Cannot get Month and Year display off screen

In Iphoto 6 I have photos that I imported. I cannot get the middle dark oval in the center of the screen to stop displaying on the photos.
It makes it very difficult to edit the photos when I cannot see the center of the photo.
How do I stop the display of the month and date

In iPhoto Preferences, Appearance, uncheck "Show scrolling information."

Similar Messages

By entering month and year in selection screen

Hi Friends,
               My requirement is , when i enter month and year in selection screen and again i press enter now it show me the begin and end date of that month in selection screen.
Thanks & Regards,
Himanshu

u can use this type of code...
AT SELECTION-SCREEN.
DATA it_dynfield TYPE STANDARD TABLE OF dynpread WITH HEADER LINE.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      request              = 'A'
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = it_dynfield
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
READ TABLE it_dynfield WITH KEY fieldname = 'month'.
IF it_dynfield-fieldvalue IS NOT INITIAL.
    month = it_dynfield-fieldvalue.
ENDIF.
READ TABLE it_dynfield WITH KEY fieldname = 'year'.
IF it_dynfield-fieldvalue IS NOT INITIAL.
    year = it_dynfield-fieldvalue.
ENDIF.
use FM HR_JP_MONTH_BEGIN_END_DATE..
get startdate and enddate
AT SELECTION-SCREEN OUTPUT.
startdate = <start date from FM>.
end date = <end date from FM>.

Function module for getting month and year of the previous month (say -6)

Hi,
Is there a function module that will get you the month and year of say, a month before, and as far as 11 months ago.
For example, say today is 6/2007. I want 7 months ago.
How do i get this value?
What function module or method is available?
Points will be rewarded and responses will be appreciated.
Thank You,
John

Hi
lv_period gives the month and year which is two months earlier now as we have specified lv_months as -2.
    DATA: LV_PERIOD LIKE S001-SPMON,
          LV_MONTHS(2) TYPE C VALUE '2-',
          LV_DATUM LIKE SY-DATUM,
          LV_NEWDT LIKE SY-DATUM,
        P_SPMON LIKE S001-SPMON VALUE '200601'.
    CONCATENATE P_SPMON '01' INTO LV_DATUM.
    LV_PERIOD = P_SPMON+0(6).
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
         EXPORTING
              MONTHS = LV_MONTHS
              OLDDATE = LV_DATUM
        IMPORTING
             NEWDATE = LV_NEWDT
         EXCEPTIONS
              OTHERS = 1.
     IF SY-SUBRC = 0.
       LV_PERIOD = LV_NEWDT+0(6).
     ENDIF.
WRITE :/ LV_PERIOD.
OR
Use the following FM for getting the year and the month based on date
CACS_DATE_GET_YEAR_MONTH
or
Call Function 'CCM_GO_BACK_MONTHS '.
Funny module: 03/31/2002 - 1 month = 02/31/2002
OR
RE_ADD_MONTH_TO_DATE ( Add / substract month to/from date )
Need ur reward points.
Best regards,
Ravi

Get month and year from date type

Hi all,
I need to get the month and year from the date type.
For example select to_date('2011-01-17', 'yyyy-mm-dd') from dual;Result needed:
01-2011Any ideas?
thanks in advance,
Bahchevanov.

Hello Bahchevanov,
if you need the date to compute something, then you can
TRUNC(SYSDATE,'mm')This will give you a date with the days removed -> 01.01.2011
Regards
Marcus

Get month and year

I need to pick up the month and year and display it like
Month/Year
I am a newbie and i am not sure how to accomplish this. Do i perform this function using pl/sql and return the value. If anyone could help me with ideas i would appreciate it.
thanks

select to_char(sysdate,'monthyyyy') from dual;

Display month and year in dropdown list on selection screen

Hi
Can anyone tell me how to display months and year in a dropdown list on a selection screen?
also please tell me how to get the first and the last dates upon selecting the month and year on the dropdown list.
Month: January Year:2007 .
After selecting the required month and year, the first date and last date i.e '01.01.2007 - 31.01.2007' should be displayed on the right side.
Reward Points assured..
thanks,
Chetan

Hi..,
<b>
Just copy, paste and execute this program !!</b>
type-pools: vrm.
parameters : p_month(2) type n as listbox visible length 10,
p_year(4) type n as listbox visible length 10.
DATA : W_DATE type d, w_ldate type d.
initialization.
perform user_drop_down_list_fordt.
perform user_drop_down_list_foryr.
start-of-selection.
concatenate p_year p_month '01' into w_date.
call function 'BKK_GET_MONTH_LASTDAY'
exporting
i_date = w_date
IMPORTING
E_DATE = w_ldate
write /: w_date,w_ldate.
build user_drop_down_list
form user_drop_down_list_fordt.
data: name type vrm_id,
list type vrm_values,
value like line of list.
data: t_months type t247 occurs 0 with header line.
clear list. refresh list.
name = 'P_MONTH'.
select * into table t_months
from t247 where spras eq 'EN'.
sort t_months ascending by mnr.
loop at t_months.
clear value.
value-key = t_months-mnr.
value-text = t_months-ltx.
append value to list.
endloop.
Set the values
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
endform.
for year...
form user_drop_down_list_foryr.
data: name type vrm_id,
list type vrm_values,
value like line of list.
clear list. refresh list.
name = 'P_YEAR'.
do 9999 times.
clear value.
value-key = sy-index.
append value to list.
enddo.
Set the values
call function 'VRM_SET_VALUES'
exporting
id = name
values = list.
endform.
<b>
Hope this solves ur problem..</b>
regards,
sai ramesh

Can we modify the pnp selection screen and get only month and year?

Dear Freinds,
              I have requirement where i have to modify the PNP selection screen. So with the help of report category and coding in AT SELECTION-SCREEN OUTPUT , i have modified all the fields relating to dates . i.e i have removed all the radio buttons (i.e Today, Current month,current year etc) and finally
i have landed with only Period ( PNPBEGDA & PNPENDDA range) . But i dont want the PNPBEGDA & PNPENDDA range , but i want only is the month and year ( i.e just like the PNPPABRP & PNPPABRJ)
on my selection screen along with the pernr .
i have used the below code to close all the fields except pnpbegda and pnpendda.
AT Selection-Screen output.
loop at screen.
IF screen-group4 = '098' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '104' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
endloop.
i.e on my selection screen i want only month & year combination and pernr -
when iam using the logical database PNP . Could any one please let me know how can i get only mon & year only on my selection screen .
If it is possible please let me know .
Thanks & regards
divya.

Hi ,
   The requirement is that the user doesnt want to enter the date range i.e for ex: 01012008 to 31012008.
As per the requirement the user will enter only the month and year only . so i on the selection screen
i want only the month and year only . Is there any means i can modify the date period which is there by
default (PNPbegda and PNPendda) on PNP selection screen. Instead of we givign to the user the
PNPBEGDA and PNPPENDA i want is only month and year .
AS already the code has already been written and now they have asked that they want only the month and year on the selection screen.
Please suggest me in this regard.If iam hiding all the buttons relating the dates fields, and now if iam adding the parameters for the month and year it is coming below below the fields pernr , personnel ara and subara , company code , payroll area, employee group of the standard fields of PNP selection screen , there by any body could please suggest me how to change.
regards
divya.

SELECTION SCREEN FIELD FOR MONTH AND YEAR

Hi All.
We are developing a 'Monthly Sales Tax(payable) Report.
they want the report based on the date(in the selection screen it will come only month and year only.).Depends on that month and year for that select-options ,it will pick up the record.
like if, jan 2005 to march 2006.
then it will pick up from 01.01 .20005 to 31.03.2006 records.
Can any body help me to resolve this.
Thanks in advance,
Regards,
Venkat

Hi Venkat,
Copy the following code.
DATA : ws_billfrom    TYPE dats,
        ws_billto      TYPE dats.
DATA : mon TYPE fcltx.
SELECT-OPTIONS: s_month FOR mon
            MATCHCODE OBJECT zsdhtch_sh_mnth
            OBLIGATORY. "o get values for F4
PARAMETER : p_year LIKE bkpf-gjahr
             MATCHCODE OBJECT zsdhtch_sh_year
             OBLIGATORY.
RANGES : s_date FOR sy-datum.
DATA : ws_fcmnr TYPE fcmnr.
START-OF-SELECTION.
SELECT SINGLE mnr
         INTO ws_fcmnr
         FROM t247
         WHERE ltx = s_month-low.
CONCATENATE p_year ws_fcmnr '01' INTO ws_billfrom.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
       EXPORTING
            iv_date             = ws_billfrom
       IMPORTING
            ev_month_begin_date = ws_billfrom
            ev_month_end_date   = ws_billto.
s_date-low = ws_billfrom.
s_date-high = ws_billto.
s_date-sign = 'I'.
s_date-option = 'BT'.
IF NOT s_month-high IS INITIAL.
    SELECT SINGLE mnr
           INTO ws_fcmnr
           FROM t247
           WHERE ltx = s_month-high.
    CONCATENATE p_year ws_fcmnr '01' INTO ws_billfrom.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
         EXPORTING
              day_in            = ws_billfrom
         IMPORTING
              last_day_of_month = ws_billto.
    s_date-high = ws_billto.
ENDIF.
APPEND s_date.
WRITE s_date.
You can write your select statement here.
select * from dbtable where date in s_date.
If 'HR_JP_MONTH_BEGIN_END_DATE' is nto there in your server, you can use 'RP_LAST_DAY_OF_MONTHS' in both cases.
Regards,
Susmitha.
Dont forget to reward points for useful answers

HT4759 my ipad is giving me a message "icloud backup: this ipad hasn't been backed up in 32 wk..." but I cannot get this message to clear off my screen. I'm unable to turn the ipad on/off or do anything else with it.

My ipad is giving me the message "this ipad hasn't been backed up in 32 weeks..." but I cannot get the message to clear off the screen. When I plug the ipad into my computer to back it up the message still will not clear off the screen and I cannot acess anything on the ipad. I cannot even power it off.

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

TO GET WEEKS for a given MONTH AND YEAR

Is there any FM to get the no of weeks for a given month, say 01 2005.
Can i get the week numbers say 1 2 3 4 5 for the given month and year.
Please let me know.
Happy Holidays.
Regards,
Manohar E

Hi Manohar,
Use FM DATE_GET_WEEK twice; first time pass first day of the month and again pass the last day of the month as a parameter. So u will be having week number(yyyyxx) for the first week of the month and week number for the last week of the month. From these two, in between week numbers u can easily fetch. I hope this will help u out.
Regards,
Kavya Shah

To get first date and end date after entering any month and year

Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.

I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
     cal.setTime(new java.util.Date());
     cal.set(Calendar.DATE, 1); //set the date to start of month
     cal.add(Calendar.MONTH,1);
     cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime());

Anyone help me ...I am writing to get Date, Month and Year...I got errors

Could some body help me:
I am try to get Date, Month and Year
I got stuck, Anyone help me this:
public class DateMonth
public static void main(String[] args)
toDay = new toDay("February 21, 2002");
dayofWeek = today.getDay();
System.out.println("Current month is " + toDay.getMonth());
System.out.println("Current day is " + getDate());
System.out.println("Current year is " + toDay.getYear());
toDay.setDate(toDay.getDate()+60)
System.out.println("Sixty days from now is ");
System.out.println(toDay);
}

Try something like this:
import java.util.*;
public class DateMonth {
     public static void main(String[] args) {
          // Note: 0 = January
          Calendar calendar = new GregorianCalendar();
          System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
          System.out.println("MONTH: " + calendar.get(Calendar.MONTH));
          System.out.println("WEEK_OF_YEAR: " + calendar.get(Calendar.WEEK_OF_YEAR));
          System.out.println("WEEK_OF_MONTH: " + calendar.get(Calendar.WEEK_OF_MONTH));
          System.out.println("DATE: " + calendar.get(Calendar.DATE));
          System.out.println("DAY_OF_MONTH: " + calendar.get(Calendar.DAY_OF_MONTH));
          System.out.println("DAY_OF_YEAR: " + calendar.get(Calendar.DAY_OF_YEAR));
          System.out.println("DAY_OF_WEEK: " + calendar.get(Calendar.DAY_OF_WEEK));
          // 60 days from now
          calendar.add(calendar.DATE, 60);
          System.out.println("\nSixty days from now");
          System.out.println("MONTH: " + calendar.get(Calendar.MONTH));
          System.out.println("DATE: " + calendar.get(Calendar.DATE));
          System.out.println("YEAR: " + calendar.get(Calendar.YEAR));
}Remember that January is 0!
Take a look at the GregorianCalendar class:
http://java.sun.com/j2se/1.3/docs/api/java/util/GregorianCalendar.html
Hope this helps!
DesQuite

Selection screen - month and year

Hi friends,
I have a selection screen where I need to have two fields one for Period(month) and the other for Fiscal year. So I used
parameters    : p_lfmon   like mbewh-lfmon.
parameters    : p_lfgja   like mbewh-lfgja.
My requirement is when I execute the program I want to see the current period(08) and Year(2006) in these two fields. And also I was wondering if we can add the input help F4 for these two fields as they dont have one right now.
Finally if I want to compare the these two fields month and year with a field in normal date format (08/25/2006), what is the easiest way to do that.
Waiting for replies. Especially from Rich. Thanks

If you need to default the current fiscal period, then you can do this.
report zrich_0001.
data: datum type sy-datum value '20060806'.
parameters: p_spbup type spbup .
initialization.
data: xgjahr type bkpf-gjahr.
data: xpoper type t009b-poper.
call function 'FI_PERIOD_DETERMINE'
       exporting
            i_budat = sy-datum
            i_bukrs = '0010'
       importing
            e_gjahr = xgjahr
            e_poper = xpoper.
concatenate xgjahr xpoper+1(2) into p_spbup.
start-of-selection.
if datum+0(6) = p_spbup.
    write:/ datum, 'is in period', p_spbup.
endif.
Regards,
Rich Heilman

Getting Day, month and year from Date object

hello everybody,
Date mydate = Resultset.getDate(indexField);
Now i would like to get day, month and year from mydate.
In another words, i'm looking for something equivalent to
mydate.getDay() as this method is deprecated.
Can somebody help me out please?
Thank you in advance,

swvc2000,
Here is a sample class that demonstrates two ways in which to do this.import java.util.*;
import java.text.*;
public class DateSplitter {
   public static void main(String args[]) {
      /* even though your date is from a result set,
         pretend the following date is your date that
         you are using. The try catch block is used
         because I hand-crafted my date using
         SimpleDateFormat. Substitute your date.*/
      Date yourDate = null;
      try {
         SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
         yourDate = formatter.parse("05/06/2000");
      } catch (ParseException e) { }
      //the following gets the current date
      Calendar c = Calendar.getInstance();
      //use the calendar object to set it to your date
      c.setTime(yourDate);
      //note months start at zero
      int month = c.get(Calendar.MONTH);
      int year = c.get(Calendar.YEAR);
      int dayOfMonth = c.get(Calendar.DAY_OF_MONTH);
      System.out.println("Calendar Month: "+month);
      System.out.println("Calendar Day: "+dayOfMonth);
      System.out.println("Calendar Year: "+year);
      System.out.println();
      /* Simple date format can also be used to strip them
         out of your date object. When you use it, notice that
         months start at 1. Also, it returns string values. If
         you need integer values, you will have to use
         Integer.parseInt() as I did below. If you are
         only concerned about the string values, just remove
         the Integer.parseInt part. */
      DateFormat formatter = new SimpleDateFormat("M");
      month = Integer.parseInt(formatter.format(yourDate));
      System.out.println("SDF Month: "+ month);
      formatter = new SimpleDateFormat("d");
      dayOfMonth = Integer.parseInt(formatter.format(yourDate));
      System.out.println("SDF Day: "+ dayOfMonth);
      formatter = new SimpleDateFormat("yyyy");
      year = Integer.parseInt(formatter.format(yourDate));
      System.out.println("SDF Year: "+ year);
   }//end main
}//end DateSplitter classtajenkins

Need to combine month and year to get date YYYY-MM-DD format

Month and year are table fields and they will have values like
Month in format = mm example 01
year in format = YYYY example 2010
Now i need to concatenate month and year to derive date .
Expected result Result :2010-01-01
Example :Month =01
Year =2010
Mudassar

The principle of any tiered architecture is that display formatting is done in a presentation layer. This is not just SQL and Client/Server programming; it is the foundation of all modern programming. Not knowing this is like a doctor who does not know
about germs or a chemist who does not know about atoms.
This is reviewed in the first 1-2 weeks of any database class. Why are you violating it??
Next, you do not even know that column are not fields!
T-SQL now has a DATE data type, which defaults to the ISO-8601 display format (yyyy-mm-dd). Are you using it? If you had been polite we would see your DDL and know.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Cannot get Month and Year display off screen

Similar Messages

Maybe you are looking for