Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Hi, I'm facing a problem with my old printer, the xerox phaser 3160n. It was connected to my notebook through network connection, and everything works well with Adobe X /Win 7 OS (including the double side print, of course) last month, I have upgraded my NB to windows 8 with clean install
clean install my printer driver for windows 8 too, and Adobe reader XI was also downloaded through official website.
However, since I was about to use double sided print in Adobe reader XI (11.00.02) it couldn't obey the order, but just print one side as usual
I have checked the "option" of my printer, and it was correctly set to "double-sided print". I have tried word 2013 to open the same pdf, and choose the same "double-sided print" and it works perfectly.
Is this problem a bug? and would it be corrected in the next update version??
(I remeber I've saw a similar issue too, with network printer, but I couldn't find it)
Thanks!!!

Hi,
Meanwhile, after insatlling the latest driver for printer from the manufacture website, restart the spooler service as a test.
Start > Run > cmd and type "net stop spooler" after that "net start spooler" or start > run > service.msc and restart it over the GUI.
Run Printer Troubleshootor under Action Center\Troubleshooting\Programs\Printer, and check if it helps.
And yes, the manufacture should have more sence about the printer, it's recommended to contact them.
Yolanda Zhu
TechNet Community Support

Similar Messages

Canon IR 3235 -- snow leopard -- problems with network printer

Hi,
since yesterday I've problems to print to the network printer [canon IR 3235-3245] -- updated to snow leopard ca. 14 days ago, then experienced printing problems, search this list for answers, then downloaded new canon drivers, re-configured the printer in system preferences, send the print command --- and got 100s of white sheets of paper instead of the 2 pages I wanted ...
what was wrong, or can anybody give me a clue to solve this?
thanks, bommelkamp

Hello and welcome to Apple Discussions.
With regards to the printing of 100's of white sheets, this could be a result of using the Canon PPDs but not having the PostScript license enabled in the iR3245.
The iR3245 series is supported by the Canon UFR2 v2.00 driver. This is the driver to download if you haven't done so already. With this driver installed, you create an IP printer using LPD as the protocol and a queue name of LP. Then in the Print Using select the "Canon iR3235/iR3245 UFR II (UK)".
Alternatively you can use Generic PCL Laser Printer for the printer model instead of the Canon UFR2 driver. This will get you printing but does not support any of the copiers finishing options.
Pahu

Printing dashboard with network printer

Is there any way to send/print the dashboard page to physical network printer? i am having links to HTML print and PDF print. But i want to print with network printer. please give some suggetion.
thanks

Currently there is no out of the box solution. But with some amount of work you can make it very robust by using ibots and BI Publisher Java APIs. You need to basically call the delivery manager API from the ibot. You can pass the output of a dashboard to the API which can print to a local printer. I have an example in my blog entry here http://oraclebizint.wordpress.com/2008/02/01/oracle-bi-ee-101332-calling-bi-publisher-java-apis-from-ibots-storing-reports-in-file-system-using-delivers-and-bi-publisher-scheduler/. Though this talks about storing the reports in a file system, the idea is the same. Instead of a file-system destination use printer as the destination.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Adobe Reader X: There is a problem with Adobe Acrobat/Reader. (127:0)

I am getting an error when i am opening an pdf document inside an other application (Attensity Respond).
"There is a problem with Adobe Acrobat/Reader. If it is running, please. exit and try again (127:0)"
I am using Adobe Reader Version 10.0.1 installed under Citrix XenApp 6.5 Windows 2008R2.
Has anyone an idea how to fix this issue?
Thanks
Martin

I don't know what this means. All I can suggest that you try updating your old Reader version to the latest (10.1.9 or 11.0.6).

If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?

Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
Thanks for any help.

Hi WMdotcom
did you try to view pdf with your acrobat pro 9 ?
see
[https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
[https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
Set how Firefox handles different types of files]
thank you

How do i install adobe reader 7? Am having problems with 9

I cannot open PDF files...have recently upgraded to
windows 7 because i thought that would resolve this
pdf issue. It did not.

Have you tried uninstalling Reader 9, then reinstalling it?
If you really want to install Reader 7, you can download it here http://ardownload.adobe.com/pub/adobe/reader/win/7x/7.1.0/enu/AdbeRdr710_en_US.exe
Uninstall Reader 9 before installing version 7. Be sure to update it to the latest version 7.1.4 afterwards. And please note that this version is no longer supported, i.e. Adobe is no longer issuing security fixes for Reader 7.x.

PDF Printing problems with networked HP Laserjet C5020N

Hello,
I'm having problems printing documents that I've created with the PDF creator of Office 2007. When I try to print only the first page, the printer correctly prints, but when I try any other job (printing the whole document, only the 2nd page, page 1 and 2, and so on) the printer refuses and prints one sheet that says:
Error Name: /undefined
Offending Command: --file--
Operand Stack:
I use Adobe Reader 8.1.0.

Also having other "permission" based problems as well. Other people cannot open my PDFs even though I have not used any security. I'm thinking about getting a previous version of Accrobat Pro and installing that.

Communication problem with network printer

I have a Lexmark X9350 all-in-one printer. It has a built in wireless card and I am trying to print to it from my Powerbook G4. I have an airport extreme network setup in my home, and my PC is able to access the printer just fine. When I installed the printer software on the mac, it recognized the printer on the network and worked at first, but then suddenly couldn't find the printer. When I uninstalled and reinstalled the software it was very strange because when I got to the point where it searches the network for a printer, sometimes the printer shows up, and then if I click to refresh the printer sometimes disappears. It is not an issue with being out of range, because the printer display tells me it has plenty of connection, and as I said the PC can print with no problems. It appears to be something specific with Tiger not being able to consistently detect the printer.

I would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.

Problem with network printer on Windows 7 machine

I'm running Mavericks on a Mac Mini. I have a Windows 7 machine with an attached Brother HL-5340D printer. I'm using the Brother HL-5340D CUPS driver. Whatever configuration I use, I cannot get my Mac to print from the Brother. I have even set up dhcp on the Mac and connected to the Windows machine with a cable. I have tried ipp, ldr/ldp, windows, ip, and most of the relevant options under advanced, and nothing works. I've run out of ideas on what to try and how to test and where to look for hints. All I get is the following:
Unable to connect to ‘192.168.33.2’ due to an error.
Not a lot of help.

James Wilde wrote:
1. I forgot to say that it was the Mac equivalent of dhcpd that I turned on so that the Mac is the server, on 192.168.33.1, and it has assigned the number 192.168.33.2 to the Windows box. And yes, I do prefer in these cases to use fixed addresses, but the Windows box seemed reluctant to accept its ip address thus the decision to start dhcpd on the Mac. After that I could not ping the Windows box from the Mac box. I didn't try to ping the Mac from the Windows box. I'll try that tomorrow. As to the network, there are only these two machines on the cable network. The default router on the Windows box is, if I remember correctly, set by dhcpd to the ip address of the house router. I have now disabled the cable network. See below.
Unusual that you could not ping Windows from the Mac. Would explain why you got a connection error with this setup. But if you have now stopped using the cable connection then this is mute.
James Wilde wrote:
2. The network profile is set to Home on the Windows box. I don't see any references to Homegroup in any of my messages on this topic. If you are referring to another post I made on a different subject, I am aware of the problems with Homegroup, and as far as I know, I have avoided this, since my wife's Windows box is the only Windows box in the house. Everything else is either Mac or Ubuntu, apart from one or two Windows virtual machines on my Mac and Ubuntu boxes.
No, you didn't mention Homegroup but you did mention not being able to see the Windows computer "Incidentally I now find that I can't get any result from selecting Windows in the Add Printer dialog." So I thought I would mention that Homegroup can cause this.
James Wilde wrote:
3. I've tried all three options in the Add printer dialog, IP, Windows, and Advanced. Under Advanced I have tried lpd and spoolss and ipp, under ip I have tried ipp and lpd. The share name is Brother-HL-5340D, and the hyphen between Brother and HL I put there myself to make it one 'word'.
I've just tried your suggestion and get the following when I click on Add.
Unable to verify the printer on your network.
Unable to connect to ‘192.168.1.202’ due to an error. Would you still like to create the printer?
I've seen this occur when the LPD process is not working. Open the Services pane on the PC and check the LPD service has started. If it is running and you still get the error message, what happens if you say yes to creating the printer?
James Wilde wrote:
As i said, I have disabled the cable network and am using the house wifi network (all machines with fixed IPs). I can ping the computer and have just mounted a disk on her computer with smb using Finder/Go. The mount does appear to be read only, but at least I can open all the folders.
Anything else I can try?
That is a good outcome. Proves there is a functional path between both computers.
Since you can connect using SMB, and if you cannot LPD to work, then try adding the printer again using the Windows view in the Add printer pane. You should see the workgroup used by the Win7 PC followed by the Win7 computer name. Selecting it should prompt you to authenticate (unless you have saved the account in Keychain) and then the printer share name should appear. After selecting the share, select the Generic PS driver as a test to see if you can submit a print job - open the print queue on the Win7 PC to see if the print job appears. If this does work, you can remove the printer on the Mac and add again, this time selecting the Brother driver and then see if this works.

PSE 9 printing problem with Epson printer

hello there,
I am using PSE 9 with Windows XP and Epson 3880 printer. I have re-installed all programs/drivers a couple of times. PSE9 Printer dialogue will not let me print choosing "Let Photoshop Manage Colour". It will only let me print with "Let Printer Manage Colour". I am using Epson papers.
When I select "Let Photoshop Manage Colour", a box appears saying "ICC profile no longer available" and it won't let me print. Is this a PSE 9 problem or an Epson problem?
thanks !!!

Well, I actually found the answer. I spoke to an Epson Rep!
I used to have the Epson 2200 printer, then the Epson 3800, and now I use the 3880 printer on Windows XP and Windows 7 on my laptop.
When you uninstall the other 2 printers, the color profiles are still in your program files and can become corrupted.
This is why, in PSE 9, when I checked the box Let Photoshop Elements Manage Colour, it woildn`t print and instead there was the pop-up box ``ICC profile no longer available`` because it was trying to access the old paper profiles and not the ones that came with the 3880. I use Epson papers, by the way.
The solution was to go into C-Drive, Program Files, System 32, spool,drivers, colour, and this opens to the ICC profiles used by the printer. Then I deleted the old paper profiles associated with my former printers.
And it worked !!

Printing problems with new printer

I printed out two different InDesign documents last week with my ailing Epson R260 inkjet printer and everything printed fine (with the exception of the printer head problems with the R260).
I purchased and installed a new Epson Artisan 50 (which is supposedly the successor to the R260) today, and when I print out the same documents the images and text are reduced in size by about 1/3 and part of the page is not printing. I have made no changes to the InDesign files so I don't understand why I am having this problem. Hope someone can help.

From ID's print dialog, have you entered the Artisan's Advanced Features (the Setup button at the botton of the Print dialog). The doc could be calling up info from the last printers features.
Also, the drivers on that CD could be old, always check for Driver Updates from the manufactures site when installing anything.

Printing problems with CS3- Prints dont match what is on screen

My prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended.
I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
I couldnt find this topic on the forum here. I am sure others must have had this problem too. What is my solution?
Thanks in advance
KB

There are a bunch of things that can affect the difference between what you see on screen and what you get in print. It is not enough to just look at calibration. Calibration is a starting point. Here are some things that may affect your result:
* Your monitor type
* Your PC type (laptops may not be best for image correction)
* Your calibration device
* The lighting in the area you work in
* Choices made while calibrating
* Proper setup for using the ICC profile (e.g., you aren't running conflicting software)
* Proper color management setup
* Smart choice in color space / working space selection
* Sensible choices for any other color management changes (if any)
* Careful use of on screen proofing settings
* Sensible choice for color management in capture (on camera or with scanner)
* Smart use of color profiling
* Good choice of printing materials / inks (as applicable)
* Good choice of equipment for printing
* Proper maintenance of printing equipment
I'm probably missing a few there, but I'll work on it. The best scheme I think is to keep things as simple as possible. Especially if you are having trouble, eliminate variables. When you get things working as you expect, then you can try to get a little more fancy. However, every variable you add will come with drawbacks in one form or another. Freeagent seems to make some sense here...
Richard Lynch

Recurring Printing Problem with HP Office Jet Pro L7590 w/Windows XP operating system

This printer is a real workhorse but frequently, when printing large documents from the internet, the type changes from regular print to total giberish -something similar to a Russian Script. It does this midsteam into the document and there is no error message or any indicatin that something is wrong. It is also hit or miss-sometime I get the entire document in English and sometimes I don't. Unfortunately, I'm wasting a ton of paper and time to redo everything when it occurs.
Other than the above, it works fine. Any suggestions on how to correct?

So the printer will begin to print garbled text in the middle of large document print jobs, from time to time? Is this correct?
How is the L7590 connected to the WinXP PC? (USB, ethernet, wireless)
How long is the USB cable if connected this way?
How far away from the router is the printer if connected wirelessly?
If usb connected, how old is the USB cable?
It is possible that this problem is coming from a connection problem. If a minor connection issue exists, then it can leave portions of the print language being sent as commands to the printer out. This can change the printer's interpretation of the printer command language.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing Problem with Wipro Printer

hi ,
i have developed the smartform which contain page format of size height DINA4 .when i am giving print in wipro dot printer it is printing in correct postion in first page but in next page it displaying below the postion what i am given .plz tell me how to solve the problem.

Hi,
If you are using front end printing then try just by changing the device types it would work.Also check your printer settings at your end.
Regards,
Vamshi.

Printing Problem With Wipro Printer its very urgent

hi ,
i have developed the smartform which contain page format of size height DINA4 .when i am giving print in wipro dot printer it is printing in correct postion in first page but in next page it displaying below the postion what i am given .plz tell me how to solve the problem.
Edited by: srinivas peram on Mar 29, 2008 7:00 AM

Hi,
If you are using front end printing then try just by changing the device types it would work.Also check your printer settings at your end.
Regards,
Vamshi.

Adobe reader XI: doule sided print problem with network printer (windows 8 pro)

Similar Messages

Maybe you are looking for