BS not available to assign in Integration Directory

Hi all -
I changed Business System in SLD. When I try to reassign BS in SLD, it's not showing up in list to selct.
Please help me in resolving this error, your input is greatly appreciated.
Thanks,
Pat

Hi Pat,
if you cannot assign a BS in the ID
then it might mean that it's already assigned
(you can only do it once)
(check the objects tab - business systems)
then you can only assign BS to a scenario in ID
(clicking on the BS)
Regards,
michal

Similar Messages

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

Lync 2010 phone not available when users have two Directory Number Associations in CUCM

Hello everyone,
We currently have a little issue with our LYNC 2010 to Cisco UC Integration (CUCM 8.5.1), I’m wondering if someone can shed some light please.
There are some users in our organisation having two Directory Number Associations in CUCM (Primary Extension for work number and IPCC Extension for team number), which result them not be able to dial out from Lync. For these users, it appears the Cisco phone
is not available in Lync.
I tried to disable the team number from them, and after reboot, the Cisco phone came back available and dialing out from Lync was enabled.
Is there any workaround for this issue? Thank you in advance.
Shawn

As far as Lync concern lync only do a number translation and send the call to cisco for reaching the destination.So you have to check how the call split is configured for users with respect to the team number and Extension.So in this case you need to have
2 different dial pattern to cisco based on how they accept the calls.
One pattern will translate the Primary extension number to the format cisco accept
Second pattern to translate the Team extension number to the format cisco accept.
Jayakumar K

Why my Local Adapter Engine not showed in SLD and Integration Directory?

Hi guru,
I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
what is the problem?

The post-installation configuration steps are not complex, I exactly followed.
what other reason could it be? have any guru configured local adapter engine before?

SAP GRC 10 SP13 PC- AM scenario not available for assigning to connector

Hello Expert,
We are on GRC 10 SP 13 PC . We want to add connector to AM connector group under SPRO-GRC_Common Componenet Setting - Integration framework - Maintain Connector and Connector types - Define Connector groups.
I remember all other groups ( AC related) which are available in this area are coming because of activation of BC sets. I have activated all the BC sets related to PC but AM group is not available.
Any Suggestion?
Kind Regards
Asheesh

Hello Asheesh,
AM Integration scenario is available in next path in SPRO.
SPRO -->GRC --> Common Component Setting - Integration framework -->Maintain Connection Settings
Regards,
Gowrinadh

No service for system YYYYY client ZZZ in Integration Directory

We recently applied SP12 to our XI 3 on SR1. When we try to send an IDoc from SAP R/3 system to SQL database (IDoc and JDBC Adapters) we are getting error messag in SM58 (R/3 System) as "No service for system SAPIDS, client 800 in Integration Directiry". SAPIDS is the port created using IDX1 and 800 is the R/3 IDES client. RFC communications etc work good. We do not se any difference in the set up of Integration Repository as well as Integration Directory.
Please advise.
Thanks,
Bhaskar

Hi Bhaskar
As the error message says, the service is not available. In your Integration directory, first clear the SLD cache, by choosing from the menu Environment --> Clear SLD Data. Then open your scenario and see if you any Business System assigned to it, you check that by going to,
your scenario --> service without party --> business system, and if there are no business system existing, you have to assign a business system.
Also have a look at the following thread,
No service for system ... in Integration Directory
cheers
Sameer

Integration directory is not getting displayed..

Hi Gurus,
Our developers are facing an issue here- they are not able to view the Integration Directory (ID) window with their own ID's as well as PISUPER. They are able to view the same instance ID from a different server. But I'm able to view to ID from my machine. When they key in their login credentials in the integration directory, after which a window will be opened and that they cannot see it.The process and the application keeps running in the windows task manager. Is this sort of a display problem or something?
Any thoughts would be appreciated!
Regards,
Sriram

Hi,
Also make sure they are have JDK1.5 and not any other version installed. Try to delete your temporary Java files on your PCs and do the re-initialization Raj mentioned, and try again. You can also enable Java console from control panel to see where you're getting stuck.
Regards,
Gökhan

Erro to aplly note 764176 - Integration Directory not appear

Hi everyone...
After applied note 764176 (step 5) my Integration Directory is not appearing in SLD as tecnical system. Does anybody know how to solve this problem ?
Best Regards
Wendell

Hi All,
I got solved the error before, but now my Adapter Engine still is not appearing in Integration Directory. Could you help us ?
Note. I applied full note 764176.
Best Regards

Can not open Integration Directory nor Integration Repository help please!

Hi,
I am not able to load the integration directory and repository java parts.
The funny thing is that it worked yesterday for me, but I re-installed a newer version of Java and it crashed. I have tried to delete all the Java versions and install the version 1.6.0_03_b21 (this version works for my team mates), but I have only found version 1.6.0_03_b07, and it does not work.
I am able to acces to the SAP PI 7.1 portal (http://proxy:port/dir/start/index.jsp), but when I enter here and try to access to the integration directory/repository, I get an error.
Your help is much apreciated. Greetings from Spain!
Edited by: Silvia Garcia Rua on Jul 7, 2011 6:09 PM

Hi all,
Thank you so much for the answers, but I am still not able to open them.
Hope this error message helps:
java.io.IOException: Server returned HTTP response code: 504 for URL: http://<<host>>:<<port>>/rep/repository/com.sap.xpi.ib.client.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getJarFileWithoutCache(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCachedJarFile(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCachedJarFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
     at com.sun.javaws.Launcher.launch(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Mapped Drive - Location Not Available

I have a small recurring problem that is starting to get a little bit bigger.
My environment is:
Server 2012 Standard, AD, File Server, Print Server. Running on Hyper-V (2008)
Clients are Windows XP, Vista, 7, and 8.1 all professional.
I have a number of mapped drives that all go to this same file server. If I open a Windows Explorer window on any client and leave it open, after a while (always seams random), I will eventually get an error message saying "Location Not Available"
The contents of the directory I was looking at goes blank when this message comes up. I can click OK and immediately hit refresh on the Explorer window and the contents will come back.
Most of the time this is annoying but I am finding a couple of applications that do not like this behavior. They crash or close connections when this happens.
I have had a Remote Desktop connection open to this server while getting this and it does not get disconnected. I do not see anything that looks related at all in the log files of the client, the server or the Hyper-V host. I have made sure that the drivers
on Hyper-V are up to date as well as all firmware (especially the network cards).
I am not sure if the problem started when I upgraded my personal workstation to Windows 8 (from 7) but that is when I first started to notice this.

Hi,
Do you mean the issue only occurs on Windows 8 systems?
Also whether these mapped folders are DFS shares or just normal shared folder?
If DFS is involved, test to disable Client Side Caching to see if it is related. Please add this key in all DFS target servers.
HKLM\System\CCS\Services\LanmanServer value=<sharename> cscflags=48
As it is a random issue, it will be difficult to find out the root case. You can try to capture a network trace with Network Monitor when the issue occurs. Let's see if any specific information could be found.
Detailed steps could be found:
http://support.microsoft.com/kb/812953
Note: As the issue occurs randomly, the package may be large as you need to wait until the issue occurs.
Note2: you can upload package to OneDrive however as is open to public so everyone could see that package.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

JSF Deployment error - login.faces not available

I am new to JSF and am having deploying my first example JSF pages in Eclipse on default Tomcat (6.x).
I feel I have done everything stated in the tutorial http://www.exadel.com/tutorial/jsf/jsftutorial-kickstart.html (I did not repeat the step by step instructions in the tutorial - instead, used these instructions to create my own pages / logic). However, I still get the following error:
HTTP Status 404 - /reportwriter/pages/login.faces
type Status report
message /reportwriter/pages/login.faces
description The requested resource (/reportwriter/pages/login.faces) is not available.
Here is my directory structure:
reportwriter
- src
- LoginBean
- LoginServer.java
- Resources.properties
- js
- html
- images
- pages
- login.jsp
- webRoot
- WEB-INF
- lib
- faces-config.xml
- web.xml
- index.jsp with a one line jsp forward to pages/login.faces
here is my faces-config.xml
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
<application>
<message-bundle>LoginBean.Resources</message-bundle>
<locale-config>
<default-locale>en</default-locale>
<supported-locale>en-us</supported-locale>
<supported-locale>fr</supported-locale>
<supported-locale>es</supported-locale>
</locale-config>
<view-handler>com.sun.facelets.FaceletViewHandler</view-handler>
</application>
<navigation-rule>
<from-view-id>/pages/login.jsp</from-view-id>
<navigation-case>
<description>Handle case for successful login</description>
<from-action>#{loginServer.loginAction}</from-action>
<from-outcome>success</from-outcome>
<to-view-id>/pages/task.jsp</to-view-id>
</navigation-case>
<navigation-case>
<description>Handle case for unsuccessful login</description>
<from-action>#{loginServer.loginAction}</from-action>
<from-outcome>failure</from-outcome>
<to-view-id>/pages/failure.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/pages/success.jsp</from-view-id>
<navigation-case>
<from-outcome>return</from-outcome>
<to-view-id>/pages/login.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/pages/failure.jsp</from-view-id>
<navigation-case>
<from-outcome>return</from-outcome>
<to-view-id>/pages/login.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>loginServer</managed-bean-name>
<managed-bean-class>LoginBean.LoginServer</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>
and here is web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.4" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>server</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>
<listener>
<listener-class>com.sun.faces.config.ConfigureListener</listener-class>
</listener>

<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>
Can you think what I may be missing here to get the login.faces not available error?
One hint I have is - if I do not set a jsp forward line in the index.jsp file, I get the server deployment for the index.jsp file OK. But not when I have the forward from index.jsp to /pages/login.faces
I also tried setting the context in tomcat server.xml file as follows:
<Context debug="0"
docBase="C:/evsapi/ReportWriter/reportwriter/WebRoot"
path="/LoginBean" reloadable="true"/>
Still no use.
Please help!
Edited by: tipseeker on Dec 1, 2008 3:51 PM

tipseeker wrote:
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
"http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
I highly recommend your to stop with this and restart with JSF 1.2 instead. JSF 1.0 is legacy and may have still some nasty bugs. You may find this JSF 1.2 / Eclipse 3.4 / Tomcat 6.0 startup tutorial useful as well: [http://balusc.blogspot.com/2008/01/jsf-tutorial-with-eclipse-and-tomcat.html]
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.xhtml</param-value>
</context-param>There's the root cause of the problem, I think. Why did you add this? Are you using JSP or Facelets? This configuration is typical for Facelets, but in your remaining code I only see JSP's being mentioned.

Integration Directory Problem

Hi,
We did a new XI installation 2004s.
Now ID is not opening.
In SLD->Tech Sys->Exchange Infrastructure->
we are not able to see the Integration Directory entry.
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
Is it possible to view IR,
Try to restart the client side Java webstart, If you still face the issue kindly Reinstall your client side java webstart.
After this 2 option if you face the error still then the Post Installation might be error.
Regards
Agasthuri Doss

[Solved]"foomatic-rip" for printer "Z22" not available

I found CUPS drivers for the lexmark Z22 here: http://www.linuxprinting.org/show_print … exmark-Z22 and I installed the printer successfully but I get this in the status field: "Paused: Filter "foomatic-rip" for printer "Z22" not available: No such file or directory". I checked AUR and there's no foomatic-rip package.
Last edited by jordanwb (2008-12-17 17:58:44)

pacman -S foomatic-db foomatic-db-engine foomatic-filters
foomatic-filters itself might even be enough in your case

Active Directory server is not available

i have just setup and started testing a new exchange 2007 on my network. we did not have a exchange before, so this is a new install.
my domain, xxx.com is a windows 2000 native AD. the exchange 2007 is a win 2003 sp1 x64, it is also a DC and has all roles assigned to it
in my network i have
dc01 win2000 sp4 dc (gc)
dc02 win2000 sp4 dc (gc)
exch01 win 2003 sp1 dc, rid, pdc, fmso, gc, infrastucture and naming
the install went well, and i have been testing it for the past 2 weeks this dummy accounts. test smtp connectors, etc. all was working fine. to the point that i have started planing the migration of the users
today i did some mods to IIS for a owa free SSL from startcom (as well as the root CAs). i have remove it since.
i now get the following errors when i start the console, or shell. :
Active Directory server exch01.xxx.com is not available. Error message: A local error occurred.
It was running command 'get-ExchangeAdministrator'.
The following error(s) were reported while loading topology information:
get-ExchangeServer
Failed
Error:
Active Directory server exch01.xxx.com is not available. Error message: A local error occurred.
A local error occurred.
get-UMServer
Failed
Error:
Active Directory server exch01.xxx.com is not available. Error message: A local error occurred.
A local error occurred.
HELP.. i have no idea what it does not like.
exbpa does not report anything, i even get it to connect to the exch01 for it AD access.
Any ideas??
Thanks
Paul Gartner
(over all i like what i have been seeing in ex2007)

i think that you might be confusing "AD user account" and "profile". you DO NOT delete administrator from your AD Users and Computers. you only delete the Profile (\documents and settings\administrator folder). you can NOT do this while you are logged on using the administrator account.
be sure to backup any data in your my documents and any favorites
create another user that is in the domain admin group of your active directory, log on with that account and verify that the exchange tools works. then follow this to remove the profile.
>1). Logon the Exchange server by using another admin account.
>2). Open Control Panel, select System.
>3). Select Advanced tab and click the Settings button of User Profile.
>4). Delete the Profile of user which encounters this issue.
>5). Click OK.
>6). Restart the server and logon it by using Administrator account.
>
once this is done, logon with your administrator account and try the tools again, they should work.tn
Paul Gartner

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

BS not available to assign in Integration Directory

Similar Messages

Maybe you are looking for