Cannot manually classify packets on Cat3560

I am trying to manually classify a video stream from one IP to another, and tag it with DSCP AF41. I am using a Cat3560, software version 12.2(25)SEC2.
The source of the video transmission is the entire 10.1.10.0/24 network. So I have an ACL:
access-list 1 permit 10.1.10.0 0.0.0.255
Then I have a class map:
class-map match-all axis-video
match access-group 1
The I have a policy map:
policy-map axis-video-policy
class axis-video
set dscp af41
Then I have applied the policy-map to the interface:
switchport access vlan 10
switchport mode access
switchport port-security
switchport port-security aging time 2
switchport port-security violation restrict
switchport port-security aging type inactivity
service-policy input axis-video-policy
macro description cisco-desktop
spanning-tree portfast
spanning-tree bpduguard enable
But when I use a sniffer to look at the transmissions going back and forth from the port, everything is still coded 0x00.
Can anyone please help?

make sure you have "mls qos" turned ON globally.
See this URL for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225sec/3560scg/swqos.htm#wp1044737

Similar Messages

  • TS1347 I cannot manually add an appt to my iPhone 4S calendar

    After I updated my iPhone 4S with new operating sys I cannot manually add events to my calendar.

    It means that you have too many tasks running on your phone (in the background) and need to close them down. You do this by deleting the tasks from the multi-bar at the bottom of the phone screen.
    To delete tasks off the multitask bar, click the button on the bottom/front of the phone twice quickly. This will dislay just the multitask bar at the bottom of the screen (generally you see Music, Phone, Mail, and Safari here). Then click one of those tasks and you'll see all the items in your multi-task bar start to wiggle. You can scroll across from right to left to see all the apps you still have running, even if you aren't using them. click the X on each of these to close the apss -- this will not delete them from your OS. I did this and am now able to create Calendar events again!

  • Cannot Manually Add Top Sites

    This problem is driving my nuts.
    On both of my Macs, I cannot manually add URLs to Top Sites as I used to be able to. Dragging a URL into a Top Sites window (in "Edit" mode), does nothing. It used to allow the URL to be dropped in an available space, manually creating a Top Site.
    This isn't working on my 2011 MacBook Pro, and I was curious to see if it would work on my new Mac Mini that I just got, out of the box....nope.
    Both Safari 6.0.1 and OS X 10.8.2
    Reset Safari > Reset Top Sites has no effect.

    I have the same problem.
    It would be nice to have a suggestion for solving this problem.

  • Error cannot be classified (unknown exception triggered) in smartform

    Hi,
    When i execute the smartform. i am getting error message "Error cannot be classified (unknown exception triggered) "
    error message ID : SSFCOMPOSER
    error Message No.: 003.
    None of the smartforms are working. Please provide me the solution for this.
    Regards,
    Sree

    Hi,
    Please check the OSS note 567778.
    To check it. Goto snote tcode, then follow the path: Goto-> Download SAP note -> Give the note number 567778
    After that It will say that note has been downloaded. Now follow the path: Goto-> SAP note Browser, here give the note number again.
    Check the implementation status.. Let me know....
    Is it solving your problem?
    Regards,
    Lokesh.
    Edited by: Lokesh Tarey on Apr 22, 2010 10:47 AM

  • Cannot manuall update files on IPAD in Itunes 10.5.1

    I Cannot manually update any files on my IPAD from ITUNES after upgrading to 10.5.1. Message just says preparing to update, but no files ever get moved onto the IPAD. Please help.

    Thank you Charles
    I found this out whilst playing with iTunes...
    Go to Amazon or some other site to get the correct album artwork.
    Right-click and "Save Image As", saving to desktop.
    In iTunes Music Album, right-click on the album and slect "Get Info" from the drop-down.
    On the rhs at the bottom is a square box that says "Artwork" (as you said above).
    Right-click in the box, select 'paste' and then 'OK'.
    Seems to work without having to select all the titles in the album first.
    Hope this helps,
    RB

  • Windows 10 upgrade from 7 Pro: No internet and cannot manually install drivers for adapters...

    PC: HP Proboook 4510SPrevious OS: Windows 7 Pro 32-bitNew OS: Windows 10 Pro 32 bit Issue:  I upgraded to windows 10 from 7 pro and some of my internal devices dont have drivers. I could fix this issue quickly if two of them were not my ethernet card and wireless adapter.  Right now I only have 2 adapters listed under network adapters and both are virtual VM ethernet cards.  Neither of these can establish a connection through a router I know is working on other laptops in my house.  The error I get is that the IP address cannot be resolved.  The odd part is that when I look at the details for the VM ethernet cards it shows a good DHCP IP and subnet....TX/RX is no good though as it only shows sending packets and not recieving them.   I tried to manually install the windows 7 drivers from a USB stick. I got them off of HP's website. I installed them but it did nothing.  However, I was having no luck and restarted and they momentarily showed up in the adapters list (under network settings in control panel).  Then as soon as I tried to enable them they went away and I still have no internet.  Not sure what is going on or what to do.  If I cannot install the HP drivers and get them to work, and I cannot connect to the internet to let windows fix the problem I seem to be stuck.. Please Help.

    Hello , I understand that your secondary DVD drive is not recognizable as an optical device on your desktop computer after upgrading to Windows 10. I would be happy to assist you in this matter! When you examine the installed drives in the BIOS, does the 2nd DVD drive appear? What brand are the two DVD drives? What is the product number for your computer? Below is a is an HP Support document that will demonstrate how to find your computer's product number. 
    How Do I Find My Model Number or Product Number? In the meantime, I recommend following the steps in this document on HP PCs - Updating Drivers and Software with Windows Update (Windows 10, 8). This should help to install any possible updates required to run the secondary DVD drive. Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards

  • Cannot manually manage music and videos without erasing and syncing first

    I have an iPhone 3G bought new from the Apple store using 2.1. Using iTunes 8.0 and checking the "Manually manage music and video" checkbox, iTunes prompts me to "Erase and Sync", no other option is available to me. It was the same when using version 7.7 as well.
    I'm not syncing to another computer, it's the same MacBook I've had for almost a year. How do I get the Library Persistent ID in iTunes to match the iPhone. I have the ID from the iTunes Music Library.xml file. I just need to know where the matching file for the iPhone is so I can make them match.
    The ID doesn't match because I had to rebuild my drive a month ago and my question to Apple (actually Steve) is why can't I sync the other way from the phone to the computer.
    Why does my library on the phone have to be wiped out. Who had the warped thought to come up with this genius idea.
    Message was edited by: ep1curus

    I cannot express how disappointing this was for me to find out.
    I want my music to be mobile, I don't want to have to copy it to every computer I want to listen to it on. I want to listen to it from the device, and be able to buy a new album at work or at home. This is a major disappointment for me, as every other device I have owned including my iPod Touch had this capability. I could authorize 5 machines and manually sync, and the music on that device could be played and managed on those authorized machines. For example, my wife has her own music collection, and I have mine, but we have a media center connected to our flat-screen in the living room, that we use for playing music when we are entertaining guests, and with our old iPods and iPod Touch devices, we could unplug one of our devices and plug the other persons in and listen to music from both our libraries without copying the music to that computer, as long as we authorized that machine for the both of us. Now with our iPhones there is no way to keep our seperate librarys and be able to play music on multiple computers in our house and at work, which we have always been able to do until our iPhones. The whole point of the iPhone for me was to be able to combine two devices and now because of the lack of this feature I still have to keep all our iPods around too... Dumb. I almost took our phones back because of this, and if apple doesn't fix it, I probably won't buy another. They should have at least mentioned this little fact before selling the devices to us. I know it's a different device, but it's similar enough that you expect it to work the same as the iPod and iPod Touch. It's not like I am wanting to be able to copy music from the device to multiple machines, it's exactly the opposite... I just want to be able to copy music to the device and listen to it at home and at work... why all apples other devices do this, and the iPhone doesn't is completely perplexing to me, and a serious oversight on there part. This pill would not be so hard to swallow if I had been warned about this prior to dropping almost a grand for iPhones for myself and my wife, expecting what I saw as a more advanced device to work at least as good as the other similar devices I own did.

  • Cannot manually manage music

    I recently had to replace my hard drive, and I am just now trying to manage my iPhone music again through iTunes. At the moment, I cannot manage my music. When I go into the summary page and click "Manually manage music and videos," then Apply, I get the message "This iPhone is synced with another iTunes library. Do you want to erase this iPhone and sync with this iTunes library?" The only choices which appear are Cancel or Erase and Sync. I don't want to erase my iPhone, but I do want to be able to manage my music...what do I have to do to be able to select the manually manage music option without erasing my iPhone?

    Well, without a backup, you're gonna have to use third party software to first put your content into itunes BEFORE you sync. You can transfer purchased content, as I've said: File>Transfer Purchases. Music you ripped on your own will have to be transfered by third party software:
    http://www.wideanglesoftware.com/touchcopy/
    Like I said, when you first sync or manually manage, all itunes content on your phone will be erased & replaced with the content from your "new" computer. There is no way to avoid this. Backing up is your only protection, as the iphone is NOT a backup device.

  • Cannot manually print with Mac OSX 6 and ID CS3

    I installed Mac Snow Leopard OSX yesterday, and now I cannot make InDesign CS3 files print manually. When I go to the printer dialog box and set Manual Print, then return to the ID Print Dialog and hit PRINT, I get the autofeed paper printed, not the manual. What happened?
    Thanks,
    - Mike Yanega

    No, but I will download that now. Thank you.
    - Mike Yanega
    Message was edited by: BowfinBoy
    I upgraded to the 10.6.6 version of the OS and I am still getting the same symptoms. I cannot seem to get Manual Printing from InDesign CS3.
    I just tried printing from my Mail and cannot do that Manually either, so apparently there is a print driver issue?
    - Mike

  • Cannot manually backup iPad mini or update iOS 7 over wifi or iTunes.

    Hi all,
    I delayed updating my ipad mini because I'm lazy but have a lot of app updates so thought it was time. My iPhone 4s went fine but my iPad is frustrating me to no end. I cannot update it wirelessly. When I press General > Software Update, it fails to load any updates after checking for ages and displays the message "unable to check for update" and says an error occurred. When I plug it into my Mac, it tries to set it up as a new ipad or wants to restore it from my backed up iphone data. It gives me no opportunity to back it up manually through itunes. Both my macbook and itunes are up to date. This is a new macbook and my first macbook so my ipad has never been plugged into it before but my iphone worked.
    The only thing I can think of that might be a problem is that my mac is plugged into an ethernet cable and I set it to be a hotspot for my ipad.
    Does anyone have any ideas? Thanks in advance!

    You can't go back. Period.
    But carefully explain what your issues might be. Someone here will provide assistance. But general statements of "WiFi doesn't work well" doesn't give us enough information to even begin to help you.

  • Cannot manual adjustment unit selling price for Retrobill order

    Dears,
    I try formpersonalzation to set to update allowed and alterable,but still cannot update unit selling price?
    there is a message:
    Get_manual_adjustment#2 ORA-01403:no data found in Package oe_order_adj_pvt Procedure oe_line_adj.calulate_adjustments
    Edited by: user6911393 on 2011/5/18 下午 9:00
    Is there method can find the way to adjustment unit selling price manually fro Retrobill order?
    Thank you very much!

    Dears,
    I try formpersonalzation to set to update allowed and alterable,but still cannot update unit selling price?
    there is a message:
    Get_manual_adjustment#2 ORA-01403:no data found in Package oe_order_adj_pvt Procedure oe_line_adj.calulate_adjustments
    Edited by: user6911393 on 2011/5/18 下午 9:00
    Is there method can find the way to adjustment unit selling price manually fro Retrobill order?
    Thank you very much!

  • Key provided but cannot decrypt wireless packets

    Hi,
    I'm working on a case for a Hospital and seeking advice as client is pretty unhappy with lack of resolution.
    Cisco 5508 WLCs HA-SSO running latest 7.6.130. Cisco 3602i APs.
    After an upgrade to the WLC code some time ago and/or network upgrades, the client's wireless pump devices stopped communicating. We have capture from NetMon v3.4 and capture shows the pumps de-authenticating, but TAC claims they cannot decrypt packets even though key was provided and we can login from a laptop with that same key no problem.
    Any observations, suggestions, recommendations appreciated.
    Thanks

    Symptom : Cisco WLC using Releases 7.3 and 7.4 fail authenticate One Time Password (OTP) users when attempting to authenticate to the Cisco WLC using TACACS+. The following debug output is displayed when the debug aaa tacacs enable command is entered on the WLC CLI:
    TPLUS_AUTHEN_STATUS_GETPASS auth_cont get_pass reply: pkt_length=25 processTplusAuthResponse: Continue auth transaction No auth response from: <SERVER IP> retrying with next server Preparing message for retransmit. Decrypting first Forwarding request to <SERVER IP> port=4900 AUTH Socket closed underneath No auth response from: <SERVER IP> retrying with next server Preparing message for retransmit. Decrypting first Forwarding request to <SERVER IP> port=4900 AUTH Socket closed underneath Exhausted all available servers for Auth/Author packet
    Conditions : Cisco WLC using Releases 7.3 and 7.4; TACACS+ used for Management User Authentication; OTP used for TACACS+ static passwords are not affected.
    Workaround : Extend the TACACS+ Management Server Timeout value by entering these commands:
    config tacacs auth disable server-index
    config tacacs auth mgmt-server-timeout server-index
    config tacacs auth enable server-index

  • Cannot manually maintain result analysis data

    Hi,
    I am running result analysis for sales order(sales order is a cost object). after calculation of result analysis, and when I click on maintain manually button all the values are grayed out and I cannot maintain the values manually.
    Please let me know what could be the problem
    Thanks
    Naveen

    Hi,
    I have checked all the result analysis settings that I know of including the expert mode in the valuation method with no avail.
    can you please let me know what could be wrong?
    Thanks
    Naveen

  • New 16GB iTouch - cannot manually drag/drop songs

    I just purchased a new 16GB iTouch this past wkd from the Apple store. (As background I have previously owned the 1st generation and latest iPod nanos). After reading some of the posts, I decided not to upgrade the software to v3.0.
    I connected the iTouch to my computer, and it is recognized by iTunes. I unchecked any related "automatically sync" features and made sure that "manual sync" was turned on. However, I still cannot seem to "drag and drop" songs from my Music Library to my iTouch; I also cannot "drag and drop" any of my playlists. I have not even tried to bother with my photos. Also, please note, my iTunes works just fine with both of my iPods.
    Please help!!! Am I having this problem b/c I am not upgrading the iTouch software to the new version?

    roaminggnome - thanks for your quick reply. Apologies, I should have been more specific in my post. So that my songs would not be automatically synched, I had previously checked the box under devices/my ipod/summary/manually manage music" - I also had done so for both of my old iPods.
    I already downloaded the manual and read thru a bunch of older posts and I could not find any reference to this "drag/drop" issue.

  • Qos pre-classify not classifying packets correctly.

    This is a little 831 router (12.4.4T) with one private and one public interface connected to a 1000/256 ADSL circuit. There is a VPN to the Head Office with a GRE tunnel and EIGRP.
    The Tunnels bandwidth is set to 1544 since there is a frame-relay backup and the service provider hasn’t configured their parameters correctly, but this shouldn’t affect the QoS.
    What’s happening is that we can only see a very small amount of traffic being classified correctly and all other traffic seems to match the last (ip any any) access-list. The fact that the data is being classified seems to indicate that the qos pre-classify is working but we don’t know why it’s not matching the correct data classes.
    Any ideas would be greatly appreciated...
    router#sh policy-map int eth1
    Ethernet1
    Service-policy output: soho01-vpn-256
    Class-map: AC-CLASS-G1 (match-any)
    14110 packets, 2414498 bytes
    5 minute offered rate 9000 bps, drop rate 0 bps
    Match: access-group name AC-G1
    14110 packets, 2414498 bytes
    5 minute rate 9000 bps
    Queueing
    Output Queue: Conversation 73
    Bandwidth 128 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 1/60
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: AC-CLASS-G2 (match-any)
    0 packets, 0 bytes
    5 minute offered rate 0 bps, drop rate 0 bps
    Match: access-group name AC-G2
    0 packets, 0 bytes
    5 minute rate 0 bps
    Queueing
    Output Queue: Conversation 74
    Bandwidth 8 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 0/0
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: AC-CLASS-G3 (match-any)
    12 packets, 968 bytes
    5 minute offered rate 0 bps, drop rate 0 bps
    Match: access-group name AC-G3
    12 packets, 968 bytes
    5 minute rate 0 bps
    Queueing
    Output Queue: Conversation 75
    Bandwidth 32 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 9/558
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: AC-CLASS-G4 (match-any)
    1621 packets, 266028 bytes
    5 minute offered rate 0 bps, drop rate 0 bps
    Match: access-group name AC-G4
    1621 packets, 266028 bytes
    5 minute rate 0 bps
    Queueing
    Output Queue: Conversation 76
    Bandwidth 64 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 19/1240
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: AC-CLASS-G5 (match-any)
    9336 packets, 693246 bytes
    5 minute offered rate 1000 bps, drop rate 0 bps
    Match: access-group name AC-G5
    9336 packets, 693246 bytes
    5 minute rate 1000 bps
    Queueing
    Output Queue: Conversation 77
    Bandwidth 16 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 8248/511990
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: AC-CLASS-G6 (match-any)
    369616 packets, 79361172 bytes
    5 minute offered rate 164000 bps, drop rate 0 bps
    Match: access-group name AC-G6
    369616 packets, 79361172 bytes
    5 minute rate 164000 bps
    Queueing
    Output Queue: Conversation 78
    Bandwidth 8 (kbps) Max Threshold 64 (packets)
    (pkts matched/bytes matched) 310/24424
    (depth/total drops/no-buffer drops) 0/0/0
    Class-map: class-default (match-any)
    4750 packets, 285000 bytes
    5 minute offered rate 0 bps, drop rate 0 bps
    Match: any

    Someone please correct me if I am wrong but if you add the 5 minute offered rate for all your classes you are classifying about 175K worth of traffic throughout your service policy. If I am reading correctly your circuit is 256 up 1M down.
    From looking at your configuration it seems most of your traffic is matching the class named class AC-CLASS-G6. There is no access list defined for this class so essentially all traffic that hasn?t matched a previous class will match here. This explains why you?re not matching any traffic on the default class.
    It is recommended to only assign queues for up to 75% of the available bandwidth. IOS determines what this 75% is based on the bandwidth statement. Right now you have queues defined for all but 2K of your available bandwidth which means traffic that doesn?t match any of your classes will be tail dropped during times of congestion. I assume you are intending to do this based on the max-reserved-bandwidth command and the missing access list.
    When using qos-preclassify essentially what happens is the ToS bits are copied into the post gre or IPSEC IP header. In this case you are not matching based on DSCP marking you are matching on IP address so therefore when packets egress your E0 interface the post GRE or IPSEC IP header doesn?t have an address or type field that matches your class statements. If you were to mark traffic based on these classes with a DSCP marking (i.e. AF 31, 32, 33) at the inbound interface you could then copy these markings and provide the appropriate PHB on your egress interface E0.
    HTH
    RS

Maybe you are looking for