Cannot print to Canon LBP 3360 since upgrading to Mavericks

I cannot print to my Canon LBP 3360 since upgrading to Mavericks. Would anyone know of a work around for this. Canon is not making any promises about upgrading the driver.

Canon Australia seems to have resolved this issue for all UFR II/UFRII LT printers . Ooof !
http://support-au.canon.com.au/contents/AU/EN/0100491502.html

Similar Messages

Cannot Access Disks on Time Capsule Since Upgrading to Mavericks

Hey folks...
So I've had this set up for several years, and it's worked out well. I have a time capsule with an external (self-powered) harddrive connected to it via USB. I usually access it via ethernet as the connection is more speedy than wifi, and my laptop generally remains stationary. For what it's worth, I'm using a Macbook Pro (mid-2010), with the original time capsule (500gb) as well as a connected Western Digital (1tb) external harddrive.
Since upgrading to Mavericks, however, I have not been able to consistently access the remote disks, either by wifi or ethernet connection. The time capsule shows up under my "shared" section of the finder window, but the drives (which are usually visible and accessible from within the time capsule) are not there. Strange enough, when I go into my Airport Utility for Time Capsule preferences, the disks are visible under the "disks" section.
The time capsules' firmware is up to date, as well as the laptop's. I have tried reseting the time capsule as well as my computer in addition to simply unplugging/plugging it back in. I was able to access the disks on a fluke once in the last few days, but after moving the computer away from it's standard spot, the disks are once again no longer accessible.
I had Server 2.0 but am unable to use it since upgrading the OS and haven't purchased Server 3.0. Any suggestions for solutions? Could residule configurations having to do with the Server functionality be affecting it? I'm guessing it is something to do with Mavericks. Thanks for any help or feedback.
Mitchel

I don't have a guaranteed solution to your problem, just some suggestions:
1) Try powering down the Time Capsule for at least 15 minutes, then plug it in again and see if it works better.
2) If you suspect that heat might be a problem, try raising the Time Capsule to give better air flow below it. I have mine on an inverted plastic-coated-wire basket of the type used to organize kitchen drawers.
3) If AirPort Utility can "see" the Time Capsule, you should be able to use the "archive" function (in the Disks panel, Disks tab) to write the disk's contents to a drive connected to the Time Capsule's USB port.
4) In the worst case, you should be able to access the files on the Time Capsule's disk by opening up the Time Capsule, removing the disk drive, mounting the drive in an external enclosure, and attaching the enclosure to your Mac.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

Hopefully this is what you are looking for:
Canon MP560 series:
Status: Idle
Print Server: Local
Driver Version: 10.84.2.0
Default: Yes
Shared: Yes
URI: usb://Canon/MP560%20series?serial=254057
PPD: Canon MP560 series
PPD File Version: 10.84.2.0
PostScript Version: (3010.000) 705
CUPS Version: 1.7.2 (cups-372.4)
Scanning support: Yes
Scanning app (bundleID path): -
Scanning app version: -
Scanner UUID: 00000000-0000-0000-0000-323534303537
Printer Commands: PrintSelfTestPage ReportLevels
CUPS filters:
Raster2CanonIJ:
Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Hope

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
I'm having this problem on both my iMac and my MacBook Pro.
I get errors like:
"unable to write pirnt data broken pipe"
"unable to send data to printer"
"printer not connected"
I've been reading responses to others with similiar issues and I've tried
deleting and re-adding my printer.
reseting my printing system
Installing Guenprint.
re-adding my pirnter with a generic PCL driver.
None seem to correct the problem.
This problem happens both when connected directoy with USB and when connected through the network.
I have no problem printing with my work (Wondows) laptop.
Any help would be appreciated.

Thanks, a brody.
Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
I thought the issue may have been resolved.
I was finally able to print my bank statement on both the iMac and MacBook.
Today, I'm back to the the same issues.
Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
In my mind, it's pointing more and more towards a hardware issue.

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos.

Since upgrading to Maverick my iPhoto does not consistently download my Nikon or my Canon camera photos. Occasionally it will recognize and download photos, most of the time though it hangs in "loading" mode with nothing downloaded. I've unplugged, replugged numerous times, tried a different USB port, tried the two cameras so it's not the camera or line that's the issue, turned the computer off, turned iphoto off, turned everything else off and stil nothing. I need my photos for my work and can't get to them, this seems to be an issue with Maverick AGAIN!!! Is there a fix? HELP! Thanks!

iPhoto Version 9.5.1
Thank you for your help Terence. I had 140 photos on my Nikon, none were viewable in iphoto, in Image Capture 5 were viewable, 135 weren't. I tried importing one to my desktop but it remained static and didn't move over. I just deleted all the photos on my camera, took a fresh photo and after waiting a good 4 minutes finally uploaded to both iphoto and Image Capture. As this took so long for one photo I'm wondering if the memory in my computer would impact the speed. I have 350GB used and 150GB left
By reformat the cards do you mean the flash card in the camera? I don't know how to do that, it's less that 6 months old.

Since upgrading to Maverick I cannot send/share photos through iPhoto. Dropbox says "not connected to server". All other online email activities work just fine.

Since upgrading to Maverick I cannot send photos while in iPhoto. Dropbox says I am not connected to server.
All other internet email activities work just fine.

And again why do you think Dropbox is involved in any way? There is no connection of any sort between iPhoto and Dropbox
THis sounds like you either need to (my personal suggestion) change your email client to Mail in the iPhoto preferenceemail if you want to use the iPhoto client under the accounts tab delete your account and re-enter it
Ln

Trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks

trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks, what do I need to do please ?

You're right. It wasn't QuickTime itself. I solved all the problems myself.
The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

Since upgrading to mavericks my applications crash when i try to use the print dialogue

since upgrading to mavericks my applications crash when i try to use the print dialogue

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Since upgrading to Maverick, I cannot back up my computer to WD My Passport Studio external hard drive. How do I do it?

Since upgrading to Maverick, I cannot back up my computer to WD My Passport Studio. How do I do it?

Have you checked with WD technical support?
Ciao.
This discussion may enlighten you:
http://https://discussions.apple.com/message/23943103#23943103#23943103
It appears it is a WD software issue.
Message was edited by: OGELTHORPE

Can't access Time Machine files since upgrading to Mavericks

I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found. I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade. The issue I'm having is that I can't access the backed-up files in any way.
When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc". It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning). If it wasn't writing to the disc, it would have showed me an error of some sort.
What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend. I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it. Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
My present Mac, a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
Message was edited by: briinoz

AFP won't connect since upgrading to Mavericks

Since upgrading to Mavericks I cannot connect to my QNAP TS-210 via AFP; this means my Time Machine can no longer find my backup disk and no longer works. Anyone else having similar issues?
I have tried the usual quick fixes:
Firmware is up to date
All OS updates installed
Server reset
DHCP renewed
DHCP switched to try manual setup
IP changed on server and Mac
It's odd as when connecting to server I can enter my login ID and it seems to be validating it ok but then doesnt connect to the server at all?
Any suggestions welcome!

Use a supported Time Machine configuration.
OS X Mountain Lion: Disks you can use with Time Machine
"Note: Some AFP disks from manufacturers other than Apple don’t support Time Machine. If your network uses an AFP disk, but the disk doesn’t appear in the list of devices available for Time Machine backups, contact the disk’s manufacturer."
Your complaint is very common with NAS devices. Some work and some don't. If they appear to work, they may fail upon attempting to restore from the backup, or they may fail every time Apple updates OS X. Given the goal of a backup strategy, using anything other than a supported TM configuration is not an option.

Problems downloading movies since upgrading to mavericks

Ever since upgrading to mavericks when it was first released, I have had nothing but problems downloading movies in iTunes. What normally would take no more than 30 minutes to download a movie and iTunes extras has now turned into waiting more than 3 hours with no less than 4 error messages saying iTunes cannot download the movie and I have to relaunch iTunes or reboot my entire system. It is getting quite annoying and I can't seem to find a solution.
Any help would be greatly appreciated.
Thank you in advance.

I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
This is not normal and needs to be fixed soon!

Since upgrading to Mavericks I have to force shut down to close frozen applications

Hi all,
Since upgrading to Mavericks I have experienced several times that sometimes when an application close a simple force quit is not enough. The application will disappear from my dock but remain on screen with the spinning ball, and any instances of the application I try to open will also freeze instantly. The only way to clear them is to do a force shut down via the power button on the back of my computer. I have experienced this with Mail, VLC and Finder so I do not think this an issue with a specific program. If anyone is having the same problem or has an idea of how to fix it, it would be much appreciated

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Cannot print to Canon LBP 3360 since upgrading to Mavericks

Similar Messages

Maybe you are looking for