Cant write on usb-device
hello,
when i try to copy something onto my usb-drive, i get the error
Error creating directory: Operation not permitted
i just installed udisks to have an automount, maybe there is something i have to configure?
greets lizzy
hello,
berbae wrote:file system type of the drive
fat32
berbae wrote:how do you mount it
just opened it in the file manager, i guess it was automounted by udisks
berbae wrote:how do you intend to copy to it (CLI, file manager, ...)
i just copy pasted in the file manager
barbae wrote: loginctl show-session $XDG_SESSION_ID
loginctl show-session $XDG_SESSION_ID
Id=c1
Name=lizzy
Timestamp=Mo 2014-06-09 18:11:43 CEST
TimestampMonotonic=64745628
VTNr=1
TTY=tty1
Remote=no
Service=login
Scope=session-c1.scope
Leader=231
Audit=0
Type=tty
Class=user
Active=yes
State=active
IdleHint=yes
IdleSinceHint=1402330304070471
IdleSinceHintMonotonic=64825211
thanks for your help, im gonna read the article in more detail now!
lizzy
Similar Messages
-
Cant mount external USB Device?
After Os X Lion installation on MacBook Pro, external devices dont mount?
What kind of external USB device are you having a problem with?
-
Read and write to an USB device without any products from NI
Hi!
Is there any possibility to read an USB device and write to it without any NI products?
I want to measure temperature with several sensors from Dallas (DS18S20).
I'm using Labview 8.2.
Thanks for your help.Hey, I have never used Dallas sensors but I just used Google and found this which might help you.
Also here you can find some basics of using USB in LabVIEW. But USB communication is always a bit tricky. Have fun
LV 2011, Win7 -
Libusb requires write access to USB device nodes [SOLVED]
Hi,
I have used gtkam to upload photos from my camera for some time now - though on an occasional basis because I don't take very many photographs. On attempting to use it today for the first time in a while I find that I can't do so as a user.
"libusb couldn't open USB device /dev/bus/usb/003/002: Permission denied.
libusb requires write access to USB device nodes."
Can anyone tell me how to fix this please?
Last edited by perseus (2011-01-03 22:46:46)I did some additional research and found the udev file for libgphoto2: /lib/udev/rules.d/40-gphoto.rules
I also realized that my camera is not listed in that file:
Bus 001 Device 011: ID 04a9:31f6 Canon, Inc.
I tried to add this device and vendor ID to the list of Canon cameras and restarting udev
ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="31f6", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="proprietary", MODE="0660", GROUP="camera"
# killall udevd && udevd -d
Unfortunately this didn't work out.
I also tried to add the following line to that gphoto udev file as suggested by Digital Cameras wiki
PROGRAM="/lib/udev/check-ptp-camera", MODE="0660", GROUP="camera"
Still nothing after restarting udev...
My next try was adding the camera to the HAL fdi file /usr/share/hal/fdi/information/20thirdparty/10-camera-libgphoto2.fdi and restarting HAL.
This didn't help either.
I'm getting short on clues...
For sure I can access the camera as root but that's not what I want to do.
!! UPDATE !!
I was dumb. PTP cameras are handled separately so I don't need to have the USB IDs in the udev or fdi files.
So the question is why PTP cameras are not handled correctly, why the group for these devices is not "camera"?
Last edited by KoS (2011-01-03 22:19:57) -
my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help
Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
Could I try anything else ?
Cheers Chris -
Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : ) -
Cant connect my ios devices to my mac book air
I cant connect my IOS devices (iphone 4s + ipad 2) to my macbook air mid/2013 by usb or bluetooth.
when connecting by usb the devices dose not charge or sync with itunes. it charges for split a second and disconnect anther time and it go forever in the his loop.
I tried using two cables.
The devices are working on my windows pc.
my macbook works with usb sticks and other android phones.
note:
-both devices are on ios 8.1
-my macbook is on Yosemite
-my ipad 2 worked well before updating my mac to yosemiteiPods that have the Window format should continue to work on a Mac, because Macs can read/write the Windows format used on iPods. (The opposite is not true - Windows cannot read the Mac format.)
You can change the formatting, by doing a Restore on the iPod, but that is done in iTunes, so iTunes needs to see the iPod when you connect it. The Restore will also erase the iPod.
Since it continues to work on your friends Windows PC, your iPod itself is probably OK, so you may want to first look at the connection to the Mac.
Did you use the same USB docking cable when you connected it to your friend's PC? If so, you can rule out the USB cable as the cause. If not, it's possible that your USB cable is faulty.
If you are connecting the iPod to a USB hub, try a direct connection to the Mac's USB port. If other USB devices are connected at the same time, try disconnecting the other devices (except for standard keyboard and mouse if normally used). You may also want to shut down (power off) the Mac, if you have not done so in a while. Also, do this to Reset the iPod
http://support.apple.com/kb/ht1320
Start up the Mac, run iTunes, and connect the iPod by itself to a direct USB port. -
Ipod not recognised by Windows, USB device not recognised
Hi hope someone can help
I have recently received my ipod back from Applecare who have sent the ipod back in ' working order ' but it will no longer be recognised by my windows. It says USB device not recognised and i cant find, nor will it install drivers that i located on the ipod updater etc.
I have tried several methods on this forum but none seem to work.
The letter from mycare says the iPod is formatted for a computer operating Mac OS X. Although i stated wi use Windows. But the leter states this can be changed bu installing the updater, but this wont make a diff as comp still wont regonise the device after i have followed there instructions. Any advice?
ThanksI'm not really up on the complexities of the Windows OS but try this tip I picked up a while back, hopefully it might help.
"USB Device not Recognized in Windows".
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer. -
How can I access an unsupported usb device that's seen by system profiler
is there a way to access an unsupported usb device? my parents bought my daughter a cheap and easy to use digital camera and I am looking for a way to access the photos. the camera's manual mentions that there is no mac driver and there are no plans to develop one. I plug it in anyways in the event the system / Iphoto recognizes this, But I get nothing on the desktop as in a generic disk image icon. I open system profiler and My G4 knows the camera is plugged in. If this interface between the two is recognized how can I access the camera?
does a driver have to be written to allow access? I saw a usb dev kit on version tracker but I have no clue as to how to write a driver. I could get a flash card reader but I was hoping that there may be some back door or an app somewhere to allow me to get the photos off the camera.
thanks!!!Hi, Israel.
You wrote: " I plug it in anyways in the event the system / Iphoto recognizes this"See if Image Capture recognizes the camera. Launch Image Capture, which is in the Macintosh HD > Applications folder.
Otherwise, you're probably going to have to go the route of using a card reader. While the connection may be USB, they may be using some non-standard implementation that requires a driver.
Writing drivers is not something you'd want to even attempt since you didn't create the hardware!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.
Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows PublisherHi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.
-
USB device not recognized with 160G ipod
I did absolutely nothing different, no updates, no hardware upgrades, didn't drop my ipod, suddenly when I plug my 160g classic into my computer vista just says "usb device not recognized" and I cant do anything. I can charge my ipod on my radio dock but that's it. I've tried plugging it into 2 32bit vista desktops, 1 32bit vista laptop, 1 XP laptop, and 1 64bit vista laptop and they all give me the same message. I've tried many different usb ports, and 2 different cables, nothing works. Help please!
I don't know if this will help you, but I was having the same problem and when I sent it off for repair...they sent it back saying it was not under warranty b/c it had liquid damage, etc...bunch of BS! Anyway, I called tech support to do a little venting and the technician said i should try uninstalling itunes, Apple updates, and quicktime which will not mess up your library, etc. Restart and then download newest version of itunes from apple website which i did. I restarted again and then connected IPOD 160G to it and to his credit...Ipod started to connect and be recognized in itunes. I had to restart one more time w/ ipod connected so it would all sync, but bottom line...it worked. Apparently, the itunes/quicktime updates can screw w/ these new ipods causing problems. Why they just don't come out and say that or at least suggest this line of solution when they send an ipod back unrepaired...i don't know....very poor cust service on that end of it. Hope that helps.
-
my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!
try resetting the ipad,or change the cable ,it woould work
-
Using USB device with Virtual Com port
I have an actisys IR USB device that creates a virtual serial port. I can read from it using VISA, however it will not write. I have the same setup working on LV 6.1 running windows 2000. I need to make it work on my system running XP and LV 7.1.
Hello,
Does your Windows 2000/LabVIEW 6.1 system work correctly or do you see the same behavior? It sounds like there may be something wrong with the termination of the command. What termination method are you using? Is your instrument set for that method? You may also want to try using the NI-488.2 Interactive Control. A tutorial on how to use it is located here if needed. This will bypass VISA and LabVIEW. If this works, you may want to update to the latest version of VISA (if you don't already have it) to see if that fixes the issue.
Chris R.
Chris R.
Applications Engineer
National Instruments -
hi guys,
i have a problem with my usb devices.
the dmesg:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
Command line: root=/dev/sda5 vga=0x0361 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7fed0 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000ce000 - 00000000000d0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fed0000 (usable)
modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
modified: 000000007fee3000 - 0000000080000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000007fed0000
0000000000 - 007fe00000 page 2M
007fe00000 - 007fed0000 page 4k
kernel direct mapping tables up to 7fed0000 @ 10000-14000
RAMDISK: 37d42000 - 37fefc39
ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
ACPI: XSDT 000000007fedab41 0008C (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: FACP 000000007fee1bd2 000F4 (v03 Sony VAIO 20070418 PTL 00000001)
ACPI: DSDT 000000007fedbeeb 05C73 (v02 Sony VAIO 20070418 PTL 20050624)
ACPI: FACS 000000007fee2fc0 00040
ACPI: APIC 000000007fee1cc6 00068 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: HPET 000000007fee1d2e 00038 (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: MCFG 000000007fee1d66 0003C (v01 Sony VAIO 20070418 PTL 0000005A)
ACPI: TCPA 000000007fee1da2 00032 (v01 Sony VAIO 20070418 PTL 00005A52)
ACPI: SLIC 000000007fee1dd4 00176 (v01 Sony VAIO 20070418 PTL 01000000)
ACPI: TMOR 000000007fee1f4a 00026 (v01 Sony VAIO 20070418 PTL 00000003)
ACPI: APIC 000000007fee1f70 00068 (v01 Sony VAIO 20070418 PTL 00000000)
ACPI: BOOT 000000007fee1fd8 00028 (v01 Sony VAIO 20070418 PTL 00000001)
ACPI: SSDT 000000007fedbc29 002C2 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb159 0025F (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb0b3 000A6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedabcd 004E6 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 007fed0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
#3 [0037d42000 - 0037fefc39] RAMDISK ==> [0037d42000 - 0037fefc39]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [000082e000 - 000082e204] BRK ==> [000082e000 - 000082e204]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000f8010] f8010
[ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fed0
On node 0 totalpages: 523871
DMA zone: 56 pages used for memmap
DMA zone: 1682 pages reserved
DMA zone: 2245 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515025
Kernel command line: root=/dev/sda5 vga=0x0361 ro
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1994.610 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2053736k/2095936k available (3409k kernel code, 452k absent, 41160k reserved, 1239k data, 464k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.43 BogoMIPS (lpj=6648700)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649976)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7982.67 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, transactions will use polling mode
ACPI: EC: missing confirmations, switch off interrupt mode.
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc003fff]
pci 0000:08:00.0: reg 18 io port: [0x6000-0x60ff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
pci 0000:09:03.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
pci 0000:09:03.0: supports D1 D2
pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.0: PME# disabled
pci 0000:09:03.1: reg 10 32bit mmio: [0xfc102000-0xfc1027ff]
pci 0000:09:03.1: reg 14 32bit mmio: [0xfc104000-0xfc107fff]
pci 0000:09:03.1: supports D1 D2
pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:03.1: PME# disabled
pci 0000:09:03.2: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
pci 0000:09:03.2: supports D1 D2
pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
pci 0000:09:03.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe7f has been reserved
system 00:06: ioport range 0xfe80-0xfeff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.1: IO window: 0x4000-0x4fff
pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0x5000-0x5fff
pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.4: IO window: 0x6000-0x6fff
pci 0000:00:1c.4: MEM window: 0xfc000000-0xfc0fffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
pci 0000:09:03.0: IO window: 0x007000-0x0070ff
pci 0000:09:03.0: IO window: 0x007400-0x0074ff
pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: 0x7000-0x7fff
pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff]
pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff]
pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0a: resource 0 io: [0x7000-0x70ff]
pci_bus 0000:0a: resource 1 io: [0x7400-0x74ff]
pci_bus 0000:0a: resource 2 pref mem [0x88000000-0x8bffffff]
pci_bus 0000:0a: resource 3 mem: [0x90000000-0x93ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 2743k freed
Simple Boot Flag at 0x36 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1249997463.944:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4017
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 8000k, total 14336k
vesafb: mode is 1280x800x32, linelength=5120, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 464k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 29
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: MATSHITABD-MLT UJ-220V, 1.00, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220V 1.00 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
Intel AES-NI instructions are not detected.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
udev: starting version 141
sky2 driver version 1.22
sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:08:00.0: setting latency timer to 64
sky2 0000:08:00.0: Yukon-2 FE chip revision 1
sky2 0000:08:00.0: irq 30 for MSI/MSI-X
sky2 eth0: addr 00:13:a9:c1:09:33
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: SSDT 000000007fedb8e7 0027A (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb3b8 004AA (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 000000007fedbb61 000C8 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI: SSDT 000000007fedb862 00085 (v01 Sony VAIO 20070418 PTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (58 C)
input: PC Speaker as /devices/platform/pcspkr/input/input4
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/virtual/input/input6
ACPI: Invalid active0 threshold
iTCO_vendor_support: vendor-support=0
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (58 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: Battery Slot [BAT0] (battery present)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 2-3: new high speed USB device using ehci_hcd and address 3
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
usb 2-3: configuration #1 chosen from 1 choice
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:09:03.0: Socket status: 30000006
pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwl3945 0000:06:00.0: setting latency timer to 64
ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
usb 5-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
Linux video capture interface: v2.00
input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11
generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
phy0: Selected rate control algorithm 'iwl-3945-rs'
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12
generic-usb 0003:046D:C518.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input13
generic-usb 0003:046D:C518.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f05760
vboxdrv: fAsync=0 offMin=0x1ae offMax=0x125c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa10a9f00
hub 2-0:1.0: unable to enumerate USB device on port 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302564f69]
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Clocksource tsc unstable (delta = -435934901 ns)
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
EXT3 FS on dm-0, internal journal
scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
sd 5:0:0:0: Attached scsi generic sg2 type 0
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
EXT4-fs: barriers enabled
kjournald2 starting: pid 1929, dev dm-1:8, commit interval 5 seconds
EXT4 FS on dm-1, internal journal on dm-1:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem dm-1 with ordered data mode
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
hub 2-0:1.0: unable to enumerate USB device on port 5
iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
wlan0: authenticate with AP 00:11:6b:10:2f:bc
wlan0: authenticated
wlan0: associate with AP 00:11:6b:10:2f:bc
wlan0: RX AssocResp from 00:11:6b:10:2f:bc (capab=0x471 status=0 aid=1)
wlan0: associated
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
hub 2-0:1.0: unable to enumerate USB device on port 5
i think the result is, that my bluetooth and webcam isn't working...
can you help me pls.
regards nigg
Last edited by nigg (2009-08-11 14:14:57)I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09) -
How do I make Lion wake up when a USB device is plugged in?
I'm having this issue on a MacBook Air, but I assume it would occur on a MacBook Pro as well.
What I want to do is to use my MacBook with an external display, and have the lid open so I can use the keyboard/trackpad, but have the MacBook display turned off. There are two obstacles to doing this under Lion:
1. You can start the laptop in clamshell mode with an external display attached, but opening the lid will make it go out of clamshell mode and turn on the MacBook display, going into dual screen mode.
2. Since I don't have a wireless keyboard, the trick that I was using in Snow Leopard to wake up my MacBook was to plug in a USB device. This doesn't work anymore in Lion.
Issue 1 has been resolved by this post:
https://discussions.apple.com/message/16059565#16059565
But I'm still looking for a fix to issue 2. Any help would be appreciated!
PS The solution to issue 1 in the thread above recommends running this command:
sudo nvram boot-args="iog=0x0"
I would imagine there's probably some kind of command that will fix issue 2 as well?Are there any web interfaces for LKML? I dislike mailinglists; the last one I subscribed to randomly stopped sending messages to me after about an hour. I might try usenet; there are some good-looking groups on there I think.
Also, I'm sure there has to be a way to do this outside of udev. I mean, if udev can be made to work without using like 30% CPU (which I'd imagine would be what would happen if it polled every 1 second, which is what I'd want it to do), I'll use it, but what about thinking outside the box a little?
I mean, my first thought was to write a kernel module that responded to dmesg at the kernel level; dmesg doesn't update all that often, and I could run through all the lines I recieve and look for, for example, my PCI ID and a signature telling me if it was added or removed. I just have no idea how to do that.
-dav7
Maybe you are looking for
-
Nokia Music: Mix Radio, Store, Gigs options disapp...
Hi, I have been using Nokia Music on Lumia 710 without an issue until today when I launched it and options for mix radio, store & gigs disappeared. I uninstalled the app and re-downloaded it. On launching it, all options became available but disappea
-
Ipod classic no sound from headphones
My Ipod classic has no sound from the headphones?
-
Invalid response received from device
Hello everyone. "iTunes cannot connect to the iPhone because an invalid response was received from the device." I get this message each time I connect my ipod touch to my computer. I have tried reinstalling itunes, uninstalling apple mobile support a
-
Captcha or activation email?
I'm building a site where people have to register as members. To try and beat the bots, do you think that it's better to have a captcha on registration form, or should I go the whole hog and send out some sort of activation email? Vix
-
Can't open picture attachments on my new 9360 Curve
Help Please! Older guy here is not able to open picture attachments in email - missing grandchildren pictures!!!