Cannot open VI file in edit mode.

I cannot open a VI project that I was working on. Every time I try to open the file it gives me a message that "not enough memory to complete this operation".
This is a large project and I need to be able to access the block diagram.
This happens when I try to open it in edit mode.
Thanks.
Message Edited by Minguccio on 01-06-2006 11:41 AM

Minguccio,
I've done some poking around and may have found some useful information. This error will ocurr if you have too many (and I mean a ton) of controls on the front panel. I haven't heard of this error since LabVIEW 5.1 though and we've upgraded the number of controls you can have on your front panel since then. However, try deleting some controls from your front panel to see if this helps out.
My investigation also lead me to tcp errors. Are you using tcp\ip anywhere in your programming? I found this discussion that may help out if that's the case.
Let us know what you find.
Best Regards,
Chris C
Applications Engineering
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Similar Messages

SharePoint 2010 and PowerPoint 2010: Open PPTX File in Edit Mode and Open PPSX in in Slide Show Mode

I have the following issue while opening PowerPoint PPTX file and PPSX from the Document ID link provided by SharePoint 2010.
Issue
Initially when I opened PPTX file from the DOC ID link from SharePoint 2010, it is opening up in Slide Show mode which is not how we want it to be.
For PPSX, it is opening in Slide Show mode which is what we wanted.
Thus, I did some research online and found this article at support.microsoft.com/kb/q299824 which requires some modification to the Registry of the client machine.
I did the change as follows
Open Registry
Look for “Computer\HKEY_CLASSES_ROOT\PowerPoint.Show.12”
Set BrowserFlags value to a
After the change, PPTX is opening in Edit Mode in PowerPoint which is correct but PPSX is also opening in Edit Mode in PowerPoint which is not correct
This issue only occurs if I open the document from the Doc ID link in SharePoint. If the documents are downloaded, it will not have this issue.
Questions
Can I set PPTX to open in Edit Mode and PPSX to open in Browser Mode?
Is this fixed as in if I change the registry setting it will affect both file types?
Is there other ways I can achieve opening PPTX in Edit and PPSX in Browser Mode?
[Environment]
My Client machine is running on I.E 9 and Office 2010.
Thank you.

Hi,
To make the PPTX file open in Edit mode and PPSX file open in Slide Show mode, I recommend to edit the registry key HKEY_CLASSES_ROOT\PowerPoint.Show.12 to 8.
I tested the scenario in my environment with changing the key value to 8, after that PPTX file opened in Edit mode and PPSX file opened in Slide Show mode.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to open sharepoint files in edit mode using associated link?

Hi All,
We are trying to use the URL links available through SSM to open documents we hold on SharePoint. These will be the action plans for the risks we are entering as KPIs. The aim is to established a one-to-one link between the risk KPI and the risk action plan as this is a fundamental reason behind using SSM for Risk.
However, when we enter the SharePoint URL into the SSM admin screen, clicking the link from SSM UI opens up the file as an internet explorer page which can not be edited and saved back to SharePoint. We did find a way to get through My Network Places to over write the file, but this only works if you have previously opened and edited and saved the file from SharePoint and requires lots of navigation by the user and is therefore not an appropriate solution.
Is there any way we this can be achieve? Appreciate your replies. Thanks in advance.
Regards,
David

Hi Bob,
Thanks for your reply. What I meant was when we put the UNC into SSM as a link in the URL box, SSM does not use the address it is given, instead it adds a http:// back in front and once again fails when opening the file in sharepoint.
For example:
SharePoint folder view used in test:
http://wccportal/resources/performance/risk/Risk%20Action%20Plans/Forms/AllItems.aspx?RootFolder=%2fresources%2fperformance%2frisk%2fRisk%20Action%20Plans%2fDOR&FolderCTID=&View=%7b84123F22%2d74F2%2d41B9%2d918C%2dFF23DAE35EB3%7d
Excel UNC link to folder
wccportal\resources\performance\risk\riskactionplans\DOR
SSM UNC Link - SSM changes the address to include http:// and also removes other \ breaks and adds in numbers and symbols.
Is there a way to stop SSM converting the local address back into a web address?
Thanks,
David

Open file in edit mode

I need to open a file in edit mode. In my web part on item click I need to do some action before hand (like create a folder and copy file, then open it in edit mode).
I came across the code segment below to set to a hyperlink's onClick() event
<a onfocus="OnLink(this)" href="/Shared Documents/myDoc.docx" onmousedown="return VerifyHref(this,event,'1','SharePoint.OpenDocuments','')" onclick="return DispEx(this,event,'TRUE','FALSE','FALSE', 'SharePoint.OpenDocuments.3','1', 'SharePoint.OpenDocuments', '','','','1','0','0','0x7fffffffffffffff')">Click</a>
But in my case, it would be nice if I can open in C# code behind, after the folder operations in my Visual web part.
SPfile's file.OpenBinary() give a byte[], but was unable to open file.
I am using a LinkButton for the user to click on. Any advise ?

Hi Ahamed,
I guess you need to undertake some action server side before you redirect the user. There are a number of different ways to do it ... maybe using a long running process with redirect at the end ... or some jQuery that calls a "handler" waits for a response
and then redirects the user.
For the code to duplicate or copy the file see here:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spfile.aspx
if the existing code you have to open the document in edit mode works you should be able to reuse it.
Thanks Chris

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

Try opening Disk Utility in your Applications-Utilities folder and repair permissions.

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

Which Operating system you are using?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

Cannot open the file due to an unknown error. (FRM0007)

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on some specific userID.
-It happens on tow computers
The following is log that may be helpful.
<busobj_2812_xxx>
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
It seems to be windows profile related issue could you please try to delete the user preferences under the registries for which you are getting the issue for the particular users.
Note: The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry.For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
1. Go to start programs->run->RegEdit.
2. Then go to HKEY_CURRENT_USER< Software< BusinessObjects<Suite 11.5<Business Objects.
3. Select the user preferences and delete the same.
Regards,
Sarbhjeet Kaur

Cannot open indd file in either CS5 or CS5.5

I downloaded CS5.5 on my laptop this afternoon. I then opened a CS5 file, worked on it, then saved. Now I cannot open the file in either CS5 or CS5.5. Is says InDEsign may not support the file format, the file is missing, or it is opened in anaother application. Does anyone know how I can open this file?

Just to be clear:
It won't open in either version. I created the file in CS5 (school computer lab), worked on it in CS5.5 (on my personal laptop connected through the server), then tried to open it on a school coputer using CS5. The file will not open.
Once you edit a CS5 file in CS5.5, it becomes a CS5.5 file and you will not be able to open it in CS5.
Make sure you are running the version you think you are, and don't double-click the file, but actually use File > Open from within InDesign CS5.5.

Cannot open pmd files in InDesign CS

I recently find I cannot open PM7 (pmd) files in InDesign CS. I used to be able to do this (they would open as Untitled), but now I just get an error message to the effect that InDesign cannot open this file, either because it does not support the file format, it is open in another application, or a plug-in for converting it is not installed. None of these things is true as far as I know. I can't place the pmd files into InDesign either, and I think I used to be able to do that too. I have tried repairing/reinstalling the Indesign program files but this makes no difference. Any suggestions would be welcome, otherwise I am going to have to use Pagemaker for new editions into the indefinite future!
Many thanks,
Tom Johnstone.

That's very generous of you to offer to convert the files, Peter, many thanks, but I have a whole lot I need to do and I wouldn't want you to have to devote hours to it! Somebody else in the office here might be able to help with the immediate problem. I still have Pagemaker and if really necessary I can output the files for my new edition from Pagemaker. However I have many years of publications stored as pmd and p65 files and I was hoping when they came up for revision or new editions to be able to convert them to InDesign. If this is not possible because of Windows upgrades it will be a real pain in the neck, to put it politely!
Tom.

Cannot open pdf files with Firefox's built-in pdf viewer

This just started (I think) with Firefox 37.01. This is on Win7-X64. I cannot open pdf files with the Firefox built-in pdf viewer. If I click on the file or try to open it from within Firefox, it brings up a "opening filename.pdf" message. If I select the "Open with" radio button as 'Firefox (default),' it just keeps looping on this process; it never opens. In Tools => Options => Applications, Portable Document Format (PDF) is indicated as 'Preview in Firefox.' I've never had any other PDF viewer installed on this computer. I've tried disabling all plug-ins and extensions, but it still doesn't work. I searched for solutions but haven't found any for this specific issue.
Thanks for the help.

Hello,
Have you tried, to start Firefox in safemode you can do so by following these steps
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Cannot open PDF files on internet with Acrobat 7.0

I use Acrobat 7.0 to make and read my PDF files. Also have reader 9.0 installed. Today internet explorer 9 stopped reading pdf files on the internet. Tried selecting both Acrobat 7.0 and Reader 9.0 but neither work. Only get the cannot open the file message. Tried three different sites to try different PDF files. Suggestions???

Only for reading files there are some other (newer but small) viewing tools. remember that.
Also I wouldn't use the in-browser function of any tool you use. It's not necessary.
The file will be also downloaded to your machine, there is no on the fly reading or anything else you expect.
so why will you waste screen size caused by the second menu bar.
Set your browser to open .pdf files outside, so you get more control where files are saved and you get a better screen size.
In my opinion in-browser-pdf is senseless, just a confusing gimmick.
Message was edited by: frameissuer

Acrobat cannot open the file attachment because your PDF file attachment settings do not allow......

I have an email with an attachment that requires a password the open. I can open the file but embedded in the attachment is another attachment. When I double click attachment I get the following error message. Acrobat cannot open the file attachment because your PDF file attachment settings do not allow this file type to be opened.

You would need to make a change to your registry; see http://www.adobe.com/devnet-docs/acrobatetk/tools/AppSec/attachments.html
Basically you would need to add the .pdf with the permission 2.
Let us know if you need help with that. Either way, make sure to create a System Restore Point before editing the registry.

错误"Cannot open the file due to an unknown error. (FRM0007)"

在XI3.0,当打开3层deski的时候，得到下面的错误
"Cannot open the file due to an unknown error. (FRM0007)"
-所有的deski文件都打不开
-用2层deski打开没有问题
-发生在某些特定的UserID上
-目前在两台终端机上发生
下面是进行拖拽部分的log文件，或许有帮助
<busobj_2812_xxx>
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015
Edited by: Emily Yang on Mar 20, 2009 2:08 AM

尝试一下如下操作：
1.在有问题的DeskI客户端打开注册表编辑器，开始菜单->运行->RegEdit
2.到HKEY_CURRENT_USER< Software< BusinessObjects<Suite 11.5<Business Objects下
3.选择user preferences并删除

Error"Cannot open the file due to an unknown error. (FRM0007)" in XI3.0

When open deski document in 3-tier mode, the following error is showed"
"Cannot open the file due to an unknown error. (FRM0007)"
-It happens for all deski documents
-It works ok when opening in 2-tier mode.
-It happens on two computers
-It happens on some specific userID,and only happens when two deski are opened, one is open by specific userA,the the other is opened by userB or both are opened by userA
it is、
　DeskI - opened by UserA
　DeskI - opened by UserA
or、
　DeskI - opened by UserA　
DeskI - opened by UserB
The following is log that may be helpful.
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::DoRealRefresh: 0.015
2009/03/02 01:33:38.468|==| |X|
2812|3592|}|||||||||||||||_BOGeneralDataManager::AutomaticRefresh: 0.015

Hi Emily,
Following solution might help you to resolve the issue.
1.You create your Deski report.
2.Save as the report (with or without 'Save for all users'- makes little difference at his stage).
3.Export the document to the repository.
4.Save as the report once again with the option 'Save for all users'(overwrite the copy that already exists on the local machine).
5.Log into Info view and delete the report.
6.Log back into Desktop Intelligence and try to open the report.
Regards,
Sarbhjeet Kaur

Cannot open source file

I just downloaded some new drum sounds on Logic Pro X that were offered upgrades and now I get an error message in my regular work that states,
"Cannot open source file" when I go to import an mp3 large file into any template or new project.
I've trashed preferences and have plenty of room to import the large files I usually work with.
Need guidance please.

Thanks Pancenter, that helped. I still hear a slight difference in the tone of voice speaking in a 48k session also.
Do you think this is the difference of being recorded at 44.1 mp3, then change to m4a and export the now 48k file into a 48k Logic session? I didn't see a way of changing Quicktime Player sample rate to 44.1, which is preferred in this instance. Future recordings I can set up at 48k but I have a bunch of files at 44.1 waiting for me that need a solution first.
Whew, and yes what a pain to do this when it worked fine before. (although for my work, I would prefer to edit as mp3 instead of turning into AIF then mp3 again- too much giggage wasted for this use)
Still open to other solutions without undoing the new sounds & such I just upgraded.

Cannot open VI file in edit mode.

Similar Messages

Maybe you are looking for