Cannot insert NULL in dimension_key

Hi,
I have created a dimension with a simple two-tier hierarchy. The upper Level shall be filled with a constant in the mapping as there is no real hierarchy in the source data yet. I use a surrogate key in the upper level dimension called ID. Implemetation is rolap.
In the mapping I use the dimension operator and fill the upper level with the constant and the lower level from the source data table.
Deployment is successfull, but when I start the mapping, I get ORA_1400 cannot insert NULL into ...dimension_key for every row.
The target afterwards contains of 1 record, where the lower level is completly NULL, the upper level is filled properly with the constant. The ID and the dimension_key have the same key inserted (e.g. -6).
From the Repository Browser trace, I can see that owb does not write anything to dimension_key and therefore the ora-1400 occurs for every row.
As I don't know what the intention and the supposed implementation of the dimension_key is, so I'm stuck here. How do I influence the cration of the dimension_key and are there any constraints in the setup of the dimension?
Thanks,
Knut

Right, my target is a dimension operator and a sequence is deployed. OWB does take this sequence for the surrogate ID and the dimension_key on the top level hierarchy.
But for the lower level hierarchy it does NOT take the dimension_key into the update statement.
In debug mode I see that it queries the dimension key but does not put it into the Lookup cursor for the update.
I think there is a relation missing between the different hierarchy levels, but I don't know how to implement it. Any ideas or references to the docs?
Reards,
Knut

Similar Messages

ORA-01400: cannot insert NULL into

hi to all
when i try to insert into a table i get an error message like
ORA-01400: cannot insert NULL into
but if i see in the session status i see that the value of the element that will be inserted on the column is not null
and i haven't make mistakes on my insert query so how can it be possible
can you help me please

What is the source used and the source type of your columns having trouble? Is it all not nullable columns on a table that are having problems? Are other columns inserting fine?
Can you post up on apex.oracle.com your app?
Do you want to send me your app and I can install it and look at the page in question?

Error when cloning a AD connector (cannot insert NULL into ("OIMUSER"."OIU"

I am getting below error when trying to clone AD connector (new resource). I Imported/Exported AD resource Object, Process form and the dependent lookup tables.
I can see the new resource object, process definition, process forms and Recon rule, when i tried provision a the new resource i see this error in logs.
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Importing ProcessAdministrator(XMLCREATED)
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Object is being created
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT], Creating data object
DEBUG,23 Dec 2010 02:34:45,788,[XELLERATE.DDM.IMPORT],Creating data object with params: com.thortech.xl.dataobj.tcDataBase@14d388c,41,null,[B@9355bd
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Resolving dependency to {UserGroup=SYSTEM ADMINISTRATORS}
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Dependency resolved with key: 1
DEBUG,23 Dec 2010 02:34:45,803,[XELLERATE.DDM.IMPORT], Saving data object
INFO,23 Dec 2010 02:34:46,256,[XELLERATE.DDM.STATS],Purging 6 prepared statements
ERROR,23 Dec 2010 02:35:52,663,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
     at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:159)
     at com.thortech.xl.dataaccess.tcDataBase.writePreparedStatement(Unknown Source)
     at com.thortech.xl.dataobj.PreparedStatementUtil.executeUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.insertImplementation(Unknown Source)
Please let me know if you have any idea..
Thanks..
Edited by: IDMuser19 on Dec 29, 2010 2:21 PM

After Setting Database to DEBUG mode i see below errors in the log
DEBUG,27 Dec 2010 16:26:44,850,[XELLERATE.DATABASE],select ost_launch_dependent, ost_key, ost_status from ost ost, obi obi where ost.obj_key=obi.obj_key and obi.obi_key=181
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select upp_deny_list from upp,usr where usr.usr_key=upp.usr_key and usr.usr_key=21
INFO,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],DB read: select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
DEBUG,27 Dec 2010 16:26:44,865,[XELLERATE.DATABASE],select pol_key, obi.obj_key from rqo,obi where rqo.obi_key = obi.obi_key and obi.obi_key = 181
INFO,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcOIU' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_pre_insert_sequence>0 order by dvt.dvt_pre_insert_sequence
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],insert into oiu (OIU_KEY, OBI_KEY, USR_KEY, OIU_SERVICEACCOUNT, OIU_CREATE, OIU_CREATEBY, OIU_UPDATE, OIU_UPDATEBY, oiu_rowver) values (?, ?, ?, ?, ?, ?, ?, ?, ?)
DEBUG,27 Dec 2010 16:26:44,881,[XELLERATE.DATABASE],select OIU_seq.nextval from dual
ERROR,27 Dec 2010 16:26:44,928,[XELLERATE.DATABASE],Class/Method: tcDataBase/writeStatement encounter some problems: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ("OIMUSER"."OIU"."OST_KEY")
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:85)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
INFO,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:44,990,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.SERVER],Class/Method: tcDataObj/save Error :Insertion of dataobject into database failed
INFO,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],DB read: select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
DEBUG,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],select err_key, err_code, err_desc, err_rowver, err_remedy, err_count, err_last_occurance, err_action, err_help_url, err_severity from err where err_code='DOBJ.INSERT_FAILED'
ERROR,27 Dec 2010 16:26:45,006,[XELLERATE.DATABASE],Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
Thanks .... Please reply if you have any idea..

Java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."DESCRIPTION"."TYPE")

insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('','','',41)
java.sql.SQLException: ORA-01400: cannot insert NULL into ("SYSTEM"."DESCRIPTION"."TYPE")
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:623)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:112)
at oracle.jdbc.driver.T4CStatement.execute_for_rows(T4CStatement.java:474)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1028)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1125)
at com.event.struts.InsertDetails.doPost(InsertDetails.java:78)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Unknown Source
and i my
Action class is
public class InsertDetails extends HttpServlet{
protected void doPost(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
// TODO Auto-generated method stub
Connection conn = null;
try{
List list = (List) req.getSession().getAttribute("listbean");
InputBean ib = (InputBean) list.get(0);
InputBean ib1 = (InputBean) list.get(1);
InputBean ib2 = (InputBean) list.get(2);
InputBean ib3 = (InputBean) list.get(3);
InputBean ib4 = (InputBean) list.get(4);
InputBean ib5 = (InputBean) list.get(5);
InputBean ib6 = (InputBean) list.get(6);
InputBean ib7 = (InputBean) list.get(7);
conn = ConnectionUtils.getConnection();
Statement stmt = conn.createStatement();
String sql1 = "select seq.nextval from DUAL";
ResultSet rs1 = stmt.executeQuery(sql1);
rs1.next();
int event_id = rs1.getInt(1);
//Advanced and general info
String sql2 = "insert into EVENT_INFO (EVENT_ID,EVENT_NAME,SHORT_NAME,EVENT_START_DATE,EVENT_END_DATE,EVENT_START_TIME,EVENT_END_TIME,event_LOCATION,ADDRESS1,ADDRESS2,CITY,STATE,ZIP_CODE,COUNTRY,event_COMMENT,EVENT_OVERVIEW,EXTRA1,EXTRA2,MEMBERSHIP_OPTION,EXTRA3,EXTRA4,EXTRA5,KID,TEEN,ADULT,SENIOR,SENILE,EVENT_TYPE1,EVENT_TYPE2,DETAILED_DESCRIPTION,IS_DETAILED_DESCRIPTION_HTML,ADDITIONAL_URL,BYPASS_INFORMATION_PAGE,CANCELLATION_POLICY,ADDTIONAL_INFO) values("+event_id+",'"+ib.getName()+"','"+ib.getShortname()+"','"+ib.getStartdate()+
"','"+ib.getEnddate()+"','"+ib.getStarttime()+"','"+ib.getEndtime()+"','"+ib.getLocation()+"','"+ib.getAddress1()+"','"+ib.getAddress2()+"','"+
ib.getCity()+"','"+ib.getState()+"','"+ib.getZip()+"','"+ib.getCountry()+"','"+ib.getComment()+"','"+ib.getTextarea()+"','"+ib.getExtra1()+"','"+
ib.getExtra2()+"','"+ib.getExtra3()+"','"+ib.getExtra4()+"','"+ib.getExtra5()+"','"+ib.getExtra6()+"','"+ib.getExtra7()+"','"+ib.getExtra8()+"','"+
ib.getExtra9()+"','"+ib.getExtra10()+"','"+ib.getExtra11()+"','"+ib.getExtra12()+"','"+ib.getExtra13()+"','"+ib1.getTextarea()+"','"+ib1.getExtra1()+"','"+
ib1.getName()+"','"+ib1.getExtra2()+"','"+ib2.getCancellation_policy()+"','"+ib2.getTextarea()+"')";
stmt.executeQuery(sql2);
//Description
List list1 = (List) ib2.getList();
DescriptionBean db = (DescriptionBean) list1.get(0);
DescriptionBean db1 = (DescriptionBean) list1.get(1);
DescriptionBean db2 = (DescriptionBean) list1.get(2);
DescriptionBean db3 = (DescriptionBean) list1.get(3);
DescriptionBean db4 = (DescriptionBean) list1.get(4);
DescriptionBean db5 = (DescriptionBean) list1.get(5);
DescriptionBean db6 = (DescriptionBean) list1.get(6);
if(db.getDescription()!=" "){
String s1 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db.getDescription()+"','"+db.getTextarea()+"','"+db.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s1);
if(db1.getDescription()!=" "){
String s2 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db1.getDescription()+"','"+db1.getTextarea()+"','"+db1.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s2);
if(db2.getDescription()!=" "){
String s3 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db2.getDescription()+"','"+db2.getTextarea()+"','"+db2.getHtmlbutton()+"',"+event_id+")";
System.out.println(s3);
stmt.executeQuery(s3);
if(db3.getDescription()!=" "){
String s4 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db3.getDescription()+"','"+db3.getTextarea()+"','"+db3.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s4);
if(db4.getDescription()!=" "){
String s5 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db4.getDescription()+"','"+db4.getTextarea()+"','"+db4.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s5);
if(db5.getDescription()!=" "){
String s6 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db5.getDescription()+"','"+db5.getTextarea()+"','"+db5.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s6);
if(db6.getDescription()!=" "){
String s7 = "insert into DESCRIPTION (TYPE,DESCRIPTION,IS_HTML,EVENT_ID) values('"+db6.getDescription()+"','"+db6.getTextarea()+"','"+db6.getHtmlbutton()+"',"+event_id+")";
stmt.executeQuery(s7);
//Activity
String sql3 = "insert into ACTIVITY (ACTIVITY_NAME,ACTIVITY_START_DATE,ACTIVITY_END_DATE,ACTIVITY_START_TIME,ACTIVITY_END_TIME,TYPE,CAPACITY,EVENT_ID) values('"+ib3.getName()+"','"+ib3.getStartdate()+"','"+
ib3.getEnddate()+"','"+ib3.getStarttime()+"','"+ib.getEndtime()+"','"+ib3.getExtra1()+"',"+event_id+")";
stmt.executeQuery(sql3);
i put condition for null .But if i dont fill the fields,even then the executeQuery is executing without checking the condition.
wht is the problem
what i want to change in my code.

1. Use code tags when you post code.
2. Use prepared statements.
3. If you have a field that requires a non-null entry then you must provide a non-null value. And for Oracle that means non-empty as well.

Autconfig error : ORA-01400: cannot insert NULL into ("APPLSYS"."FND_NODES"."NODE_NAME")

Good day,
I am running EBS 11.5.10 with DB 10.2.0.4. I applied patch 7429271 following the steps in Doc Id. 233044.1.
After restarting the application, I got a "node id does not exist for the current application" when the forms started.
After purging fnd nodes (exec fnd_conc_clone.setup_clean) I ran autoconfig successfully on the dbtier but got the error below in the apps tier.
I also noticed that the contents of my dbc file has been erased and replaced with the template data (all values are default). I tried restoring it but it just got over written again with default data.
Hope my explanation was clear enough.
Any suggestions?
---error from adconfig.log-----------
Unique constraint error (00001) is OK if key already exists
java.sql.SQLException: ORA-01400: cannot insert NULL into ("APPLSYS"."FND_NODES"."NODE_NAME")
ORA-06512: at "APPS.FND_CONCURRENT", line 1504
ORA-06512: at "APPS.FND_APP_SERVER_PKG", line 163
ORA-06512: at line 1
- Database error modifying the server

Logs after autoconfig and services started - not connection attempted to the application yet.
-----access log--------
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16000 HTTP/1.1" 200 15 0
----error log--------
[Fri Oct 25 13:28:59 2013] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
----error log_pls----
[Fri Oct 25 13:29:00 2013] [notice] Oracle HTTP Server Powered by Apache/1.3.19 configured -- resuming normal operations
Logs after a connection attempt to the application
-----access log-----
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=XmlSvcsGrp&port=19000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=DiscoGroup&port=17000 HTTP/1.1" 200 15 0
mobay.pahq.dom - - [25/Oct/2013:13:28:59 -0500] "GET /oprocmgr-service?cmd=Register&index=0&modName=JServ&grpName=OACoreGroup&port=16000 HTTP/1.1" 200 15 0
192.168.50.80 - - [25/Oct/2013:13:34:32 -0500] "GET / HTTP/1.1" 200 2589 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /apptitle.html HTTP/1.1" 200 1015 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /applist.html HTTP/1.1" 200 1602 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /appdet.html HTTP/1.1" 200 1009 0
192.168.50.80 - - [25/Oct/2013:13:34:33 -0500] "GET /appsmed3.gif HTTP/1.1" 200 1981 0
192.168.50.80 - - [25/Oct/2013:13:34:36 -0500] "GET /aplogon.html HTTP/1.1" 200 1953 0
192.168.50.80 - - [25/Oct/2013:13:34:38 -0500] "GET /OA_HTML/US/ICXINDEX_PROD_mobay.htm HTTP/1.1" 200 417 0
192.168.50.80 - - [25/Oct/2013:13:34:38 -0500] "GET /OA_HTML/AppsLocalLogin.jsp HTTP/1.1" 200 411 0
**the error logs remain unchanged.
Regards,
Shridath.

Migration Error - Cannot Insert Null Into MD_PROJECTS.ID

Environment:
Oracle 11g (11.2.0.2)
SQL Server 2008 R2
SQL Developer 3.0.03 Build Main-03.97
Problem:
We are migrating a SQL Server DB to Oracle and will need to perform this repeated times using updated versions of the SQL Server DB. I successfully did this several days ago using OFFLINE mode using a DB received in late March. There are two schemas in the SQL Server DB (dbo and EXA) that need to get migrated. Within SQL Server I attached the DB and renamed it to PTS. I then went through the wizard and ended up with two schemas in Oracle (dbo_PTS and EXA_PTS). I am now trying to repeat the process with a DB I just received. Within SQL Server I attached the DB and renamed it to PTS_April. It also has the same two schemas (dbo and EXA).
My repository schema (MWREP) has the following permissions:
GRANT RESOURCE TO MWREP WITH ADMIN OPTION;
GRANT DBA TO MWREP;
GRANT CONNECT TO MWREP;
ALTER USER MWREP DEFAULT ROLE ALL;
-- 6 System Privileges for MWREP
GRANT UNLIMITED TABLESPACE TO MWREP WITH ADMIN OPTION;
GRANT CREATE SESSION TO MWREP;
GRANT CREATE ROLE TO MWREP WITH ADMIN OPTION;
GRANT ALTER ANY TRIGGER TO MWREP WITH ADMIN OPTION;
GRANT CREATE USER TO MWREP WITH ADMIN OPTION;
GRANT CREATE VIEW TO MWREP;
I step through the wizard with the following general parameters
1) MWREP connection as the repository - I have dropped and recreated the repository objects.
2) Offline Mode for the Source Database (I've successfully created the .ocp file)
3) PTS_April selected in the Capture page
4) Offline Mode for the Target Database
5) Offline Mode for the Move Data
6) Click Finish and it runs for about 30 seconds first saying Create Project and then saying Capture.
I then get the following error message:
Migration actions have failed. Check the migration report for details. : ORA-01400: cannot insert NULL into ("MWREP"."MD_PROJECTS"."ID")
Any assitance solving this problem are appreciated.

Hi, I had exactly the same problem and I resolved it be dropping all objects associated with the migration, this involves packages, types, views etc. Once I had ensured that i had a blank canvas, i stated again and it worked succesfully, good luck, Matt

Impdp errors with ORA-01400: cannot insert NULL into

Hi Experts,
I have very intresting situation when I use impdp to import table back to DB.
Environment:
Database Server: 10.2.0.4 Enterprise
OS: RHEL 5.5 64-bit
We have a table and it's size is 350+ GB and so to reclaim space I want to perform expdp/impdp operation. When I following below steps:
1) expdp table
2) drop table
3) impdp full table
It works like a charm and I am able to reclaim 83% space and table size shows about 20GB.
But when I follow below method:
1) expdp table
2) truncate table (To save some time not to import indexes, stats, constraints , etc)
3) impdp table
I get following error:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_TABLE_01" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_TABLE_01": sys/******** tables=<schema>.<table_name> directory=test_dir dumpfile=<table_name>_%u.dmp logfile=impdp_<table_name>.log parallel=16 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "<schema"."table_name" failed to load/unload and is being skipped due to error:
ORA-01400: cannot insert NULL into ("schema"."table_name"."ID")
Job "SYS"."SYS_IMPORT_TABLE_01" completed with 1 error(s) at 16:12:28
Please advise how to proceed further, it seems like I am hitting some sort of Bug but metalink does not show any.
Regards,
MS
Edited by: user10651321 on Nov 9, 2012 4:38 PM

expdp and impdp operations should not be executed as SYS - try SYSTEM account instead. See first Note section here - http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_import.htm#sthref243
Pl post the complete expdp and impdp commands used, along with a description of the table for which you encounter this error.
HTH
Srini

Cannot insert null into a Primary Key Column using Entity Framework

I have to insert data into UserPreferences Table which has a primary key. This I am doing with Oracle Entity Framework Provider.
It is unable to do it though i have set the StoreGeneratedPattern = "Identity". But while saving changes it is saying a null error is being inserted into the primary key.

I exported the same package to BIDS and ran it but still unable to get the issue. It is running fine.
Also then same package is running fine in other environments.
Thanks
Thats strange
Are you pointing to same databases itself while executing from server?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Error in Executing procedure--Cannot inser null

when i execute a procedure . i am getting the following error.
Where to write an exection. Please let me know whether i have to write exection after insert or..
Please help me.
my procedure is as follows
insert into a as select * from b;
ORA-01400: cannot insert NULL into ("ETL"."A.EXP_CD")
ORA-06512: at "ETL.P_STGE_MATTER", line 167
ORA-06512: at line 11

if you are using the same insert statement that you
have mentioned then i think it should be like
insert into a (select * from b)Really ?
SQL> create table a (id number(1))
2 /
Tabel is aangemaakt.
SQL> create table b as select 1 id from dual
2 /
Tabel is aangemaakt.
SQL> insert into a select * from b
2 /
1 rij is aangemaakt.Regards,
Rob.

SharePoint List Form using InfoPath 2010 "Cannot insert the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls"

I am experiencing issue with my SharePoint site , when I am trying to add new Item in List . Error given below :--> 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 SharePoint Server Logging Correlation Data 9gc5 Verbose Thread change; resetting trace
level override to 0; resetting correlation to e2e9cddc-cf35-4bf8-b4f3-021dc91642da c66c2c17-faaf-4ff9-a414-303aa4b4726b e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.13 w3wp.exe (0x2E04) 0x07E8 Document Management Server Document Management 52od
Medium MetadataNavigationContext Page_InitComplete: No XsltListViewWebPart was found on this page[/sites/00003/Lists/PM%20Project%20Status/NewForm.aspx?RootFolder=&IsDlg=1]. Hiding key filters and downgrading tree functionality to legacy ListViewWebPart(v3)
level for this list. e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015 08:23:36.17 w3wp.exe (0x1B94) 0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Starting correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.17 w3wp.exe (0x1B94)
0x1A0C SharePoint Server Logging Correlation Data 77a3 Verbose Ending correlation. b4d14aec-5bd4-4fb1-b1e3-589ba337b111 02/03/2015 08:23:36.31 w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High System.Data.SqlClient.SqlException: Cannot insert
the value NULL into column 'tp_DocId', table 'Content_SP_00003.dbo.AllUserData'; column does not allow nulls. INSERT fails. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavi... e2e9cddc-cf35-4bf8-b4f3-021dc91642da 02/03/2015
08:23:36.31* w3wp.exe (0x2E04) 0x07E8 SharePoint Foundation Database 880i High ...or runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
command, CommandBehavior behavior,

Are you trying to setup P2P? Could you explain the process you followed completely? By anychance you create the backup and then created the publication?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

Error occurred in deployment step 'add solution' value cannot be null Parameter name: g

Hi!
I have a SharePoint Server 2013 with latest updates. Worflow Manager 1.0 installed and configured correctly. The server has a website, site temblate is Reacods Center. This site is default. On the site I created a blank Document library "TestLib"
If I create workflow in SharePoint Designer 2013, workflow works normally. Workflow set Title of element to "MyCustomTitle" and Write to History string "Done!".
If I create Empty Solution in Visual Studio 2013, insert into solution Workflow and make same actions, my solution at deployment step fails with error:
"error occurred in deployment step 'add solution' value cannot be null Parameter name: g"
Please, help me to resolve this problem?
Thanks!

Hi,
What if stop this service, then start it again, perform an iisreset? It will make the change applied to the whole farm.
Also, you can check the ULS logs to see if there is any unexpected error occurs when deploying this solution.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Exception: Error decoding message (Key cannot be null)

Hi guys,
     Coherence 3.3.1/389
     .Net API 3.3.1.2
     I've wrote small invocation task, which collects the info about cluster members, stores it to HashMap and return it as result. This is the code:
     NamedCache cache = CacheFactory.getCache(sCacheName);
     CacheService service = cache.getCacheService();
     Cluster cluster = service.getCluster();
     HashMap res = new HashMap();
     Set members = cluster.getMemberSet();
     Iterator iter = members.iterator();
     while(iter.hasNext())
     Member member = (Member)iter.next();
     res.put((Object)member.getProcessName(), new Integer(member.getPort()));
     As you can see if member.getProcessName() returns null, then null is placed to HashMap.
     When the result was returned to the client, I've got this exception:
     2007-10-04 09:55:45.849 <Error> (thread=Tangosol.Net.Messaging.Impl.ConnectionManager+ConnectionManagerDaemon): Error decoding message
     System.ArgumentNullException: Key cannot be null.
     Parameter name: key
     at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
     at System.Collections.Hashtable.set_Item(Object key, Object value)
     at Tangosol.IO.Pof.PofStreamReader.ReadAsObject(Int32 typeId) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\IO\Pof\PofStreamReader.cs:line 3446
     at Tangosol.IO.Pof.PofStreamReader.ReadObject(Int32 index) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\IO\Pof\PofStreamReader.cs:line 2284
     at Tangosol.Net.Messaging.Impl.Response.ReadExternal(IPofReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Response.cs:line 117
     at Tangosol.Net.Messaging.Impl.Codec.Decode(IChannel channel, DataReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Codec.cs:line 118
     at Tangosol.Net.Messaging.Impl.Connection.DecodeMessage(DataReader reader) in c:\dev\release.net\coherence-net-v3.3\src\Coherence\Net\Messaging\Impl\Connection.cs:line 874
     I understood why it was happened, but I did not understood why it was masked and my client application was frozen until request time accured (180s).
     Why did you mask it?
     Regards,
     Dmitry.

Hi
Thanks for answered.
I tried to import just 6 lines but the same error.
Did you know, what could be?
I am pasting the log.
TOTAL STEPS 2
1. Convert Data:         completed in 1 sec.
2. Load and Process:     Failed in 1 sec.
3. Import:               completed in 1 sec.
[Selection]
FILE=\GrupoPit\FRATECO\DataManager\DataFiles
41010100001.csv
TRANSFORMATION=\GrupoPit\FRATECO\DataManager\TransformationFiles
Frateco.xls
CLEARDATA= Yes
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Convert Data
Success
Record Count : 6
Accept Count : 6
Reject Count : 0
Skip Count   : 0
Key cannot be null.
Parameter name: key

"java.sql.SQLException: The url cannot be null"

Hi,
I started to use the torque in my last project but when I try to insert new data to the db(i am using MySQL) I get the following error "java.sql.SQLException: The url cannot be null".
Is that error familiar to anybody ?
Regards
RCY

Hi,
Sorry for the lack of info.
1) This is my Torque.properties :
# T O R Q U E P R O P E R T I E S
#Torque has the ability to use multiple databases. This property
#specifies which database is to be used as the default
torque.database.default=rcy
# Torque has the ability to deal with multiple database systems.
# This property specifies the database adapter to use.
torque.database.rcy.adapter=mysql
#torque.database.jd.rcy=mysql
# The factory class that will be used to provide database connections.
torque.dsfactory.rcy.factory=org.apache.torque.dsfactory.SharedPoolDataSourceFactory
#torque.dsfactory.rcy.factory=org.apache.torque.dsfactory.TorqueDataSourceFactory
# The JDBC database driver to use when connecting to your database.
torque.dsfactory.rcy.connection.driver org.gjt.mm.mysql.Driver
# The URL that will be used to access your database. Torque's generated
# object model will perform all database operations using this URL.
# This value should reflect the database name specified in your database schema file
#torque.dsfactory.rcy.connection.url jdbc\:mysql\://localhost\:3306/rcy
torque.dsfactory.rcy.connection.url jdbc\:mysql\://127.0.0.1\:3306/rcy
#torque.dsfactory.rcy.connection.user user
#torque.dsfactory.rcy.connection.password password
torque.dsfactory.rcy.connection.user chen
torque.dsfactory.rcy.connection.password 1qazI created the db with torque and then copied the file(Torque.properties ) to my project.
2) This is my build.properties file :
# T O R Q U E C O N F I G U R A T I O N F I L E
# This file contains the most commonly used properties. For a
# a complete list of build properties, please refer to:
#   http://jakarta.apache.org/turbine/torque/properties-reference.xml
# P R O J E C T
# This is the name of your Torque project. Your non-Java generated
# files will be named using the project name selected below. If your
# project=killerapp then you will have a generated:
#   killerapp-schema.sql
# The custom is then to also rename your project XML schema from
# project-schema.xml to killerapp-schema.xml. This is required
# for a few targets such as datasql, datadump, and datadtd.
torque.project = rcy
# T A R G E T D A T A B A S E
# This is the target database, only considered when generating
# the SQL for your Torque project. Your possible choices are:
#   axion, cloudscape, db2, db2400, hypersonic, interbase, mssql,
#   mysql, oracle, postgresql, sapdb, sybase
torque.database = mysql
# O B J E C T M O D E L I N F O R M A T I O N
# These settings will allow you to customize the way your
# Peer-based object model is created.
# addGetByNameMethod
#   If true, Torque adds methods to get database fields by name/position.
# addIntakeRetrievable
#   If true, the data objects will implement Intake's Retrievable
#   interface
# addSaveMethod
#   If true, Torque adds tracking code to determine how to save objects.
# addTimeStamp
#   If true, Torque true puts time stamps in generated om files.
# basePrefix
#   A string to pre-pend to the file names of base data and peer objects.
# complexObjectModel
#   If true, Torque generates data objects with collection support and
#   methods to easily retreive foreign key relationships.
# targetPackage
#   Sets the Java package the om files will generated to, e.g.
#   "com.company.project.om".
# useClasspath
#   If true, Torque will not look in the <code>templatePath</code> directory,
#   for templates, but instead load them from the classpath, allowing you to
#   use Torque without extracted it from the jar.
# useManagers
#   If true, Torque will generate Manager classes that use JCS for caching.
#   Still considered experimental.
torque.targetPackage = com.base
torque.addGetByNameMethod = true
torque.addIntakeRetrievable = false
torque.addSaveMethod = true
torque.addTimeStamp = true
torque.basePrefix = Base
torque.complexObjectModel = true
torque.useClasspath = false
torque.useManagers = false
# D A T A B A S E S E T T I N G S
# JDBC connection settings. This is used by the JDBCToXML task that
# will create an XML database schema from JDBC metadata. These
# settings are also used by the SQL Ant task to initialize your
# Torque system with the generated SQL.
# sameJavaName
#   If true, the JDBC task will set the javaName attribute for the tables
#   and columns to be the same as SQL name.
torque.database.createUrl = jdbc:mysql://127.0.0.1/mysql
torque.database.buildUrl = jdbc:mysql://127.0.0.1/rcy
torque.database.url = jdbc:mysql://127.0.0.1/rcy
torque.database.driver = org.gjt.mm.mysql.Driver
torque.database.user = chen
torque.database.password = 1qaz
torque.database.host = 127.0.0.1
torque.sameJavaName = falseI hope that will help you to help me :)
Thank's

Cannot insert duplicate key row in object

This is a JPA question. The tbHardware table has a PK identity column and a unique non-clustered index on CoxBarcode column.
I have a SFSB in a Seam2.0.0.GA app running on JBoss 4.2.1.GA. I am using flushMode=FlushModeType.MANUAL (Seam specific when beginning a conversation) and that's why you see the flush() reference at the end of the following code snippet.
Query query = entityManager.createNativeQuery("INSERT INTO tbHardware "+
                                             "VALUES (:coxBarCode, :serialNo, :currentStatus, :currentLocationNo, "+
                                             ":desc, :hardwareModelId, :ownerTypeCode, :firstEnteredDate, :enteredByUser, :lastAuditDate, :hardwarePrice, null)")
                                          .setParameter("coxBarCode", coxBarcode)
                                          .setParameter("serialNo", serialNo)
                                          .setParameter("currentStatus", curstatus)
                                          .setParameter("currentLocationNo", curloc)
                                          .setParameter("desc", desc)
                                          .setParameter("hardwareModelId", selmodid)
                                          .setParameter("ownerTypeCode", selectedOwner)
                                          .setParameter("firstEnteredDate", firstEnteredDate)
                                          .setParameter("enteredByUser", enteredByUser)
                                          .setParameter("lastAuditDate", lastAuditedDate)
                                          .setParameter("hardwarePrice", unitPrice);
                         query.executeUpdate();
                         query = entityManager.createNativeQuery("INSERT INTO TbHardwareHistory "+
                                        "VALUES (:hardwareId, :currentStatus, :currentLocationNo, :firstEnteredDate, null, :enteredByUser, :ownerTypeCode)")
                                         .setParameter("hardwareId", findHardwareId(coxBarcode))
                                         .setParameter("currentStatus", curstatus)
                                         .setParameter("currentLocationNo", curloc)
                                         .setParameter("firstEnteredDate", firstEnteredDate)
                                         .setParameter("enteredByUser", enteredByUser)
                                         .setParameter("ownerTypeCode", selectedOwner);
                         query.executeUpdate();
                         //TO DO: following query should return only one entity, need to refactor and remove the for loop below
                         TbHardware hw = (TbHardware)entityManager.createNativeQuery("SELECT t FROM tbHardware t WHERE t.coxBarCode = :coxBarCode AND t.serialNo = :serialNo", TbHardware.class)
                                                                                .setParameter("coxBarCode", coxBarcode)
                                                                                .setParameter("serialNo", serialNo)
                                                                                .getSingleResult();
                         Integer hardwareId = hw.getHardwareId();
                         query = entityManager.createNativeQuery("INSERT INTO tbHardwareNote VALUES (:hardwareId, :hardwareNote)")
                                               .setParameter("hardwareId", hardwareId).setParameter("hardwareNote", hardwareNote);
                         query.executeUpdate();
                         entityManager.flush();I am getting the following in the server.log:
10:10:57,552 ERROR [STDERR] Caused by: org.hibernate.exception.SQLGrammarException: could not execute native bulk manipulation query
10:10:57,552 ERROR [STDERR]      at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:67)
10:10:57,552 ERROR [STDERR]      at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
10:10:57,552 ERROR [STDERR]      at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:174)
10:10:57,552 ERROR [STDERR]      at org.hibernate.impl.SessionImpl.executeNativeUpdate(SessionImpl.java:1163)
10:10:57,552 ERROR [STDERR]      at org.hibernate.impl.SQLQueryImpl.executeUpdate(SQLQueryImpl.java:334)
10:10:57,552 ERROR [STDERR]      at org.hibernate.ejb.QueryImpl.executeUpdate(QueryImpl.java:48)
10:10:57,552 ERROR [STDERR]      ... 138 more
10:10:57,552 ERROR [STDERR] Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot insert duplicate key row in object 'dbo.tbHardware' with unique index 'IX_tbHardwar_coxBarCode_UNIQUE'.
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PrepStmtExecCmd.doExecute(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source)
10:10:57,552 ERROR [STDERR]      at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeUpdate(Unknown Source)
10:10:57,552 ERROR [STDERR]      at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeUpdate(WrappedPreparedStatement.java:251)
10:10:57,552 ERROR [STDERR]      at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:165)
10:10:57,552 ERROR [STDERR]      ... 141 moreHow should I handle this SQLServerException? What is the best practice regarding this from a JPA perspective? I thought about executing a select query prior to the insert in tbHardware to check to see if a record with that particular coxBarCode exists or not. Would the exception be handled differently if I used the persist() method instead of the createNativeQuery() and executeUpdate() combination? thx.
Edited by: asookazian on May 7, 2008 11:07 AM

kajbj wrote:
What do you mean by control? Yes, you can find duplicates and remove them (by e.g. implementing a Comparator and adding them to a Set)
KajI mean to say replace the duplication with just a single value for insert!
Any psuedo for the comparactor suggested?

Cannot insert NULL in dimension_key

Similar Messages

Maybe you are looking for