Cannot view webpages from internet using windows server 2012.

I can ping public websites, such as google.com etc
Dns resolves name resolution correctly, returning correct ip address.
My issue is that no webdata(html) is returned when requesting a webpage from a public website
I have reduced my internet explorer security settings to the lowest possible just for testing.
I can view local websites on my server correctly.
I am also currently trying activate my windows server 2012 and cannot do this as a result of this issue.
No windows update are taking place either.
I am using a d-link adsl router(DSL-2750U) via the lan to access the internet.
My server is a Dell PowerEdge T20
My laptop can connect to the internet and has no issues using the same network.
I have tried using fixed and dynamic IPs
I am trying to connect to the internet for the 1st time from the server.

Hi,
Or please disable all your firewall and AV soft, as far as in know, some AV soft can block some “unsafe” website URL, or disable the IE ESC.
The related article:
How To Turn Off Internet Explorer Enhanced Security Configuration
http://blogs.technet.com/b/chenley/archive/2011/03/10/how-to-turn-off-ie-esc.aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Single server solution for RDS / TS / RDP using Windows Server 2012 R2

Planning on setting up a small single server and need this functionality:
* 3 local users runnnig Windows 7 Home Premium needs to access files on the server
* The same 3 users should also be able to connect from home (PC, Mac, iPhone) and run an application on the server. (Session-Based Remote Desktop).
We want to use Windows Server 2012, and found out that Essentials does not support RDP, so that leaves Foundation and Standard versions.
However, I also found out that in WS 2012 the RDP can not be on the same server as the Domain Controller, and we therefor needs to run 2 server instances on our hardware. I think this starts to look way to complicated for what we want to do, but found out
that WS 2012 R2 allows a single server to run RDP (See TechNet article 2833839).
So we will go for Windows Server 2012 R2, either Foundation or Standard to set up our RDP.
So now the question: Will that solution work with our local machines running Windows 7 Home Premium, as they cannot connect to a domain? Can we set up some kind of simple file share or Workgroup to acces files locally while still keeping the RDP
functionality on the server?
And, will WS 2012 Foundation R2 do this as well as WS 2012 Standard R2?
(I have been asking several locat MS representatives to find a solution to our needs, but no one seems to know how this works....of cause we could just get 2 WS 2012 Standard server instances, run one as DC and on as RDCB and upgrade all our clients to Win
7 Pro, but we would like a solution with minimal investment in time and money)
Rgds
Petter

Hi Ryan,
and thanks for the answer! I do not know how to do "multiple quote" in this forum so I do it this way:
"have you considered virtualisation, as you can run multiple virtual machines under one licence. I think this would be the cheapest and most efficient use of your money. Upgrading your clients to Windows 7 pro would allow you to have domain control
Single Sign On SSO. "
This is the "official" solution I think: Upgrade all clients to Win 7 Pro and run two instances of Win Server 2012 Standard on the server.
However, I was hoping to get away with something a bit more Quick & Dirty.....;-) We do not have big security issues and will have a good backup system, and I think for 3 users only, it will be more work trying to centralise administration like updating,
backups etc, than to just go to each machine and do what is needed.
We are good with computers/Windows but have no Server experience. A server guy will help us get started, but I dont want him around after that, so it must be a very simple solution.
Also, installing 2 instances of WS 2012 and upgrading all 3 clients to Win Pro, and then installing all software and settings on the clients into the new domain user accounts on these clients is quite a lot of work. So I was hoping to keep only existing local
users on the client machines and only have some kind of file share thing going on with the server disks that we need to access. So perhaps use a Workgroup instead of a domain, if that works with the RDS setup?
"Option 1
2 virtual machines 1x DC and 1x RDS server."
So, if we set up RDS this way (so we can log in remote and run our application session-based on the server), can we keep the local clients running Windows Home Premium using our current local user logins (ie no domain user accounts created on the client machines,
as this is impossible in Home versions) and still access the server disks somehow, or is it impossible?
Another question is if it is stupid/a really bad solution...but I still want to know if it is possible....;-)
"Option 2
2 virtual machines 1x DC and 1x RDS server.
You can configure your RDS solution as a domain joined platform and will still be able to access resources from the local device as you can map local drives to the session host. http://www.serverintellect.com/support/techfaq/drive-rdp/
Your users would have two sets of credentials, one for the local client and one for the domain."
I do not want to access files over VPN or RDP, we only want to run an application on the server from remote (Session-Based Remote Desktop). However when we use the local clients we want to access files on the server, and then we access huge image and film files
on fast RAID drives, so local network speed must be top speed. Also if possible we would like to not upgrade to Win Pro, and then joining a domain is not possible.
"Option 3
1x Server
The second option would be to manually deploy the session host role and licencing role to a work group server. This would limit access to RDP only and you would loose web access functionality."
I think this is what I was hoping for. It seems that the new R2 release of WS 2012 allows you to rund RDP and Domain Controller roles on the SAME instance of the server. That sounds nice, it limits what we need to keep track on and minimises the load on the
server that needs to act as a very fast file server locally.
However, can we do this and still keep file acces with only Windows Home (no domain) in the local clients (same question as above under "Option 1")?
Rgds
Petter

Using Windows Server 2012 per-User RDS CAL on Server 2008 R2 Session Host

I have a Remote Desktop Licensing Server setup on my domain controller running Windows Server 2012 R2. I have installed a
’Windows Server 2012 Remote Desktop Services per-User CAL’ there and activated the licensing server already.
Currently I use ONLY Windows Server 2008 R2 machines as RDS Session Hosts (in the future I plan to transition them to 2012 R2, hence the CAL I bought is
already in the newest version).
I have already configured my WS 2008 RDS Session Hosts: set
Per-User licensing mode and specified license server address. The connectivity between my Session Host(s) and my License Server seems to be ok as the
Remote Desktop Session Host Configuration window on the Session Host correctly lists the 2012 per-user
license (CAL installed on server) from the license server.
On the License Server I can also see event logs entries (in
Microsoft-Windows-TerminalServices-Licensing/Admin), indicating that the user has been issued a license.
The issue I am having is that the license being issued is
2008 Per User CAL license (Build-in OverUsed - temporary) and not the 2012 Per User CAL license which is the only license installed on the server. According to the RDS CAL interoperability matrix at
social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx, I was expecting the 2012 license to be backward-compatible with 2008 client (and that
in the absence of legacy licenses, the (only) 2012 license would be used for all clients connecting to the licensing server)
Before I bought my license, I found this document:
download.microsoft.com/download/3/D/4/3D42BDC2-6725-4B29-B75A-A5B04179958B/WindowsServerRDS_VLBrief.pdf
which says that - "newer version RDS CALs can be used with an older version of the server software" (In section FAQ, Q4), which means to me that
the 2012 license would work as-is for the 2008 Server and gives me flexibility when upgrading to the new server version.
How can I make this CAL work in my environment?
Note:
I have already explicitly disabled
Prevent license upgrade Group Policy setting which I assumed would fix the issue but nothing has changed.
Then I have enabled License server security group Group Polity setting
and added computers from my domain to RDS Endpoint Servers AD group. I have also created new AD group called
Terminal Server Computers and added the computer accounts there, but it changes
nothing. Reference - technet.microsoft.com/en-us/library/ee791761.aspx , technet.microsoft.com/en-us/library/cc725704.aspx and blogs.msdn.com/b/rds/archive/2009/09/17/control-the-issuance-of-rds-cals.aspx.
I found one potential ‘workaround’ which involved manually downgrading my CAL license by calling
Microsoft Clearinghouse. I am very reluctant do to so because, as I upgrade parts of my infrastructure to Server 2012, I’d need to then ask Microsoft to manually upgrade a part of my license back as well.
Am I missing something? What should I do to get my 2012 CAL to be issued to 2008 R2 server

Hi, I have tried several other possibilities.
I change expire date for my temporary assigned license (2008 CAL overused). It can be done, by changing Active Directory user properties – msTSExpireDate. When I restart my Session Host server and logged again, my license was renewed
for next 60 days (event ID - 4145).
I also delete information about license for this user (clear msTSExpireDate and msTSLicenseVersion). And the license was successfully removed from License Manager. After another SH restart it gets the same – 2008 overused – license
(event ID 4143 - license server has successfully issued …)
I now, that changing info in AD attributes is a little trick, and this is not a real value - only a reference, but it was useful to delete or change expiration date of license. But it didn’t change type of license as I expected.
Reference -
http://discussions.citrix.com/topic/243320-windows-2008-licensing-questions/
To TP:
I have found your post with information:
If you have a Server 2012 RD Licensing server you may install your 2012 RDS CALs on it (no downgrade necessary) and then set your Server 2008 R2 RDSH to
use the 2012 RDL server. The 2012 RD Licensing server will automatically issue the CALs as 2008. -
https://social.technet.microsoft.com/Forums/windowsserver/en-US/6046ded1-96bf-4d79-89ce-38aac2a6694e/can-we-use-windows-server-2012-rds-cal-license-in-rds-2008-r2-server?forum=winserverTS
And it showing my situation in brief. I also found
similar problems, but the solutions don’t meet my expectations.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dcfb1966-89a8-4b5d-bf5a-ff03ac0b7a66/rds-cal-licenses-not-recognized?forum=winserverTS
– “sudden all of the CALS were available”
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f1228599-8452-4a3e-a263-061de14bfcfe/server-2012-rds-builtin-overused-cals-issue?forum=winserverTS
– “this should go away after a while”
Is there a way to determine this time you mentioned before? Or should I just wait patiently…

Domain computers can't runt RD Web applications when connected from outside company – Windows server 2012 R2

Hi Everyone,
I have a question related to RDweb service.
I have successfully installed RD web role on windows server 2012 R2.
All went ok. I also installed a valid third party certificate.
I can connect from outside to the server and run applications using any devices: Ipad’s, mobiles and laptops.
The problem is that: Any Computer/Laptop that is joined on the domain can connect to RDWEB from outside the company BUT CAN'T RUN ANY APPLICATIONS. The RD session is taking long time it failes.
Note that from inside the network is working.
What it can be?
Thank you in advance,
Criss

Hi,
The internet connection from where I’m doing the tests is quite good. I think the error with the latency is not relevant because probably the computerRD gateway it doesn’t allow it and that way it fails with this error. For a computer that never been joined
on the domain is working perfect no delay at all..
We are using RD Gateway … installed everything on the same machine Windows server 2012 R2.
When I click RemoteApp I see the remote the prompt of RD gateway, I click ok, then nothing happened for 2-3 min. after this time it brings the error with the delay.. OR “couldn’t connect on the remote computer because an error occurred on the remote
computer that you want to connect to.”
Again, the connection is failing ONLY when we try to connect from outside the company and it happened ONLY with the Computers that are joined on the Domain.
EX: An user (with Office Laptop - joined on domain) can connect to RD Gateway and lunch the RemoteApp’s from inside LAN but when is leaving Home can’t run the Remote App;s. In the meantime he can connect and run RemoteApp’s with his private computer.
What it can be different between the Office and his home private computer?
For Outside users we’ve have open only port 443 on firewall. Why need to open UPD 3391?
I’ve notice that if I take a laptop that is working and join it on the domain it will have the same issue. If will dis-join it will still have the same issue after all.
Thank You

Windows 8.1 Pro cannot log into RemoteApp running on Windows Server 2012 R2

I have setup a vm running Windows Server 2012 R2 Standard and have enabled multiple RemoteApps. Everything is setup correctly and I can use RD Web Access to access the portal and connect to the remoteapps from any computer except my own. I am
running Windows 8.1 Pro and when I log into the RD Web Access portal, click on one of the apps, it looks like it's loading the session, but gets stuck on Preparing Windows. Everything else up to that point looks like it loads correctly, (i.e. -
Applying Group Policy Settings, applying desktop, etc...). When I log into my Windows 7 dev machine, I can access and run everything just fine. So there must be something between the Windows 8 and 2012 that isn't working quite right.
I have tried logging into the portal as myself and test users...same result.
any ideas?
Jon Wooten

i think there is something in your GPOs or collection settings causing an issue
this happens with any remote app, built-in stuff like notepad or just third party apps?
try not doing any kind of printer/device redirection from that host
you can also do winlogon logging to get a better idea of what's going on during the logon operation
you can also use the verbose logon messages GPO to get detailed login status info
if all else fails I think you need to isolate it by creating a test collection and test user with the bare minimum options

Hyper-V 2012 High Availability using Windows Server 2012 File Server Storage

Hi Guys,
Need your expertise regarding hyper-v high availability. We setup 2 hyper-v 2012 host in our infra for our domain consolidation project. Unfortunately, we don't have hardware storage that is said to be a requirement that we can use to create a failover cluster
for hyper-v host to implement HA. Here's the setup:
Host1
HP Proliant L380 G7
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Host2
Dell PowerEdge 2950
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Storage
Dell PowerEdge 6800
Windows Server 2012 Std
File and Storage Services installed
I'm able to configure the new feature about Shared Nothing Live Migration - i'm able to move VM's back and fort between my hosts without storage. But this is planned and proactive approach. My concern is to have my hyper-v host to become highly available in
the event of system failure. If my host1 dies, the VMs should go/move to host2 and vice versa. In setting this up, i believe i need to enable the failover clustering between my hyper-v hosts which i already did but upon validation, it says "No disks
were found on which to perform cluster validation tests." Is it possible to cluster it using just a regular windows file server? I've read about SMB 3.0 and i've configured it as well i'm able to save VMs on my file server, but i don't think that my hyper-v
hosts are already highly available.
Any feedback and suggestions or recommendation is highly appreciated. Thanks in advance!

Hi Guys,
Need your expertise regarding hyper-v high availability. We setup 2 hyper-v 2012 host in our infra for our domain consolidation project. Unfortunately, we don't have hardware storage that is said to be a requirement that we can use to create a failover cluster
for hyper-v host to implement HA. Here's the setup:
Host1
HP Proliant L380 G7
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Host2
Dell PowerEdge 2950
Windows Server 2012 Std
Hyper-V role, Failover Cluster Manager and File and Storage Services installed
Storage
Dell PowerEdge 6800
Windows Server 2012 Std
File and Storage Services installed
I'm able to configure the new feature about Shared Nothing Live Migration - i'm able to move VM's back and fort between my hosts without storage. But this is planned and proactive approach. My concern is to have my hyper-v host to become highly available in
the event of system failure. If my host1 dies, the VMs should go/move to host2 and vice versa. In setting this up, i believe i need to enable the failover clustering between my hyper-v hosts which i already did but upon validation, it says "No disks were
found on which to perform cluster validation tests." Is it possible to cluster it using just a regular windows file server? I've read about SMB 3.0 and i've configured it as well i'm able to save VMs on my file server, but i don't think that my hyper-v hosts
are already highly available.
Any feedback and suggestions or recommendation is highly appreciated. Thanks in advance!
Your shared storage is a single point of failure with this scenario so I would not consider the whole setup as a production configuration... Also setup is both slow (all I/O is travelling down the wire to storage server, running VMs from DAS is ages faster)
and expensive (third server + extra Windows license). I would think twice about what you do and either deploy a built-in VM replication technologies (Hyper-V Replica) and apps built-in clustering features that does not require shared storage (SQL Server and
Database Mirroring for example, BTW what workload do you run?) or use some third-party software creating fault tolerant shared storage from DAS or investing into physical shared storage hardware (HA one of course).
Hi VR38DETT,
Thanks for responding. The hosts will cater a domain controller (on each host), Web filtering software (Websense), Anti-Virus (McAfee ePO), WSUS and an Auditserver as of the moment. Is the Hyper-V Replica somewhat give "high availability" to VMs or Hyper-V
hosts? Also, is the cluster required in order to implement it? Haven't tried that but worth a try.

1. Will CAL Licenses works if i use Windows Server 2012? 2. What GB of RAM can be used with Windows Server 2008 Standard Edition?

I have been using Windows Server 2008 Standard Edition for my business purpose and there are at-least 30 Users who logged in into the server Via Remotely from different location. I want to upgrade my server with latest one with some extra cores and RAM for
better and smooth operations for all users. So, i have a doubt whether my CAL Licenses will works with Windows Server 2012 or i need to purchase the new one for the same?
Moreover, if i don't upgrade my Windows to any 2012 edition and stay on 2008 Standard Edition how much maximum RAM can be installed at a time? is there any limitations? if Yes, please let me know how do i upgrade my Windows 2008 Standard Edition to any other
business edition to avoid such limitations of RAM?
Waiting for your favorable and quick response.

Hi again,
th eupgrade optiuon from Standard 2008 to Enterprise 2008 was only available for customers with open value contract with activ esoftware assurance then they can purchase the step up license from Standard to Enterprise.
the only way to have the Enterprise 2008 Edition is to make th edowngrad efrom 2012 Standard to 2008 Enterprise. it means that if you purchase the 2012 R2 Standard Edition, you may downgarde to Enterprise 2008/2008 R2. th ebest way to make the downgrade
to 2008 R2 Enterprise is to purchase the current Version 2012 R2 Standard in volume licensing than you can download diretly from VLSC the Enterprise Edition.
with your downgrade you can still using the 2008 CALs.
thanks
diramoh

Using Windows Server 2012 VL Product key with Windows Server 2012 R2

Hi all,
Trying to use a Server 2012 vl product key to active a Server 2012 R2, but running into issues, namely it is not accepting the key. I have read many threads pointing out that different keys are required, but no mention of the process that one needs
to take in order to obtain/swap product keys? Any ideas appreciated? :)

The product key I have is for Windows Server 2012 Standard VL, (It's not a DC).
I have downloaded the evaluation iso for Windows Server 2012 R2 and want to licence it (with a VL), but it is failing with the Windows Server Standard 2012 VL product key.
My question is - am I doing something wrong, or do I need to ask Microsoft to change the product key / buy a new one? - What steps do I need to take?
The product key for WS2012 will not work for WS2012R2. (so, yeah, you're doing that wrong)
WS2012R2 is not a "free" upgrade from WS2012 (it's different to Win8.0 -> Win8.1)
Your WS2012 pkey will work with WS2012. To use WS2012R2 you need a WS2012R2 pkey.
If you want to "convert" an evaluation license install, into a full licensed install, you must match the version (2012 vs. 2012R2) and the edition, and must use DISM as well as the correct pkey.
http://technet.microsoft.com/en-us/library/jj574204.aspx
If you don't have the correct pkey for WS2012R2 already, and you don't have one waiting for you in the Volume Licensing Service Center website, you'll need to purchase a new license for WS2012R2.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server

Respected Sir,
We have RDS Server 2012 CAL license select plus but we want to use Windows Server 2008 R2 RDS so is it possible to use 2012 RDS license in RDS 2008 Server?
if yes how can put this.
Waiting for your reply.
thanks,
Hiren Patel
+91 9974091230

Hi,
RDS 2012 CALs can license 2008 R2 and 2008 session hosts. However, RDS 2012 CALs only can be installed on the 2012 Licensing server.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Shadow copies tab is missing from ReFS on Windows Server 2012

We're currently designing a new infrastructure based around Windows Server 2012 so I'm currently investigating all the new technologies, including whether we should format the file server drive in ReFS format - and what problems we might encounter. I'm aware
that it's not a good choice for SQL due to lack of sparse files but for a plain-vanilla file system, it might be a good thing to use.
However, we currently use scheduled Shadow Copies to allow users to recover accidentally deleted/corrupt files during the day before the nightly backup kicks in. In my lab environment, I've just created two drives. One formatted as NFTS and the other formatted
as ReFS.
When I look at the properties of the NTFS drive, Shadow Copies tab is there:
Including the F: drive - the ReFS drive.
However, when I bring up the properties of the F: drive, the Shadow Copies tab is missing:
So to configure shadow copies on ReFS drive, you have to select an NTFS drive and then select the ReFS volume.
A little bizarre?
Cheers, Rob.

Hi Rob.
What if you:
start Computer Mangement.
Open System Tools
Right Click Shared Folders
Select All Tasks -> Configure Shadow Copies
Do you see/can configure both disk available there?
Via cmd can you list the volumes that vss knows about using:
vssadmin list volumes
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Even if you are not the author of a thread you can always help others by voting as Helpful. This can
be beneficial to other community members reading the thread.
Oscar Virot

Using Windows Server 2012 guest on Windows Server 2008 R2 HyperV?

Hey,
I will like to ask if we can run Windows server 2012 guest OS on Windows Server 2008 R2 Hyper-V?
Jackson Yap APC Hosting http://www.apc.sg/

Yes. That's how I got used to the OS before it was released. I had my 2008 R2 SP1 Hyper-V host and installed Windows Server 2012 virtual machines.
However, do note that it is not listed as a supported operating system by Microsoft -
http://technet.microsoft.com/en-us/library/cc794868(v=WS.10).aspx
tim

What is the best practice to connect 2 sites and replicate ADDS between 2 different sites using windows server 2012 r2?

I found that there is new features remote access inside windows server 2012 r2 which is much more easier. Is there anybody can suggest me how to connect 2 different sites and it will be the tunnel to replicate ADDS (RW) between both sites.

See this
https://social.technet.microsoft.com/Forums/windowsserver/en-US/133e7780-6a59-4bd7-906b-70830bea48d0/sites-connections-best-practice?forum=winserverDS
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Using Windows Server 2012 Essentials - Creating a virtual PC running Windows 7

I have a lot to my question, but I am hoping someone out there will be able to answer it, or at least part of it for me.
My situation is I have a Centon InfiniTV 6 turner card, which means that the computer would need to be running 24x7 to record TV shows.
Which is ok, I have no problem with that. I also have a home network with all computers are able to access the recordings.
I would really like to have some server software running to help keep things better organized and also be able to access the files and stuff remotely if needed.
This is why I purchased Windows Server 2012R2 Essentials.
I have not tried to install the tuner card software on the operating system; because it is only for Windows 7 and 8, so I would think it would not work.
What I want to do is have my Windows Server 2012R2 Essentials running as the primary operating system.
Then create a virtual PC to run my copy of Windows 7, and have it use the turner card that I have installed on the computer.
This is the first question, is there any way of doing this?
From what I have read online is that Essentials does not support virtual PC’s because it does not come with hyper-v.
Is that something that can be downloaded or purchased separately from Microsoft?
I have installed the free copy of Oracle Virtual Box, but for some reason that does not show any operating system over 32 bit.
All of my software is running at 64 bit. If I can get Virtual Box working, would that fix all my issues?
Next question, is there any easy way to make a copy of my current running Windows 7 and use that to create a virtual PC running on the server?
Or will I have to reinstall it, and everything associated with it to make it work correctly?
I guess the last question would be, is there any way of using a free SSL certificate with the server operating system?
I have tried a few things that I found online, even followed all the steps from a YouTube video but none seem to work.
I am not sure if it is worth the $70 per year just to access my computer remotely once or twice a month.
Any help would be great! Thanks in advance

Hi,
For license related questions we recommend you contact Microsoft licensing specialist.
http://support.microsoft.com/kb/141850/en-us
Regards.
Vivian Wang

Cannot view downloads from Internet

My BlackBerry won't open files that I downloaded or it shows a blank page.
It recently said Can't find default app.
Thanks. (sorry if you've seen this post on community page.)

spolger wrote:
I was trying to download a program from a website where I could upload BlackBerry videos there and share them with friends. That's where I got a message saying can't find default app.
You still haven't answered what kind of files and from where. I can't help you very well with vague answers, I tried but doesn't seem you want tell?
PDF files should open fine. There are MANY various "flavors" of PDF files, however, and some might not be compatible, and some PDF files that are quite large in file size might have some issues.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Live Migration Fails with error Synthetic FiberChannel Port: Failed to finish reserving resources on an VM using Windows Server 2012 R2 Hyper-V

Hi, I'm currently experiencing a problem with some VMs in a Hyper-V 2012 R2 failover cluster using Fiber Channel adapters with Virtual SAN configured on the hyper-v hosts.
I have read several articles about this issues like this ones:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baca348d-fb57-4d8f-978b-f1e7282f89a1/synthetic-fibrechannel-port-failed-to-start-reserving-resources-with-error-insufficient-system?forum=winserverhyperv
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
But haven't been able to fix my issue.
The Virtual SAN is configured on every hyper-v host node in the cluster. And every VM has 2 fiber channel adapters configured.
All the World Wide Names are configured both on the FC Switch as well as the FC SAN.
All the drivers for the FC Adapter in the Hyper-V Hosts have been updated to their latest versions.
The strange thing is that the issue is not affecting all of the VMs, some of the VMs with FC adapters configured are live migrating just fine, others are getting this error.
Quick migration works without problems.
We even tried removing and creating new FC Adapters on a VM with problems, we had to configure the switch and SAN with the new WWN names and all, but ended up having the same problem.
At first we thought is was related to the hosts, but since some VMs do work live migrating with FC adapters we tried migrating them on every host, everything worked well.
My guess is that it has to be something related to the VMs itself but I haven't been able to figure out what is it.
Any ideas on how to solve this is deeply appreciated.
Thank you!
Eduardo Rojas

Hi Eduardo,
How are things going ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot view webpages from internet using windows server 2012.

Similar Messages

Maybe you are looking for