Cannot run query described in introductory tutorial

Hi
I'm new to Berkeley DB XML, so thought I would follow the tutorial here:
http://www.oracle.com/technology/documentation/berkeley-db/xml/intro_xml/BerkeleyDBXML-Intro.pdf
I created my "phone" container with 2 records following the tutorial to the letter.
I've been able to run a getDocuments command and print the retrieved document, so I know the documents are in the database.
However, every attempt to run a query, as per the tutorial, meets with this error message:
query failed, Error: Cannot resolve container: Container not open and auto-open not enabled. Container may not exist.
I have run the command openContainer against the container, but that didn't help.
An introductory tutorial should be aboslutely watertight, I've only just started and I've had to stop. I've run into the same error on 2 computers both running MS WinXP. The db was installed using the installer.
Where am I going so wrong?

Jason,
I assume you are using 2.3.8. There is a bug in the dbxml shell that is accidentally setting the base URI when opening a container. If you add this line after opening or creating a container, you'll be fine:
dbxml> setBaseUri dbxml:/
That will reset the base URI to what it should be.
Regards,
George

Similar Messages

ORA-12856: cannot run parallel query on a loopback connection

Hi all,
i need some help , this error is has pop up in alert.log , i just don't know nothing about this loopback connection.
Can you please guive me some guidance so i can investigate the error (white papers, manuals etc)
My environment:
Oracle 11g running on windows 2003 server
Best Regards
Rui Madaleno

ORA-12856: cannot run parallel query on a loopback connection
Cause: A table or index in a parallel query is referenced via a loopback connection.
Action: Do not use loopback connection when running a query in parallel.
A loopback connection is a connection to the server itself,where you are currently logged on. Check your application(s) for such connections in combination with parallel queries. I never saw this error before,maybe you will need help from Oracle support.
Wernert
Werner

Urgent - Cannot run sub query from VB 6

Hello!
I'm having a problem with my Oracle OLE DB connection in windows using Visual Basic 6.0 SP3.
I can run normal queries just fine, but a correlated sub query like this:
select A.col_a, (select col_b from Tab_B where id = A.id) from Tab_A A
returns the following error:
"ORA-00907: missing right parenthesis"
But I'm able to run the query witout errors in Toad with the correct result!
So basically, I cannot run a (correlated?) sub query via OLE DB...
What am I doing wrong?? Is it a parameter that I need to set on the connection of command?
I'm not using stored procedures, only plain text SQL.
Very thankful for a quick answer, this is really urgent. If you have the possibility, please e-mail me at:
[email protected]
Thank you in advance.
Best regards,
Bnar Baban

Hi!
I'm running the latest version of Oracle OLE DB...when checking more in detail, it seems that the provider parses the code in a way, that makes the "(select" part of the sub statement be interpreted as a column name....when it does not find a right parenthesis, but a white space, it complains.
I switched to Microsoft MSDAORA provider, and now it works perfectly...
/Bnar

Cannot run workbook from desktop

Greetings All,
Discoverer version 10.1.2.0.2,
Disco Admin has created business areas and workbooks. Admin has also shared workbook with a user. When user tried to run workbook user is not prompted for parameters. WHen user refreshes worksheet still not prompted for paramater and user gets a blank worksheet. Basically, cannot run any shared workbook.(NOTE: do not even get msg that query returned no data).
When user tries to create a workbook by selecting items for a folder in business area, then again the same result - does not didplay any data (NOTE: do not even get msg that query returned no data).
User has select from all tables priv.
Any suggestion?
JP.

Hi,
Does the workbook bring back data for any other user?
Does this user have the Create/Edit query (Desktop/Plus privilege?)
Thanks.

Cannot run application HRSystem due to error deploying to DefaultServer.

I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help.
The plaform is linux. Thanks
DefaultServer startup time: 12661 ms.
DefaultServer started.
[Running application HRSystem on Server Instance DefaultServer...]
Uploading credentials.
---- Deployment started. ---- Jun 2, 2009 3:10:10 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-06-02 15:10:10.73: Writing WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:10.973: Wrote WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:57.397: Writing EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
2009-06-02 15:10:57.404: Wrote EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
Deploying Application...
<Jun 2, 2009 3:10:59 PM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HRSystem is not versioned.>
Jun 2, 2009 3:10:59 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
Jun 2, 2009 3:10:59 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
<Jun 2, 2009 3:11:22 PM CET> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
Jun 2, 2009 3:11:22 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Jun 2, 2009 3:11:22 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1243951858599' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HRSystem on DefaultServer.: Failed to load webapp: 'HRSystem-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
#### Deployment incomplete. #### Jun 2, 2009 3:11:22 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
     ... 12 more
#### Cannot run application HRSystem due to error deploying to DefaultServer.
[Application HRSystem stopped and undeployed from Server Instance DefaultServer]
Edited by: user1423903 on Jun 2, 2009 8:11 AM

Try removing this directory: /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/ and restarting JDeveloper.

Oracle TopLink 10g Introductory Tutorial: No Table Reference available

Hi,
I'm trying to work through the Oracle TopLink 10g Introductory Tutorial (http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_tutorial/index.htm).
At the point 'Map the Java Classes: Create One-to-One Mappings' (http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_tutorial/index.htm) I'm not able to select a table reference because there is no one available.
As result i get the following message after generating 'Mapping Status Report':
TopLink Map 'tut01Map' -> One of the packages is incomplete.
Package example.model -> One of the descriptors in this package is incomplete.
Descriptor Employee -> Some mappings are incomplete.
Mapping address -> No table reference is selected.
Mapping address -> Table reference is invalid because of the target table chosen.
Mapping version -> Mapping references write lock field stored in cache, but is not read-only.
Mapping phoneNumbers -> No table reference is selected.
Mapping phoneNumbers -> Table reference is invalid because of the target table chosen.
Descriptor PhoneNumber -> Some mappings are incomplete.
Descriptor PhoneNumber -> The following primary key fields are unmapped: EMP_ID
Descriptor PhoneNumber -> The following primary key fields have no writable mappings: EMP_ID
Mapping owner -> No table reference is selected.
Mapping owner -> Table reference is invalid because of the target table chosen.
End TopLink Map 'tut01Map'
Did I make a mistake or is there a wrong configuration? Please help.
I'm using:
JDeveloper 10.1.3.2.0
MySQL 5.0.33 with Connector/J 5.0.5
Windows XP
Thanks, TGau
Message was edited by:
TGau
Update

Yes I did. But my database storage engine is set to MyISAM which don't support foreign keys. So this 'error' results from database configuration (Info: InnoDB do support foreign keys).
I'm wondering why the queries didn't throw any errors. So the foreign key/reference part was just skipped.
Thank you very much, rsapir.
PS:
How can I configure configure 'application side' references/associations? It is described in the TopLink Developers Guide on site 34-10 ... but I have no Add/New Buttons?

"HP Solution Center cannot run because your device installation is not complete"

I cannot use HP Solution Center because I only get this message when I start it: "HP Solution Center cannot run because your device installation is not complete". I am running Windows XP with an HP PhotoSmart Premium. I can print just fine and the printer is recognized by the PC and the network. I get the same problem whether connected wirelessly or through USB. I have re-installed all software multiple times. Please advise on how to get Solution Center up and running.

I had to do a total uninstall and reinstall of the driver. However, as you will see from this and other Support Forum threads there seem to be multiple stumbling blocks to the uninstall/reinstall process. Seems very glitchy. After nearly two days of unsuccessful tries I finally got it done. I did find three different official HP scenarios for the process, including one automatically sent to my desktop by HP upon one of the earlier failures. That sequence did not work work for me, but it was close--I got a partial install. But on another HP help file titled "Product Software Installation stalls or stops in Windows 7 with a USB connected product HP..." I found a six step process (with details for each), and it worked for me on the second try. Here are the six steps, plus extra things I did or discovered that could have helped make it work. I did step 5b. first: downloading and saving the HP driver file on my computer before starting other steps, since I elected not be be on the internet as I did the installation. 1. Uninstall the HP printer software. See my note below about four ways HP lists do to this. I used two of them.2. Turn off the 'terminate and stay resident programs (has to do with system configuration). See HP details.3. Clear temporary files and folders through Windows accessories.4. Disable firewalls (see my note below about this)5a. Disconned the cable from BOTH the printer itself and from the computer, BUT TURN ON the printer.5b. Get the lastest version driver for you printer from the HP site and save it where you can find it. (I did this first, before other steps, so I could install off-line)5c. Install the driver software that you saved. (see my note below about an optional step that helped me with this, so the install will complete, and not hang up)6. Enable the start up software that was turned off with step 2. (See HP details) Notes: there are versions of HP instructions that skip steps 2 and 6 and or 3 and 4, but that would not work in my case. I describe the steps that finally worked in case they can help someone else--this has been so frustrating. This uninstall/install process seems to be very touchy and perhaps changes depending on your printer or other configuration of your computer: Note about step 1: I found an HP document that listed four ways to uninstall. On my final and successful attempt I actually used two of the techniques. First I used the HP uninstaller program from the start menu program list on my computer stored with other HP stuff there. When I rebooted it did not appear that any HP programs were removed, but who knows, perhaps this got rid of some hidden file somewhere that had been causing all of the problems. Then I used the regular uninstall process from the control panel, and that worked. All HP programs were gone upon reboot. Note about step 3: I counld not believe this would help, but did it, and again, who knows, perhaps this is critical. Note about step 4: I assumed that step two 'terminate and stay resident programs' turned off my McAfee firewall and antivirus, so I did not turn it off. And I elected to be off the internet during install because I am always fearful about turning off those programs. However, and this may be the source of problems for many people, the HP list was very specific to turn off the Windows 7 firewall. I checked it and it was running, even though I thought McAfee was in charge. So I did turn off the Windows 7 firewall. Subsequently I learned that many people who have upgraded from earlier Windows operating systems to Windows 7 have the Windows firewall operating along with their other firewall, without knowing it. Apparently this does not happen if you did a clean install of Windows 7 rather than an upgrade install. Note about step 5c: On many of my tries the installation program would not terminate or complete, and I would get a partial install that allow some functions of the printer to work, but not Solutions Center. The only way I found to prevent this was at the step near the end, where you hook up the printer, select the box that says it's okay to connect it later. The installer program dumps an icon on you desktop that allows you to connect the printer after the installation shows complete and terminates by itself. By clicking the icon and plugging the cable into computer and the powered-on-printer when directed, the device installs perfectly. That was the only way I could get a full install, or get the installation to terminate. During the two days of trying to make this work I also reinstalled the latest version of Flash player since I read that HP Solutions Center needs it to show screens on your computer about printer functions. Of course downloading Flash onto a 64-bit version of Windows 7 is a little tricky too, but not that difficult. I do not know whether that was important, but it is one more thing to try if you can't make your Solutions Center part of the printer program work. I learned way more about the unintall/install process than I ever wanted to know. Sorry to be so wordy, but after two days of frustrating work on this I thought I should share this, in case any of these ideas could help someone else who is hung up on this. Perhaps there is an easier fix somewhere. The six-step process was on an HP help site and was not even for my specific printer, but the similar list from my model did not work. Wish I knew what the secret to success might have been.

Cannot Run Photoshop CS5 on SSD

MAC PRO Spec:
MAC PRO 6 cores Intel Xeon "Westmere"
RAM=16GB by Kingston (apple certified RAM module = KTA-MP1333/4G)
HDD=Western Digital black label 1TB (original shipped by Apple)
SSD=Kingston Hyper X 240G
OS= MAC OS X Lion
Adobe product = CS5.5 design standard traditional chinese version
Problem description:
I've tried either Apple or Adobe tech support for resolving my problem. Unfortunately, I still cannot resolve my issues. Look for anyone could help me out to solve my problem. Currently,I am not able to start photoshop on my SSD drive while HDD is my secondary drive. Anyone know the issue and how to resolve the problem.
Let me describe how I set up my Mac Pro and how the problem happen.
While I got my Mac Pro (only have one HDD), I install my CS5.5 and run photoshop. Everything just works fine. While I got my SSD, I make the SSD becomes a boot drive on the Mac PRO (the HDD was set to become a data drive now. Everything installed in the HDD was still there, and I don't remove any of CS5.5 application which was installed earlier). Then I start to install CS5.5 on SSD. The first time is ok to run photoshop. After open and close photoshop a few times, I start to run photoshop again. Then the error message occurred and the photoshop cannot run at all. The error message said "The photoshop cannot start because cannot find the temporary stored files. "
Following is my testing and result
1. I've tried to let either SSD or HDD as a single drive to start photoshop....No problem.
2. HDD as a main drive and SSD as a data drive..... No problem to start photoshop from HDD
3. SSD as a main drive and HDD as a data drive..... Error mesage and photoshop cannot run

…or you could have illegal characters in the names of volumes or folders anywhere in the path to the files the application cannot find.
Stick to numbers, underscores and the characters of the English alphabet. No accented or special characters such as äöü ß áéíóú àèìòù ãõ, no apostrophes, asterisks, pound signs #, commas or slashes, etc.

Cannot load query "ZBM_M020_Q001" (data provider "DP_1": {2})

I'm getting this error message when I try to run any of my bookmarks in this new bi system
My url looks like:
http://<myserver>:<myport>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=REP_20090803204848&BOOKMARK=4EPI80Q37TF1VDU8EBTPT8RSY
I get this message: Cannot load query "ZBM_M020_Q001" (data provider "DP_1": )
When I click on "Information" I see the message: "Document class parameters are incomplete "
If I leave out the bookmark like:
http://<myserver>:<myport>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=REP_20090803204848
executes successfully.
If i create a new bookmark using this query and then execute it it executes fine.
This new BI Sys was created from Production, and somehow these bookmarks are not activated.
I looked in RSWR_DATA and I can see that all of them are type 'B', bookmarks.
Anyone know how this issue can be resolved so these bookmarks are usable?
Mike
Edited by: Michael Hill on Mar 30, 2010 5:41 PM

No it does not work. The bookmark is corrupted with DP_1.
I agree that the URL you have proposed should work without the query though. In fact you can put anything you want and it will work becuase the relevant information is stored in the bookmark, e.g the following works too!
?query=xyz&BOOKMARK=4EPI80Q37TF1VDU8EBTPT8RSY
I include the query in the url so I can remember what query the bookmark belongs to.
This pm we should have the fix transported to that system and I can adjust the bookmark.
Thanks for your reply!
Mike

Cannot run 'exec dbms_xdb.setlistenerlocalaccess(false)' in sqlplus for XE

Cannot run 'exec dbms_xdb.setlistenerlocalaccess(false)' from within sqlplus.
Apparently it does not exist, because when i do
sql> describe dbms_xdb
it shows sethttpport... but not the setlistenerlocalaccess.

Do you get any error messages?
It works correctly for me:
C:\WINDOWS\system32>sqlplus system/<pwd>@xe
SQL*Plus: Release 10.2.0.1.0 - Production on Sa Feb 25 20:47:16 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Verbunden mit:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> exec dbms_xdb.setListenerLocalAccess(true);
PL/SQL-Prozedur erfolgreich abgeschlossen.
SQL> exec dbms_xdb.setListenerLocalAccess(false);
PL/SQL-Prozedur erfolgreich abgeschlossen.###
1) As which user do you connect?
2) What version do you use (e.g. Windows Universal or Linux Western European)?
3) Please post your error sqlplus protocol
~Dietmar.

Unable to run query from BEx query designer

Hello,
I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
but query result isnt shown.
Internet Explorer cannot display the webpage.
What kind of setting do I need to change to get query working?
thanks

Hi Comandante,
If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX or RSRT transaction for now until the issue with the query designer is solved ..
Hope it helps!
Regards,
Pavan

How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

Hi mlheidt,
If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L

App cannot run on Windows Server 2012 R2

I have an application that runs well on Windows Server 2012. The application has two editions 32-bit and 64-bit, both are from the same code base.
However, on Windows Server 2102 R2, the x64 version of the application works, but the 32-bit version does not run. Invoking the 32-bit of the application generates the "This app cannot run on you PC" message.
I tried the compatibility troubleshooting, and it does not help.
Any suggestion on what could be the problem?
Thanks.
jwang

<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

After fresh installation on a new machine, my licensed copy of Adobe Encore CS6 "cannot run in non-royalty serialized mode."

"The application needs to be serialized with a royalty bearing serial number."
I have done everything recommended in all of the other threads relating to this issue -
Uninstalled the entire CS and used the Adobe cleaner tool - to no avail.
Uninstalled just Encore and re-installed, nothing.
And multiple combinations of the above mentioned.
Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.

I did not see this earlier. Forums are a bit odd today.
Do you have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
Unfortunately, the link that tells you how to fix this went missing in action some time ago.

REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.

Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi.

Cannot run query described in introductory tutorial

Similar Messages

Maybe you are looking for