Cannot perform full backup and the the Reconnect screen occurs often

Lately I have been noticing the screen within the Lynk software asking me to either reconnect or reload. The device was connected and has not been removed in fact it is still on.
I try running a full backup using Lynk and it fails each time. When I run a settings back-up it works without a problem.

Likely, it is some third party application in the backup App Data which is causing the backup failure.
You can make separate backups of Settings, Media and App Data.
First, do a Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, try the App Data backup again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Unable to expand DG is Lync client - Cannot perform this action, and the cause is unknown.

    Hi,
    I have a user in our Hong Kong office that is unable to open a distribution group she has added to her Groups. She gets the error message "Cannot perform this action, and the cause is unknown. Contact your support team to investigate."
    I can add the group and expand it, so can some of her colleague, and some cannot. Her colleagues who can have the same client and global policy settings as she does. 
    I read in a similar thread that this could be resolved by confirming the server times on Lync, AD (domain controller checked and Exchange but they were all correct and in sync. 
    The global policy is set to 250 max contacts - but does a DL count as 1 contact, or does it count all the people within the DG? I am getting HK to confirm she does not have too many contacts but I dont think this is the issue. 
    Anyone else come across this issue?
    Phil

    You can run the command Test-CsGroupExpansion to test the ability of a user to employ group expansion.
    For the usage of the command, you can check
     http://technet.microsoft.com/en-us/library/gg399009.aspx
    Lisa Zheng
    TechNet Community Support

  • I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please

    I had photoshop installed fine.  We had to replace our hard drive, but had a full backup and everything else is working except for elements.  This is the message I get -Some of the application components are missing from the Application directory, Please reinstall the application.  I have reinstalled, but am getting the same message.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • HT1766 Now, I understand how the backup and restore the backup functions. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already the

    Now, I understand how the backup and restore the backup features function. However, if I don't want to transfer the music that I have on iTunes to my phone, how do I avoid it? How do I not transfer the music or take it out of my iPhone if it is already there? I really do not want any music on my iPhone because I have an iPod for that. Thanks. Hope someone can help.

    When you connect your phone and start iTunes on the left side you will see your phone listed under devices.Click on te icon next to it that looks like a battery. Click on the music button at the top and uncheck the sync music box.

  • HT1229 How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what.

    How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
    Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.

    The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
    You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
    Event Name will become  Folder Name.
    'Description Name' I guess is the Title you give the Photo
    Jpeg Number is the File Name assigned by your camera.
    So: File -> Export
    Set your Kind to Jpeg
    Select your preferred Quality
    Check the Boxes at 'Titles and Descriptions' and Location Information
    Under FIlename select 'Use Title'
    Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
    Regards
    TD

  • Macbook pro doing backup and close the lid does it stop the backup?

    Macbook pro doing backup and close the lid does it stop the backup?

    Yes it stops the backup and anything else that was running.
    Closing the MBP puts it to sleep.

  • Can I delete a later backup and keep the latest one as to not eat up all my space?

    Can I delete a later backup and keep the latest one as to not eat up all my space?

    Are you talking about Time Machine backups on a Time Capsule?
    It is fine to delete the backup as long as you are sure there is nothing you want.. and do a new clean backup. That will be the least possible space usage for a working backup.. Never delete files out of an existing backup.. it is very hard to manually delete files in the backup.
    We do not recommend it.

  • I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

    I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.

    downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.

  • Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

    Do I have the chance to get Photoshop for free if I'm a student? I mean the full version and not the trial.

    No. Just the student rate on a permanent or subscription license. Some places do include Photoshop and other products as part of the tuition, but it is a separate arrangement and most likely temporary.
    The Photography Plan is a fine deal at $10 a month. Creative Cloud Photography plan | Adobe Creative Cloud
    Otherwise there are free and paid lower cost Photoshop alternatives you can look into.

  • I shared a movie in iMovie and created a file with the movie but then now I cannot go back in and find the original version to make future edits. What am I missing here? how do i go back and edit the original?

    Hi! I need help! I created an imovie and then shared it and cannot go back in and edit the roigianl now. I am new to Imovie and am trying to figure this out quickly as i have to get this done by tonight. Thank you

    You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    If you want to go back to 3.6x, you will find it here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

  • How do I backup and restore the navigation toolbar?

    I want to backup my settings and restore them to a different computer. I can backup and restore my bookmarks but this does not seem to restore the navigation toolbar. Is there a way to backup and restore the navigation toolbar?

    See this article to backup and restore all your profile data: [[Backing up your information]].
    <BR><BR>To make it easier, there are several add-ons that sync your bookmarks, history, passwords etc between several computers. For example [https://addons.mozilla.org/en-US/firefox/addon/xmarks-sync/ Xmarks] and [https://support.mozilla.com/en-US/kb/How%20to%20synchronize%20your%20bookmarks%20and%20settings%20between%20computers Firefox Sync].

  • HT5313 I have been trying for weeks to download update 10.7.5 and cannot do so.  I do get a message at the end - "connection reset by peer".  Can anyone shed any light on why I cannot download this update and what the message may mean?  Thanks.

    I have been trying for weeks to download update 10.7.5 and cannot do so.  I do get a message at the end - "connection reset by peer".  Can anyone shed any light on why I cannot download this update and what the message may mean?  Thanks.

    Take a look at this discussion and the ones listed under "more like this" in the right column:
    https://discussions.apple.com/thread/4166820?start=0&tstart=0

  • HT4859 My phone some how deleted not all but most of my contacts and then backup to the iCloud can I go back to a previous backup and retrieve the contacts. If so how.

    My phone some how deleted not all but most of my contacts and then backup to the iCloud can I go back to a previous backup and retrieve the contacts. If so how.

    Hi Shero89,
    Thanks for the answer.  I am not new to IOS software but I don't really ever bother with it, have discovered how little I take advantage of the i-phones capability, in reality I still only really use it to phone, text, check emails, listen to music and look on internet.  I'm not keen on jailbreaking it as I don't trust it to work so normally just update and leave it at that.  Only reason I wanted to downgrade was because the update had stopped my bluetooth working but Kilted Tim solved that problem for me so am now not interested in downgrading software.  I quite liked the things that IOS 5.1 gave me but wasn't happy with fact that bluetooth stopped working in car as it caused me problems.  One day I might try and work out exactly what I-phones can do but on the basis that it's a phone all I really want it to do is phone, if that bit works I'm happy.

  • Time machine keeps performing full backup to my new time capsule

    After years of perfect time machine function to a local usb drive, I bought a time capsule and reconfigured time machine to backup there for my wife's macbook air and my macbook pro.
    The macbook air time machine is running perfectly. However after a week or so the time machine on my macbook pro has repeatedly performed a full backup and lost all the backup history. I clearly cannot keep on like this and find it very worrying that this piece of technology, even if it loses connection for some reason, is not robust enough to recover the incremental backup?
    Is this a weakness of time machine design? or is there something obvious I need to check?

    try if this user tip helps.

  • Insufficient disk space to perform full backup

    Hi to all
    i'm trying to backup my acs 5.2 "backup acs repository repository  application acs" but acs gives me a critical error.
    % Creating backup with timestamped filename: acs-121022-1431.tar.gpg
    % Error: Insufficient disk space to perform full backup.
    %        Try lowering the data window on ACSView Data retention under Data Management Configuration.
    % Application backup error
    how do i lower the data witdow in ACS view?
    thanks in adv
    Antero

    Hi
    the problem is solved now, i've openned a TAC and the cisco Guy told me how to solve it.
    in summary you need to have root access to ACS and then erase de acsview database and put a clean one.
    my acsview db has grown to 175GB., this was caused by  the misconfiguration of acsview database doesn't being backuped and the  purgin was, in this case, not being also done.
    so Brian if you hav e the same problem then you need to open a TAC case.
    Thanks
    Antero Vasconcelos

Maybe you are looking for

  • Sales order creatio in abap oo

    Hi experts, Pls send the source code for sales order creation in abap-oo, thanks Fazil

  • Oracle 9iAS v1.0.2.2.1 iSetup.exe file

    Hello! Could anyone arrange me a copy of a working iSetup.exe file for Oracle 9iAS v1.0.2.2.1, because the one that i downloaded does not work at all when i double click on it! I downloaded the iSetup.exe file that corrects the CD-ROM problem, but i

  • Other ways to start workflow java listener

    Hi all, Is there any other way to start workflow java listener apart from this procedure, type'n the following command : wfjvlsnr.bat "<user_name> <connect_string> Regards, P.Kalyan

  • A good book on Forms and Reports 6i.

    Dear all, to all guys from india.... i need a good book on forms and reports6i.... which covers all the aspects.... good for beginners and also for advanced developers....which has lot of examples....any third party books also... right now i have iva

  • Debit/credit amounts

    Hi, Iam trying to sum debit & credit amounts separately from bsak table. The following logic is not working. Can u tell me the problem... loop at t_bsak. if t_bsak-shkzg = 'S'.   l_debit = l_debit + t_bsak-wrbtr. endif. if t_bsak-shkzg = 'H'.   l_cre