Cannot test the Interface mapping for abapmapping

Dear all,
i am trying to go to the test tab in the interface mapping foe testing a abap mapping.
but it is giving me this error " unable to test . you cannot test the program in the test environment "
is this some authorisation issue

login to ABAP stack of XI and is the transaction SXI_MAPPING_TEST to test ABAP mapping

Similar Messages

  • I have imported a jpeg photo into iPhoto and cannot get the Places map to let me fix a position on the map. It remains disabled for my photo. Checking out the Help file has not given any solution.

    I have imported a jpeg photo into iPhoto  and cannot get the Places map tp show. I have tried the Help file and the information was not helpful. Can anyone give advice here?

    I am using iPhoto 9.1.1. When I select thephoto, then Places I get the window (Places to lookup disabled). When I hit theInfo button I get the size an JPEG notification, and  Faces and Key words. The “reverse” of thepicture shows a window with Rotate, Hide, Trash etc.
    When I select Places, get the Google worldmap, and this case a pin on Sydney Australia showing that eighteen photos arecorrectly placed. I am unable to make the connection to San Francisco wherethis particular photo was taken on a very modern camera.
    Regards,
    Theogt

  • Getting Java mapping errors when testing my Interface mapping

    Hi,
    I'm trying to test my interface mapping from IR, I keep getting these exceptions. All I'm doing in my interface mapping is I have two mapping programs a XSLT mapping with java helper functions with the XSL and a message mapping. In the test it pass thru the XSLT mapping but fails at Message mapping and throws the following exception. Any help on this is really appreciated.
    10:03:26 Start of test
    Call XSLT processor with stylsheet com/earthlink/xi/mapping/xmlc_to_crm_resp.xsl.
    START APPLICATION TRACE ***
    Response:
    0
    END APPLICATION TRACE ***
    Returned form XSLT processor.
    Call method execute of the application Java mapping com.sap.xi.tf._MM_XMLC_RESP_
    Error during appliction Java mapping com/sap/xi/tf/_MM_XMLC_RESP_
    java.lang.NullPointerException at com.sap.aii.mappingtool.tf3.AMappingProgram.exceptionCaught$(AMappingProgram.java:59) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException(Transformer.java:182) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:149) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrep.server.mapping.ibrun.RepJavaMapping.execute(RepJavaMapping.java:73) at com.sap.aii.ibrep.server.mapping.ibrun.RepSequenceMapping.execute(RepSequenceMapping.java:54) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    10:03:26 End of test

    Joe,
    most likely your XSLT is outputting a not well-formed XML message.
    Remove message mapping from the mapping list and execute it again, to check output.
    Also, for mapping debugging in java enhanced function inside XSLT mappings, use the following:
    1st, you need to pass the "inputparam" parameter from the XSLT runtime to the Java function (it needs to be one of the input parameters for the executed java function).
    In the Java code itself, implement the following code:
    AbstractTrace trace = (AbstractTrace) param.get(StreamTransformationConstants.MAPPING_TRACE);
    trace.addInfo("Log your message here!");
    where <i>param</i> is the input parameter refering to the <i>inputparam</i> from XSLT.
    The AbstractTrace and StreamTransformationConstants classes can be found in the aii_map_api.jar file (used in Java mappings).
    Regards,
    Henrique.

  • How to test the interfaces in XI ?

    Hi ,
    Our Xi system is being upgraded from 3.0 to 7.0. I was asked to test the interfaces once the upgradation is done. I am not sure how this testing is to be done and will there be aby test plan for this??
    Can some one help me on this ??
    Thanks in Advance,
    Hemanthika

    To test, you must have imported all your scenarios in to your new system.then couple of general tips,
    1.testing can be done only after understanding the scenario.
    For this, u refer to the integration scenario in ur design. so this shall give u an idea about all the systems involved in integration and how the data flowing is between them and what kind of systems they are?
    2. For testdata, you might need of business or functional team as you cannot have any info on the file formats etc(depending on different scenarios invloved like R3, SOAP Databse etc)
    these are only general tips. but u can refer to many of the trouble shooting guides already available blogs in sdn for any sought of inputs.But then, SDN is always there.
    you can test/monitor ur results in RWB->component monitoring
    also in sxmb_moni
    thanks
    kiran
    Edited by: kiran dasari on Mar 17, 2008 4:44 PM

  • I cannot choose the MX skin for the help

    Hi,
    I am in the process of testing RoboHelp8, and I am generating layers for some old projects.
    Everything is OK till now, however for some reason, I cannot choose the MX skin for my Flash layer.
    I used in the old projects the MX skin, however now when I try to select it, I press the OK button and nothing is happening.
    I can select however any other skin. Only the MX does not want to select.
    Did anybody met this issue till now?
    Thank you,
    Bogdan Marin

    iTunes Store: Invalid, inactive, or illegible codes

  • HT4759 i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

    i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8

    An update.
    From iCloud Control Panel 2.1.1 for Windows
    "iCloud Control Panel 2.1 and later includes support for Windows 8"
    but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later."

  • I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

    I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
    So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

    wjosten is spot on.  If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
    Ciao.

  • Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

    I get this message when I check the Device manager for my Ipod
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
    How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

    I reinstalled Itunes a couple of times.  I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems.  I have a yellow causion lite when I look at the USB-port with the phone connected.  All other devices work without a problem.

  • How do I turn off hierarchical keywording in LR 5?  The interface preference for auto complete is off and I still get California United State Country.  I just want Caliofrnia.

    How do I turn off hierarchical key wording in Lightroom?  The Interface Preference for Auto Complete is already turned off, but I still get California>United States>North America when all I need is California.

    You need to be signed in order to reply to posts.
    One reason why you may see the hierarchical type format for the keywords is that you have keyword 'California' duplicated in your keyword list.
    Lightroom will display them with "< Parent-keywords" appended to the end.
    ie California < State < Country  and California < United States
    If you re-keyword the photos so they only use one version and then delete the duplicate keyword from your keyword list then it will display just "California".
    Bruce

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • In Lion 10.7.x I cannot disable the Lock documents for 2 weeks in Time Machine! Thus it prevents to change anything else like the system preferences or other settings. How I can disable it?

    Hello, In Lion 10.7.x I cannot disable the Lock documents for 2 weeks in Time Machine! Thus it prevents to change anything else like the system preferences or other settings. All is locked. How I can disable it?

    Do you mean the check box isn't enabled?
    Or you remove the check but it doesn't "stick"?
    Or you remove the box but documents are stil getting locked?
    That setting doesn't apply to other things in System Preferences, just apps that support AutoSave and Versions.  If you're having a problem with System Prefs, please clarify exactly what.

  • I cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to th

    II cannot download the latest update for Adobe Muse CC. I have been directed  to this formum. I have an erro message "ERROR Adobe Muse CC has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. Trying to instantiate UID U4691 but lastAllocatedUID is only: 4491 OK"
    I am very frustrated because Muse crashes when cannot download updatres.
    I have been redirected to this forum from the 'Adobe Chat Team'
    I am trying to complete a project for a client, this is the second time I have asked for help. Can anyone please help me I
    I am using Windows 7. I am not sure if a response will come. I am new to forums. Do I wait or will someone contact me?
    Deb Kelleher
    [email protected]

    Hi Deb,
    Please accept my apologies for the inconvenience so far.
    I am not sure if you already tried this, but in case not, try to update Muse via Creative cloud directly.
    Start creative cloud application manager, if you dont have it, you can download it from here,
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    Login using your adobe id, once you are in, switch to Apps, and you should see the Update for Muse, click Update.
    Let me know if you get any error or warning.
    Thanks.

  • I cannot download the latest update for itunes because it say the file itunes.msi is missing

    I cannot download the latest update for itunes because it says that the file itunes.msi is missing

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

    I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

    If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
    Bob G

  • Cannot find the class file for com.sap.portal.services.api.connectorgateway

    Hi,
    I was trying the "How to BI JAVA SDK in a Portal iView and get the following error.
    The project was not built since its classpath is incomplete. Cannot find the class file for com.sap.portal.services.api.connectorgateway.IConnectorGatewayService. Fix the classpath and try rebuilding this project.
    I have the following in my portalapp.xml file
    <property name="SharingReference" value="com.sap.portal.ivs.connectorservice"/>
    and i have also added the jar file "com.sap.portal.ivs.connectorservice_api" in the set of lib's
    Has some faced a similar issue? or can someone suggest how I could possibly resolve this.
    Thanks,
    Smitha

    Hi Smitha:
       My webdynpro dc was build failed for "This compilation unit indirectly references the missing type com.sap.engine.services.webservices.espbase.client.dynamic.content.GenericObject (typically some required class file is referencing a type outside the classpath)".
    How should i do?  Thank you!

Maybe you are looking for