Cannot make rman backup - ORA-19501

Hello,
database and grid infrastuture 11.2.0.1 in Solaris X86
I am trying to make an rman backup of 2 databases located in ASM but when I try it I have the following error:
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/08/2011 15:38:04
ORA-19501: read error on file "+DG/prd.dbf", block number 28544 (block size=8192)
ORA-15081: failed to submit an I/O operation to a disk
ORA-15081: failed to submit an I/O operation to a disk
The alertlog of the database, when I run the rman has the following errors:
ORA-27063: number of bytes read/written is incorrect
WARNING: IO Failed. group:2 disk(number.incarnation):0.0xf0f2117f disk_path:/dev/rdsk/c5t60060480000290104585533031374538d0s6
AU:7063 disk_offset(bytes):7406092288 io_size:1048576 operation:Read type:asynchronous
result:I/O error process_id:14808
WARNING: failed to read mirror side 1 of virtual extent 139 logical extent 0 of file 273 in group [2.4251116087] from disk DG001 allocation unit 7063 reason error; if possible,will try another mirror side
ORA-15080: synchronous I/O operation to a disk failed
WARNING: failed to write mirror side 1 of virtual extent 139 logical extent 0 of file 273 in group 2 on disk 0 allocation unit 7063
My suspicious was problems with ASM but I have no errors in ASM. All disks are OK and the databases are working fine.
I runned dbverify against the database datafiles and no problems at all.
The problems seems like the Bug 9068033: RMAN BACKUP FAILED INTERMITTENT ORA-19501 ORA-2706, or bug 8510426 but I can't see any solution in metalink and this bug probably aplies to 10g and not 11g.
Can you please help me out?
Thank you.

The errors look like problems in the I/O system, I don't think there's block corruption from Oracle's point of view. Nevertheless you may check which object owns block 28544 in datafile +DG/prd.dbf.
select file_id from dba_data_files
where file_name = '+DG/prd.dbf';
SELECT SEGMENT_NAME, SEGMENT_TYPE
FROM DBA_EXTENTS
WHERE FILE_ID = <file_id from above>
AND 28544 BETWEEN block_id AND block_id + blocks;
It may be the block belongs to nothing, but there's still a physical defect. I remember a problem where RMAN complained about a bad block, but no issues in the database business. The reason no object owned this block, so the database did never access it.
Werner

Similar Messages

ORA-19806: cannot make duplex backups in recovery area

Hi all,
I multiplex my archived log files in 2 places and I ran a backup job via the Enterprise Manager, below is the code generated:
$rman_script="backup incremental level 0 cumulative device type disk tag 'Weekly_Full_Backup' database;
backup device type disk tag 'Weekly_Full_Archives' archivelog all not backed up delete all input;
allocate channel for maintenance type disk;
delete noprompt obsolete device type disk;
release channel;
&br_save_agent_env();
&br_prebackup($l_db_connect_string, $l_is_cold_backup, $l_use_rcvcat, $l_db_10_or_higher, $l_backup_strategy, "TRUE");
my $result = &br_backup();
exit($result);
I actually have the backup but at the same time have this error:
ORA-19806: cannot make duplex backups in recovery area
And it was supposed to delete all the Archived logs but they were not deleted.
Can someone help please?
Thanks in good anticipation.
Creems

It is not possible to duplex backup sets to the flash recovery area.

Time machine cannot make a backup

I use Mountain Lion 10.8.4. Recently my Time Machine started to behave wierdly: when backup is going, expected backup size is always by few GB larger than completed part. So that at one point of time it's 70 of 74 GB's done, after that it's 71 of 75 and so on until backup volume runs out of space.
Reported backup size for my system (inside time machine configuration, with some directories excluded), is about 75 GB's. When the backup is failing, it gets as high as 200+ GBs.
For me it looks like some kind of hard link directory loop what "generates" data over and over.
I've already tried emptying the TM volume. Also the Disk Utility doesn't find any problem with volume (which is backupped) data.
What's the best course of action in this kind of problem solving?
Some logs:
Starting automatic backup
Backup failed with error: 19
Starting automatic backup
Attempting to mount network destination URL: afp://[email protected]/TimeMachine
Mounted network destination at mount point: /Volumes/TimeMachine using URL: afp://[email protected]/TimeMachine
Disk image /Volumes/TimeMachine/MacBook Pro - Yury.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "SSD HD" (mount: '/' fsUUID: 4DDFD444-D060-3885-BF8B-3E75C6CBBF34 eventDBUUID: BB319D29-3CE3-4BE7-A684-B7B56413FCFE)
Warning: Bytes to copy estimate was negative (-8395032716)
Found 1511567 files (104,9 MB) needing backup
104,9 MB required (including padding), 8,6 MB available
Ejected Time Machine disk image: /Volumes/TimeMachine/MacBook Pro - Yury.sparsebundle
Compacting backup disk image to recover free space
Completed backup disk image compaction
Starting automatic backup
Network destination already mounted at: /Volumes/TimeMachine
Disk image /Volumes/TimeMachine/MacBook Pro - Yury.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Forcing deep traversal on source: "SSD HD" (mount: '/' fsUUID: 4DDFD444-D060-3885-BF8B-3E75C6CBBF34 eventDBUUID: BB319D29-3CE3-4BE7-A684-B7B56413FCFE)
Warning: Bytes to copy estimate was negative (-8395032716)
Found 1511567 files (104,9 MB) needing backup
104,9 MB required (including padding), 8,6 MB available
Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/MacBook Pro - Yury/2013-07-12-142217.inProgress/19245C51-4270-4E30-936E-0A20D8CACAC3 containing 168,68 GB; 168,69 GB now available, 104,9 MB required
Deleted 1 backups containing 168,68 GB total; 168,69 GB now available, 104,9 MB required
Indexer unavailable due to disk space.
Stopping backup.
Error: (-34) SrcErr:NO Copying /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/Resources/A dobeCrashDaemon.app/Contents/_codesignature/CodeResources to /Volumes/Time Machine Backups/Backups.backupdb/MacBook Pro - Yury/2013-07-12-142217.inProgress/8D4C46F6-145E-4D54-97D2-13311BFD16DE/SSD HD/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/a/resources/A dobeCrashDaemon.app/Cont

Triple-click anywhere in the line below on this page to select it:
diskutil list | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Need Advice on RMAN backup script

Hi;
Can any one advice if any error or guide to make RMAN backup proper :
Backup Policy are:
1.     0 level backup
2.     current log file is arvhived before backing up
3.     backup whole database (datafiles)
4.     backup separate control file
5.     backup is done on disk
6.     control file auto backup ON
7.     only 7 days archive log are need to be preserve ; old need to be deleted
### one time paramters seting
RMAN> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN> CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'O:\rman\backup\Auto_Ctrl_weekly_%F';
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
### Command for weekly 0 level backup
run {
allocate channel c1 type disk;
sql 'alter system archive log current';
backup incremental level 0 tag = weekly_database format 'o:\rman\backup\full_weekly_%d_%s_%p_%t'(database);
release channel c1;
configure controlfile autobackup format for device type disk to 'o:\rman\backup\auto_ctrl_weekly_%f';
allocate channel c1 type disk;
backup tag = weekly_arch archivelog until time 'sysdate-7' format 'o:\rman\backup\archive_weekly_%d_%s_%p_%t';
delete archivelog until time 'sysdate-7';
release channel c1;
Regards
Smith

Dear Pierre F.;
Actually, I just added in my backup plan to have daily backup through RMAN, instead of COLD backup.
I have planned to take cold backup once a week. here is the side of data:
*** datafile 410
*** size of database : 86 GM
*** relog files size : 250MB
*** daily archive logs are : 250MB * 4(number of files) = 1GM aprox.
yes, time constraint is there; just because of the size of database. and we r going for 24/7
Is this script going to run only one per week ?
Ans: no I this was level 0 backup; i will take level 1 incremental backup with same script daily too.
Do you have any other RMAN script ?
ANS: no, I will modify same script for incremental.
after local copy of backup all backup files (RMAN) will be copy over network to backup server or we can install LTO tape device to copy directly from database server.
kindly advise me I am new in RMAN.
regards;
SMITH

Oracle EBS R12 - 11.2.0.2 - Logical Standby Database & RMAN backups

Hi all,
I have Oracle EBusiness Suite R12 running on 11.2.0.2. Our organization used to have most of the business in North America, South America and Europe; but now we are also in Australia, China and Indonesia. Previously running large reporting batch jobs and RMAN backups at night time in USA was feasible but now that is beginning to show up as performance issue for some countries.
I was thinking would it make sense to have a Active Data Guard logical standby database on a separate server in the same US based data center where we have our main servers and use that logical standy database for reporting and RMAN backups. I am especially concerned about RMAN backups. Would I be able to make RMAN backups from the logical standy database and somehow use those to recover our primary database if some issue happens?
Any thoughts/suggestions?
Thanks all,

Active Data Guard only deals with physical standbys. If you are using a logical standby you can always open the database without using Active Data Guard option.
http://docs.oracle.com/cd/E11882_01/server.112/e25608/rman.htm#sthref846 says that:
>
Backups of logical standby databases are not usable at the primary database.

Cannot make Recovery DVDs for the G580 with Windows 8

I notice that Windows 8 Notebooks are no longer being sold with Licenses affixed to the underside. So if anything goes wrong (e.g. we have to replace the HDD at a later date) we cannot just use a Windows 8 disk to restore the operating system.
This means it is important to make sure we have recovery DVDs.
With previous versions One Key Recovery had an option to make restore DVDs - it misses that option with Windows 8.
Phoned Lenovo support who said that we should make the DVDs through the Windows Backup system, which again is fine but on both Lenovo's I have tried it on Windows 8 cannot make a backup to DVD. Also even if we could make the windows backup or system repair disks they would not allow a complete factory restore to a brand new HDD.
How do we make Recovery DVDs that would be bootable and would restore the Operating System to a brand new HDD if the worst should happen and the existing HDD suffered unrecoverable failure? So far the only option that has come up from my various phonecalls is "buy a set of recovery discs for £25-£35 .... which would be a bit unfair having only had this 2 days.
Solved!
Go to Solution.

thanks for the feedback.
Could you please check out the following link and see if it contains a possible solution, I am aware it states only Think products in the compatability list but there are "cross-over" points where something could be of relevance to other Lenovo products.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024
thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

RMAN backup from remote pc !

Dear Friends ,
In my database Linux server I have no enough space to take RMAN backup since my database size around 90 GB .
So in this moment I want to take the rman backup form remote machine(From windows or Linux), where all the datafile backup of my Linux database server also goes to the remote machine . is it possible to do ?
Or is there any way to take RMAN backup(datafile,controlfile,spfile backup from server to client) from remote machine without increasing the HDD space of the Local server ?
Waiting for your kind reply ... ...

In my database Linux server I have no enough space to take RMAN backup since my database size around 90 GB .
So in this moment I want to take the rman backup form remote machine(From windows or Linux), where all the datafile backup of my Linux database server also goes to the remote machine . is it possible to do ?
Or is there any way to take RMAN backup(datafile,controlfile,spfile backup from server to client) from remote machine without increasing the HDD space of the Local server ?You can't make RMAN backup remotely.
Use third party tools like data-protector or use Oracle secure backup to make backups other than local server.

Error , ORA-19809 & ORA-19804 While restoring RMAN backup .

Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AM

Hi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav

RMAN备份报错ORA-19501,DBV验证报错DBV-00102

存储发现有异常，厂商决定要重做raid
现在要进行数据备份，exp已备份无异常
rman备份时报错：
RMAN> backup validate datafile 53;
启动 backup 于 2012.11.05 14:41:26
分配的通道: ORA_DISK_1
通道 ORA_DISK_1: sid=524 devtype=DISK
通道 ORA_DISK_1: 启动全部数据文件备份集
通道 ORA_DISK_1: 正在指定备份集中的数据文件
输入数据文件 fno=00053 name=E:\TOEC01.DBF
RMAN-03009: backup 命令 (ORA_DISK_1 通道上, 在 11/05/2012 14:41:29 上) 失败
ORA-19501: 文件 "E:\TOEC01.DBF", 块编号 12545 读错误 (块大小 = 8192)
ORA-27070: 异步读取/写入失败
OSD-04016: 异步 I/O 请求排队时出错。
O/S-Error: (OS 1) 函数不正确。
关闭异步I/O同步
alter system set disk_asynch_io=FALSE scope=spfile;
重启实例
RMAN> backup validate datafile 53;
启动 backup 于 2012.11.05 15:24:53
使用通道 ORA_DISK_1
通道 ORA_DISK_1: 启动全部数据文件备份集
通道 ORA_DISK_1: 正在指定备份集中的数据文件
输入数据文件 fno=00053 name=E:\TOEC01.DBF
RMAN-03009: backup 命令 (ORA_DISK_1 通道上, 在 11/05/2012 15:24:57 上) 失败
ORA-19501: 文件 "E:\TOEC01.DBF", 块编号 11905 读错误 (块大小 = 8192)
ORA-27070: 异步读取/写入失败
OSD-04006: ReadFile() 失败, 无法读取文件
O/S-Error: (OS 1) 函数不正确。
E:\>dbv file=TOEC01.DBF blocksize=8192
DBVERIFY: Release 10.2.0.1.0 - Production on 星期一 11月 5 15:29:23 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
DBVERIFY - 开始验证: FILE = TOEC01.DBF
DBV-00102: FILE (TOEC01.DBF) 在 verification read 操作 (-2) 期间出现文件 I/O 错误
os：Windows2003 x64
db：oracle10.2.0.1.0 x64
求解，怎样能使rman继续完成备份？

ORA-19501: 文件 "E:\TOEC01.DBF", 块编号 11905 读错误 (块大小 = 8192)
ORA-27070: 异步读取/写入失败
OSD-04006: ReadFile() 失败, 无法读取文件
O/S-Error: (OS 1) 函数不正确。
DBV-00102: FILE (TOEC01.DBF) 在 verification read 操作 (-2) 期间出现文件 I/O 错误
说明该数据文件的 11905 block存在物理上的损坏，无法被读取
advise:
1. 尝试cp 该文件到其他位置看是否能修复问题
2. 若步骤1 无效则在步骤1的基础上对该数据块做blockrecover,当然这需要该数据文件的全量备份和归档日志
3. 若没有备份考虑用 dbms_repair 包对该块标记为 corruption
建议你先查一下是否只有这样一个物理坏块，这个块具体属于什么segment，就EXP看应当是TABLE，
那么可以考虑用 10231 event + CTAS 重建该表，并DROP 原表后再 exp
改造Oracle中文技术生态环境！
*<font color="red" size="2" face="courier">如果觉得本回复有意义，请点击本条回复右手边的Correct按钮，谢谢！</font>*
如何在OTN中文技术论坛提一个问题？
论坛礼仪需知及学习oracle的方法论
Maclean Liu
Oracle Database Administrator
Oracle Certified 10g/11g Master
www.askmaclean.com
请把需要上传的文件发给我
有问题请去OTN中文论坛开个帖子我会回复地址：http://www.otncn.org
如果需要发送附件，可以直接发邮件到 [email protected]

Rman backup error: ORA-19502

I am running a rman backup script with incremental 1 level as
backup as backupset incremental level 1 cumulative device type disk tag 'Baan_bkup$LEVEL_0' database;
recover copy of database;
backup device type disk tag 'Baan_bkup$LEVEL_0' archivelog all not backed up;
backup archivelog until time 'sysdate-6' delete all input;
delete noprompt obsolete device type disk;
It has run almost two weeks and last night it showed this error and failed
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/08/2006 03:02:14
ORA-19502: write error on file "/dbrecovery/flashback/goi1rkdm_1_1", blockno 164865 (blocksize=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 164865
Additional information: 782336
Linux Error: 2: No such file or directory
I checked the df -k and I still have about 6% space in my /dbrecovery disk, a separated space, and I did not find the file indicated either. So was still possible the space is full? or others reason?
I used the "delete obsolete"command in rman but nothing can be deleted.

It seems your filesystem cannot handle large files (> 2G). Use 'maxpiecesize' option of 'allocate channel' command to limit the filesize.
Werner

RMAN Backup error:ORA-04030: out of process memory

Hi,
Our RMAN backup is failing with below error:
===========================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 05:31:33
ORA-04030: out of process memory when trying to allocate 82444 bytes (pga heap,control file i/o buffer)
=============================
Please suggest
Thanks and Regards

We upgrade our catalog database(Linux) to 10.2.0.4 and our target database is 10.2.0.3(Windows),
we executed upgrade catalog twice and then when we again tried to execute the below command
rman sys/syspwd@targetdb catalog rman/rman@rmancat
Recovery Manager: Release 10.2.0.4.0 - Production on Sat May 22 15:10:36 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current
connected to target database: WEBCT (DBID=3699379059)
connected to recovery catalog database
RMAN>
=======================
Still we are getting this error
and our backup falied with below errors:
======================
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.03 in TARGET database is not current PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.03 in TARGET database is not current connected to target database: WEBCT (DBID=3699379059) connected to recovery catalog database
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/22/2010 15:09:44
ORA-06550: line 1, column 14:
PLS-00306: wrong number or types of arguments in call to 'VALIDATEARCHIVEDLOG'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
==========================
Please suggest

RMAN backup in RAC failing with error ORA-19566

Hi all, i have 2 node RAC and i am trying to take rman backup of the database which is in ASM filesystem.
There is a corruption in SYSAUX file and rman is failing to take backup of the sysaux datafile and error thrown at the end like
piece handle=/home/oracle/orabackup/BLOOM_LVL0_20120627_1qnejueh_s58_p1 tag=TAG20120627T185538 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:56
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/27/2012 18:56:17
*ORA-19566: exceeded limit of 0 corrupt blocks for file +DATA/bloom/datafile/sysaux.257.775475317*
Then i tried to validate the backup in rman of the datafile sysaux nad fired the following query
SQL> SELECT * FROM v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
3 32011 1 0 ALL ZERO
3 32049 40 0 ALL ZERO
3 32034 1 0 ALL ZERO
3 28964 1 1399837 LOGICAL
3 32015 2 0 ALL ZERO
and found all the blocks in the table WRH$_SQL_PLAN.
Then dropped the table, and tried to take backup of the database and it is failing again with the same error..
ANY SOLUTION TO TAKE BACKUP OF THE DATABASE.
anyhow we can SET MAXCORRUPT FOR DATAFILE 3 to value, but does this works all time...
Thanks in advance,
TEJAS

Both are good suggestions, but
Osama-mustafa wrote:
RMAN> blockrecover datafile 5 block 2684; -- Fix Eror That ship has already sailed:
TEJAS_DBA wrote:
And Yes this is the first time i am taking backup on the database.And:
Osama-mustafa wrote:
Or Skip Option
Like
RMAN> RUN{
2> SET MAXCORRUPT FOR DATAFILE 1,3 to 1;
3> BACKUP DATABASE;
4> }The OP was aware of this option and hopefully was able to get at least some sort of a backup eventually. But as for the dropped WRH$_SQL_PLAN, TEJAS is, I will use the word "braver" than most. And as often is the case, Dan Morgan offered the only bit of sensible advise.
Open an SR.
Good luck.

Rman archivelog backup fails with rman-03002,ora-19563

Hi,
D:\ Oracle- -\BIN\RMAN TARGET / NOCATALOG
RMAN> backup archivelog all;
RMAN-03002: Error with backup command on 06-25-2013
ORA-19563: Header-Validation is not successful.
fails with the given errors.
11.2.0.2 PROD DB on Windows Server 2008 R2 Enterpriise.
When I issue BACKUP INCREMENTAL LEVEL 0 DATABASE; it works fine. but with archivelog it is creating problems. Unfortunatly, I have not found exactly the same problem on google and on Oracle support.
The DB is using INIT.ORA and last time when I switched the mode to archive log mode I set the parameter like SCOPE=MEMORY as SPFILE was not in use and ALTER SYSTEM with SCOPE=BOTH FRA destination and size, but after the DB restarting of course that setting is gone and I am having these problems.
Please suggest.
Thanks a lot.
Best Regards,

Hi,
Thanks a lot.
I don't think that archivelogs were relocated, except I changed the location yesterday.
As I wrote at the start that because of INIT.ORA file being in use instead of SPFILE. I set DB_RECOVERY_FILE_DEST, DB_RECOVERY_DEST_SIZE after changing the DB mode to ARCHIVELOG, but DB was restarted by somebody else, and as the parameter changing was NOT PERMANENT, it rollback.
LOG_ARCHIVE_DEST was set to d:\oradata\db with archivelog mode but db_recovery_file_dest and size was set to 0. Now here, I have no idea that whether archivelogs were not being backed up or deleted physically, but I guess that as log_archive_dest parameter is deprecated and mode is set to archivelog with no real ARCHIVELOG DESTINATION. Please correct me if I am wrong or totally wrong :-)
I performed DELETED EXPIRED ARCHIVELOG ALL, and it deleted 49 EXPIRED objects.
Now CROSSCHECK ARCHIVELOG ALL and LIST ARCHIVELOG ALL shows nothing.
LIST BACKUP OF ARCHIVELOG ALL has of course those 49 archivelog gap.
Could you please tell the impacts of those 49 missing archivelogs. Retention policy is set to 14 days. I mean the risk is for 14 days right? As anyhow, the older backups are being DELETED according to retention policy of RMAN.

How to make hot RMAN backup as consistent in 10g?

Hi,
While cloning database using rman hot backup it asking archivelog files. how to recover easily? How to make hot RMAN backup as consistent in 10g?
Thanks,

user2017273 wrote:
Hi,
While cloning database using rman hot backup it asking archivelog files. how to recover easily? How to make hot RMAN backup as consistent in 10g?
Thanks,Take backup with "plus archivelog" command. This will require archived redo log files and automatically apply them

Resize online redolog files, make RMAN obsolute backups as usable

Dear Guru's,
I have following doubts, please clarify me on the same. thanks in advance
1. why can not we resize online redolog files instead of re-creating the same with large size and remove the older onces.
2. How can we make RMAN obsolute backups as usable ?
Thanks.

vasuoracledba wrote:
Hi Aman,
Thanks for replay...
Regarding RMAN, plz look into below issue.
I configured RMAN backup recovery window of 15 days. after 15 days the backupsets which were older then 15 days are obsolute. now i have to restore the backup of 15 days older(obsolute backupsets) backupsets to the database. but when i do restore it defaulty takes latest backupsets other then obsolute onces.
how do i restore older(obsolute backupsets) backupsets to the database?
If i used the CHANGE cmd, how to do that.
RMAN> change backupset tag weekly_backup_20052013_02:45 _______________
do i make latest backupsets unavaliable to restore the older once....
RMAN> change backupset tag weekly_backup_20062013_02:00;
Thanks in advance...........
Obsolete backups are always usable, until you delete them with DELETE OBSOLETE.
If you want to restore from a backup other than the latest, use an until clause:
run {set until time = 'sysdate - 15';
restore database;}

Cannot make rman backup - ORA-19501

Similar Messages

Maybe you are looking for