an access denied error
Event Viewer has no detail.
Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
Code:
if (!Directory.Exists(filePath))
Directory.CreateDirectory(filePath);
string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
Error message:
System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
    at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
    at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
    at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
System Details:
Windows 7 Enterprise N 64 bit
ServicePack 1
IDE:
Visual studio 2010 .Net framework 4
Application is set to run as "Any CPU"
CrystalReports :
dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
Thanks for your help

I don't see where you're ever setting the logons for the tables in the report and subreports. The reports with saved data are working because they already have data in them. The reports without saved data are not working because they don't know how to connect to the database.
See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
-Dell

Error [0x80070003] The system cannot find the path specified

We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS. We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night. The backup shows completed with warnings and generates
2 log files.
The first log files shows:
Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Backup of volume F: succeeded.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
Caption : Backup Using Child Partition Snapshot\FMLRDS1
Logical Path:
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
The 2nd log file more often than not shows:
Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
ShadowStorage' command.
Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
Caption : Backup Using Child Partition Snapshot\FMLDC1
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.
We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows: E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
error in the snapin and will unload and then it shows Object referenced not set to instance of an object." The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.
Any idea as to why this is failing during the scheduled backups? This hosts a database that we need to have regular successful backups.

Hi,
First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
1. Click Start, click Run, type cmd, and then click OK.
2. Type the following commands at a command prompt. Press ENTER after you type each command.
3. cd /d %windir%\system32
4. Net stop vss
5. Net stop swprv
6. regsvr32 ole32.dll
7. regsvr32 oleaut32.dll
8. regsvr32 vss_ps.dll
9. vssvc /register
10. regsvr32 /i swprv.dll
11. regsvr32 /i eventcls.dll
12. regsvr32 es.dll
13. regsvr32 stdprov.dll
14. regsvr32 vssui.dll
15. regsvr32 msxml.dll
16. regsvr32 msxml3.dll
17. regsvr32 msxml4.dll
Please let us know if any command failed to be performed with an error.
If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Cannot find a J2SE ADK instlled at path

Similar Messages

Maybe you are looking for