Cannot start NodeManager Remotly (Via SSH Commands)

Hi all,
we are going to start the node manager of one of the cluster servers via SSH command.
But it is not starting. We can start it directly by log in to that server and run startNodemanager.sh script.
What is the issue?
Thanks,
Nir

Hi are you able to start Node manager using following WLST Command :
startNodeManager(verbos='true',NodeManagerHome='$WL_HOME/common/nodemanager',ListenPort='<PortNo>',ListenAddress='<HostName')
And also can check NodeManager Log files for errors .
Regards
Edited by: TheKop88 on Jun 5, 2013 6:13 PM

Similar Messages

Cannot start managed server via WLST - 'Overriding the ListenPort ...'

Hello everyone
I've created a development domain that has two machine, each of them has two weblogic server instances. On machine-2, I've started NodeManager already.
I started WLST tool, connect to AdminServer and invoke 'start' command to start managed server on machine-2:
start('MS-02','Server','t3://dvc.danang.vn:7003')
but I get fail message like that
wls:/dnict_domain/serverConfig> start('MS-02','Server','t3://dvc.danang.vn:7003')
Overriding the ListenPort or ListenAddress is not supported.
WLST will use the ListenPort and ListenAddress that are configured on the ServerMBean
Starting server MS-02 ....Permission denied (publickey,password).
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1280, in start
File "<iostream>", line 1744, in raiseWLSTException
WLSTException: Error occured while performing start : Error starting the server : Error occured while performing start : Server with name MS-02 failed to be started
Use dumpStack() to view the full stacktrace
wls:/dnict_domain/serverConfig> dumpStack()
This Exception occurred at Sun Oct 09 18:46:16 ICT 2011.
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be started
     at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
     at weblogic.management.scripting.LifeCycleHandler.startServer(LifeCycleHandler.java:501)
     at weblogic.management.scripting.WLScriptContext.start(WLScriptContext.java:477)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(Unknown Source)
     at org.python.core.PyMethod.__call__(Unknown Source)
     at org.python.core.PyObject.__call__(Unknown Source)
     at org.python.core.PyObject.invoke(Unknown Source)
     at org.python.pycode._pyx21.start$80(<iostream>:1270)
     at org.python.pycode._pyx21.call_function(<iostream>)
     at org.python.core.PyTableCode.call(Unknown Source)
     at org.python.core.PyTableCode.call(Unknown Source)
     at org.python.core.PyTableCode.call(Unknown Source)
     at org.python.core.PyFunction.__call__(Unknown Source)
     at org.python.pycode._pyx28.f$0(<console>:1)
     at org.python.pycode._pyx28.call_function(<console>)
     at org.python.core.PyTableCode.call(Unknown Source)
     at org.python.core.PyCode.call(Unknown Source)
     at org.python.core.Py.runCode(Unknown Source)
     at org.python.core.Py.exec(Unknown Source)
     at org.python.util.PythonInterpreter.exec(Unknown Source)
     at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
     at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
     at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
     at weblogic.management.scripting.WLST.main(WLST.java:180)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.WLST.main(WLST.java:29)
weblogic.management.scripting.ScriptException: Error occured while performing start : Server with name MS-02 failed to be startedI'm wondering about "Permission denied (publickey,password)" error. Can you show me how to fix this issue?
Any suggestion is appreciated
Regards
Cuong Pham

Try removing the 't3://dvc.danang.vn:7003' argument. If this information is configured in the managed server, its unnecessary.
Also, is the NodeManager registered with the AdminServer? You can use the command "nmEnroll([domainDir], [nmHome])" while connected to the AdminServer to if its not.

Can't send cntrl-alt-delete to start PC remotely via Mac

I am using Symantec PC Anywhere software and even when I try the Mac equivalent of cntl-alt-delete the PC I am trying to connect to doesn't recognize the command. (Once I am in, the connection works fine). Any suggestions? Is there a better program out there to connect to a PC remotely via Mac?

I am using Symantec PC Anywhere software
Are you running Windows on the Mac (via Boot Camp, or Parallels Desktop or VMware Fusion) or is pcAnywhere CrossPlatform Remote (or something similar) used under Mac OS X?
the Mac equivalent of cntl-alt-delete
Just guessing here (I do not know whether the command in question will work at all when used via said remote control program). Would it be correct to assume that you have noticed the difference between the delete keys on a PC and a Mac (the delete key on a Mac is the same as backspace on a PC). You may want to have a look at this article (and perhaps this one).
Is there a better program out there to connect to a PC remotely via Mac?
When working under Mac OS X, could something like this (or maybe one of the programs here) possibly be of interest?
Jan

How to enable fast user switching remotely via SSH?

There is a Mac which at the moment doesn't allow fast user switching. I have admin account on this Mac. Currently, another user is logged in, so I can access the Mac only via SSH. I don't want to destroy the session of that user otherwise the user can loose important data.
Can I enable fast user switching by accessing the Mac via SSH?

Try this:
defaults write /Library/Preferences/.GlobalPreferences MultipleSessionEnabled -bool YES

Certreq -submit run locally returns successful but run remote via invoke-command hangs

Good morning I have been struggling with a certificate request script.
The requesting server is in the dmz and I have a management server internally.
I successfully create the Inf file, as well as the req file then copy the req file to my internal management server. Once copied internal I attempt to run the following command from my laptop executing as my admin account
$Fqdn = "server.dmz.com"
$managementServer = "InternalServer"
$Path = "C$\Test\CertRequests"
Invoke-Command -ComputerName $Managementserver -ScriptBlock {param($CertificateAuthority,$FQDN,$Managementserver,$Path) certreq.exe -submit -attrib "CertificateTemplate:DVNOfflineComputer" -config "$CertificateAuthority" "\\$Managementserver\$Path\$FQDN.req" "\\$Managementserver\$Path\$FQDN.crt"} -ArgumentList $CertificateAuthority,$FQDN,$Managementserver,$Path
This exact command pasted into a powershell window locally on the management server returns the crt file.
Run via invoke-command just hangs forever. I even tried to the Silent=True in inf file as well as -q but neither worked.
Any help is greatly appreciated.

Hi Jason,
I reform the script as below, and add the "test-path" to check if the .req and .crt files exist, please also note you haven't assign value to the "$CertificateAuthority" variable:
$Fqdn = "server.dmz.com"
$managementServer = "InternalServer"
$Path = "C$\Test\CertRequests"
$CertificateAuthority = "something"
$script={
param($CertificateAuthority,$FQDN,$Managementserver,$Path)
test-path "\\$Managementserver\$Path\$FQDN.req"
test-path "\\$Managementserver\$Path\$FQDN.crt"
certreq.exe -submit -attrib "CertificateTemplate:DVNOfflineComputer" -config $CertificateAuthority "\\$Managementserver\$Path\$FQDN.req" "\\$Managementserver\$Path\$FQDN.crt"
Invoke-Command -ComputerName $Managementserver -ScriptBlock $script -ArgumentList $CertificateAuthority,$FQDN,$Managementserver,$Path
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot start Windows installer via Boot Camp

Hi!
Recently I cannot start my Vista, so I decided to delete the partition, create a new partition, and reinstall a Vista.
When I clicked Start Install Windows in Boot Camp, the MacBook Pro restarted and showed a black screen (it should display "Windows is loading files..."). I waited for 10 minutes or so, but nothing changed.
I tried an XP CD from my friend, and the same thing happened.
I don't think the DVD went wrong, because I used that DVD to install Vista on my MBP one week ago
Any suggestions? Thanks in advance!

If the screen goes black and nothing seems to be happening then it sounds like the install process isn't even starting, which seems rather strange. You might try asking for help in the Boot Camp forum in case someone there has had the same problem.
You said you had several Vista and XP installation discs. Are they copies or authentic? Also, keep in mind that you need an OEM disc to install Windows in Boot Camp, you won't be able to install it from an upgrade disc.

[Solved] Cannot start emacs through an ssh-forwarded x11 connection

Hi,
I recently installed Archlinux and am quite happy with it. Thanks to everyone who has apparently worked hard to make it so nice. There is one error that baffles me, however. I'm used to being able to start Emacs as 'root' through an ssh-forwarded x11 connection, but for some reason this doesn't work on Archlinux:
[simons@peti ~]$ ssh root@localhost
Last login: Sun Dec 14 17:50:28 2008 from localhost
[root@peti ~]# emacs
The program 'emacs' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAccess (attempt to access private resource denied)'.
(Details: serial 15 error_code 10 request_code 152 minor_code 4)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
Starting other applications this way does works -- it's only Emacs that aborts outright --, but I do get similar error messages, i.e. from qgit:
X Error: BadAccess (attempt to access private resource denied) 10
Extension: 152 (RANDR)
Minor opcode: 4 (RRSelectInput)
Resource id: 0x5c
X Error: BadAccess (attempt to access private resource denied) 10
Major opcode: 2 (X_ChangeWindowAttributes)
Resource id: 0x5c
I'm not exactly an X11 expert; I have no idea how to debug this error. The syslog doesn't say anything about an invalid resourcess access, neither does /var/log/Xorg.0.log. In ~/.xsession-errors I see the following error, but I don't know what it means:
gnc.bin-Message: main: binreloc relocation support was disabled at configure time.
Does anyone have an idea how to explain this phenomenon? Any suggestions would be appreciated.
Take care,
Peter
Last edited by peti (2008-12-14 20:01:27)

This is what I call an easy solution. Thanks for the tip, pointone. I wasn't aware of the difference between x11 forwarding and trusted x11 forwarding. My old installation didn't seem to make that distinction. Maybe that feature was added to SSH somewhat recently. Anyway, the point is that, now, Emacs starts up fine.
Thanks,
Peter

Cannot Start J2EE Server via the MMC

Hello. We have recently installed the netweaver platform and stumbled upon a problem. We are utilizing the MMC to start the J2EE server. I have searched extensivly through the threads and have completed all of the suggestions. Including memory adjustments and security settings. When I right click on the service and hit start it changes from grey to yellow but then to grey again. Do you know where there is a log that I can view to see the error?
Best Regards,
Pete

Hi Peter,
Right click on the same service that you are trying to start and select developer trace.
This should give you a view on what may be causing the problem.
Regards
Daniel

Remote command execution via ssh on ips sensor...

I am attempting to execute a command remotely via ssh so that I can collect the information on another host.
ex: ssh -t username@sensor show tech-support
Instead of the output I expect, I receive an error message: Error: Received invalid command line argument.
Is this type of remote command execution supported by the sensor?
Kevin Riggins

Not true, i already created scritp to automaticly backup the IPS

Remove a proxy setting via ssh or ARD?

Is it possible to delete a proxy config from the command line? I have looked at scutil, networksetup, ifconfig, ipconfig, systemsetup and scselet command, some of which will SHOW me a proxy config which is helpful, but I need to remove the proxy settings altogether.
Im going to be removing our proxy server this year (no more proxy), and will need to remove all proxy settings from all my Mac systems. Id like to script it somehow, or at least be able to do it remotely via ssh or ARD.

I dont think it works in Leopard. For example, when I type the related command:
"sudo networksetup -getwebproxy Ethernet"
I get the following answer:
Enabled: No
Server:
Port: 0
Authenticated Proxy Enabled: 0
(even though the proxy is configured and working and can be tested. Thus, networksetup doesnt have a clue about the proxy server configs in the Network system prefs pane.)
The "scutil --proxy" command does show me my current proxy configurations (similar to what the Network pres pane shows), but the command doesnt allow me to disable or delete them. Example:
<dictionary> {
ExceptionsList : <array> {
0 : *.local
1 : 169.254/16
ProxyAutoConfigURLString : http://wpad/proxy.pac
FTPPassive : 1
ProxyAutoConfigEnable : 1
HTTPEnable : 0
(I get the same response regardless if I type
"networksetup -setwebproxystate "Ethernet" off"
or
"networksetup -setwebproxystate "Ethernet" on"

Configure Screen Sharing via ssh

I have a couple of macs sitting at a remote location that currently has no people there. i need to get into the machines via VNC (have windows at my current location), to see something on the screen. unfortunately, last time i was in front of these machines, i turned on screen sharing, but did not enable the VNC password option. is there a way to configure that option remotely via ssh? I'd really hate to have to drive 2 hours to go hit a simple tick mark on a screen...

You can use the ARDAgent kickstart tool to set the password for VNC access. The command to do this is...
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -activate -configure -clientopts -setvnclegacy -vnclegacy yes -setvncpw -vncpw YOURPASSHERE -restart -agent

Changing password remotely via passwd

I need to change my password remotely via ssh on a machine running Leopard. I know one can do this via the passwd command, but it used to be the case that it wouldn't also change the Keychain password.
Do you know if passwd has ever been updated so that it also updates the Keychain password?

tgtrcg wrote:
We implemented a process in apex like described about 3 years ago. We didn't have any problems on ORACLE 11 R2 Standard Edition. When we use ORACLE 11gR2 Express Edition, we get exactly the same error ORA-04020 deadlock detected while trying to lock object 55.
Any ideas what went wrong ?
Thanks
SQL> select owner, object_name, object_type from all_objects where object_id = 55;
OWNER OBJECT_NAME
OBJECT_TYPE
SYS I_CDEF3
INDEX
SQL> select table_name from all_indexes where index_name = 'I_CDEF3';
TABLE_NAME
CDEF$

Changing VNC password via ssh

I am trying to change the built in VNC password remotely via ssh. Where is the VNC password stored? Can I remove the password line to reset it? Any other ideas on this issue. Yes, I did forget the it.

Found the answer here: http://www.macosxhints.com/article.php?story=20071103011608872

I can not start a remote server via Node Manager

There is a workaround to this problem. The issue seems to be
that when the node manager tries to start the managed server
it can not find java.exe in the system path. So please go to
Control Panel->System->...->Environment, and modify your PATH
system environment variable to include the java bin directory
in it.
Then try using the node manager again to start the managed
servers and you should have no problems.
We are aware of the issue and working on having a fix for it.
Savvas
"Rakesh Chauhan" <[email protected]> wrote:
>
Hey Guys!
I am using WLS6.1 on WIN2000 boxes. And I am getting the same error on
the Admin
console when I try to start any of the two
managed servers.
<Sep 25,2001 1:39:12 PM EDT> <Info> <[email protected]:7002><WindowsProcessControl:
online successfully invoked on server 'server90', pid: 0> The interesting thing is that when I start managed server of its own,
it is started
successfully and you can Stop the managed
server from the Admin Console.
Really frusted, I hope I have configured everything correctly. Can somebody
help
me out ?
Thanks Rakesh
"Martin Matthews" <[email protected]> wrote:
This message is simply a message from the Admin Server saying that it
has asked
NodeManager on the remote machine to start a certain server.
To see the logs for server startup then you can find these either on
the Admin
machine at WL_HOME/config/NodeManagerClientLogs/<ManagedServerName>/*.log
or on the remote machine at
WL_HOME/config/NodeManagerLogs/<ManagedServerName>/*.log
Cheers
Martin
"Paul Nixon" <[email protected]> wrote:
I also would like to know the answer to the question below from Vincent.
I am getting
this message in the Admin console from either of my two managed servers
whenever
the console has successfully contacted the Node Manager in managed
server
host.
The Node Manager logs themselves also report "online successful". What
doesn't
seem to happen is WebLogic startup and I haven't found any error log
that explains
why.
I have set the Remote Startup parameters correctly [I think] for both
managed
servers so cannot see what further is required.
Any input appreciated.
Paul.
"Vincent Ducret" <[email protected]> wrote:
Hi everybody,
When I try to start a remote WLS 6.1 server from my computer, I receive
the message
below in my WLS administration console. The Node manager is runningon
the remote
machine and correctly configured, I hope!
What does this message mean ???
Thanks for your help
Vincent
<21 aoÃ»t 01 10:19:17 CEST> <Info> <[email protected]:5555>
<WindowsProcessControl:
online successfully invoked on server 'testserver', pid: 0>

HANDSHAKE_FAILURE problem when starting managed server via NOdeManager

hi all, i am trying to start a managed server using nodeManager, but i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command start for
server managedServer via the Node Manager - reason: [CommandInvoker: Failed to
send command: 'online to server 'managedServer' to NodeManager at host: 'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable
to negotiate an acceptable set of security parameters.. Please ensure that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76) at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy -Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try to start
the managed server via adminserver console, i got the exception mentioned in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver, and
nodemanager is supposed to run at localhost:5555 (and indeed it does, because
ihave started it successfully).
thanx in advance and regards marco

Marco.
Sorry, this is not a solution to your problem but i am trying to solve the same
problem for a week now.
I have wl7.0 sp2, 1 admin server, 2 managed servers on the same box. I get the
same error. I know that the default certificate installed provides a hostname
verification of weblogic.com. I turned the hostname verification off, i put in
the Dweblogic.nodemanager.sslHostNameVerificationEnabled=false, i get the same
error when starting the managed server. I went ahead and created my own certificate
for machine called mallik, created my own passphrase, created a new keystore,
made the admin server view the keystore, used the same certificate for both the
admin server and the node manager. It still fails with the same error. I went
ahead and added the machine 'mallik' to nodeManager.hosts file. It fails. I am
totally confused now what needs to be done.
My nodeManger.hosts looks like this:
mallik 10.100.10.130
managedServer1 10.100.10.130
managedServer2 10.100.10.13
Below is the startNodeManager.cmd.
@echo off
@rem *************************************************************************
@rem This script can be used to start the WebLogic NodeManager
@rem
@rem This script sets the following variables before starting the NodeManager:
@rem
@rem WL_HOME - The root directory of your WebLogic installation.
@rem NODEMGR_HOME - The home directory for this NodeManager instance.
@rem JAVA_HOME - Location of the version of Java used to start WebLogic
@rem Server. This variable must point to the root directory of
@rem a JDK installation and will be set for you by the
@rem installer. See the WebLogic platform support page
@rem (http://e-docs.bea.com/wls/platforms/index.html) for an up-to-date
list of
@rem supported JVMs on Windows NT.
@rem PATH - Adds the JDK and WebLogic directories to the system path.
@rem CLASSPATH - Adds the JDK and WebLogic jars to the classpath.
@rem JAVA_OPTIONS - Java command-line options for running the server. (These
@rem will be tagged on to the end of the JAVA_VM and MEM_ARGS)
@rem JAVA_VM - The java arg specifying the VM to run. (i.e. -server,
@rem -client, etc.)
@rem MEM_ARGS - The variable to override the standard memory arguments
@rem passed to java
@rem
@rem *************************************************************************
SETLOCAL
set WL_HOME=C:\bea7.0\weblogic700
set NODEMGR_HOME=%WL_HOME%\common\nodemanager
set JAVA_HOME=C:\bea7.0\jdk131_06
Call %WL_HOME%\common\bin\commEnv.cmd
@rem If NODEMGR_HOME does not exist, create it
:checkNodeManagerHome
if exist %NODEMGR_HOME% goto checkJava
echo.
echo NODEMGR_HOME %NODEMGR_HOME% does not exist, creating it..
mkdir %NODEMGR_HOME%
@rem Check that java is where we expect it to be
:checkJava
if exist %JAVA_HOME%\bin\java.exe goto runNodeManager
echo The JDK wasn't found in directory %JAVA_HOME%.
echo Please edit this script so that the JAVA_HOME
echo variable points to the location of your JDK.
goto finish
:runNodeManager
if not "%JAVA_VM%" == "" goto noResetJavaVM
rem set JAVA_VM=-hotspot
set JAVA_VM=%COMM_VM%
:noResetJavaVM
if not "%MEM_ARGS%" == "" goto noResetMemArgs
set MEM_ARGS=-Xms32m -Xmx200m
:noResetMemArgs
@echo on
set CLASSPATH=.;%JAVA_HOME%\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%CLASSPATH%
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
cd %NODEMGR_HOME%
#"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.reverseDnsEnabled=true"
"-Dweblogic.nodemanager.javaHome=%JAVA_HOME%" weblogic.nodemanager.NodeManager
"%JAVA_HOME%\bin\java.exe" %JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath "%CLASSPATH%"
"-Dbea.home=C:\bea7.0" "-Dweblogic.security.SSL.trustedCAKeyStore=%WL_HOME%\server\lib\cacerts"
"-Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy" "-Dweblogic.nodemanager.certificateFile=C:\bea7.0\user_projects\myDomain\mallikcert.pem"
"-Dweblogic.nodemanager.sslHostNameVerificationEnabled=false" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.ListenAddress=mallik" "-Dweblogic.nodemanager.nativeVersionEnabled=true"
"-Dweblogic.nodemanager.reverseDnsEnabled=true" "-Dweblogic.nodemanager.javaHome=%JAVA_HOME%"
"-Dweblogic.nodemanager.trustedHosts=%WL_HOME%\common\nodemanager\config\nodemanager.hosts"
"-Dweblogic.management.pkpassword=weblogic" weblogic.nodemanager.NodeManager
goto finish
:finish
ENDLOCAL
I would appreciate if anybody can help me.
Mallik.
"Marco" <[email protected]> wrote:
>
hi all, i am trying to start a managed server using nodeManager, but
i keep on
getting following exception:
weblogic.nodemanager.NodeManagerException: [Could not execute command
start for
server managedServer via the Node Manager - reason: [CommandInvoker:
Failed to
send command: 'online to server 'managedServer' to NodeManager at host:
'localhost:5555'
with exception FATAL Alert:HANDSHAKE_FAILURE - The handshake handler
was unable
to negotiate an acceptable set of security parameters.. Please ensure
that the
NodeManager is active on the target machine].] at weblogic.nodemanager.NodeManagerRuntime.executeCommand(NodeManagerRuntime.java:472)
at weblogic.nodemanager.NodeManagerRuntime.start(NodeManagerRuntime.java:76)
at
java.lang.reflect.Method.invoke(Native Method) at
here is my script for starting nodemanager
set JAVA_HOME=c:\bea\jdk131
set WL_HOME=c:\bea\weblogic700
set PATH=%WL_HOME%\server\bin;%JAVA_HOME%\bin;%PATH%
set CLASSPATH=.;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar
java -hotspot -ms16m -mx16m -classpath %CLASSPATH% -Dbea.home=C:\bea\weblogic700
-Djava.security.policy=C:\bea\weblogic700\server\lib\weblogic.policy
-Dweblogic.nodemanager.weblogicHome=C:\bea\weblogic700
-Dweblogic.nodemanager.listenAddress=172.21.73.94 -Dweblogic.nodemanager.listenPort=5555
-Dweblogic.nodemanager.trustedHosts=C:\bea\weblogic700\common\nodemanager\config\nodemanager.hosts
-Dweblogic.nodemanager.certificateFile=C:\bea\weblogic700\common\nodemanager\config\demo.crt
weblogic.nodemanager.NodeManager
i have created an admin server, called adminserver
then i have created in the same domain a server called managedserver
both servers run on the same machine,at different port number.
i have created a machine, and associated managedserver to it.
in the machine/configuration/nodemanager i have set listenaddress localhost
and
listenport 5555.
my nodemanager starts automatically at htat port. however, when i try
to start
the managed server via adminserver console, i got the exception mentioned
in
the subject.
can anyone help?
regards
marco
can anyone point me to the right direction for solving this problem?
in the adminserver console i have defined a machine for teh managedserver,
and
nodemanager is supposed to run at localhost:5555 (and indeed it does,
because
ihave started it successfully).
thanx in advance and regards marco

Cannot start NodeManager Remotly (Via SSH Commands)

Similar Messages

Maybe you are looking for