Cannot load custom Swing component

Hi, I have an existing desktop application where there are quite a few custom Swing components in use. There's not been an issue before with these components (past 2 yrs).... until today :-). I opened my IDE (Java Studio Enterprise 8.1) and began work on an existing JPanel only to find all kinds of errors on the panel. Here is what I'm seeing along with setup details:
1) Existing panels will not load without errors referring to classpath issues indicating that the custom components on the panel cannot be found.
2) Custom component(s) cannot be added to a newly created clean JPanel. The following message is given: "Cannot load component class <class name> from Project: <project name>. The class must be compiled and must be on the classpath of the project this form belongs to."
3) I've checked the class path >5 different times with various configurations and find no obvious issues. The custom components are part of the project. I've even put the projects classes output folder in the project compile class path but to no avail. Also the project compiles cleanly without issues.
4) I've removed Java Studio and reinstalled it but still get the same error.
5) JDK = 1.6
6) Source level = 1.6
I'm not sure what else to do. Help please.
Regards,
Daniel

4) I've removed Java Studio and reinstalled it but still get the same error.Have you also ensured that you are not reusing the user directory from previous install? Please take a look at http://blogs.sun.com/karthikr/entry/jse_directories
If it does not help, are there any error messages in the ide log file (found at <userdir>/var/log/messages.log)?
- Have you considered using NetBeans as an alternative to JSE8.1. From http://forum.java.sun.com/thread.jspa?threadID=5192837 :
Java Studio Enterprise 8.1 is itself built on top of NetBeans version 5.0. NetBeans is an ide developed as opensource at www.netbeans.org; it is extensible ide and so add-on modules can be developed to run on top of netbeans. And that is what JSE8.1 does; JSE 8.1 is NetBeans 5.0 plus several add-on modules (like UML etc).
The latest stable version of NetBeans is 5.5.1 and NetBeans 6.0 is currently under development with milestone 10 being the latest release.
Home page: www.netbeans.org
Download: http://www.netbeans.info/downloads/index.php (From the main page, you can also download several packs which are addons that provide various functionality).
Docs: http://www.netbeans.org/kb/index.html
Docs on EE apps: http://www.netbeans.org/kb/trails/java-ee.html
Further community resources (mailing lists, issue tracking etc) : http://www.netbeans.org/community/index.html
wiki.netbeans.org
NetBeans download is free. And since it is developed as an opensource project, the source is freely available under CDDL license.

Similar Messages

  • Appletviewer cannot load Swing Applet

    Hi. there
    I'm facing the problem that appleviewer cannot load
    my swing applet.
    Acctually, a few days ago, before I implemented Button Event Handling, appleviewer work properly.
    But now It's not working.
    java -verbose appletviewer jadmin.html
    -> Exception in thread "main" java.lang.NoClassDefFoundError: appletviewer
    I already reinstall JDK1.3 because I chaged java.policy file.
    and then this is not a source-level problem, I put into source System.out.pritln(), but not printed.
    This is my classpath and path.
    [classpath]
    .;C:\jdk1.3\jre\lib\rt.jar;C:\jdk1.3\lib\tools.jar;C:\jakarta-tomcat-3.2\lib\servlet.jar;C:\jkjdbc\jkjdbc.jar
    [path]
    .;C:\jdk1.3\bin;C:\jdk1.3\Jre\bin;C:\Program Files\Microsoft SDK for Java 4.0\Bin
    Please Let me Know about it.
    Thank you for reading.
    p.s In Current source, several inner classes(event handling class), but appletviewer work properly with inner class prev. source that I mentioned.

    Hi,
    You don't have to call java to run the appletviewer. You'll onlyhave to run:
    appletviewer jadmin.html
    to make it work.
    Regards,
    Kurt.

  • Changing custom AWT component to Swing component

    I created my own AWT component. I'd like to change it to Swing component.
    Does anyone know how to change or create a custom Swing component?
    Please also provide some framework to develop a custom Swing component.

    First try to know the difference between SWING & AWT. You can either adopt to SWING or AWT but be specific of what you want to do !
    If you like to migrate from AWT to SWING ,then make the necessary changes in your coding.(ie, re frame things like , Frame to JFrame , Button to JButton ,JTextField to JTextField etc..)
    For creating custom components ,say a component called MyLabel and you should design a class which extends JLabel and do whatever you like...
    eg import javax.swing.*;
    public class MyLabel extends JLabel
      MyLabel(String title)
         this.setTitle(title);
         this.setBackground(Color.white);
         this.setForeground(Color.blue);
    }For more details go to java tutorials.

  • Custom ui component with default layout

    Hello,
    I am trying to develop custom swing components with default layout set.
    Both component class and its BeanInfo are written with NetBeans 6.1
    However, when trying to put this custom swing component into interface builder (matisse) of
    NetBeans 6.1, the default layout is always replaced with GroupLayout.
    Is there any way to correctly specify default layout manager used in a custom
    swing component?
    thanks a lot!

    Hi Jacek
    You can embed your custom component with IFrame element in WebDynpro view. IFrame element loads a content by URL which can be bound to controller's context. You can store your custom HTML content in MIME folder of the WebDynpro component. At runtime you can get the URL to the MIME content and initialize the IFrame with the URL.
    However, IFrame element is being reloaded by WebDynpro framework too often during each request/response cycle. This is a disadvantage of the solution.
    BR, Siarhei

  • Resizing the wrapped swing component inside the javafx stage

    I have a customized swing component & need to wrap it in javafx stage. But as & when the javafx scene resizes, I want to resize the swing component accordingly.
    One way of resizing this is to scale the swing component. But is there any other way or layout to do it efficiently.
    --Nitin Pokalwar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hello
    <p>Let's have a look at this Forms PJC/JavaBean site</p>
    Francois

  • Firefox sync fails at loading the crypto component on win7

    Firefox Sync cannot load the crypto component.
    The log file contains the following message:
    2010-10-13 04:01:30 Service.Main DEBUG Crypto check failed: [Exception... "Component returned failure code: 0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE) [nsIJSCID.getService]" nsresult: "0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE)" location: "JS frame :: file:///C:/Users/Adrian/AppData/Roaming/Mozilla/Firefox/Profiles/Adrian/extensions/%7B340c2bbc-ce74-4362-90b5-7c26312808ef%7D/modules/util.js :: anonymous :: line 365" data: no]

    hello vo_z, the log shows that the issue is occurring particularly during syncing your history - can you try to exempt it from being synced in the sync-preferences and see if the error bar is still showing up...

  • Cannot load component class className from project: ProjectName

    Hi guys,
    I've a strange issue.
    I found some solutions on google and on this forum, but they doesn't work for me.
    I've a javafx application in netbeans in which I also use swing controls.
    I created a custom jlabel control
    public class Label extends JLabel {
        public Label()
        private void setAspect(String csFontName, int nSizeFont, boolean bold,Color cColor)
            int style=bold ? Font.BOLD : Font.PLAIN;
            this.setFont(new Font(csFontName,style,nSizeFont));
            this.setForeground(cColor);
        public Label(String csText)
            super(csText);
            setAspect("Tahoma",10,false,Color.black);
        public Label(String csText, int nSize)
            super(csText);
            setAspect("Tahoma",nSize,false,Color.black);
        public Label(String csText, int nSize, boolean bold)
            super(csText);
            setAspect("Tahoma",10,bold,Color.black);
        public Label(String csText, int nSize, boolean bold, Color cColor)
            super(csText);
            setAspect("Tahoma",10,bold,Color.black);
    }I selected Label.java file in the project and I click on Tools->add to palette and I selected Swing controls as family.
    I restarted netbeans and I found it in the palette.
    I try to drag it into my swing form and I've :
    Cannot load component class <ProjectName>.Label from project: D:\Progetti\<ProjectName>.
    The class must be compiled and must be on the classpath of the project to which this form belongs.Following forums I went on netbeans log
    org.openide.ErrorManager$AnnException: msg
         at org.openide.ErrorManager$AnnException.findOrCreate(ErrorManager.java:870)
         at org.openide.ErrorManager$DelegatingErrorManager.annotate(ErrorManager.java:653)
    Caused by: java.lang.ClassNotFoundException: <ProjectName>.Label
         at org.netbeans.modules.form.project.ProjectClassLoader.findClass(ProjectClassLoader.java:178)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at org.netbeans.modules.form.project.FormClassLoader.findClass(FormClassLoader.java:83)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:247)
         at org.netbeans.modules.form.project.ClassPathUtils.loadClass(ClassPathUtils.java:98)
         at org.netbeans.modules.form.MetaComponentCreator.prepareClass0(MetaComponentCreator.java:1322)
         ... 34 more
    msg
    Cannot load component class ortholab2.Label from project: D:\Progetti\<ProjectName>.
    The class must be compiled and must be on the classpath of the project to which this form belongs.I hope someone can help me ,
    Thanks

    That sounds more like a NetBeans-specific question, not a general java programming question.
    Plus, your desciption is inconsistent:
    Cannot load component class <ProjectName>.Label from project: D:\Progetti\<ProjectName>.
    Cannot load component class ortholab2.Label from project: D:\Progetti\<ProjectName>What is the fully-qualified name of this class: ortholab2.Label ? ortholab2 being both the package name and the project name?
    And where do you use it, in the same project or in yet another NetBeans project?

  • Cannot load component from JAR file.

    I got the message : cannot load component ... from JAR file. The class must be compiled and must be on the classpath of the project...
    I just add a javabean from a JAR file from Palette manager, then drag and drop it, then got this message.
    Can anyone tell me what i was wrong ? Thank you.

    Hi,
    You should paste your error log here to easy for other to help you.
    For your scenario, it is a big chance you didn't include the jar file into your classpath, please check.
    Thanks.

  • Cannot load classes for custom user store

    I implemented a custom user store and deployed as sda library into NetWeaver preview SP16. NetWeaver is not able to load those classes when configuring that user store through Visual Administrator. Below is the error message I got,
    Unable to register user store!
    java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Can not instantiate UserContext.
         at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:78)
         at com.sap.engine.services.security.server.UserStoreFactoryCache.registerUserStore(UserStoreFactoryCache.java:120)
         at com.sap.engine.services.security.server.UserStoreFactoryImpl.registerUserStore(UserStoreFactoryImpl.java:150)
         at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImpl.registerUserStore(RemoteUserStoreFactoryImpl.java:64)
         at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImplp4_Skel.dispatch(RemoteUserStoreFactoryImplp4_Skel.java:99)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.lang.ClassNotFoundException: mypackage.myusercontextimpl
    Found in negative cache
    Loader Info -
    ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
    Parent loader name: [Frame ClassLoader]
    References:
       library:com.sap.ip.basecomps
       library:core_lib
       common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
       library:servlet
       library:sapxmltoolkit
       library:com.sap.mw.jco
       library:com.sap.util.monitor.jarm
       library:j2eeca
       library:opensql
       interface:security
       interface:log
       interface:shell
       interface:keystore_api
       library:ejb20
       interface:webservices
       library:com.sap.guid
       interface:appcontext
       interface:endpoint_api
       interface:resourceset_api
       interface:resourcecontext_api
       common:service:iiop;service:naming;service:p4;service:ts
       interface:ejbcomponent
       interface:container
       interface:visual_administration
       interface:transactionext
       interface:dsr_ejbcontext_api
       service:timeout
       library:tc~jmx
       interface:cross
       service:file
       service:locking
       library:tcSLUTIL
       service:memory
       library:antlr
       library:jdbdictionary
       library:opensqlextensions
    Resources:
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\dbpool.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\basicadmin.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_compat.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\adminadapter\adminadapter.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupimpl.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx_notification\jmx_notification.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\security\security.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\com.sap.security.core.ume.service\com.sap.security.core.ume.service.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_userstore_lib.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\webservices_lib.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupapi.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas_test.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\sqljimpl.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.tpd.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.perm.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\connector\connectorimpl.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\saaj-api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\configuration\configuration.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_jaas.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_xmlbind.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_util.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_csi.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_core.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_ssf.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\userstore\userstore.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_https.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_service_api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxrpc-api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\opensqllib.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\deploy\deploy.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx_sec.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxm-api.jar
       C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\keystore\keystore.jar
    Loading model: {parent,local,references}
         at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
         at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:75)
         ... 13 more
         at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
         at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
         at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
         at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:139)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:306)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    Hi sheshu0022,
    Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Custom itemRenderer component based on cell value: error 1009

    I'm working on an item renderer for a dataGrid that has different states depending on the cell and row values.
    The cell value is a toggle (true or null), and sets whether content should be shown in the cell or not
    The row properties determine what is shown when the cell value is true.
    The dataGrid dataProvider is populated based on user id input.
    I created the itemRenderer as a custom actionscript component, closely following this example:
    360Flex Sample: Implementing IDropInListItemRenderer to create a reusable itemRenderer
    However, my component results in Error #1009 (Cannot access a property or method of a null object reference) when a user id is submitted.
    package components
         import mx.containers.VBox;
         import mx.controls.*;     import mx.controls.dataGridClasses.DataGridListData;
         import mx.controls.listClasses.BaseListData;
         import mx.core.*;
         public class toggleCellRenderer extends VBox
              public function ToggleCellRenderer()
              {super();}
              private var _listData:BaseListData;   
                   private var cellState:String;
                   private var cellIcon:Image;
                   private var imagePath:String;
                   private var imageHeight:int;
                   private var qty:String = data.qtyPerTime;
                   private var typ:String = data.type;
              public function get listData():BaseListData
                   {return _listData;}
              public function set listData(value:BaseListData):void
                   {_listData = value;}
              override public function set data(value:Object):void {
                   super.data = value;
                   if (value != null)
                   //errors on next line: Error #1009: Cannot access a property or method of a null object reference.
                   {cellState = value[DataGridListData(_listData).dataField]}
              override protected function createChildren():void {
                   removeAllChildren();
                   if(cellState=='true'){
                        cellIcon = new Image();
                        addChild(cellIcon);
                   //there is another state here that adds another child...
              //next overrides commitProperties()...
    There are no errors if I don't use an itemRenderer--the cells correctly toggle between "true" and empty when clicked.
    I also tried a simple itemRenderer component that disregards the cell value and shows in image based off row data--this works fine without errors or crashing. But I need to tie it to the cell value!
    I have very limited experience programming, in Flex or any other language. Any help would be appreciated.

    Your assumption that the xml file either loads with "true" or nothing  is right.
    After modifying the code to the following, I don't get the error, but it's still not reading the cell value correctly.
    package components
         import mx.containers.VBox;
         import mx.controls.*;   
         import mx.controls.dataGridClasses.DataGridListData;
         import mx.controls.listClasses.BaseListData;
         import mx.core.*;
         public class toggleCellRenderer extends VBox
              public function ToggleCellRenderer()
               super();
              private var _listData:BaseListData;   
              private var cellState:Boolean;
              private var cellIcon:Image;
              private var imagePath:String;
              private var imageHeight:int;
              private var qty:String;
              private var typ:String;
               public function get listData():BaseListData
                 return _listData;
              override public function set data(value:Object):void {
                   cellState = false;
                   if (listData && listData is DataGridListData && DataGridListData(listData).dataField != null){
                       super.data = value;
                       if (value[DataGridListData(this.listData).dataField] == "true"){
                           cellState = true;
              override protected function createChildren():void {
                   removeAllChildren();
                   if(cellState==true){
                        cellIcon = new Image();
                        addChild(cellIcon);
                   //there is another state here that adds another child...
              //next overrides commitProperties()...
    - didn't set the value of qty or typ in the variable declarations (error 1009 by this too--I removed this before but wanted to point out in case its useful)
    - added back in the get listData() function so I could use the listData
    - changed the null check
    All cells are still returning cellState = false when some are set to true, even if I comment out [if (value[DataGridListData(this.listData).dataField] == "true")] and just have it look for non-null data. That shouldn't make a difference anyway, but it confirms that all cells are returning null value.
    Swapping out the first if statement in set data with different variables results in the following:
    [if (listData != null)]  all cells return null (cellState=false for all)
    both [if (value != null)] and  [if (DataGridListData != null)]  results in error 1009 on a line following the if, so I assume they return non-null values.
    All rows have data, just not all fields in all rows, so shouldn't listData be non-null?  Could it be that the xml file hasn't fully loaded before the itemRenderer kicks in?
    I also realized  I had removed the item renderer from many of the columns for testing, and since some columns are hidden by default only one column in the view was using the itemRenderer--hence the single alert per row I was worried about earlier.
    Thanks for your help so far.

  • Solaris java sapgui error JniAgiLibAdaptor. init : Cannot load JNI library

    i have a problem java sapgui.
    Launch the Sapgui and then try to connect to any one of the three choices and it should produce the following error.
    i am running this on a Solaris 10 32bit. This sam java SAPGUI runs fine when i boot into the windows xp pro. Hope this helps.
    gui version;
    SAPGUI for Java 7.10 rev 8 (java),
    no library (lib)
    (Version ID 071000040800)
    Mon Mar 30 10:34:24 MEST 2009
    uw1059, 710_REL, 1054563
    Java VM: Sun Microsystems Inc. Version 1.6.0_14
    OS: SunOS(x86) Version 5.10
    The version of Java being used is:
    java -version
    java version "1.5.0_16"
    Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
    Java HotSpot(TM) Client VM (build 1.5.0_16-b02, mixed mode, sharing)
    Thank You,
    Ferhan
    JniAgiLibAdaptor.<init>: Cannot load JNI library
    details;
    java.lang.Exception: JniAgiLibAdaptor.<init>: Cannot load JNI library
    at: com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:29)
    at: com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:283)
    at: com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:297)
    at: com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:798)
    at: com.sap.platin.base.logon.GuiLogonFrame.doConnect(GuiLogonFrame.java:838)
    at: com.sap.platin.base.logon.GuiLogonFrame$SymListener.actionPerformed(GuiLogonFrame.java:443)
    at: javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
    at: javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
    at: javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
    at: javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    at: javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
    at: java.awt.Component.processMouseEvent(Unknown Source)
    at: javax.swing.JComponent.processMouseEvent(Unknown Source)
    at: java.awt.Component.processEvent(Unknown Source)
    at: java.awt.Container.processEvent(Unknown Source)
    at: java.awt.Component.dispatchEventImpl(Unknown Source)
    at: java.awt.Container.dispatchEventImpl(Unknown Source)
    at: java.awt.Component.dispatchEvent(Unknown Source)
    at: java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at: java.awt.LightweightDispatcher.proc
    Attempt to load shared library
    /opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so failed.
    The library file exists, so either the program has
    insufficient privileges to access the library or the library
    is not loadable by the shared object loader.
    Please recheck the system requirements for your operating
    system and make sure all required libraries are installed.
    details;
    ava.lang.UnsatisfiedLinkError: /opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so: ld.so.1: java: fatal: /opt/SAPClients/SAPGUI7.10rev8/bin/libJPlatin.so: wrong ELF data format: ELFDATA2MSB (Possible cause: endianness mismatch)
    at: java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at: java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at: java.lang.ClassLoader.loadLibrary(Unknown Source)
    at: java.lang.Runtime.load0(Unknown Source)
    at: java.lang.System.load(Unknown Source)
    at: com.sap.platin.r3.util.GuiJniLoader.loadPlatinLibrary(GuiJniLoader.java:56)
    at: com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:27)
    at: com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:283)
    at: com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:297)
    at: com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:798)
    at: com.sap.platin.base.logon.GuiLogonFrame.doConnect(GuiLogonFrame.java:838)
    at: com.sap.platin.base.logon.GuiLogonFrame$SymListener.actionPerformed(GuiLogonFrame.java:443)
    at: javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
    at: javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
    at: javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
    at: javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    at: javax.swing.plaf.basic.BasicB

    Hello Ferhan,
    the output of the AboutBox is indicating that you are trying to run SAP GUI for Java on Solaris 10 with x86 CPU. Unfortunately, the library required to be loaded is complied for SPARC. Please have a look at the system requirements part of the manual coming with the installer of SAP GUI for Java or [note 959236|https://service.sap.com/sap/support/notes/959236].
    Best regards
    Rolf-Martin

  • Unable to add the Custom Pipeline component in to the Visual Studio Tool Box

    I have tried to create the custom Pipeline component to transfer the large message in Receive side,
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Xml;
    using System.IO;
    using Microsoft.BizTalk.Message.Interop;
    using Microsoft.BizTalk.Component.Interop;
    namespace Sample.LargeFilesDecoder
    [ComponentCategory(CategoryTypes.CATID_PipelineComponent)]
    [ComponentCategory(CategoryTypes.CATID_Encoder)]
    [System.Runtime.InteropServices.Guid("25984614-BCFD-4c47-82FC-4A2300B76411")]
    public class LargeFilesDecoder : IBaseComponent,
    IComponentUI,
    IComponent,
    IPersistPropertyBag
    #region IBaseComponent Members
    public string Description
    get
    return "Pipeline component used to receive Larger Files through SFTP Ports";
    public string Name
    get
    return "LargeFilesDecoder";
    public string Version
    get
    return "1.0.0.0";
    #endregion
    #region IComponentUI Members
    public IntPtr Icon
    get
    return new System.IntPtr();
    public System.Collections.IEnumerator Validate(object projectSystem)
    return null;
    #endregion
    #region IPersistPropertyBag Members
    private string _largeFileLocation;
    private int _thresholdSize;
    public string LargeFileLocation
    get { return _largeFileLocation; }
    set { _largeFileLocation = value; }
    public int ThresholdSize
    get { return _thresholdSize; }
    set { _thresholdSize = value; }
    public void GetClassID(out Guid classID)
    classID = new Guid("DBA77DFA-5D3E-4B85-8F78-1D6330B6BCA0");
    public void InitNew()
    public void Load(IPropertyBag propertyBag, int errorLog)
    object val1 = null;
    object val2 = null;
    try
    propertyBag.Read("LargeFileLocation", out val1, 0);
    propertyBag.Read("ThresholdSize", out val2, 0);
    catch (ArgumentException)
    catch (Exception ex)
    throw new ApplicationException("Error reading PropertyBag: " + ex.Message);
    if (val1 != null)
    _largeFileLocation = (string)val1;
    if (val2 != null)
    _thresholdSize = (int)val2;
    public void Save(IPropertyBag propertyBag, bool clearDirty, bool saveAllProperties)
    object val1 = (object)_largeFileLocation;
    propertyBag.Write("LargeFileLocation", ref val1);
    object val2 = (object)_thresholdSize;
    propertyBag.Write("ThresholdSize", ref val2);
    #endregion
    #region IComponent Member
    public IBaseMessage Execute(IPipelineContext pContext, IBaseMessage pInMsg)
    if (_largeFileLocation == null || _largeFileLocation.Length == 0)
    _largeFileLocation = Path.GetTempPath();
    if (_thresholdSize == null || _thresholdSize == 0)
    _thresholdSize = 4096;
    if (pInMsg.BodyPart.GetOriginalDataStream().Length > _thresholdSize)
    Stream originalStream = pInMsg.BodyPart.GetOriginalDataStream();
    string largeFilePath = _largeFileLocation + pInMsg.MessageID.ToString() + ".msg";
    FileStream fs = new FileStream(largeFilePath, FileMode.Create);
    // Write message to disk
    byte[] buffer = new byte[1];
    int bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    while (bytesRead != 0)
    fs.Flush();
    fs.Write(buffer, 0, buffer.Length);
    bytesRead = originalStream.Read(buffer, 0, buffer.Length);
    fs.Flush();
    fs.Close();
    // Create a small xml file
    string xmlInfo = "<MsgInfo xmlns='http://Sample.LargeFilesDecoder'><LargeFilePath>" + largeFilePath + "</LargeFilePath></MsgInfo>";
    byte[] byteArray = System.Text.Encoding.UTF8.GetBytes(xmlInfo);
    MemoryStream ms = new MemoryStream(byteArray);
    pInMsg.BodyPart.Data = ms;
    return pInMsg;
    #endregion
    I have
    Added .dll file in to the Global Assembly Cache (use gacutil)
    Copied it the Pipeline Components folder (E:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components)
    Everything was successful, when I try to add the component to the Toolbox I get the message like below and cannot find the component in Toolbox.
    Tried several times but still getting stuck in the same place. I am using Visual Studio 2013. Any help is greatly appreciated.

    Do not put the Assembly in the %\Pipeline Components folder.  Pipeline Component Assemblies should be in the GAC only.
    To correctly deploy a custom Pipeline Component, you can follow the steps in this Wiki Article:
    http://social.technet.microsoft.com/wiki/contents/articles/26404.biztalk-deploying-custom-pipeline-components-in-biztalk-server-2006-and-higher.aspx
    I have never seen that specific error before.  Are you sure you're browsing from the Pipeline Components tab?

  • URGENT---EJB 3.0--Toplink essential - loading custom session customizer

    Dear all,
    I am a newbie to EJB as well as JPA...for some reason i need to write a custom session customizer
    i config the persistence.xml with the following property:
    <property name = "toplink.session.customizer" value = "customizer.MyCustomizer"/>
    My EJB project structure:
    Application1
    ->EJB_Project1
    ->customizer
    ->MyCustomizer.java
    ->bean
    ->BeanARemote.java
    ->BeanBRemote.java
    ->META-INF
    ->persistence.xml
    when i want to test the EJB project..the following exception occur...
    ==============================================================
    Exception Description: ClassNotFound: [customizer.MyCustomizer] specified in [toplink.session.customizer] property.
    Internal Exception: oracle.classloader.util.AnnotatedClassNotFoundException:
    Missing class: customizer.MyCustomizer
    Dependent class: oracle.toplink.essentials.internal.security.PrivilegedAccessHelper
    Loader: oracle.persistence:1.0
    Code-Source: /C:/Oracle10-1-3-11/toplink/jlib/toplink-essentials.jar
    Configuration: <code-source> in /C:/Oracle10-1-3-11/jdev/system/oracle.j2ee.10.1.3.39.14/embedded-oc4j/config/server.xml
    This load was initiated at oracle.persistence:1.0 using the Class.forName() method.
    The missing class is available from the following locations:
    1. Code-Source: /G:/JDeveloper/jdev/mywork/Application1/EJB_Project1/classes/ (from <ejb> in unknown)
         This code-source is available in loader current-workspace-app.root:0.0.0.
         This is the current thread's context loader, and it appears that Class.forName() was used to load the dependent class.
         If a loader was not explicitly passed to Class.forName(), try passing the result of calling Thread.currentThread().getContextClassLoader().
    ==============================================================
    the application server cannot load the class but it can locate where the class is...
    why???
    i futher check if the problem is related to parent-child class-loader mechanism
    in the code, i call the Class.getClassLoader() in order to obtain which classloaders
    my session customizer and JPA EntityManager (implied for the whole toplink essential?) were loaded by...
    result: for custom session customizer..
    top classloader == jre.bootstrap:1.5.0_09
    2nd classLoader == jre.extension:0.0.0
    3rd classLoader == api:1.4.0
    4th classLoader == oc4j:10.1.3
    5th classLoader == system.root:0.0.0
    6th classLoader == default.root:0.0.0
    result: for JPA EntityManager..
    top classloader == jre.bootstrap:1.5.0_09
    2nd classLoader == jre.extension:0.0.0
    3rd classLoader == api:1.4.0
    4th classLoader == oc4j:10.1.3
    it seems the EntityManager is loaded in 'higer level' class loader, so it can't access
    class load in 'lower level' class loader ..
    Dependent class: oracle.toplink.essentials.internal.security.PrivilegedAccessHelper
    Loader: oracle.persistence:1.0But something strange is that the exception message saying the loader is oracle.persistence:1.0 ???
    Could anybody help me......?
    what is the solution...?
    i have searching in the web for days but can't find solution !!!
    Thank you very much ...
    ** My development environment:
    JDeveloper: 10.1.3.1
    window xp sp2
    sun java sdk 5 update 9

    i have futher check if the problem is related to class loading
    i call the Class.getClassLoader() in order to obtained which classloaders
    my session customizer and EntityManager were loaded...
    obtain the following result: for my session customizer..
    top classloader == jre.bootstrap:1.5.0_09
    2nd classLoader == jre.extension:0.0.0
    3rd classLoader == api:1.4.0
    4th classLoader == oc4j:10.1.3
    5th classLoader == system.root:0.0.0
    6th classLoader == default.root:0.0.0
    for EntityManager..
    top classloader == jre.bootstrap:1.5.0_09
    2nd classLoader == jre.extension:0.0.0
    3rd classLoader == api:1.4.0
    4th classLoader == oc4j:10.1.3
    it seems the entity manager is loaded in 'higer level' class loader, so it can't access
    class load in 'lower level' class loader ..
    Dependent class: oracle.toplink.essentials.internal.security.PrivilegedAccessHelper
    Loader: oracle.persistence:1.0But something strange is that the exception message saying the loader is oracle.persistence:1.0 ????
    Could anybody help me......?
    what is the solution...?
    Thank you ...

  • Windows cannot load the user's profile but has logged you on with the default profile for the system.

    My Windows 7  crashed a couple days ago after a windows update, I got this message.
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    I restarted the machine and got this message
    Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
    DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
    I checked the event Log I found these .
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
     DETAIL - The process cannot access the file because it is being used by another process.
    This is the first error in the event viewer after a successful logon
    The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
     If the event originated on another computer, the display information had to be saved with the event.
    ccSetMgr
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Access is denied.
    Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
    The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    then this one
    The Desktop Window Manager has exited with code (0x40010004)
    Then this before it shutdown.
    The User Profile Service has stopped.
    I started up the PC and the first message I got was
    How can I get access to my user profile? do I need to createa new Administrator account? Please help
    The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

    hi do the following
    1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
    2. If prompted click yes,
    3.  expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
    something similair)
    5. right click the sid and press delete.
    6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
    in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
    i cant remember which one is which but just check both, one will still have all your files and folders in it.
    i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

  • SOA WebLogic : Cannot load JDBC driver class

    Hi, I'm new to this Oracle SOA World. Currently I'm trying to configure environment on my system. I found a very useful document to install all related SOA component to my system, the document name was 'Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.5.0)'. I did all the steps written in the document and have installed all the components successfully, component including Database, Jdevelper, WebLogic Server, RCU, SOA suite, service bus, all are installed successfully.
    But when I'm trying to Configure Application Server (start -> Oracle SOA 11g-Home1), at one step 'Configure JDBC Component Schema' , here I'm getting this message
    * The driver class listed below was not found in product installation
    vendor: Derby
    Driver: org.apache.derby.jdbc.clientdriver
    A Test will not be performed on any database connections using this driver
    In addition, when i just ignore this message and continue installation, after installation when i run weblogic server then it gives error and gets terminated
    here is weblogic server log:
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    Listening for transport dt_socket at address: 8453
    java version "1.6.0_24"
    Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
    Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
    Starting WLS with line:
    C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
    rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx
    1024m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.
    security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xveri
    fy:none -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javeli
    n... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbcons
    ole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE
    ~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcom
    mon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apach
    e.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=
    C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Djrockit.optfile=C:\Oracle\MIDDLE~
    1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.
    dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\FMWCON~1\servers\AdminSe
    rver -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\con
    fig\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1\domains\BAS
    E_D~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\USER_P~1\
    domains\BASE_D~2\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\
    Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\config\fmwconfig\jps-config.xml -Dorac
    le.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2\servers\AdminSe
    rver\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirector
    y=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\O
    RACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.md
    s.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.com
    mon.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=f
    alse -da:org.apache.xmlbeans... -Dsoa.archives.dir=C:\Oracle\Middleware\Oracle_
    SOA1\soa -Dsoa.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=
    C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~2 -Dtangosol.coherence.clusteraddress
    =227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -D
    javax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dwebl
    ogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=t
    rue -Djavax.net.ssl.trustStore=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrus
    t.jks -Dem.oracle.home=C:\Oracle\Middleware\oracle_common -Djava.awt.headless=tr
    ue -Dums.oracle.home=C:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.disc
    over=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dwe
    blogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifes
    t_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_c
    lasspath weblogic.Server
    Listening for transport dt_socket at address: 8453
    <2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
    Provider self-integrity check for better startup performance. To enable this ch
    eck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <2012-mar-02 kl 21:14 CET> <Info> <Security> <BEA-090906> <Changing the default
    Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable th
    is change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <2012-mar-02 kl 21:14 CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLog
    ic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems
    Inc.>
    <2012-mar-02 kl 21:14 CET> <Info> <Management> <BEA-141107> <Version: WebLogic S
    erver 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
    changed to STARTING>
    <2012-mar-02 kl 21:14 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-
    tuning thread pool>
    <2012-mar-02 kl 21:14 CET> <Notice> <Log Management> <BEA-170019> <The server lo
    g file C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServe
    r\logs\AdminServer.log is opened. All server side log events will be written to
    this file.>
    <2012-mar-02 kl 21:14 CET> <Notice> <Security> <BEA-090082> <Security initializi
    ng using security realm myrealm.>
    <2012-mar-02 kl 21:14 CET> <Warning> <oracle.as.jmx.framework.MessageLocalizatio
    nHelper> <J2EE JMX-46041> <The resource for bundle "oracle.jrf.i18n.MBeanMessage
    Bundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets"
    cannot be found.>
    <2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
    changed to STANDBY>
    <2012-mar-02 kl 21:14 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state
    changed to STARTING>
    <2012-mar-02 kl 21:15 CET> <Critical> <JTA> <BEA-110482> <A logging last resourc
    e failed during initialization. The server cannot boot unless all configured log
    ging last resources (LLRs) initialize. Failing reason:
    weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
    org.apache.derby.jdbc.ClientDriver
    weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class:
    org.apache.derby.jdbc.ClientDriver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
    01)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
    ionEnvFactory.java:75)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
    nvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
    y(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
    java:235)
    Truncated. see log file for complete stacktrace
    >
    <2012-mar-02 kl 21:15 CET> <Error> <Deployer> <BEA-149205> <Failed to initialize
    the application 'wlsbjmsrpDataSource' due to error weblogic.application.ModuleE
    xception: .
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(Modu
    leListenerInvoker.java:199)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(Depl
    oymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
    river.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(Dep
    loymentCallbackFlow.java:159)
    Truncated. see log file for complete stacktrace
    Caused By: weblogic.common.resourcepool.ResourceSystemException: Cannot load dri
    ver class: org.apache.derby.jdbc.ClientDriver
    at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:3
    01)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(Connect
    ionEnvFactory.java:75)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.<init>(ConnectionE
    nvFactory.java:131)
    at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactor
    y(ConnectionPool.java:712)
    at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.
    java:235)
    Truncated. see log file for complete stacktrace
    >
    <2012-mar-02 kl 21:16 CET> <Alert> <OSB Security> <BEA-387068> <There is no PKI
    credential mapper provider configured in your security realm. Service key provid
    er management will be disabled. Configure a PKI credential mapper provider if yo
    u need service provider support. This is typically the case if you have Oracle S
    ervice Bus proxy services with web service security enabled or outbound 2-way SS
    L connections.>
    <2012-mar-02 kl 21:16 CET> <Warning> <Coherence> <BEA-000000> <Oracle Coherence
    3.6.0.4 (member=n/a): Local address "127.0.0.1" is a loopback address; this clus
    ter node will not connect to nodes located on different machines>
    <2012-mar-02 kl 21:17 CET> <Warning> <J2EE> <BEA-160140> <Unresolved optional pa
    ckage references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.applcore.mod
    el, Specification-Version: 0.1, Implementation-Version: 11.1.1.0.0, referenced f
    rom: C:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\
    tmp\_WL_user\usermessagingserver\a7bt7z]. Make sure the referenced optional pack
    age has been deployed as a library

    Hi:
    try placing the jars that represent ur driver, here
    For both Windows and Linux, you must perform the following steps:
    Drop the vendor-specific driver JAR files to the user_projects/domains/soainfra/lib directory.
    Drop the vendor-specific driver JAR files to the <Weblogic_Home>/server/lib.
    Edit the classpath to include the vendor-specific jar file in <Weblogic_HOME>/common/bin/commEnv.sh
    This info was copied, from here: http://docs.oracle.com/cd/E21764_01/integration.1111/e10231/adptr_db.htm#CHDBEJDC
    Hope this helps
    best

Maybe you are looking for

  • How to display applications in tabs on a single page in webcenter spaces

    Hi, I am working on a project in Webcenter spaces where we have a welcome page with few hyperlinks on a bar in the top section .Each hyperlink is associated with an application url. The requirement is when a user clicks on any link, it should populat

  • BS not available to assign in Integration Directory

    Hi all - I changed Business System in SLD. When I try to reassign BS in SLD, it's not showing up in list to selct. Please help me in resolving this error, your input is greatly appreciated. Thanks, Pat

  • AP_INVOICE_DISTRBUTIONS_ALL table has no data for "Never Validated" Invoice

    Hi, Our client requires to display the GL Account as it shows on the payables distributions screen. Till 11i, we never have this issue. But in R12, it looks weird that the AP_INVOICE_DISTRBUTIONS_ALL table, doesn't even have any data if the Invoice i

  • Hooking up multiple I-pods to Itunes

    We have 2 ipods but need to use one computer to hook up to but not all at once. Is there a way to use one I-tunes and have 2 seperate accounts on it. Everytime I hook my I-pod up it want to put my wifes songs on it. Any help would be appreciated.

  • Multiple queries in jsp

    Hello all, is there a way to specify two, three or more different queries in jsp page acording to a user's input? For instance. HTML page calls jsp. On that html page the user can specify criteria for selection. Such as the user wants to see rows whe