Canon 600D still not supported in L/R 4

Very disappointed as I contacted Adobe a while ago asking when tethered shooting would be available for the Canon 600D.
Russ

"On the other hand : the fact that OSX / iSync can't find available services on my SLVR over Bluetooth is clearly a problem caused by Apple...
...my SLVR complies with (all) Bluetooth-communications-standards, since it can sync with Windows PCs and swap files with other Bluetooth devices (non-Motorola GSMs for insatance) flawlessly...
You are totally wrong... the fact it works with Windows does not mean that it's not Motorola's fault. In facts, if you think correctly:
- Mac OS X has no such problems with all other bluetooth devices/phones
Motorola only did check that his phone worked in Windows (if not, they wouldn't have released it). This means that Windows seems tolerant to whatever bug the Motorola phone has. This is quite typical... lots of other devices have hard bugs that were never discovered by their manufacturer because their only test bed is one peer: Windows, which has bugs too.
This does not mean that Apple can't do anything: Apple will have to understand what the bug is and why Windows does not trigger the bug then try to workaround it. Apple already does that kind of stuff in its system. This is a good short term policy (to make the user happy) but a pretty bad one long term as that means that Apple has to put lots of "hacks" throughout the system to "mimic" Windows bugs.
You should complain to Motorola not having a more robust testing process.

Similar Messages

Firefox mobile 6 is still not support flash playing?

Waiting for several months, ff6 mobile is still not support flash playing...have a bit disappointed!

Adobe and Google made several non standard changes to the standard plugin system. This has required the engineers working on Firefox mobile to try and understand the changes without any guidance from Adobe or Google. This takes a lot of effort and is not trival.

Does NW7.4 ABAP stack still not support usernametoken with digest password?

Hello, experts,
I got the message from here Username Token with digest password on AS ABAP that NW7.0 ABAP STACK can't support usernametoken with digest password.
Does NW7.4 ABAP stack still not support usernametoken with digest password?
or can I custom the method VERIFY_USERNAME_TOKEN in CL_WS_SECURITY_PROFILE to support usernametoken with digest password?
or does sap have any plan to support this security requirement?
Many thanks.
fangzj

I asked my experts about your question. On the client side we support this. We cannot support digest passwords on the server side. We save passwords in hashed format on the server side. To support digest passwords, the client would either need to send the password in clear text so that the digest can be calculated or the server would have to store the password in clear text, so that the digest password can be calculated. From a security standpoint these are questionable ideas. Either an eavesdropper is picking up the passwords from the traffic or the attacker who breaks the server suddenly has all the passwords in clear text.
You can modify the method VERIFY_USERNAME_TOKEN, but if an upgrade comes along that changes this package, you'll be prompted for a correction import. Then you will either have to skip the upgrade or lose your customization.
-Michael

Mobile Vikings still not supported as carrier

hello
Mobile Vikings is still not supported carrier in IOS 6..
Too bad...Will it be supported ever?

They don't respond individually to feedback, but rest assured that they read everything you send them.
You can't assume that Apple isn't making plans with Mobile Vikings to add them as a carrier. You can only wait and see.

AIR 3.9.1030 Still Not Support iOS 7 Icons

Hi,
After all the discussion in the beta and here about this, it still looks like to me that the latest released build STILL does not support the new icon sizes 76x76, 120x120, & 152x152. If you look at the AIR_Descriptor.3.9.xsd schema file, it clearly is missing these definitions, and as a result, people using IDE's like Intellij won't be able to compile there project because it will error out. I thought this was fixed?

Hi
Could you use AIR 3.9 release AIR SDK from   http://www.adobe.com/devnet/air/air-sdk-download.html try again? following SDK/templates/air/descriptor-template.xml file 76x76, 120x120, & 152x152. had suppored.
Please refer to revelant tag in /descriptor-template.xml file.

Thanks
-Bo

Recent air sdk (air 4.0 beta) is still not support xxhdpi

my application is set applicationDPI = '320'. and is working well in hdpi, xhdpi etc devices...
but new devices like galaxy S4 is 1920x1080 xxhdpi.
air 3.9, and this 4.0 version is not support that dpi, then my app layout is still broken.
this bug is fixed on Apache Flex SDK. so I used that sdk. but i want official adobe air sdk. is have adobe plan of resolving this?..

I agree - this is not working for me either. Here are more details:
I'm having a similar issue where an iPad Mini w/ Retina display appears to be a low res deivce:
Apache SDK 4.12
FlashBuilder 4.7
.ipa compiled on both Mac and PC
tried pointing to an iOS 5.1 SDK during compile on both Mac and PC
app descriptor:
<iPhone>
        <InfoAdditions><![CDATA[
             <key>UIDeviceFamily</key>
             <array>
                    <string>1</string>
                    <string>2</string>
               </array>
               ]]>
        </InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
</iPhone>
Test app reports -
Capabilities.screenResolutionX: 768
Capabilities.screenResolutionY: 1024
Capabilities.screenDPI: 132
stage.fullScreenWidth: 1024
stage.fullScreenHeight: 768
I'm expecting higher resolution and DPI. Any ideas why?
Test code is here:
https://www.dropbox.com/s/u072ou6enxa54k9/src.zip
Please let me know what else I can provide in order to help troubleshoot.

On which platforms is Java6 SDK still not supported?

Is there some up-to-date document that gives an overview of which version of Java is available where? It seems Java5 has reached its end of service life, but then, people keep telling me that some Mac/Apple platforms still do not have Java6 available on them - which would mean that any project that should run an as many platforms as possible would still be compatible with Java5.
So does anyone know the facts on Java6 support on Macs and is there some place where one can keep track of which version is compatible with what platform?

johann_p wrote:
Unfortunately these pages do not explicitly state where Java6 is NOT supported.It's far easier to state where it IS supported.
So unless one has a real good knowledge of Apple platforms one is still a bit in the dark.I'm not a "Mac Guy", but the following passage seemed pretty clear to me:
Java for Mac OS X 10.5 Update 2
Java for Mac OS X 10.5 Update 2 delivers improved reliability and compatibility for Java SE 6, J2SE 5.0 and J2SE 1.4.2 on Mac OS X 10.5.4 and later. The release updates Java SE 6 to version 1.6.0_07, J2SE 5.0 to version 1.5.0_16, and J2SE 1.4.2 to 1.4.2_18.
And so on.
If the FAQ I found is up-to-date, the OS still comes with Java5 initially so that is rather sad. Overall Apples support for Java seems to be rather disappointing."Mac OS X is the only major consumer operating system that comes complete with a fully configured and ready-to-use Java runtime and development environment."
<shrugs />
~

Canon .MXF files "Not Supported"

I sent a project file over to a colleague to help out with an edit, and we're using .MXF files from a C300. I created the project file and imported the clips, everything was fine on my end; my colleague was able to open the project and locate the clips, but when she tried to connect the clips to the Premiere project file she was told that the .MXF clips were "not supported". Can't understand why, considering we're both using the latest version of Premiere Pro CC and the same clips - and they worked fine for me.
I'm using a PC and she's using a Mac - not sure if that has anything to do with the problem...
Any help would be greatly appreciated, thanks!

Hi Kinbote,
See if this article helps you: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ho w-to
More info: FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
Thanks,
Kevin

Latest Prelude CC Update - GoPro Files Still Not Supported?

Hi Forums,
I just updated my Prelude CC software. It claims it now offers support for GoPro files. However I'm ingesting those files and they still won't work with it (.mp4). Anyone else having this issue? Maybe the software is just fine and it's something on my end?
Thanks!
-JD
iMac late 2012, 3.4 GHz Intel Core i7, 15 GB RAM, OSX 10.9

I'm not having any problems. Just Ingested 32 Gigs of Go Pro 1080P-30pfs footage without any problems
I'm running with a Hero 3 Black edition with the latest firmware.
I did copy all of the MP4 Files to an external drive using a USB 3.0 card reader prior to doing the ingest and tagging. I don't copy over any of the other files on the disk either. Just the MP4 Files.
Don't know if that makes a diffrence.

N97 still not support MP4. 3GP

i already update my mobile software still it is not playing video. Picture is playing but no sound. I use nokia software to convort these file.still it is not playing but all these file are support very well in samsung. Lg and spice mobile

Hi kalinga,
Thank you for your post and welcome to the forums!
It may be that the audio has been encoded in a format that your phone is not able to play. When you transcode a video, make sure that the audio track has been encoded in one of the following formats: AAC, AAC+, AMR-NB, AMR-WB, AU, AWB, HE-AAC v2, M4A, MP3, MP4, WAV, WMA, WVE. For maximum compatibility, I would go stereo AAC or MP3.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Is ReFS on External (e.g., USB) Drives Still Not Supported in Win 8.1?

I've been running an internal disk drive on ReFS under Windows 8.1 since late last year, and have had nothing but perfect operation from it.
I know that originally, when Win 8 came out, it was not possible to format an external USB drive to ReFS. It would clearly be a good choice, given that an external drive might be more prone to taking on errors than an internal one.
I was just wondering whether the restriction might have been lifted in Update 1, and an external drive can now be formatted ReFS. I am going to try when I get a little time, but I was just wondering if anyone's already braved the territory.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Follow up:
Upon a reboot after updating some other software, the system did not come back up right with the "MiniNT" registry tweak listed above.
Some problems noted:
1. Drive letter H: ended up assigned to my System Reserved partition instead of the USB drive, which could not be seen.
2. Some applications failed to start with messages like "The procedure entry point _ftol2 could not be located in the dynamic link library C:\Windows\SYSTEM32\comdlg32.dll".
3. The system had trouble accessing the event logs with error -50.
4. CHKDSK showed some problems on drive C:, but could not correct them.
Removal of the MiniNT key restored proper operation, and the ReFS formatted drives are still available.
Make SURE you remove the "MiniNT" key after formatting is complete if you use the tweak at the WinAero site to enable ReFS formatting.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Does Monitor still not support reading accounting files?

Since GroupWise 8 my monitor does not process any gateway accounting
files. In GroupWise 7 this was a great feature - ecspecially if you
want to do some advertizing why the monitor is so helpful.
There is only one very old TID telling us has been reported to
developement. Reporting is not enough - pls fix it.

Diethmar,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Still not supporting relative size of objects?

Hi everybody!
Am I blind? Just downloaded and installed iWork '09, hoping they added the possibility to adjust the size of objects like pictures in a relative manner, finally.
Let's say, you have some screenshots for creating a documentary. All of different sizes. You want all of them to appear in your Pages document at 50 % of their original size. How can you manage this? I still didn't find a way for this simple task.
Have I really to use Word for Pages can't help me with this?
Regards,
Olaf

Apple deliver with the operating system several scripts allowing us to manipulate our pictures.
Here is one of them edited to divide the pictures dimensions by two.
--[SCRIPT Half_size}
property done_foldername : "Reduced Images"
property originals_foldername : "Original Images"
property newimage_extension : "jpg"
-- the list of file types which will be processed
-- eg: {"PICT", "JPEG", "TIFF", "GIFf"}
property type_list : {"TIFF", "GIFf", "PNGf", "PICT", "JPEG"}
-- since file types are optional in Mac OS X,
-- check the name extension if there is no file type
-- NOTE: do not use periods (.) with the items in the name extensions list
-- eg: {"txt", "text", "jpg", "jpeg"}, NOT: {".txt", ".text", ".jpg", ".jpeg"}
property extension_list : {"tif", "tiff", "gif", "png", "pict", "pct", "jpeg", "jpg"}
on adding folder items to this_folder after receiving these_items
tell application "Finder"
if not (exists folder done_foldername of this_folder) then
make new folder at this_folder with properties {name:done_foldername}
end if
set the results_folder to (folder done_foldername of this_folder) as alias
if not (exists folder originals_foldername of this_folder) then
make new folder at this_folder with properties {name:originals_foldername}
set current view of container window of this_folder to list view
end if
set the originals_folder to folder originals_foldername of this_folder
end tell
try
repeat with i from 1 to number of items in these_items
set this_item to item i of these_items
set the item_info to the info for this_item
if (alias of the item_info is false and the file type of the item_info is in the type_list) or (the name extension of the item_info is in the extension_list) then
tell application "Finder"
--set name of this_item to "YK#" & (text -4 thru -1 of ("0000" & i))
my resolveconflicts(thisitem, originals_folder, "")
set the new_name to my resolveconflicts(thisitem, results_folder, newimage_extension)
set the source_file to (move this_item to the originals_folder with replacing) as alias
end tell
processitem(sourcefile, new_name, results_folder)
end if
end repeat
on error error_message number error_number
if the error_number is not -128 then
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end if
end try
end adding folder items to
on resolveconflicts(thisitem, target_folder, new_extension)
tell application "Finder"
set the file_name to the name of this_item
set file_extension to the name extension of this_item
if the file_extension is "" then
set the trimmed_name to the file_name
else
set the trimmed_name to text 1 thru -((length of file_extension) + 2) of the file_name
end if
if the new_extension is "" then
set target_name to file_name
set target_extension to file_extension
else
set target_extension to new_extension
set target_name to (the trimmed_name & "." & target_extension) as string
end if
if (exists document file target_name of target_folder) then
set the name_increment to 1
repeat
set the new_name to (the trimmed_name & "." & (name_increment as string) & "." & target_extension) as string
if not (exists document file new_name of the target_folder) then
-- rename to conflicting file
set the name of document file target_name of the target_folder to the new_name
exit repeat
else
set the name_increment to the name_increment + 1
end if
end repeat
end if
end tell
return the target_name
end resolve_conflicts
-- this sub-routine processes files
on processitem(sourcefile, new_name, results_folder)
-- NOTE that the variable this_item is a file reference in alias format
-- FILE PROCESSING STATEMENTS GOES HERE
try
-- the target path is the destination folder and the new file name
set the target_path to ((results_folder as string) & new_name) as string
with timeout of 900 seconds
tell application "Image Events"
launch -- always use with Folder Actions
set this_image to open file (source_file as string)
scale this_image by factor 0.5
save this_image as JPEG in file target_path with icon
close this_image
end tell
end timeout
on error error_message
tell application "Finder"
activate
display dialog error_message buttons {"Cancel"} default button 1 giving up after 120
end tell
end try
end process_item
--[/SCRIPT]
If you don't know the way we use that, enter the Finder's Help and search for "folder action".
Yvan KOENIG (from FRANCE vendredi 16 janvier 2009 20:26:11)

Olympus E-500 is Still Not Supported iPhoto6 10.4.5 OSX

Please add RAW File support for this camera NOW!

"On the other hand : the fact that OSX / iSync can't find available services on my SLVR over Bluetooth is clearly a problem caused by Apple...
...my SLVR complies with (all) Bluetooth-communications-standards, since it can sync with Windows PCs and swap files with other Bluetooth devices (non-Motorola GSMs for insatance) flawlessly...
You are totally wrong... the fact it works with Windows does not mean that it's not Motorola's fault. In facts, if you think correctly:
- Mac OS X has no such problems with all other bluetooth devices/phones
Motorola only did check that his phone worked in Windows (if not, they wouldn't have released it). This means that Windows seems tolerant to whatever bug the Motorola phone has. This is quite typical... lots of other devices have hard bugs that were never discovered by their manufacturer because their only test bed is one peer: Windows, which has bugs too.
This does not mean that Apple can't do anything: Apple will have to understand what the bug is and why Windows does not trigger the bug then try to workaround it. Apple already does that kind of stuff in its system. This is a good short term policy (to make the user happy) but a pretty bad one long term as that means that Apple has to put lots of "hacks" throughout the system to "mimic" Windows bugs.
You should complain to Motorola not having a more robust testing process.

Does Firefox for Mac still not support Lion-style scrollbars?

I notice running Firefox on OSX Lion, the scrollbars are of the old style still. Have they really not implemented this yet?

Will be in firefox 23
https://bugzilla.mozilla.org/show_bug.cgi?id=636564

Canon 600D still not supported in L/R 4

Similar Messages

Maybe you are looking for