Cannot Load Backup-database cmdlet in powershell v 3.0

I am trying to work around with writing powershell script to backup sql server 2008 R2 database but the example i have searched they
require to add backup-sqldatabase cmdlet, but i am unable to see neither SQLPS or backup-sqldatabase cmdlets, I have recently ugraded to powershell v3 and i am running windows server2008 R2 and SQL Server 2008 R2.
Also there is a confusion windows
server 2008R2 is a virtual server i am using, but i downloaded powershell on my local desktop and for some reason it loads SQLps and backup-sqldatabase cmdlets
There is no database installed on my local machine but as soon as i type backup-sqldatabase i get to see the cmdlet on screen

See the top part of this post
on how to get SQLPS module.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Similar Messages

Cannot load backup (due to changed Apple ID/updated email address)

I have followed the answer provided to Ross202 by Gail from Maine. Unfortunately I fear my problem may be larger.
Objective
Move iCloud-backed up data to new iPhone (old phone "drowned" over holidays)
Context
My original Apple ID was EmailOld. This email address (EmailOld) has been terminated. Unfortunately my iCloud / backup is linked to Apple ID EmailOld (so verifying this is not possible). My new AppleID is EmailNew, and this has been verified. I have tried changing my Apple profile to EmailOld, as suggested by Gail (without the verification email).
Despite following Gail's steps, Apple could not backup my old account. Error message:
"Cannot load backups. There was a problem loading your iCloud Backups. Try again, set up as a new iPhone, or restore from an iTunes backup.
Options
- Try again (*)
- Set up as a new iPhone (**)
- Restore from iTunes (***)"
Troubleshooting steps
(*) Try again repeats same issue.
Apple ID EmailOld: "iCloud Sign in" --> Agree --> "It may take a few minutes to set up your Apple ID" --> Choose backup screen --> takes an age --> above message repeated
AppleID EmailNew: (Update AppleID to EmailNew in My Apple ID) "iCloud Sign in" --> Agree --> "It may take a few minutes to set up your Apple ID" --> "Choose backup" screen, with options --> selection of backups --> but then I either 1) have to enter correct password corresponding with EmailOld (and EmailOld and current password don't match), or 2) get error message above
(**) Set up as a new iPhone (using:
(a) old Apple ID says --> "Could Not Sign In | There was a problem connecting to the server". I have reviewed and checked wifi connection, all in order here. I have tried using new account, same error message,
(b) new Apple ID works. And this is hopeful - the device can detect I have about 10GB data stored on iCloud. However, I cannot agitate this sync from iCloud to my new device
(***) I have logged in to iTunes with Apple ID EmailOld (it works - it even says 17 updates on my apps, however I can't agitate updates). I cannot get a sync going.
My phone requests me to "Connect to iTunes", but I cannot do anything more than this. (I have unplugged and plugged my USB cable many times)
I have also logged in to iTunes with Apple ID EmailNew (it works too). But, again, I cannot connect to iTunes
Possible solutions
Recognition of 10GB iCloud-backed up data on new device (despite the fact that old Apple ID doesn't match new Apple ID)
Any help will be greatly appreciated! 5 hours and counting :/
Thanking the community in advance

Call Apple Care for your country and request help reactivating the Apple ID and resetting the password.

I lost my handset and now have a replacement but when I try to backup from icloud I get a message saying 'cannot Load Backups' Can anyone help?

I lost my handset (iphone 4s) and now have a replacement but when I try to restore from icloud I get a message saying 'cannot load backups'. Can anyone help?

Unless you've tried to install an older version of iTunes that message likely indicates a corrupt library file. See Empty/corrupt library after upgrade/crash...
tt2

Cannot do backup database in the startup menu!!

Dear all,
Please help to tell me what's wrong - I cannot do the backup database option in
the Oracle software menu, the error is :
Unkown log mode : SP2-0640
Log file is at SP2-0640
Can anyone tell me?
Rgds/Simon Wong

Unkown log mode : SP2-0640
Log file is at SP2-0640Hi Simon,
I tryed to investigate this case and here is a result:
If Windows user which trying to start backup is not member of the ORA_DBA user group, I'm getting on XP-box your error (above). After putting user in ORA_DBA group backup worked properly.
Cheers!

Cannot load backup onto older MacBook Pro

I own a early 2008 MacBook Pro and my mom owns a early/late 2011 MacBook Pro. Mine has recently been showing signs of slowing down a little bit and my mom asked if I wanted to switch computers since I will be going back to school and she rarely uses hers. Well we both backed up our computers on the AirPort Time Capsule and wiped our computers. Everything from my 2008 laptop loaded fine onto her 2011 laptop but when she went to load everything from her volume on the AirPort Time Capsule, it cannot find the volume. Is this because all of her files are going onto an older MacBook Pro? Both are updated to the newest software and everything. Anyone have any idea what is going on and how we can "Find" her backup and load it onto the 2008 computer? Thanks!

Mavericks can have issues. I presume you are attempting to migrate the infomation.
First mount the TC hard disk on the older computer in finder. You might need to do it manually. ie Go, Connect to server if the computer is having trouble seeing the TC drive at all.
Then it might not easily find the backup. Please ensure you have ipv6 turned on to link-local.
You also can have permissions issues. This can become very problematic.
In the end you may need to manually restore files, by mounting the sparsebundle in finder.
See Pondini Q17.. but please do read from 14-16 so you understand it.
http://pondini.org/TM/FAQ.html
Also the stuff on the home page about migrate is important albeit it is not up to Mavericks.
http://pondini.org/TM/Home.html

I keep getting the "Cannot Load Backups" error message on my iPad when trying to load my old settings, this has been happening for two days

Needed to replace my iPad for school, but I can't access my recent backups on the new iPad, I updated the software and it still isn't working, has anyone else had this problem? Would appreciate help
Thanks
-Caesar

Hi I would Restore New iPhone back to Factory Settings After Restore use same Apple ID & you will get all your Apps &Data back. This will get rid of any bugs. Cheers Brian

How to do backup database in the menu of Oracle XE

Dear all,
When I do database backup selecting from the Oracle XE menu, it output the error as below :
sql statement: create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 08/31/2006 17:14:14
RMAN-20000: abnormal termination of job step
RMAN-11003: failure during parse/execution of SQL statement: create pfile='C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA' from spfile
RMAN-11001: Oracle Error:
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Best regards,
Simon Wong

Don't duplicate thread:
Cannot do backup database in the startup menu!!
It's also easier to help you if we have all information and
errors regarding this issue on one place.
Thanks!

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Cannot load Exchange Online Protection commands in Remote PowerShell

My colleagues and I cannot load the Exchange Online Protection commands in Remote PowerShell.
It just loads the Exchange Online cmdlets.
Where are we going wrong?
PS C:\Users\jmorrison> $UserCredential = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
PS C:\Users\jmorrison> $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.protection.outlook.com/powershell-liveid/
-Credential $UserCredential -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI: "https://outlook.office
365.com/powershell-liveid?PSVersion=4.0&realm={I've removed my domain name for security reasons}.co.uk "
PS C:\Users\jmorrison> Import-PSSession $Session
ModuleType Version
Name
ExportedCommands
Script
1.0        tmp_4fnmyflw.she
{Add-AvailabilityAddressSpac...
PS C:\Users\jmorrison> Get-TransportRule
Get-TransportRule : The term 'Get-TransportRule' is not recognized as the name of a
cmdlet, function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Get-TransportRule
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo
: ObjectNotFound: (Get-TransportRule:String) [], CommandNotF
oundException
+ FullyQualifiedErrorId : CommandNotFoundException

I've moved MX records to EOP and seems to be fine all domain expect few.<o:p></o:p>
I can see that problematic domain has "-" between domain names.<o:p></o:p>
mydomain.com<o:p></o:p>
mydomain-com.mail.protection.outlook.com --> has no problem, however<o:p></o:p>
mydomain.usa.com<o:p></o:p>
mydomain-usa-com.mail.protection.outlook.com having issue <o:p></o:p>
when i checked in mx lookup it says MX record has NO A Record.<o:p></o:p>
any suggestions<o:p></o:p>

Error while creating database - Cannot load backend library 'oci.dll'

Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?

I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

Cannot load program sqlplus, error Symbol ___strcmp64 is not exported from dependent module /usr/lib/libc.a[shr_64.o]

Dear all,
We are expriencing an error after a redirected restore, we are restored a backup of a prod system on a new host.
While running a 'brrestore' command to get the restore, it returns the following error:
BR0401I BRRESTORE 7.40 (8)
BR0169I Value 'util_file_online' of parameter/option 'backup_dev_type/-d' ignored for 'brrestore' - 'util_file' assumed
BR0405I Start of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0484I BRRESTORE log file: /oracle/SID/sapbackup/reojarkx.rsb
BR0278E Command output of '/oracle/SID/112_64/bin/sqlplus':
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
        0509-130 Symbol resolution failed for sqlplus because:
        0509-136   Symbol ___strcmp64 (number 71) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-136   Symbol ___strcpy64 (number 76) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-136   Symbol __setjmp (number 78) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-192 Examine .loader section symbols with the
                 'dump -Tv' command.
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0279E Return code from '/oracle/SID/112_64/bin/sqlplus': 255
BR0302E SQLPLUS call for database instance SID failed
BR0406I End of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0404I BRRESTORE terminated with errors
Can someone help to get the reason of this issue.
Thanks, regards

Roman,
how can you know that it is about AIX? The OP didn't tell us.
Besides that, I agree that different OS versions may be the root cause.
regards

Backup-GPO cmdlet errors in Task Scheduler

I have scheduled a simple script on my Windows Server 2012 domain controller to backup my group policies (separate from the System State backup). I ran the script manually, and it works as expected. I scheduled the script in Task Scheduler using a service
acct with domain admin privileges. Due to our domain policy settings, I had to select the "Do not store password" option on the job, otherwise the usual error regarding "no session" is presented. This means I have access to local resources
only (on the DC).
I also right-clicked the job and selected "run" and the job executes properly. However, when the job kicked off at the scheduled time on its own, it only ran partially. The date stamped backup folder was created, and it contained a partial "manifest.xml"
file which is created at every backup. The manifest only has the header in it, no other content such as GPO names and GUIDs.
In the Powershell transcript output, it generates an error when the Backup-GPO cmdlet runs:
Backup-Gpo : The system cannot open the device or file specified. (Exception from HRESULT: 0x8007006E)
The command is:
Backup-Gpo -All -Path $backup_dir\$date_stamp
And yes, I have selected to run the job without the user being logged in. Is it possible to backup domain GPOs without the credentials cached in the job? Are the GPOs considered a "local resource" on the domain controller?

Anna,
You are correct, if I disable that policy setting that I do not need to select "Do not store password" and the job runs fine.
However, the PowerShell script does run with the "Do not store password" option checked, it just normally fails when trying to access the policies to backup with a seemingly random error depending on the domain controller. Then, after 3 days of failures,
I checked this morning and it had run fine on two of three domain controllers. No changes to policy or the script or the job. It isn't cut and dried as to why it works or doesn't work.
I guess what I am ultimately looking for is a better description of what resources are still available using that setting ("Do not store password"); are ADDS related commands considered local resources on domain controllers, or do you always need a cached
credential?
Jim

Cannot load module libjox10.a(shr.o)

Hi All!
After a backup/restore system copy, and after checking (and applyng!) all the step descibed in the following link,
Re: In DBA Planning Calendar CheckDB Job Failed
on my SAP NW2004s (AIX, Oracle 10g) I have the following problem:
if I try to execute the command startsap with usr <SID>adm i can't start DB and I have the following error message
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Aug 4 23:58:21 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
exec(): 0509-036 Cannot load program oracleBWP because of the following errors:
        0509-150   Dependent module libjox10.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox10.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist.
ERROR:
ORA-12547: TNS:lost contact
exec(): 0509-036 Cannot load program oracleBWP because of the following errors:
        0509-150   Dependent module libjox10.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox10.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist.
exec(): 0509-036 Cannot load program oracleBWP because of the following errors:
        0509-150   Dependent module libjox10.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox10.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist.
ORA-12547: TNS:lost contact
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
    Notify Database Administrator.
/usr/sap/BWP/SYS/exe/run/startdb: Terminating with error code 12
Also i check the entry in /etc/services and is correctly defined
sapmsBWT        3600/tcp        # SAP System Message Server Port
I can start/stop correctly my oracle database with ora<SID> user using sqlplus.
If I try the R3trans -d command with user <SID>adm the return code is 0.
The <SID>adm env configuration contains the following line
LIBPATH=/usr/lib:/lib:/usr/sap/BWP/SYS/exe/run:/oracle/client/10x_64/instantclient
and the $ORACLE_HOME is set to /oracle/BWP/102_64
Please, can someone help me?
Thanks a lot!
Marzia

Hi Mark e Stefan.
First of all, thank for your cooperations!
Now... I've checked the env path as you say, and everithing is ok.
After that I try to check the "List of Dynamic Dependencies" with the ldd command, and this is the result:
bwpadm> ldd $ORACLE_HOME/bin/oracle
/oracle/BWP/102_64/bin/oracle needs:
         /usr/lib/libc.a(shr_64.o)
         /usr/lib/libpthreads.a(shr_xpg5_64.o)
Cannot find libjox10.a(shr.o)
         /usr/lib/libdl.a(shr_64.o)
         /usr/lib/libperfstat.a(shr_64.o)
         /usr/lib/libodm.a(shr_64.o)
         /usr/lib/libc.a(aio_64.o)
         /unix
         /usr/lib/libcrypt.a(shr_64.o)
         /usr/lib/libcfg.a(shr_64.o)
         /usr/lib/liblvm.a(shr_64.o)
Now, "just for fun", i've created a symlink to the quality test system (BWT)
/oracle/BWT -> BWP
and executing the ldd $ORACLE_HOME/bin/oracle command i didn't get any error!
Now, after executing the relink all command I get the following error message:
ld: 0706-006 Cannot find or open library file: -l java
        ld:open(): A file or directory in the path name does not exist.
ld: 0706-006 Cannot find or open library file: -l jvm
        ld:open(): A file or directory in the path name does not exist.
make: 1254-004 The error code from the last command is 255.
/bin/ld -G -o /oracle/BWP/102_64/sysman/lib/libnmemso.so -bE:/oracle/BWP/102_64/sysman/lib32/libnmemso.exp -bI:/usr/lib/aio.exp -L/oracle/BWP/102_64/lib32   -L/oracle/BWP/102_64/sysman/lib32/ -blibpath:/oracle/BWP/102_64/lib32/:/oracle/BWP/102_64/lib/:/oracle/BWP/102_64/sysman/lib32/ /oracle/BWP/102_64/sysman/lib32/libnmem.a /oracle/BWP/102_64/sysman/lib32/libnmer.a /oracle/BWP/102_64/sysman/lib32/libnmeu.a /oracle/BWP/102_64/sysman/lib32/libnmt.a    /oracle/BWP/102_64/sysman/lib32/libnml.a /oracle/BWP/102_64/sysman/lib32/libnmee.a /oracle/BWP/102_64/sysman/lib32/libnmefmgr.a /oracle/BWP/102_64/sysman/lib32/libnmevr.a /oracle/BWP/102_64/sysman/lib32/libnmehu.a /oracle/BWP/102_64/sysman/lib32/libnmehl.a /oracle/BWP/102_64/sysman/lib32/libnmepm.a /oracle/BWP/102_64/sysman/lib32/libnmedc.a /oracle/BWP/102_64/sysman/lib32/libnmedt.a /oracle/BWP/102_64/sysman/lib32/libnmedm.a /oracle/BWP/102_64/sysman/lib32/libnmedr.a /oracle/BWP/102_64/sysman/lib32/libnmeb.a /oracle/BWP/102_64/sysman/lib32/libnmec.a   /oracle/BWP/102_64/sysman/lib32/libnmesched.a /oracle/BWP/102_64/sysman/lib32/libnmectl.a /oracle/BWP/102_64/sysman/lib32/libnmejc.a /oracle/BWP/102_64/sysman/lib32/libnmej.a -L/oracle/BWT/102_64/jdk/jre/bin/classic -L/oracle/BWT/102_64/jdk/jre/bin -blazy -ljava -ljvm /oracle/BWP/102_64/sysman/lib32/libnmeclumgr.a /oracle/BWP/102_64/sysman/lib32/libnmecluster.a /oracle/BWP/102_64/sysman/lib32/libnmexml.a -lttsh10      -lld -lm `cat /oracle/BWP/102_64/lib32/sysliblist` -lm
After, after, after all wi try to set JRE_LIB_DIR=$(ORACLE_HOME)/jdk/jre/bin with the following command
export JRE_LIB_DIR=$(ORACLE_HOME)/jdk/jre/bin
but nothing changes!
Any ideas?!?
Thanks
Marzia

Can't backup database in NOarchivelog mode

Hi there,
I get this error when I run this command from rman:
backup database
Starting backup at 19-JAN-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 01/19/2011 17:18:10
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
please help.
Thanks in advance!

user13286861 wrote:
ok it finally shutdown cleanly.
I altered it in archivelog mode.
Now I can run a backup database command from rman?What does it cost to try it and see? What would be the worst thing that could possibly happen? An error message saying you can't do that?
And please note, this forum is not a chat line. Operators are NOT standing by. Posting a new message every two minutes to give an update on the fact that the database hasn't shut down yet is not necessary and not productive.
If there are a lot of pending transactions when you issue SHUTDOWN IMMEDIATE, they will all have to be rolled back as part of the shutdown. That can take some time. And if you bypass that with SHUTDOWN ABORT, they will have to be rolled back as part of instance crash recovery on the next startup, which will also take some time. Five minutes may feel like an eternity when you are sitting there waiting for your command to complete, but is no reason to panic.

Cannot Load Backup-database cmdlet in powershell v 3.0

Similar Messages

Maybe you are looking for