Cannot get NDES working on Server 2012 R2 at all.

I absolutely cannot get this to work. I simply cannot figure out what I am either doing wrong or missing.
Neither site works and in the event log I get the following:
The Network Device Enrollment Service cannot retrieve one of its required certificates (0x80070057).
The Network Device Enrollment Service cannot be started (0x80070057).
It seems like I've read every site on this and tried everything but simply cant make it work. Have not tried on 2008 r2. Below is what I have done if someone can help me I would be grateful.
I tried adding more permissions than needed on local machine certs, templates, and domain level as well
Tried the http://support.microsoft.com/kb/2800975 where you move the ExtensionlessUrlHandler-ISAPI-4.0_64bit below
the static file.
I tried using and not using the use local profile in IIS for the SCEP pool
Both the ndesservice acccount and admin account have full control on everything.
I also tried to leave the default settings in the reg for the templates.
This is the NDES log out put when turned on:
========================================================================
402.534.948: Begin: 7/23/2014 4:01 PM 32.507s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/23, 16:01:32>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/23, 16:01:32>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/23/2014 4:01 PM 32.585s
402.534.948: Begin: 7/24/2014 2:31 PM 03.904s
402.539.0: taskhost.exe
402.543.0: GMT - 5.00
2005.220.0: certca.dll: 6.3:9600.16384 retail
2005.220.0: certenroll.dll: 6.3:9600.16384 retail
2004.621.0:<2014/7/24, 14:31:3>: 0x80070005 (WIN32: 5 ERROR_ACCESS_DENIED)
2004.642.0:<2014/7/24, 14:31:6>: 0x80070006 (WIN32: 6 ERROR_INVALID_HANDLE)
402.379.949: End: 7/24/2014 2:31 PM 06.122s
EVENT LOG
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module   IsapiModule
Notification   ExecuteRequestHandler
Handler   ISAPI-dll     Error Code   0x80070057
Requested URL
   http://localhost:80/certsrv/mscep_admin/mscep.dll
Physical Path
   C:\Windows\system32\CertSrv\mscep\mscep.dll
Logon Method   Negotiate
Logon User   FARAWAY\NdesService
INSTALL STEPS
SETUP DOMAIN ACCTS:
Created Domain acct ndesservice (added to ndes server admin group and IIS group)
Created Domain acct ndesadmin (added to Enterprise Admins and ndes server admin group)
Ndes Server Profile Added
-Logged on as ndesservice account so profile is created on ndes server
DOMAIN CA (Server 2008 r2)
-Applied kb2483564 to 2008 r2 domain CA
-Duplicated (Exchange Enrollment Agent (Offline request),Cep Encryption,IPSec (Offline request) templates)
Added ndesservice, ndesadmin, and ndes server with read and enroll on all three
-All three cer copies prefixed with ndes
-Issued Certs
-CA properties (added ndesservice account and ndes machine acct read and request)
-Added ndesservice account to local admin group
Set SPN for ndesservice domain account
-setspn –s http/gimli.faraway.com faraway\NdesService)
NDES SERVER (Server 2012 R2)
Installed NDES under CA Role using ndesadmin account (member of enterprrise admins group)
-Added Request Filtering in IIS (tried with adding and without)
-Added .Net extensability options (tried with adding and without)
Post Deployment on NDES Server
-set creds to configure role services to faraway\ndesadmin
-Set service account to faraway\ndesservice
-Set ca to pippin.faraway.com\farway (it picked this up automatically)
-Entered cert info left keys at defualt of 2048
NDES Server Registry changes
-HKLM\Software\Microsoft\Cryptography\MSCEP (changed templates from default of IPSECIntermediateOffline to NDESIPSECIntermediateOffline
also tried the template name NDESIPSec(Offlinerequest) from the copy
-Added faraway\ndesservice account full control of MSCEP and below
-HKLM\Software\Microsoft\Cryptography\MSCEP\EnforcePassword (change from 1 to 0)
Ndes Server IIS applicattion Pool Identity
-IIS SCEP App pool set Load User profile from false to true
NDES Server Certificates
There were two Certs created when the role was installed in the machines personal store. I dont think I am supposed to do anything here other than add permissions?
-Added ndesservice account and machine account with full control
Both the CA and NDES server have been restarted multiple time. Am I doing this right and missing something in IIS 8.5? I Hope I provided enough info.

Learning a lot lol. Never had to do either IIS tracing or capi logging. Turned it on.
This is the log
Level
Date and Time
Event ID
Task Category
Information
7/25/2014 12:25
81
Verify Trust
Information
7/25/2014 12:25
90
X509 Objects
Information
7/25/2014 12:25
30
Verify Chain Policy
Information
7/25/2014 12:25
11
Build Chain
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
41
Verify Revocation
Information
7/25/2014 12:25
51
Retrieve Object from Cache
Information
7/25/2014 12:25
50
Retrieve Object from Cache
Information
7/25/2014 12:25
40
Verify Revocation
Information
7/25/2014 12:25
10
Build Chain
Information
7/25/2014 12:25
80
Verify Trust
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
42
Reject Revocation Information
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects
Error
7/25/2014 12:24
30
Verify Chain Policy
Error
7/25/2014 12:24
11
Build Chain
Information
7/25/2014 12:24
90
X509 Objects
Information
7/25/2014 12:24
41
Verify Revocation
Information
7/25/2014 12:24
40
Verify Revocation
Error
7/25/2014 12:24
41
Verify Revocation
Error
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
53
Retrieve Object from Network
Information
7/25/2014 12:24
52
Retrieve Object from Network
Error
7/25/2014 12:24
42
Reject Revocation Information
Information
7/25/2014 12:24
51
Retrieve Object from Cache
Information
7/25/2014 12:24
50
Retrieve Object from Cache
Information
7/25/2014 12:24
40
Verify Revocation
Information
7/25/2014 12:24
10
Build Chain
Information
7/25/2014 12:24
70
Acquire Certificate Private Key
Information
7/25/2014 12:24
90
X509 Objects

Similar Messages

Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

This code work fine in server 2008, but get this error in server 2012. Do yo have any idea?

Need some more info as to where this is installed and how.
First thing to try would be to uninstall the solution and reinstall.
Check the GAC for your assembly as well as web.config.
If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
Brandon James SharePoint Developer/Administrator

Cannot get maile connection to server failed

followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password. I do use a different ID than my apple ID for my icloud account. I use my me.com email address. I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone. Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
lee

Hi HLSdoc,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Issues sending or receiving mail on iPhone, iPad, or iPod touch
Best of luck,
Mario

Adobe Flash v11.3.370.178 not properly working in Server 2012 RP?

Has anyone gotten the bundled Flash to work in Server 2012? Even if I completely disable all security within IE x86/x64/RT, the best I see is a blank interface for Flash that is the correct
size of what I'm trying to load, but no content displays and no flash interfaces show up. Right clicking does bring up the Flash context menu. If from there I go to About Adobe Flash Player, the version info will only show up on Adobe's site right
as I close the tab, and it’s much larger than it should be for the half a second it shows up.
This is broken in the released VHD and ISO so far as I can tell.

I always control the majority of IE settings via Group Policy and normally set the zone to medium-high. I
never launch or elevate any browser with a user who’s a member of the Administrators group unless diagnosing an issue, and even then I normally do it within a snapshot. I don't even
run browsers as my normal limited user, I always de-elevate them to a different user who can't masquerade as my normal authentication.
I've had Flash x64 working in 2008 R2 since October, and x86 since 2003 Server. Never had a real problem with it on an RTM version of Windows, but heh, betas!
I'm not sure what you mean by Windows controlling Internet Security. There are some settings that other browsers will respect from Internet Settings, but not many, and the firewall works
as a firewall should, can you clarify?
Devin Lanei
If security, privacy or contents settings in "Control Panel\All Control Panel Items\Internet Options" are more restrictive than the Firewall, the Internet Options will govern. Specifically, when it comes to scripts, executables or anything
else from the internet that Windows thinks could change the system when it is opened, Windows will not let it be opened. I don't really know this for a fact, it is just my opinion, but I've seen enough indications. And UAC just makes it worse.
You are right that this is best done with Group Policy, especially on production systems. The only reason you would do what I described is that it is an isolated test system and you are trying to get clues as to what policies you could try
setting to get it working the way you want (on the test system, of course).
I have my USB flash setup the way I want it and I will test it tomorrow. It seems I never do anything the easy way, I had to make it elaborate. I have set up so that it should be able to boot both efi and mbr, and will offer a menu of four OS setup
entries and a Recovery Console entry. I've got Windows7, Windows 8, Server 2008R2, and Server 2012, all x64. I've been using bcdedit for most of the last five or six hours.

I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last. What h

I changed my server at the end of May & all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened & can I get email back to normal?

Hello Stern snapper
If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
-Norm G.

TS3276 I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

I cannot get my outgoing SMTP server togo "On-Line" and cannot send out emails.

I had this problem too but I fixed it today.
Go to the mail menu preferences.
Click on account in question.
Select the outgoing SMTP mail server (the one offline), this has a drop down list, click on the edit server list.
Click on the advanced button.
Make sure use default port is checked.
Make sure SSL is unchecked (unless your provider requires it, mine does not work with it checked).
Have authentication set to password.
User name should be your email address for that account.
Make sure correct password is entered (for some strange reason my password box was blank on this account).
Push the ok button.
For me the SSL box was checked and the password was missing. This is strange to me considering I have unchecked the SSL Box on the mail preference advance page. Also, I went through the complete set up account when I first created the account, why was my outgoing server password box empty?
I hope this helps.
Here is a link to some visual aids with the steps from my ISP
http://support.knology.net/content/smtpauth/smtpredirect.cfm

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

Question: I cannot start my iPhone 4. It just "died". I connected it ti my Mac, but tha Mac doesn´t recognise it. Any ideas how to wake the phone.The battery is fine, I just cannot get it working!

See Here for
Frozen or unresponsive iPhone
Try this first... You will not lose any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the suggestions again.

Have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lis

have Adobe's Digital Edition, now I wanted per bookcase the books in a list printing, but printing can not activate. I cannot get it working to someway to print lists. Please tell me what the cause is that this fails or what should I change to get the lists be printed

Hello, Edward and thank you for your note.
I read through the thread you mentioned and it seems that people are having a lot of problems with the iCloud clients, so we're not alone, but the unique issue in my case is the failing email address vs. the working perfectly email address.
After reading your message tonight, I tried my setup again with the preferred Apple ID (the one without the "." between the names), and for the first time ever, IT WORKS. Mail app configured the servers both send and receive as p01-smtp.mail.me.com and p01-imap.mail.me.com. For the first time, I'm able to send and receive into the Mail app, create mailboxes, move messages into and out of mailboxes, keep Sent messages, etc.
I had a 50-minute support chat with MobileMe support via ExpressLane on Monday afternoon. They couldn't resolve my issue but passed me on to escalation. I was told to expect to get an email from advanced support by this afternoon, but none has arrived. However, so far tonight -- and I will check again tomorrow several times before declaring victory -- it looks like something has been fixed on the Apple end to make things work.
I will report back after I do some additional testing tomorrow to make sure the fix is real and is solid...and before I let my friend, the new Mac user, know the good news.
Regards,
Mike

Updated to ios 7 cannot get mail the connection server failed

I updated to ios 7 yesterday and today I keep getting "cannot get mail the connection server failed". Also the safari gets stuck or takes awhile to load the page

Was there ever a response/solution to this? There's plenty of occasions where this seems to have happened but this thread is exactly what's happening to me. I am currently in Spain and trying to use Yahoo mail.
My mail is updating occasionally but if i try to force an update i get "cannot get mail...the connection to the server failed". Also if i try to send and email i get "a copy has been placed in your outbox....the connection to the outgoing server apple.smtp.mail.yahoo.com failed...additional servers can....."
I checked my mail settings and the defined server isn't prefixed with "apple".

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Having trouble getting "Set action to take when logon hours expire" to work - Windows Server 2012

I have a Windows Server 2012 server that allows remote desktop users (sessions are hosted on the server itself). I'm trying to enforce logon hours for these remote desktop users.
I have specified logon hours for a user and confirmed that they work--they aren't allowed to logon when logon hours are disabled. However, they are allowed to continue a session past their logon hours limit if they are already signed in (which is fine, this
is the default behavior).
However, when I try to use the `Set action to take when logon hours expire` option (`User Configuration/Administrative Templates/Windows Components/Windows Logon Options/Set action to take when logon hours expire`), and set the behavior to "Logoff",
nothing happens--the user can continue their session happily. I've tried applying this policy both for the user's group and for the local computer. I've run `gpresult` for the user and confirmed that the policy is apparently in place.
I also naively tried the "Force logoff when logon hours expire" option, but that apparently doesn't apply to interactive logins (confusing!).
Am I misapplying this setting, or do I need to take some other steps to get it to work? I'd be grateful for any input. Thanks!

Hi,
Sorry for the late response.
We can log off and log on again to see whether the setting gets applied.
According to
Policy Settings that require a reboot or logon section in the following article, this setting needs a logon.
Deploying Group Policy Using Windows Vista
http://technet.microsoft.com/en-us/library/cc766208(v=WS.10).aspx
Best regards,
Frank Shen

APEX Oracle 11g HTTP Server - Cannot get SSL working

I have installed APEX on Oracle 11g with the Oracle HTTP Server on MS Windows server.
Data base up and running, APEX up an running.
All works as expected on port 7777
When I try 4443 I get error message re self signed certificate by Oracle, but if I click through error message I get an https connection.
I want to replace default cert with a locally signed cert, and get SSL working on 4443, then switch to port 443.
I have used the Oracle Wallet manager, generated a CSR, had this signed by my corproate CA, and installed the corporate CA cert and the newly signed server cert into the wallet (with Auto Login Set) and saved it in:
D:\orahttp\Oracle_WT1\instances\apex\config\OHS\ohs1\keystores\infosec2wallet
This creates two files: ewallet.p12 and cwallet.sso
I then manually add the group/users "SYSTEM" and "Administrators" to these two files to match the security tab on the default wallet.
I T then go to the ssl.conf file located at:
D:\orahttp\Oracle_WT\instances\apex\config\OHS\ohs1\ssl.conf
and changed the entry:
#SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/infosec2wallet"
I then stop and start the Oracle HTTP Server - ohs1 from the start menu.
Then I try to connect from my desk top machine using the following URL:
https://us-pghinfosec2.ariba.com:4443/pls/apex/f?p=101:1:
I get the clasic MS IE Message:
==========
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.
For offline users
You can still view subscribed feeds and some recently viewed webpages.
To view subscribed feeds
Click the Favorites Center button , click Feeds, and then click the feed you want to view.
To view recently visited webpages (might not work on all pages)
Click Tools , and then click Work Offline.
Click the Favorites Center button , click History, and then click the page you want to view.
==========
I am at a loss as to what to do. It acts like Oracle HTTP can not open my wallet.
I suspect it needs the password to the wallet but I cannot find any place to specify the password, and Auto Login should have addressed that issue.
Any insights welcome.
Thanks - Elton Hay

Hello Lakshmi,
>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.
Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.
So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?
Please let me know if my question is not clear.
>
<ul><li>
I got your point but in our case HTTP Server and Oracle Database (APEX) running on different machines.Did I missed something?
You should have mentioned this additional information in the original question itself.
</li>
<li>Oracle HTTP Server running on a Windows 2003 server and Oracle Database running on Sun Solaris machine.As long as [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#BHAFJJDA]dads.conf is configured correctly there should not be a problem with this.
From Original question:
We are having Oracle APEX 3.1 version on Oracle 10g Database and Oracle 10g HTTP Server as web server in our organization.How did this setup of APEX worked?(i.e. on different machines)
If you still have doubt about this you can do the setup and find out before upgrading.
</li>
<li>So do i need to change Oracle 10g HTTP Server? do i need to install Oracle 11g HTTP SErver?This question is answered in the above post. As long as you fulfill the [url http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/pre_require.htm#CFHIIJBE]HTTP Server Requirements for APEX 4.2 (Also we are discussing this long about only Oracle 10g HTTP Server but which version?)
</li></ul>
Hope now I am more clear!
Regards,
Kiran

Still cannot install the agent on Server 2012 R2 Core

Hi
I'm using the latest build of the agent (that I could find - 2.0.8692).
This KB http://support2.microsoft.com/kb/2997692/en-us says that 2.0.8689 and above should be supported on Windows Server 2012 R2 Core.
The installation works, but when I'm about to do the postsetup (Register Server Wizard) I get an unhandeld exception and cannot continue.
The error reads:
Creating an instance of the COM Component with CLSID {DC1C5A9C-E88A-4DDE-A5A1-60F82A20AEF7} from the IClassFactory failed due to the following error: 80040111 ClassFactory cannot supply requested class (Exception from HRESULT: 0x80040111 (CLASS_E_CLASSNOTAVAILABLE))

I am getting the same error, Hyper-V Server 2012R2
Full error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Runtime.InteropServices.COMException (0x80040111): Creating an instance of the COM component with CLSID {DC1C5A9C-E88A-4DDE-A5A1-60F82A20AEF7} from the IClassFactory failed due to the following error: 80040111 ClassFactory cannot supply requested class
(Exception from HRESULT: 0x80040111 (CLASS_E_CLASSNOTAVAILABLE)).
   at System.Windows.Forms.OpenFileDialog.CreateVistaDialog()
   at System.Windows.Forms.FileDialog.RunDialogVista(IntPtr hWndOwner)
   at System.Windows.Forms.CommonDialog.ShowDialog(IWin32Window owner)
   at Microsoft.Internal.CloudBackup.UI.Wizards.Activation.VaultCredentialBrowsePage.vaultCredentialBrowseButton_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34014 built by: FX45W81RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
PostSetup
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/PostSetup.exe
TraceWrapper
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/TraceWrapper.DLL
CBEngineServiceProxy
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBEngineServiceProxy.DLL
System.Runtime.Serialization
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34239 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
CBActivationWizard
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBActivationWizard.DLL
CBWizFx
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBWizFx.DLL
CBClientCommon
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBClientCommon.DLL
System.ServiceModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel/v4.0_4.0.0.0__b77a5c561934e089/System.ServiceModel.dll
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
CloudUtils
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CloudUtils.DLL
System.ServiceProcess
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceProcess/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
NativeMethods
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/NativeMethods.DLL
SMDiagnostics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.ServiceModel.Internals
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.33440 built by: FX45W81RTMREL
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.IdentityModel
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34230 built by: FX452RTMGDR
    CodeBase:
file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.IdentityModel/v4.0_4.0.0.0__b77a5c561934e089/System.IdentityModel.dll
CBCommonControls
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBCommonControls.DLL
CBUIErrorHandling
    Assembly Version: 1.0.523.0
    Win32 Version: 2.0.8692.0
    CodeBase:
file:///C:/Program%20Files/Microsoft%20Azure%20Recovery%20Services%20Agent/bin/CBUIErrorHandling.DLL
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Cannot Get Mail Connection to Server Failed

Ok, I am not a very good with setting things up but I have the itouch 16GB, I have managed to set up my email and am receiving new ones but I can not connect when I am away from my home, everytime I try to connect I get the following message, *Cannot get mail,The connection to the server "pop3.live.com" failed.* Can anyone help as to what I have done wrong or what I need to do to make this work. Many thanks

Tina,
You need a good WiFi connection first. You can get a WiFi signal, tell your touch to connect to the network (which it does) and still not be able to do anything - like check e-mail.
I've noticed that a lot of free hotspots here in the States make you go through a web page to "log on" to their networks. Even if it is free, you still have to go through this system.
Next time this happens, open Safari and touch one of your bookmarked pages. Chances are the network log on screen will pop up. Do whatever it asks, and that network will release your log on to begin working.

Can anyone please tell me why my 'Hotmail' account cannot get connected to its server on iOS 6?

Hi everyone,
I have just upgraded my iPad 2 to iOS 6. Everything is running perfectly well except for my emails. My primary email address is on Hotmail and the email app on my iPad is unable to connect itself to the server hence I cannot get any email. Which is really really frustrating and I have already missed a few important ones.
If someone can please kindly give me a solution, I have already tried mannually turning on the SMTP servers but that didn't work either. A timely response will be highly appreciated.
Thank you all.
Saadat Ali

There may be settings in the hotmail account that you need to change. I know I had to manually tell it to allow me to delete mails on the device, but even then I have to delete it on every device I use to access the account
http://windows.microsoft.com/en-US/hotmail/mobile
maybe info here can help you
I've received mail on my hotmail and I have iOS6, so I do think it's an issue with a specific device or account.

Cannot get NDES working on Server 2012 R2 at all.

Similar Messages

Maybe you are looking for