Cannot Install ADWS on server 2003 Standard SP2

running server 2003 SP2 - Extended my schema to 2008 no problems. Installed latest RSAT on a windows 7 domain client, cannot connect due to no ADWS service running on my DC.
I attempted to install the ADWS service and received an error at the point where my netlogon was too low a version.
After researching I found the hotfix for just this issue (KB969428) and installed the hot fix.
ADWS (KB968934) fails again - this time it succeeds all prerequisite checks (passing netlogon) up to prerequisite check for System.DirectoryServices.AccountManagement
After looking in to this, it appears to be looking for a .net component that is newer than 3.5 SP1 - Should I install Beta 4 of .net to resolve this? If so, what are the ramifications of having to uninstall and reinstall .net when v4 final is released? if not, how else can I resolve this issue?
Below is my KB968934.log - I left the first section in to show where it failed at netlogon, scroll down and you will see netlogon pass the prerequisite check and where my next failure occurs. Thank you in advance for any help you can provide.
[KB968934.log]
0.651: ================================================================================
0.651: 2010/01/16 17:37:13.060 (local)
0.651: d:\0d7eebb766afefb1aedf7c46cb11\update\update.exe (version 6.3.15.0)
0.681: Hotfix started with following command line:
0.732: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
1.002: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
1.002: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
1.002: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
1.062: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
1.072: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
1.072: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
1.092: C:\WINDOWS\system32\netlogon.dll is Present
1.162: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
1.162: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
1.162: Condition Check for Line 3 of PreRequisite returned FALSE
1.182: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1.182: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
1.242: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1.242: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
106.604: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
106.604: User Input: OK
106.604: Update.exe extended error code = 0xf0f4
106.604: Update.exe return code was masked to 0x643 for MSI custom action compliance.
3.675: ================================================================================
3.675: 2010/01/16 18:03:18.466 (local)
3.685: d:\2f8814c6dfbec22952bc64751eaa77a2\update\update.exe (version 6.3.15.0)
3.775: Hotfix started with following command line:
6.169: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
6.920: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
6.920: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
6.920: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
6.940: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
6.950: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
6.950: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
6.950: C:\WINDOWS\system32\netlogon.dll is Present
7.080: FileVersion of C:\WINDOWS\system32\netlogon.dll is Greater or Equal To 5.2.3790.4482
7.080: Condition succeeded for section Prereq.CheckDCLocatorQFEInstalled.Section in Line 3 of PreRequisite
7.390: C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Present
8.342: FileVersion of C:\WINDOWS\Assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\3.5.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll is Less Than 3.5.30729.4126
8.342: Second Condition in Prereq.CheckSDSAMQFEInstalled.Section Failed
8.342: Condition Check for Line 4 of PreRequisite returned FALSE
8.352: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
8.352: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
8.422: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
8.422: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
16.143: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
16.143: User Input: OK
16.143: Update.exe extended error code = 0xf0f4
16.143: Update.exe return code was masked to 0x643 for MSI custom action compliance.

I am having the same issue and have installed the hotfix KB969166. Here is the copy of the error log I get when attempting to install AWGS:
[KB968934.log]
0.078: ================================================================================
0.078: 2010/02/02 10:26:49.836 (local)
0.094: c:\251d1d890dd68535c298af3983c1\update\update.exe (version 6.3.15.0)
0.094: Hotfix started with following command line:
0.109: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.141: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.141: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.141: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.141: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is not Present
0.141: Fist Condition in Prereq.CheckCLR.Section Failed
0.141: Condition Check for Line 2 of PreRequisite returned FALSE
0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.156: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.641: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.641: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
90.641: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
90.641: User Input: OK
90.641: Update.exe extended error code = 0xf0f4
90.641: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.062: ================================================================================
0.062: 2010/02/05 08:58:44.500 (local)
0.062: c:\4ed2570295ca716c726b4919c4ae0f\update\update.exe (version 6.3.15.0)
0.062: Hotfix started with following command line:
0.062: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.109: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.109: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.109: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.109: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.109: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Less Than Specified Value
0.109: Second Condition in Prereq.CheckCLR.Section Failed
0.109: Condition Check for Line 2 of PreRequisite returned FALSE
0.109: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.109: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.125: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.765: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.765: User Input: OK
7.765: Update.exe extended error code = 0xf0f4
7.765: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.031: ================================================================================
0.031: 2010/02/05 09:02:02.890 (local)
0.031: c:\d14fbec512d08ab27235\update\update.exe (version 6.3.15.0)
0.031: Hotfix started with following command line:
0.031: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.046: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.046: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.046: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.046: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.046: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Less Than Specified Value
0.046: Second Condition in Prereq.CheckCLR.Section Failed
0.046: Condition Check for Line 2 of PreRequisite returned FALSE
0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.062: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.062: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.062: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
28.750: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
28.750: User Input: OK
28.750: Update.exe extended error code = 0xf0f4
28.750: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.078: ================================================================================
0.078: 2010/02/05 09:44:56.662 (local)
0.078: c:\97a3532a3827cc7ab96ab9d0ef3f309c\update\update.exe (version 6.3.15.0)
0.094: Hotfix started with following command line:
0.094: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.125: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.125: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.125: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.125: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.125: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.125: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.125: C:\WINDOWS\system32\netlogon.dll is Present
0.125: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
0.125: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
0.125: Condition Check for Line 3 of PreRequisite returned FALSE
0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.141: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.141: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.141: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
9.359: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
9.359: User Input: OK
9.359: Update.exe extended error code = 0xf0f4
9.359: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.078: ================================================================================
0.093: 2010/02/05 10:11:17.921 (local)
0.093: c:\3c8ed213a8530cc14dca7e3062\update\update.exe (version 6.3.15.0)
0.109: Hotfix started with following command line:
0.109: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.156: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.156: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.156: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.156: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.156: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.156: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.156: C:\WINDOWS\system32\netlogon.dll is Present
0.156: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
0.156: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
0.156: Condition Check for Line 3 of PreRequisite returned FALSE
0.156: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.156: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.672: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.672: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.218: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.218: User Input: OK
7.218: Update.exe extended error code = 0xf0f4
7.218: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.047: ================================================================================
0.047: 2010/02/05 10:18:38.833 (local)
0.047: c:\fc3b5f814b77142ca5cddbd3df\update\update.exe (version 6.3.15.0)
0.047: Hotfix started with following command line:
0.047: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.062: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.062: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.062: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.062: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.078: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.078: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.078: C:\WINDOWS\system32\netlogon.dll is Present
0.078: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
0.078: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
0.078: Condition Check for Line 3 of PreRequisite returned FALSE
0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.078: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.078: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.078: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.625: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
3.625: User Input: OK
3.625: Update.exe extended error code = 0xf0f4
3.625: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.079: ================================================================================
0.079: 2010/02/05 10:26:57.505 (local)
0.079: c:\abb2d8d70e100e3b9b48951c\update\update.exe (version 6.3.15.0)
0.079: Hotfix started with following command line:
0.079: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.110: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.110: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.110: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.110: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.110: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.110: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.110: C:\WINDOWS\system32\netlogon.dll is Present
0.110: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
0.110: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
0.110: Condition Check for Line 3 of PreRequisite returned FALSE
0.110: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.110: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.125: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.125: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.625: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
7.625: User Input: OK
7.625: Update.exe extended error code = 0xf0f4
7.625: Update.exe return code was masked to 0x643 for MSI custom action compliance.
0.078: ================================================================================
0.093: 2010/02/05 10:35:00.550 (local)
0.093: c:\e789906fc99235197987dcd4b2ab3dc5\update\update.exe (version 6.3.15.0)
0.093: Hotfix started with following command line:
0.093: In Function GetReleaseSet, line 1193, RegQueryValueEx failed with error 0x2
0.140: SYSTEM\CurrentControlSet\Control\ProductOptions\ProductType is Equal To Specified Value
0.140: First Condition in Prereq.CheckIfAnyInstanceRunning.Section Succeeded
0.140: Condition succeeded for section Prereq.CheckIfAnyInstanceRunning.Section in Line 1 of PreRequisite
0.140: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5 is Present
0.140: SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5\SP is Greater or Equal To Specified Value
0.140: Condition succeeded for section Prereq.CheckCLR.Section in Line 2 of PreRequisite
0.140: C:\WINDOWS\system32\netlogon.dll is Present
0.140: FileVersion of C:\WINDOWS\system32\netlogon.dll is Less Than 5.2.3790.4482
0.140: Second Condition in Prereq.CheckDCLocatorQFEInstalled.Section Failed
0.140: Condition Check for Line 3 of PreRequisite returned FALSE
0.140: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.140: KB968934 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
0.640: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.640: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
12.093: Message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB968934 failed. For More details check the Log File c:\windows\KB968934.log
12.093: User Input: OK
12.093: Update.exe extended error code = 0xf0f4
12.093: Update.exe return code was masked to 0x643 for MSI custom action compliance.

Similar Messages

Can JDK1.3.1_16 be installed on Microsoft Server 2003, Standard Edition?

Hello,
I installed SDK1.3.1 update 16 on a computer with the operating system Microsoft Server 2003, Standard Edition.
The JAVA_HOME variable was NOT automatically created as part of the installation. So I created it myself.
I installed a voice recognition browser afterwards (that requires JDK1.3.1 update 06 or later) and it could not detect that the appropriate JDK had been installed and/or the JAVA_HOME variable had been set correctly.
Is it normal for the JAVA_HOME variable to not be created automatically? If this is not normal, what could be the problem and how can I rectify it? Again I need a version of JDK 1.3.1 for the browser to work.
Thanks,
Bonnie

Hi Bonnie
Maybe a bit late to comment, but for the record...
I just tried to install JDK1.3.1 on a Windows Server 2003 Standard Edition SP1 (version 5.2.3790) server.
I initially tried to install 1.3.1_13, but java -version failed quietly with following error in eventvwr logs:
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The application, C:\jdk1.3.1_13\jre\bin\java.exe, generated an application error The error occurred on 03/30/2006 @ 08:47:35.425 The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)I tried uninstalling and reinstalling JDK from Add|Remove Programs, but without success.
I then tried 1.3.1_8 and it worked fine first time.
I then tried 1.3.1_12 and it failed with this eventvwr message
Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)The 1.3.1 documentation that I've read doesn't explicitly mention support for Server 2003.
In contrast, 1.4 explicitly supports Server 2003.
Regards
Matthew

Cannot run the big size exe file ( 900MB) on Windows Storage Server 2003 x86 SP2 OS(Hyper-V VM machine)

When I run a big size exe file(>900 MB) on Windows Storage Server 2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.). we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
Server 2003 x86 SP2 OS VM machine). So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
My questions:
1. Is there the limitation of exe size to run on Windows
Storage Server 2003 x86 SP2 OS VM machine? If yes, what is the size of limitation?
2. What reason is this error? Is it related with Hyper-V?
Thanks,
Recky

Did you install the 2003 VM from scratch or did you create it via a P2V process? In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things.
First thing to check would be Shaon's suggestion to try it in another VM. If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again. Better yet, if the application can be run on a later version
of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
.:|:.:|:. tim

KB2898860 & KB2901115 Windows Update Fail on Server 2003 Std SP2

he following updates fail to install on a Windows Server 2003 Standard Edition SP2 file server.
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2901115)
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows Server 2003 and Windows Server 2003 R2 x86 (KB2898860)
KB2901115 log
0.453: 2014/03/12 08:22:46.429 (local)
0.453: C:\WINDOWS\SoftwareDistribution\Download\9d53f804e0198422c019c40c49b12668\update\update.exe (version 6.3.4.1)
0.453: Failed To Enable SE_SHUTDOWN_PRIVILEGE
0.453: Hotfix started with following command line: -q -z -er /ParentInfo:5a4383affe66c049ae6dc7084f9ad5a2
0.453: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
0.453: Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found
0.453: Condition Check for Line 1 of PreRequisite returned FALSE
0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.469: KB2901115 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
0.469: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.469: Setup cannot continue because one or more prerequisites required to install KB2901115 failed. For More details check the Log File c:\windows\KB2901115.log
0.469: Update.exe extended error code = 0xf0f4
KB2898860.log
0.359: 2014/03/12 08:22:46.929 (local)
0.359: C:\WINDOWS\SoftwareDistribution\Download\796443382934bf8f75f7c098c5fe7023\update\update.exe (version 6.3.4.1)
0.359: Failed To Enable SE_SHUTDOWN_PRIVILEGE
0.359: Hotfix started with following command line: -q -z -er /ParentInfo:549ffa455131174dba2210fe16739168
0.359: In Function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2
0.359: Exec SP1QFE.SP1Check.Section: Result SOFTWARE\Microsoft\NET Framework Setup\NDP\v1.1.4322 Key Not Found
0.359: Condition Check for Line 1 of PreRequisite returned FALSE
0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.359: KB2898860 Setup encountered an error: Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
0.359: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.359: Setup cannot continue because one or more prerequisites required to install KB2898860 failed. For More details check the Log File c:\windows\KB2898860.log
0.359: Update.exe extended error code = 0xf0f4
I would really appreciate any help on this matter.
Kind Regards
Chris

From the logfiles you supplied, it appears that SP1 for .NET FW 1.1 is missing.
These security updates will not install if you don't have SP1 for .NET FW 1.1 installed.
Check this KB article on information about how to verify if SP1 for .NET FW 1.1 is installed, how to get SP1 for .NET FW 1.1, etc
http://support.microsoft.com/kb/867460
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?

Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is there a limit for SGA_MAX_SIZE on windows Server 2003 Standard Edition

I have a 9.2.0.8 Standard Edition running on windows Server 2003 Standard Edition. I cannot set SGA_MAX_SIZE to more than 1.7G. I have total of 3G RAM on that machine.

In order to use memory over 4 GB the /PAE flag must be set and Oracle must be tuned
accordingly. As mentioned above, for using memory over 4 GB and less than 16 GB, the
/3GB flag can be set as well. Oracle uses memory above 4 GB by taking advantage of
the AWE (Address Windowing Extension) feature built into Windows 2000, Windows
2003 and Windows XP.
In order to use this memory, the Oracle administrator account (either LocalSystem or the
domain user that installed Oracle) must have the “Lock memory pages” privilege set. In
addition the AWE_WINDOW_MEMORY parameter must also be created and set. This
parameter specifies how much of the 3 GB virtual memory space allocated to Oracle
should be used for mapping database buffers. The default value of 1GB should be
sufficient and increasing this value could be detrimental, since you only have 3 GB of
virtual memory to use. The higher the value of AWE_WINDOW_MEMORY that you
have set, the more likely it is that you will experience user memory issues. Start with the
default value of 1 GB and tune upwards only if you need to.
Once these steps have been completed, larger memory can be set by configuring
DB_BLOCK_SIZE and DB_BLOCK_BUFFERS initialization parameters. When using
Very Large Memory (VLM) you should use DB_BLOCK_BUFFERS rather than
DB_CACHE_SIZE in order to configure memory.

Any problems running BO XI R1 on Server 2003 "R2" / SP2

Still running BO XI R1 on Server 2003 Standard Edition / SP1 but would like to UPGRADE OS to 2003 "R2" Standard Edition / SP2. I know R1 is out of support but is anyone running XI/R1 under this OS. Documentation for R1 only states support for 2003 SP1. I did open support dialog and they said it should be OK. Just trying to get a feel if anyone is actually running this configuration in the real world.

I installed SP2 on all my 2003 VM's for both XIR2 and XI 3.x. There are no issues that I know of everything works fine. SP1 used to cause issues on XIR1 with DEP but form the details you supplied I don't see that as an issue. Do you already have SP1 on 2003? Also you said 2003 R2 (which should be past the DEP patch). If that's the case then no issues that I know of.
Regards,
Tim

Windows Server 2003 R2 Sp2 Italian Language

Hi,
I have a big problem with installation of endpoint security. I installed it on a windows server 2003 R2 sp2 with italian languages and it dosn't works. I read in a post that italian languages is not supported but you are working for a fix. There are news?I need a quickly help to solve this problem!
Thank you

Hi there,
There's a release planned in the near term. However, I don't know for sure if that will include localization as a priority. Have you suggested an enhancement request through http://www.novell.com/enhancement_request/ for getting this fixed?
If you need to quickly resolve this, maybe you can setup an english (or another supported OS Language) server running into a VM inside a server with italian language and you can make that a temporary install meanwhile italian localization is done.
>>>
From: fgastald<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 1/14/2009 1:56 PM
Subject: Windows Server 2003 R2 Sp2 Italian Language
Hi,
I have a big problem with installation of endpoint security. I
installed it on a windows server 2003 R2 sp2 with italian languages and
it dosn't works. I read in a post that italian languages is not
supported but you are working for a fix. There are news?I need a quickly
help to solve this problem!
Thank you
fgastald
fgastald's Profile: http://forums.novell.com/member.php?userid=8611
View this thread: http://forums.novell.com/showthread.php?t=356754

Hyper-V VM Windows Server 2003 R2 SP2 Network Problems

Hi Guys,
I am trying to setup a new VM in my lab (I am using windows 8.1 in my host) with Windows Server 2003 R2 SP2. I already installed the integration services in that VM, the network adapter is ok (Hyper-V network adapter). Well, everything it seems to be
ok, but my W2K3 Machine keeps getting 169.xxx ip. My host is wireless , the virtual switch is ok, since I have other 4 VM (W2K8, W2K8R2, W2012, W2012R2) working fine with that switch and having access to the internet, just this VM with W2K3 is not working.
Do you guys can help ?
Thanks

Please check the properties of your NIC adapter in W2K3 if the Client for Microsoft Network is installed.
And also try to compare the network setting for other VMs NICs in Hyper-V to find the deference.
I would create new VM and install clean W2K3 for testing.
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
suggestion in a test environment before implementing!

I want downgrate the lic windows server 2008 SBS prem to server 2003 standard

Dear Sir,
We have purchsed windows server 2008 SBS prem edition
and i want downgrade that lic in to windows server 2003 standard edition
past 4 days i m trying to complete the procedure but still i m done that
now i have created one hotmail account
please provide me right step to complete that
[email protected]
This is my officeal mail to please get back to reply me ASAP
Lakhan Sawant

There is no downgrade procedure.
A downgrade is 'licensing only'.
You need to have a copy of Windows Server 2003 Standard Media to install, you will also need a license key for 2003.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Windows server 2003 Standard edition RAM Upgrade

We are using Windows server 2003 Standard 32 bit edition in our office With HP ProLiant DL580 Generation 5 hardware , We are trying to upgrade RAM to 8 GB from 4 GB but it is not taking, It is detecting 8 GB RAM while booting but not showing in my computer
property.
Same thing we tried with Windows server 2003 Enterprise edition and it is working fine there.
Is there anyway to upgrade it ?

It is normal. You simply need to use a 64 bit OS.
You need to re-install the OS to be running a 64bit version as no in-place upgrade is supported.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Windows server 2003 standard edition 32 BIT

I NEED THE ISO FILE FOR WINDOWS SERVER 2003 STANDARD EDTION
THE ISSUE IS I DONT REMEMBER THE PASSWORD TO LOGIN THE SERVER SO I AM LEFT WITH NOTHING BUT TO RE INSTALL THE WINDOWS SERVER
PLEASE TELL ME IF THERE IS A WAY TO RESET THE PASSWORD( I DONT HAVE ANY RECOVERY DISC ) OR DO I NEED TO INSTALL A FRESH COPY OF WINDOWS , IF YES THEN PLEASE PROVIDE ME A LINK TO DOWNLOAD THE RELEVANT FILE.
IS IT POSSIBLE TO INSTALL 64 BIT AND USE THE KEY OF 32 BIT ? PLEASE ADVICE
THANKS

Hi:
Not the usual thing in forums to use all caps, but no offense taken.
For password reset, try this:
http://www.petri.com/forgot_administrator_password.htm
Note that Domain Admin Passwords are handled differently, see the link at the end of the page.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Oracle 10g on Windows Server 2003 Standard 64bit

We are running Oracle 10g on Windows Server 2003 Standard 64bit Edition. I am NOT a DBA, so forgive my ignorance.
We have 16GB of physical memory in this server. I was told by a DBA that Oracle runs on "a single process", and because of that, he said that Windows Server 2003 Standard will only allow 2GB max for a single process.
Can anyone confirm this? Thanks.

This sounds more lika a Windows issue. If both Windows and app is "64-bit", I would expect the user virtual address space (per process) to be in the TiB range, if not larger.
(The said 2GiB limit applies to a 32-bit system.)
Message was edited by:
orafad

Unable to join Mac OS X 10.7.4 to windows server 2008 Standard SP2 Domain

Hi everyone,
I have an issue regarding the above, i have to connect several MBK pro using OS X 10.7.4 to a Windows Server 2008 Standard Service Pack 2.
I tried joining it using Static IP configurations, and using Domain names but it returns an error as Unable to connect to server and an error code 5302.
Please does anybody have a hint to this issue.....your help will be most appreciated.
Best Regards,
Iven.

I have verified every required settings closely and had it cross checked over and over again with the network administrator himself, every settings was in place but when i tried to bind with the domain it returns server not found.
I also ping the server and it works....i verified the RJ45 cable...all is fine.
i tried updating from 10.7.3 to 10.7.4 but the problem persists.
Infact originally i had to bind the Mac OS X 10.7.3 and 10.7.4 to a Windows Server 2008 Standard SP2, it didn't worked then afterwards i tried to bind them to a Windows Server 2008 R2....it worked on 2 but on the third it didn't.
So does anybody have an idea or can anyone confirm me if Windows Server 2008 Standard SP2 is compatible with Mac OS X 10.7.4???

Windows server 2003 64bit SP2 get error

Hi all,
When I login my Windows server 2003 64bit SP2, i got an error "Generic Host Process for Win32 Services encountered a problem and needed to close.", I click to see error code infomation and I see below info:
szAppName : svchost.exe szAppVer : 5.2.3790.3959
szModName : netapi32.dll szModVer : 5.2.3790.3959
offset : 000000000001e626
Please help me to fix it.
Thanks and Best Regard.

This one might help.
http://support.microsoft.com/kb/931852/en-us
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Cannot Install ADWS on server 2003 Standard SP2

Similar Messages

Maybe you are looking for