Cannot Install Shockwave: Get a Prompt

I have been trying for days to install Adobe Shockwave
player. When I click on INSTALL NOW, I get a prompt window that
says "Network error. Please check your internet connection and try
again." What does this mean? I am connected perfectly well to the
Internet!
Please help!

I was having the same trouble, Good to know I wasnt the only
one,, Did some searching and found
www.versiontracker.com
www.versiontracker.com
www.versiontracker.com/
make sure you go to the site that is compatible to your
computer...(right side top) then type in what you are looking
for... This place has oodles of stuff......free...I could spend
hours there...Hope this helps

Similar Messages

  • Cannot install software, getting installer.exe containes a virus and has been deleted

    Windows Vista, IE 9.  I'm conintually getting the and AVG message when I try to open IE.  I've tried to reinstall the Free AVG and I receive the message "Cannot install software, getting installer.exe containes a virus and has been deleted"
    Please help?

    I would suggest reposting your inquiry to the experts in the dedicated
    Virus and Malware Forum.
    Carey Frisch

  • Cannot install itunes, getting error message 8.0.50727.6195

    cannot install itunes, getting error message 8.0.50727.6195.  Any ideas? 

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Firefox quit on my MAC, I uninstalled and now cannot install, keep getting error that it is open or file is missing. PLEASE HELP, have to use Firefox for work.

    I have an iMAC w/OS 10.7.5. I was working in Firefox today and as I was entering letters it changed to unrecognizable characters so I had to exit the application. Firefox froze up and after trying to re-open it many times, I finally tried uninstalling and then re-installing. When trying to open a new download, I am given an error message saying that firefox is already open or that files are missing. I spent approx 2 hrs on the phone with Apple support and they were unable to locate problem and I am now turning to you for help. I need this fixed desperately and ASAP as the program that I use for work will only run on Firefox.

    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    See also http://kb.mozillazine.org/Error_loading_websites

  • I cannot install itunes get error message 2503

    I have an hp envey 4 computer that just got returned froma wiped out hard drive, I am trying to reinstall itunes and get an error message 2503. I had itunes on this before and it worked. Can any help me get itunes installed? Thanks

    Hey sndlot,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Regards,
    Delgadoh

  • Cannot install itunes. get error message program RSVCR80 not installed. windows error 126.

    cannot update or install itunes. ger error message RSVCR80 not installed. windows error 126.

    Hey sndlot,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Regards,
    Delgadoh

  • HP OfficeJet Pro 7600 will not complete Scan Feed/ Cannot Install Scan Software for Prompt

    HP OfficeJet Pro 2 issues
    1) Select Scan thru feeder, paper starts, the stops, does not complete scan.  Can I reset?
    2) Used to have desktop Scan Icon, updated to Windows 7 - 64 bit, no longer have the Scan Icon for desktop
    I love this printer.  Certainly would like to continue Scanning when needed.
    Sincerely,
    [edited email address by moderator]

    Hello AnnaY,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to scanning and paper feed issue from the ADF.
    I do have some troubleshooting steps that we can try in the attempt to resolve this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I also suggest that we do a complete uninstall and then a reinstall just in case an update was done that changed either the software for the printer or a Windows settings.
    Please remove the usb cable from the printer and the computer and leave it disconnected until further notice.
    The next step is to click on the following link and follow the instructions for Uninstalling the Printer Software.
    Once the uninstall is complete, please restart the computer.  When the computer is back up and running, please make sure that any firewalls or anti virus protection is temporarily disabled.
    The next step would be to install the HP Officejet Pro Full Feature Software and Driver.  Save the download to your Desktop to that it creates it's own icon.  This will make it easy to find.  Follow the instructions and please do not connect the usb cable until prompted to do so.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Cannot install software getting wierd messege

    I just got a new ipod mini and I tried to install the software and every time it gets up to then I get this messege that says "1607: unable to install Install Shield Scripting Runtime" I don't know what that means but I have itunes already on my computer I don't know if my ipod is compatible with my computer but someone help please!!!

    sara,
    Have a look at this.
    Error -1607: Unable to Install InstallShield Scripting Run Time

  • Cannot install xorg Get error about a conflict with e2fsprogs?

    IIRC, I got this error message:
    :: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
    error: failed to prepare transaction (could not satisfy dependencies)
    And this message, too:
    cryptsetup: requires e2fsprogs
    I'm stuck.
    Looks like I'm gonna reformat again!
    Last edited by RJARRRPCGP (2010-02-09 00:05:24)

    wonder wrote:
    RJARRRPCGP wrote:
    IIRC, I got this error message:
    :: util-linux-ng conflicts with e2fsprogs. Remove e2fsprogs? [Y/n] y
    error: failed to prepare transaction (could not satisfy dependencies)
    Looks like I'm gonna reformat again!
    not really, just do pacman -Syu
    Fixed it, for some reason, pacman didn't do a full update. Was wondering why I didn't see much being updated.
    Syu did the trick.

  • HT5654 when i attempt to download the 11.1.1 version of itunes i get a prompt stating the feature you are trying to use is on a network resource that is unavailable. i cannot seem to find this path on my system. what do i do?

    How do I install iTunes 11.1.1 when I get a prompt stating " The feature you are trying to use is on a network resource that is unavailable. I have done a search for the .msi file/folder and cannot find it?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I have safari 7.0.2 and OS 10.9.4, everytime I try to install a safari extension such as, Pocket, I get an error message that says, Cannot install extension, I get this with every one of them. Does anyone else have this problem?

    I have Safari 7.0.6 and OS 10.9.4. I cannot install any extensions. Everytime I select install I get an error message, "Cannot instal extension" Does anyone else have this problem?
    Thanks Steve

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Cannot install windows, starting to get really pissed off with this PLEASE HELP

    ok, i'm starting to get agitated with this.
    i cannot install windows XP, 2003, OR Longhorn on my machine.
    right now, i have the following setup:
    msi 865pe neo2 motherboard
    intel p4 3.2ghz w/HT (factory HS/Fan currently)
    1 dimm of PC3200 crucial DDR400
    30GB maxtor HD plugged into primary IDE
    pioneer dvd/cd drive as sencondary IDE
    alps 3.5" floppy drive
    antec true blue 480wt PSU
    i do the following:
    format with maxtor cd
    boot from OS cd
    start setup, reboot, continue
    the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
    ran the memtest checker and get errors on test #4
    i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
    so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
    below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
    advanced bios features:
    quick boot - enabled
    boot order - floppy, cd, HDD
    full logo - disabled
    s.m.a.r.t - enabled
    num-lock on boot - enabled
    floppy swap - disabled
    floppy seek - enabled
    save rom to HD - no
    boot to os/2 - no
    hyper threading - disabled
    mps revision - 1.4
    apic acpi sci irq - disabled
    cpu l1 & l2 cache - enabled
    bios cacheable - disabled
    c000, 32k shadow - disabled
    advanced chipset:
    dram timing...
    configure by spd - enabled
    (i dont know what to set timing to, nothing anyone has since said helps)
    integrated perfs:
    usb controller - enabled (same errors if its disabled too so its not USB)
    usb device legacy support - disabled
    on chip IDE:
    operate mode - legacy mode
    ata config - pata only
    sata keep enabled - yes (for sata drive i have, error either way)
    pata channel selection - both
    onboard ethernet, 1394, prmoise ide and audio all DISABLED
    pc healt status:
    cpu - 49°C/120°F (idle sitting in bios)
    system temp - 28°C/82ºF
    cpu fan - 2678rpm
    nb fan speed - 6490rpm
    vcore - 1.456 up to 1.502
    3.3v - 3.232v
    +5.0v - 5.003v
    +12v - 11.680v
    -12v - -11.743v
    -5.0v - -4.826v
    battery - 2.896v
    +5V SB - 4.945
    freq/voltage control
    Dynamic OC - disabled
    cpu ratio locked
    dram freq - auto
    spread spectrum - enabled
    cpu bus clock - 200
    ddr clock (grayed out) - 400
    adjust agp/pci - 66.66/33.33
    cpu vcore adjust - no
    cpu vcore (grayed out) - 1.5500v
    ddr power voltage - 2.65v
    agp power voltage - 1.50v
    SOMEONE PLEASE HELP ME!!!!!
    i'm running out of time, money, patience.
    if it cant be solved i'm going to set myself on fire!

    Quote
    Originally posted by REILLY875
    Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
    yea, i dont plan to run the 250. im gonna wait for the new 480.
    thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
    even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
    i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

  • I cannot install or uninstall itunes.  I get error message 2324?????

    I cannot install or uninstall itunes.  I get error message 2324?????

    You might need to run the Windows installer cleanup utility....start the troubleshooter for assistance at the following link:  http://support.microsoft.com/kb/2438651/

  • I cannot play some songs on itunes, I get a prompt for an old email address which not longer exists and I don't know the password.  HOw can I get them authorized to my new email address and password?

    I cannot play some songs on itunes, I get a prompt for an old email address which no longer exists and I don't remember the password.  How can I get these tunes transferred to my new email address and password?

    In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
    I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
    In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
    Thanks for your help.

  • I have iPhone 4S, latest OS installed. Everytime I have updates in app store, I get "cannot install livingsocial and 6 other..." I deleted livingsocial weeks ago

    I have an iPhone 4S, with the latest OS, 5.01 I believe it is. Most everything is great except everytime I have updates to download and install through the app store, I get a message saying "cannot install livingsocial and 6 other apps." The issue is that I only had livingsocial for a couple weeks then deleted it. That was a few weeks ago. Also I have no idea what the other 6 are. All my updates install fine, I just keep getting this message. And livingsocial and whatever the other 6 apps are never show up in the updates section, I just keep getting the stupid message. I click ok and it goes away. How do I get it to stop trying to install these apps? I've seen a ton of information about something similar happening on sync, but my issue is occurring during AppStore updates for which I can find no information!

    That seems like a really odd coincidence that both ours say "and 6 other apps." As far as the app waiting thing, I've never tried tapping it twice, but I would hold down til all the apps started shaking to move or delete, but this one is the only one with no x for delete, so when I tap it nothing happens. I have tapped it repeatedly but never exactly twice. But after a short while, no matter what I do, it will just disappear on its own. In fact, I saw your "tap twice" message very soon after you posted it and was going to try it, but it had already disappeared by then.

Maybe you are looking for