Cannot send refund form

Cust support worse then comcast. I have been trying to reverse a charge on my credit card. Was finally directed to the refund form. Filled out the form - after signing in 3 times - submitted it, got an error message. Try later.
So the chat guy said, well try later with a different browser. IE or Chrome. Tried with IE, got a page in Japanese. Tried with chrome, got the right page but got the same error message.
Is there anybody in cust service at skype who can get anything done and if so how do you get hold of them?

Sorry to hear about the trouble requesting your refund. Can you share what exactly the error message stated? Maybe you even had the chance to take a screenshot and share that in your reply.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

Cannot send text

Cannot send text form my iphone 4S. . Even if I turn off imessage. I can receive messages. If I turn on I messsage the send and receive just shows my email if I press on it,it shows my email ticked and phone no in grey with no tick. It wont allow me to tick it. Can annyone help please

make an appointment to see a genius.

Cannot send back acrobat fill-in form from a yahoo e-mail account

I have recently used acrobat pro fill-in forms and acrobat.com to send to recipients. Some who have a yahoo e-mail account cannot return form to me because their computer says that there microsoft outlook isn't set up yet, but they do not use microsoft outlook, they use yahoo.com accounts. Why is this happening and what can they do to send the forms back to me? Anyone have any ideas?

Acrobat doesn't look for Outlook, I think, but for the Windows default email client. Millions of people don't set up this client, which is why I always advise that "submit by email" is no use except for testing and in certain corporate situations where the mail client is controlled.
This is why PDF forms, exactly like HTML forms, should always be submitted to a script on a web site (written by an experienced web programmer).

When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

When I try to fill out forms on line my I cannot send as it says my email isn't valid. I ve tried with my gmail and my work email and no luck. It will recognise my partners email with no problem. Please advise

Assuming that you can send email on the iPad, Maybe something is corrupt in Safari that is causing this. Try clearing Safari and see if the sites will accept your email address.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

TS2755 I cannot send text messages form my 4S iphone to other cell phones.

I cannot send text messages to other cell phones. Only iPhones accept the messages.

check to see if you have SMS turned on in the message settings.
IF that doesn't help contact your phone carrier as they handle messaging and see if they can help resolve the issue.

Cannot send email from icloud on web.

I use icloud in Safari to manage my email. Since yesterday each time I attempt to send an email, I receive the following:
"Cannot send message. This message cannot be sent at this time."
I am receiving emails, just cannot send.
I've tried both Safari and Firefox. I've tried restarting my computer.
I tried sending from both my @me and my @icloud addresses.
Lastly, I am able to send from my iphone 5. So this appears to be isolated to the web version of icloud.
Thank you!

I have been having the same problems for the last two days now. It won't let me send, but it will let me save it to my drafts folder. I even tried opening the e-mail form my iPhone 5 and it won't let me send it there either. The last two times i ended up copying the contents from my failed e-mail on my phone and pasting that into a new e-mail and that works. I normally use the icloud web app to reply to e-mails when i'm at work (using win 7) and it is very frustrating.

Still cannot send email from icloud .me address

hi. does anybody knows why i cannot send email from my ipad (ios 5.0.1) icloud me.com account? i can recieve but i cannot send. on my mac (lion) it works perfectly. the message i get is "the sender address .mac.com was rejected by the server". mac.com ?? but i use my me.com address. any ideas pls?
thank you

I have been having the same problems for the last two days now. It won't let me send, but it will let me save it to my drafts folder. I even tried opening the e-mail form my iPhone 5 and it won't let me send it there either. The last two times i ended up copying the contents from my failed e-mail on my phone and pasting that into a new e-mail and that works. I normally use the icloud web app to reply to e-mails when i'm at work (using win 7) and it is very frustrating.

"cannot send email message using the server icloud" on 10.6.8

I use mail from my desktop, not from iCloud on the Internet. I have a MacBook Pro with 10.6.8 Snow Leopard. My mail was working fine until yesterday.
It says "Cannot send message using the server iCloud. connections to the server smtp.me.com on the default ports timed out. Select a different outgoing mail server from the list below.
The list has:
ICloud offline
and Icloud
Neither of them work.
What has Apple changed regarding this in September?
(I know others have posted similar message, but they were on 10.7)

Same problem here.
Recently an @icloud.com version (alias) of my existing @me.com email address appeared on my account. I can still send messages form the OSX build in Mail client as long as I am using the @me.com version of my email, but I do get this message when I try to use the new @icloud.com account.
My account with iCloud states that both @me.com and @icloud.com versions of my email are active.
Would be nice to know if this is a temporary problem of if this is a permanent one.
The settings on the outgoing mail server are default as retrieved from apple when I configured the @me.com email for the first time. I went through the troubleshooting suggestions as provided on Apple website, double checking all the settings, no joy. At the very list I can still use the old @me.com alias with no problem (for now)
MacBook Pro / Mountain Lion 10.8.2

How do I fix Mail in Snow Leopard where I cannot send emails from my account to another account I've set up in Mail, but the reverse works fine?

I have a problem with Mail in Snow Leopard in that I cannot set up two email accounts for myself and my wife with the same ISP and have them operate properly. I've set up the accounts in strict accordance with my ISP's instructions for setting up email accounts on Mac Mail but I cannot send an email from my account to my wife's without a drop-down message appearing that Mail 'cannot send the email from this server. Please edit the server list'. No amount of tweaking appears to work. Applecare consultants have so far been unable to get it to work and a recent visit to the local Genius Bar in the Apple Store was fruitless also. My ISP's help line was unable to solve the problem even with a supervisor level consultant. The ISP concluded it was some kind of 'bug' in Mail.
I could send emails from my wife's account to mine, but not vice versa; I could send emails to other addresees without any problem and I can send emails from my account to my wife's using the ISP's webmail.
Does anyone please have a solution to my problem? At the moment we're operating one account (mine) on my Macbook and my wife's is set up on her iPad2. As we prefer to use the Macbook for storage and (using Time Machine) for back-up of our data, the two accounts on separate machines is a nuisance.
Another factor is that I prefer to control when I download emails and set my preferences accordingly. One of the so-called 'fixes' that were tried wound up downloading emails regardless of settings, even after removing my wife's account; the matter was remedied only after I had removed all accounts form Mail and started afresh from scratch.

You'll have to pardon my ignorance of some computer terminology; I'm a retired manager and not a computer technician, hence my muddling up of client and server terminology.
Re your comment about Port 339: I did qualify this with (?). As I wrote, it all happened at lightining speed and the guy at the Genius Bar didn't bother explaining what he was doing. Port designation contained 3s and 9s to the best of my recollection.
That said, you seem to be spot on re setting up a 'dummy' client in Mail. I set it up as you suggested and I can send to and receive from this client without a problem. You appear to have identified the solution, notwithstanding the claims of the ISP's 'experts'.
The next problem I have now is sorting out my wife's mailbox that is so troublesome whenever I set it up on Mail.
All the other set-up advice to date yielded a similar result; inability to send from my account to her inbox. Perhaps deleting her details from the account altogether and setting them up again from scratch may be the solution and I shall try that in due course. The impediment that I have with this at the moment is that my ISP admits that it has 'a technical problem with its email servers' and some of its related web pages that prevent my doing this myself. I will have to go through the telephone 'help' line and ask the technician to set it up at their end on my instructions. This has some disadvantages in that I have to divulge the password to the account to the operator rather than keeping it anonymous by doing it on-line. You may have solved the problem, but until I can successfully sort out a working mailbox for my wife i cannot definitively say so.
Many thanks for your perseverance. You've made more sense than anyone else so far and that deserves some points, surely?

Cannot send email in mail app. using POP account with Wi-Fi

I recently moved to an apartment that only has wireless internet access. Since moving I cannot send email using my POP account, although I can receive email. I was also not able to receive email using my .mac account, but I learned through this forum to change server port to 587 in .mac account and now I can send via .mac account in mail app. But I still cannot sent email with mail app. using my POP account. I changed no settings when I moved, and have never had this problem with cable. Any suggestions?

It all depends on the policy of whoever is the ISP at your new location and the method used by the outgoing (SMTP) server to determine whether you’re a legitimate user.
In an attempt to fight spam, many ISPs restrict the ability to send using an outgoing (SMTP) server not owned by them, usually by blocking port 25 for all traffic outside their own network, which means you cannot send with an SMTP server not owned by them if configured to use that port number. And it may happen the other way around as well, i.e. the outgoing server itself may look at the IP address you’re connecting from and refuse the connection if you’re outside its own network.
Something that often works is changing the outgoing server port to 587 (or whatever alternate port number the outgoing server listens to) instead of 25 and using some form of authentication in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings, but two conditions must be satisfied for this change to work: (1) the ISP must not block that port as well AND (2) the outgoing server in question must listen to that port and accept a form of authentication not based on the IP address you’re connecting from.
Independent mail service providers not tied to a particular ISP, such as .Mac and Gmail, do allow authenticated SMTP access on port 587, which is the reason changing the outgoing server port number solves the problem for them if the ISP doesn’t block that port as well.
The following article, for example, describes several ways to address this issue in the case of .Mac, but can be useful for other mail accounts as well (not just .Mac), and applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states):
.Mac: Server timeout alert message when sending email

Cannot send webmailwod from iCloud on laptop (Windows)ndows)

For 9 months I am using my laptop running on Windows (no mailprogram) for receiving and sending mails. All in a sudden message cannot send this mail at the moment. On my Iphone I still can send mails. I checked my browser (firefox), my virusscan AVAST, my main provider. Finally I changed my Apple/Iphone ID.
I still CANNOT send mails via iCloud.com as I used to do.
Who can help?

I have been having the same problems for the last two days now. It won't let me send, but it will let me save it to my drafts folder. I even tried opening the e-mail form my iPhone 5 and it won't let me send it there either. The last two times i ended up copying the contents from my failed e-mail on my phone and pasting that into a new e-mail and that works. I normally use the icloud web app to reply to e-mails when i'm at work (using win 7) and it is very frustrating.

DW CS5, Sending contact form results to email with page redirection using php script

I am currently building a site from scratch with Dreamweaver, with the intent of replacing my current website layout that was designed using Intuit's website builder. My dreamweaver site is not online, but i have setup a local test server on my computer, using XAMPP, and i have an apache server with a MySQL database and a mercury mailserver running. I mention that in case it makes a difference in your answers. If necessary, I can include those settings, but that may be asking too much.
I have an html contact form for users to schedule service appointments. I need the resulting actioned php file to do the following after submit is clicked: verify certain fields have been entered; prevent spammers or verify human visitors; send the form results to a (hidden from public view of any kind) email address; redirect user to a confirmation page, or an error page.
I found the following code but being less than a newbie im not sure what needs to be changed, or if its even the right script i should be using:
5 <?php
6 $email = $_POST['email'];
7 $mailto = '[email protected]';
8 $mailsubj = 'You Have a Service Request';
9 $url = '/MyLandingPage.html';
10 $req = '0';
11 $mailbody = "Results from form:\r\n";
12 $space = ' ';
13 $line = '
14 ';
15 foreach ($_POST as $key => $value)
16 {
17 if ($req == '1')
18 {
19 if ($value == '')
20 {echo "$key is empty";die;}
21 }
22 $j = strlen($key);
23 if ($j >= 20)
24 {echo "Name of form element $key cannot be longer than 20 characters";die;}
25 $j = 20 - $j;
26 for ($i = 1; $i <= $j; $i++)
27 {$space .= ' ';}
28 $value = str_replace('\r\n', "$line", $value);
29 $conc = "{$key}:$space{$value}$line";
30 $text .= $conc;
31 $space = ' ';
32 }
33 mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
34 echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
35 ?>
Can anyone please illuminate me on what I need?
Thank You in advance

Take a read here, this might enlighten you a little.
http://www.paulgdesigns.com/learncontactform.php
You are doing this with your local testing server, is it set up to email?
Gary

Error occured while sending a form in test in HCM Process & Forms

Hi
An error occured while testing my process in Design Time Tool. All the process, form, and workflow are consistent and activated, however when I send the form in test program available in Design Time Tool I get a Short Dump (as below) followed by the error "Workflow Item Not Found, Workflow Not Started."
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_UNKNOWN
ABAP Program           CL_POBJ_CASE==================CP
Application Component PA-AS
Date and Time          23.02.2012 09:38:34
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_POBJ_CASE==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"CL_POBJ_CASE==================CP" or "CL_POBJ_CASE==================CM00D"
"IF_POBJ_CASE~CREATE_CASE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Looking forward to your expert advice to resolve this error.
Best regards
Imran

This can be a few things....
1. Make sure you set up your number range for CASE Mgmt (t-code SCASE_NUMBERANGE)
2. if the POBJ_MODEL is missing in your CASE Mgmt environment
3. if the doc id for your object models (process, scenario, case) are somehow "out of whack" (not matching) between CASE mgmt, SCASE_CUSTOMIZING and SRMREGEDIT
4. authorization issues (which it more likely is)... I know it sounds weird, but even giving you SAP_ALL will not do it (even it is missing some of the auth objects). You have to be able to read/write to CASE Mgmt (so the related auth objects are needed....look for ones with S_SRM* or S_SCM*). Also, WF-BATCH user needs this auth as well!
This part can be a PAIN to get sorted out.

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. t worked, but only for those with PC. I could not get it to work with Apple Yosemite even with reader installed . is there a way i can make it work for apple /

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
Thanks

LiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well...

Saving and sending Adobe Form pdf from WebDynpro

Hi,
I'm developing an application which receives data from a RFC to a R/3. The datas are displayed on a pdf-Document in a Webdynpro. This works fine.
Now I want to send this form as attachment in an email. Do I have to save it first as pdf or can I send it directly?
On SapHelp I found a tutorial how to save a form as pdf:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/f1783fe3263042e10000000a114084/frameset.htm
I tried out the describtion but without success. I defined an action on the view where the form should be displayed and added the coding in the implementation of the event. In the form I added a button Submit to SAP from the Web Dynpro Library. When I press the button, nothing happens. Do I have to make any changes under Object->Field->Control Type?
Another question about the coding:
public void onActionsubmit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionsubmit(ServerEvent)
          IPrivateResultView.IContextElement contextElement =
               wdContext.currentContextElement();
          byte[] bytes = contextElement.getPdfSource();
          try {
               File file = new File("C:
temp
example.pdf");
               FileOutputStream os = new FileOutputStream(file);
               os.write(bytes);
               os.close();
          } catch (IOException e) {
                // do something
               e.printStackTrace();
          wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess(
               "You have pressed Submit!");
    //@@end
The path where the pdf shall be saved is "C:
temp
example.pdf", I expected something like "C:\temp\example.pdf" on a windows machine.
Where will the pdf be saved? On the machine i deployed the application (what about rights for saving) to or localy on the machine I start the app?
Does anyone knows how to send the pdf by email when saving the form or knows a helpful tutorial?
Many thanks for your help
Mathias Lange

Hi all,
doing Tutorial 31 from SDN (Interactive Forms using E-Mail) I have a problem with the entries for the smtp-host in the coding.
I always get the error message:
Sending failed; nested exception is: com.sap.engine.services.javamail.exception.JavaMailMessagingException: Cannot send message to host xxx:25 using the SMTP protocol.
//@@begin onActionSendForm(ServerEvent)
Properties props = new Properties();
String host = "xxx";
props.put("mail.smtp.host", host);
In host I entered the entrie for the smtp i use in Outlook, where it works fine. In the Tutorial i get the errormessage.
I have an smtp-server from our company with which it works too, but it is not the smtp used by Outlook.
And i can't use this smtp at my customers.
Could it be a problem with the used ports or a needed authentication? In the Tutorial is no coding for this.
Does anyone use a freemailer for this tutorial and have success with the smtp of this freemailer?
Kind Regards
Mathias
Message was edited by: Mathias Lange

Cannot send refund form

Similar Messages

Maybe you are looking for