Cant open custom IR reports In Custom Reports menu Hy.Per. Scorecards

As is wroten in readme file "The generic Oracle Hyperion Interactive Reporting BQY files provided with this release that you can use to generate custom reports may cause javascript or single sign-on errors when you access them from the Custom Reports menu. Custom Interactive Reporting BQY files work as expected."
May be someone know how to open other custom Interactive Reporting BQY files. Smartcut of imported files into workspace dont work and is caused error on the page. Need to open them from Custom Reports menu
Edited by: user10583191 on Nov 10, 2008 2:43 AM
Edited by: user10583191 on Nov 10, 2008 2:44 AM

Similar Messages

Customer Open Balance Aging Report S_ALR_87012178

hello,
we are using this report Customer Open Balance Aging Report S_ALR_87012178 but when run, it brings customers' names from VD03 search field, instead it would be handy to see full names from Name-field. I understand S_ALR_87012178 is a static report, but my question would be is there any other transaction/report which shows the same but with customers' full name?
thanks in advance

S_ALR_87012178 is the only standard customer aging report.
Following two solutions I could think of to fit your requirements.
Develop a custom report by copying standard customer reports that have full customer name and make changes according to your need.
Or
In report S_ALR_87012178 the customer name is populated in Address field. So you can use this field as your customer name and develop a custom report.
Thanks

Customized responsibility not run " Supplier Open Balance Letter Report"

I have customized standard Responsibility from " Payable Manager " , this Responsibility run the " Supplier Open Balance Letter Report" with completed Error Status . ?
Even it has same Request Group " All Reports " and " Payables " Application.
The Error Message in the log is =
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
needs help urgently.
Message was edited by:
alihaddawi

Dear,
I have Enabled the parameters ( Debug Flag , Trace Flag) with checking Display of both , ran the Report got that from LOG this one:
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXSOBLX module: Supplier Open Balance Letter
Current system time is 23-SEP-2007 09:46:02
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_AS_OF_DATE='2007/09/01 00:00:00'
P_SUPPLIER_NAME_FROM='BABYLON Eagles Security Co.'
P_SUPPLIER_NAME_TO='BABYLON Eagles Security Co.'
P_CURRENCY='USD'
P_INCLUDE_PREPAYMENTS='Y'
P_MIN_INVOICE_BALANCE='0'
P_MIN_OPEN_BALANCE='0'
P_DEBUG_FLAG='y'
P_TRACE_FLAG='y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
LOG :
Report: F:\oracle\prodappl\ap\11.5.0\reports\US\APXSOBLX.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
ERR REP-1401: 'beforereport': Fatal PL/SQL error occurred.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 268930.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 23-SEP-2007 09:46:03
---------------------------------------------------------------------------

Interactive Report - Add a 'custom' Action Menu Item

Hi,
I'm wondering if it is possible to add 'custom' Action menu items to an interactive report?
I have a situation where I want to use all the richness that an interactive report gives with it's out of the box functionality, then if a download is selected I need to be able to set a 'lock' on the currently selected records set before the records are downloaded.
I've had a good look around the forum and various other sites and I can't seem to find anything in this area. The nearest I can find is on the OBD tutorials the ability to add a 'Reset' button.
I know how to create custom download functionality, to which I could add the required record locking functionality and in turn link to a button, but what I don't know how to do is pull out the selection variables from the Interactive Report in order to construct my select query.
Maybe I'm barking up the wrong tree and there's a better way if so any suggestions would be most welcome.
Many thanks in advance Peter..
Edited by: Pete on Jun 30, 2011 4:16 PM
Edited by: Pete on Jun 30, 2011 4:24 PM
Edited by: Pete on Jun 30, 2011 4:31 PM

Hi,
For your issue, in SharePoint Designer, Click Custom Action->View Ribbon->Create Custom Action.
Then the extra form will show up in the Ribbon.
Refer to the following link:
http://www.abelsolutions.com/totm/creating-a-custom-action-in-2-steps-with-sharepoint-designer/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Installed BOE XI R3.1 Client tools now I cant open crystal reports?

After I unistalled the client tools I cant open Crystal Reports from local drives. I can from BOE, but not local or network drives. Plus all the Icons from these drives have been removed. What did I do wrong?

Need more info and it's not clear what you did or what is left on your PC but typically which ever CR product you still have installed going to the Add/Remove software and doing a Repair install on Crystal Reports Designer should fix the problem.
Thank you
Don

TS5376 i GET THIS ERROR REPORT WHEN ITRY TO UNINSTALL ITUNES FROM MY COMPUTER . . THE FEATURE YOU ARE TRYING TO USE IS ON A NETWORK RESOURCE THAT IS UNAVAILABLE . I NOW CANT OPEN OR USE ITUNES AT ALL

When i try to uninstall itunes to enable me to reinstall i get this message . the feature you are trying to use is on a network that is unavailable .( 'itunes msi' is the resource i cant find ) i now cant open or update itunes any ideas

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Open Sales Order Report

Hello..
my client wants to have the open sales Order report in following format :
======================================================================================================
Customer Name | Item 1 code | Item 2 code | Item 3 code | Item 4 code | Item 5 code | Item 6 code | Item 7 code |
=======================================================================================================
Jack Inc.......................987.................865.....................654.................543.......................739..................543...................987
Colt Inc.......................237.................213.....................799..................321.......................875...................187...................122
IOUU LLC...................127.................535.....................654..................777.......................211...................345...................777
=====================================================================================================
.................................1351..............1613...................2107.................1641.....................1825.................1075..................1886
=====================================================================================================
pls help me to create sql query for the above
rekha
Edited by: Rekhatiwari on Dec 16, 2010 10:46 AM
Edited by: Rekhatiwari on Dec 16, 2010 10:47 AM

Hi,
Try this:
SELECT T0.CardName,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%2\]') Item1,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%3\]') Item2,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%4\]') Item3,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%5\]') Item4,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%6\]') Item5,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%7\]') Item6,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%8\]') Item7
FROM ORDR T0
WHERE T0.docdate between [%0\] and [%1\]
That might be the only way close to your requirement.
Thanks,
Gordon

Aged open items revaluation report

I was wondering if anyone knows of a report that would give you the same information as the open items revaluation report only aged. The aging reports that are in the system are only point in time. We're looking for an historical aging report. Does anyone know if a report like that exists?
Thanks,
Todd

Hello ...
You must enter the LDP clicking the pencil icon that appears in the toolbar when the window is open open items list.
Once there, create 2 new text fields, one with the text "Orders" and another that says "Customer Orders". Both fields were identified as Field_XXX and Field_YYY (where XXX and YYY are numbers that appear in their fields)
There is a field of variable rate system, which is what lets you see the description of the type of document. (Orders, Customer Orders, etc.).. This field corresponds to variable 100 (check it that way), we assume that this field is the field F_ZZZ within the layout.
Create 2 fields of type formula, the formula to edit it (Field_XXX == Field_ZZZ) and (Field_YYY == Field_ZZZ) respectively.
Create 2 text fields (these are only to test the application, then to understand the functionality can not delete them or leave them visible). Set in one of these areas, the letter "A" in the second field and set the letter "B". both camps can put one over the other in the layout.
Now comes the application of the field ... "A" condicionelo one of the formula fields and country "B" condicionelo another formula field. The conditional mode is to set the formula field in the general tab LINK A. ..
Try then see a preview of both reports and can see that depending on the type of document you will see "A" or "B" as appropriate.
Apply the same logic as those fields that you will create and generate the difference between formats.
I hope this will be helpful
Best Regards,

Print Layout Designer / Open Items List Report

When I open the Reports>Sales and Purchasing>Open Items List report - How can I associate a different Print Layout depending on which Document Type is then selected from the drop down list..
Eg. When I print a list of Open Purchase Orders I want to us a different print template than when I print a list of Open Sales Orders ?
Thanks for any pointers..
Karen

Hello ...
You must enter the LDP clicking the pencil icon that appears in the toolbar when the window is open open items list.
Once there, create 2 new text fields, one with the text "Orders" and another that says "Customer Orders". Both fields were identified as Field_XXX and Field_YYY (where XXX and YYY are numbers that appear in their fields)
There is a field of variable rate system, which is what lets you see the description of the type of document. (Orders, Customer Orders, etc.).. This field corresponds to variable 100 (check it that way), we assume that this field is the field F_ZZZ within the layout.
Create 2 fields of type formula, the formula to edit it (Field_XXX == Field_ZZZ) and (Field_YYY == Field_ZZZ) respectively.
Create 2 text fields (these are only to test the application, then to understand the functionality can not delete them or leave them visible). Set in one of these areas, the letter "A" in the second field and set the letter "B". both camps can put one over the other in the layout.
Now comes the application of the field ... "A" condicionelo one of the formula fields and country "B" condicionelo another formula field. The conditional mode is to set the formula field in the general tab LINK A. ..
Try then see a preview of both reports and can see that depending on the type of document you will see "A" or "B" as appropriate.
Apply the same logic as those fields that you will create and generate the difference between formats.
I hope this will be helpful
Best Regards,

Open a crystal report from WAD with passing the variables values

Hi,
I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking WAD (web template) as a source to crystal report or crystal report called in WAD.
Please suggest something on same.
Thanks
Take care
Vishal sharma

Hello Vishal.
Did you find a solution for this problem?
I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
Have found an answer to this issue? If yes, please kindly inform how have you solved this.
Best Regars
Armando Santos

Can i open a existing report using a report generation toolkit

Hello All,
Suppose I create a new excel report today and close the program, Tomorrow I open the same program and instead of creating a new excel file, i need to update the test results data into the excel file which was created yesterday, is this possible.
I am confused because there is no option called Open report in report generation toolkit, it just has create new report option.
Probably NI Guys can work on this...sorry if it is a;lready existing?
Is there any method to open a existing report?
Pls help.....
Thanks
Solved!
Go to Solution.

Hi,
I have a similar problem. I'd like to use Report Generation Toolkit to enter data into some cells in the active worksheet of the active workbook but it seems impossible?! The user has in beforehand opened the desireed workbook and activated the desired worksheet. I use the 'New Report' VI with the template input set as the path of the active workbook (some self-made ActiveX calls to get the path). When this VI is run, howevere, the excel file is sort of re-opened and another worksheet becomes the active one.
I tried to make a customized copy of New Report.vi, New Report subVI.vi and Excel_Open_Workbook.vi so that the Report object works with the currently active workbook and worksheet, but I failed due to my lack of knowledge in LV classes and such things. It would've been an ugly solution anyway to have custom low-level VIs that does not follow when the RepGen Toolkit develops in the future.
Best regards,
Andreas Nilsson

Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK?

Dear all
Is it OK to open a CR Report with JRC/Gemini which is modified by RAS SDK? Especially after I use RAS SDK to change report database location.
I test it OK, but my Customer need to confirm this.
Thanks a lot.
David

RAS SDK - meaning RAS server?
There's intrinsic limitations for Crystal Reports Java (JRC for CR4E Version 2), such as database connectivity (only Java-based ones) when compared to RAS server.
But CRJ does support Crystal Reports 2008 reports within those limitations.
By the way, the new CR4E Version 2 Crystal Reports Java SDK is essentially the in-process RAS SDK - so you can make modifications using that. Note that JRC SDK (version 11.8 and below) are deprecated with CR4E Version 2), then new way si the the Crystal Reports Java SDK.
Sincerely,
Ted Ueda

Macro to open Team folder reports

Has anyone figured out how to open a (server) report located in a Team folder other than company? I've tried the OPENWEBFILE macro, but this appears to only work within the Company team folder.
Unfortunately, I can't use native VB to open because IT is blocking access to the webfolders...so I must use outlooksoft's "wrapper" to get at the files.
My goal is to create a workbook containing links to all reports for all teams. Any suggestion is greatly appreciated!

Have you tried using BPC menus, BPC Web, or even BPFs. Each of these can be used to access templates.
From the user guides;
WEB
Web is a zero footprint client that allows you to publish reports and other documents and
other unstructured documents, create and analyze live reports, view KPIs on a dashboard, and perform
predictive analysis.
Menus
After creating custom menus in OutlookSoft for Excel, you can define security for them and add them to
the custom menu list in the OutlookSoft for Excel action pane. Once they are added to the list, they are
available to the appropriate users for selection in the action pane upon opening OutlookSoft for Excel.
There are two types of custom menus: a default custom menu and a team custom menu. Users will see
one type or the other, depending on their team affiliation and the custom menu setup. The default custom
menu is defined on the EV_DEFAULT tab on the custom menu workbook. If users are not part of a team,
they will only be able to access the default custom menu.
You can define one or more team custom menus that are appropriate to specific OutlookSoft

Hi my firefox crashed and now wont restart, I cant past the crash reporter the crash report id is: bp-1a14605e-a13b-4ae6-b459-ca0792111124 thanks

it suddenly crashed and now wont restart. A crash reporter keeps coming up but nothing happens

I cant even get the internet on, (im currently on my boyfriends laptop) when I turn my desktop on it goes to the crash report but wont let me send it- it then just starts doing its own thing, i cant even log off i just have to turn it off, i cant click on any icons, it wont let me so i cant open firefox in safe mode....any clues?

Photoshop element 8 opens a Crash report while exiting the application (win 7 64bit).

photoshop element 8 opens a Crash report while exiting the application (win 7 64bit). however the program itself is working as we can see the saved data and function it.
However no idea why it opens a crash report when the application exited properly. It's happening almost on 30 computers. re-install PS8 but still the same.
Appreciate your help

Yes please i cant find the source anywhere. I have tried in bunch of computer on all or win 7 64bit but couple of them opening the crash report. Having said that program is working with no issues. it just opens the window when i exit from the application
it happens only under EDIT not on Organise
I have tried uninstalled and re-installed still it doesnt work
Appreciate your help

Cant open custom IR reports In Custom Reports menu Hy.Per. Scorecards

Similar Messages

Maybe you are looking for