Captions in book don't print
I'm using iPhoto 5.04 to build my first book. It's complete and includes a total of 62 pages, plus the cover and title pages. I have a number of pages that use a 2 picture layout with a caption at the bottom of the page. When I print pages to proof read the book, none of these captions print, just for this particular layout, after page 46. Has anyone else seen this and if so, do you know if there is any way around it. Short of a work around, how can I find out if iPhoto 6 has the same problem.
Thanks,
Keith
iMac G5 Mac OS X (10.3.9) iPhoto 5.04
Old Toad:
Thanks for the response. I found the post on the preferences file yesterday and looked at it. I had never made changes before and all the settings were at their defaults. In particular, I looked at the DPI settings. The book DPI settings are 150, 150, and 300 in order (TargetImage, TargetMediumImage, and TargetSmallImage). I changed the small setting to 150 but it had no affect. PrintingImageDPI is at 720 and I haven't changed that. Should I reduce it to see if it matters?
After receiving your post this morning, I deleted the preference file and the two cache folders. It didn't have any affect. I've also repaired the disk permissions on my system and retried everything above with no change in results.
A couple of other questions before I go any further. Are there any parameters in the preferences file that specifically relate to printed text? Do you know what the chances are that this is fixed in iPhoto 6?
Thanks for your efforts. I appreciate your help.
Keith
iMac G5 Mac OS X (10.3.9)
iMac G5 Mac OS X (10.3.9)
Similar Messages
-
Fonts don't print with Font Book
Hi,
Fonts I load in Font Book are looking fine on screen but they don't print - I have to put them directly in the Fonts folder (in the System folder) to do so. My printer is a Lexmark E120n is that matters.
What should I do to get them to print using Font Book?
Thanks for your help!It turns out the problem was with that certain printer. The floor model and other models and makes works fine. the Brother support person was an idiot, and would not think outside the box. Luckily the guys at Apple and Office Depot did.
-
With Leopard, iPhoto6 will no longer print captions in books
Now that I've upgraded to Leopard, iPhoto6 (6.0.6) will no longer print the captions in books when I send them to my desktop printer (Epson Stylus Photo R300). It does print the titles on the front covers. For calendars, it'll print the lines but not the dates. Is there anything I can do to fix this?
Try repairing permissions, try the latest security update, try recreating your drivers from scratch using the latest drivers on Xerox's website, try using open source drivers*, or recovering your old copy of the previous operating system from your backup and disabling Java.
-
On the JTextPane need to don't print special character .........
Hello All,
I work on JTextPane , and want to don't print special character when the user press on this the JTextPane ,like "a" character,
the application will test is this character is "a" or "A" , it won't print the character , else print it , So how can i do that code.??
Thanks.There are other ways, but the best is probably to use a documentFilter.
The Java Tutorials: [Implementing a Document Filter|http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html#filter]
luck, db -
I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..
in the iPhoto preferences change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
LN -
Exporting a PDF so that non-printing objects show but don't print?
I've just spent a couple hours trying to find an answer to this in the forums, but can't. (The most frustrating was one thread where the original poster said, "I found the answer here," and gave a link that went right back to the main page of the forum. Argh.)
Okay, anyway ... what I need to do?
I've got a document with graphics that I want to show up on the pdf when I export it, but that--if a reader prints it--don't print.
The document looks like a 3-ring binder with "tabs" for each section--just like the real thing. But the rings and tabs go right up to the edge and look terrible when printed, and whose printer can print right at the edge of the paper, anyway? But the tabs work as navigational links while looking a the pdf, and the rings just make it look cool, so I WANT them in the pdf.
I've tried:
Turning the entire layer into a non-printing layer (one that "shows" but does not "print"). But when I export it to a pdf, it doesn't show up on the pdf to look at OR to print. So that doesn't work.
Using the Attribute option to turn each object into a non-printing object, but so far as I can tell, that doesn't do a thing, because they still print from the pdf.
Exporting with the "create pdf layers" turned on and off. Exporting with the "include non-printing items" turned on and off.
Basically, I've pretty much tried everything. I gather, from browsing the forums, that this is POSSIBLE, but can't for the life of me figure out what to do to make it happen. (Short of hiding the tabs' layer and creating an entirely separate PDF and calling it "Print version" which is not exactly what I want to do!)
Is there maybe some magical combination of ons and offs I need to select to make this whole thing work?
(And, seriously, am I the only person who thinks the supporting documentation is just dreadful? I can't find anything in any of the Help screens that even mentions this, much less explains how to do it.)
Any help is appreciated!!
--DebPartial progress...
The button option (and, I'm using CS3, by the way--I should have said that originally) does work in terms of showing on the pdf but not printing.
The problem is that it messes up the way the document looks.
I said it's designed to look like a 3-ring binder with tab-dividers between each section, and each tab has a hyperlink to take you to that section.
Now, when you've got a paper binder in front of you, the tabs stay in the same sequence, and often overlap a bit (which mine do). The problem I'm having, having turned all of them into buttons, is that when you click on any of them, it "jumps" to the front of the row, so that they don't "flow" in the correct sequence.
Am I explaining this well? You know, the top-most tab is at the top of the pile, the next one is always below it and above the third one, and so on ... you never see the second tab on TOP of the first one. I'm trying to get the document to act as close to a hard-copy binder as I can, and it did ... except the buttons keep jostling each other for attention...
I'm going to go play around with this some more now, but ... any suggestions? (Other than restructuring my tabs so that they don't overlap at all?) -
Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John LeeLooking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page. -
I am having an issue with Address Book showing menu File > Print. When I select Print, nothing happens, no print dialog box appears. It seems to ignore the print command key command as well. Then at times it is showing Print as grayed out - and it is not even selectable.
Any ideas on this?quit Address book and delete the file homedirectory/library/application support/address book/AddressBook-v22.abcddb. then start Address Book and try printing again.
-
My document don't print the same color when I print it from PDF rather than InDesign
I have a vector image that don't print the same color when I export it to PDF but the colors are the same on the screen.
How can I be sure to have the same colors as my InDesign original document when I print it as a PDF ?I use the default settings for High Quality Print
-
Typed words in pdf doc don't print
I have a paper copy of a form that needed to be filled out so
I scanned the document to a pdf file, typed in the file (I have
adobe writer) and when I printed it, the typed words don't print.
Does anybody know why that would happen? I entered the words by
using "FreeTextTool" just like I always do. Thanks in
advance.Hi PaulaFord,
Thank you for your post. You should know that these forums
are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Please visit the following Acrobat forums for any questions
related to the Acrobat family of desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Cheers,
Pete -
Some Adobe PDF documents don't print from Adobe Reader; with other software it works correctly
Dear community,
I'm facing the problem that some Adobe PDF documents with lots of colors and lines (size less than 3 MB) don't print on our printers from Adobe Reader XI.
The same files when opened with PDF XChange or PDF Architect are printed out without problems.
How can I provide an Adobe Reader that is able to do so? Any recommendations about solving the issue are very appreciated.
Best regards
ChristianWord document problem fixed at the moment by deleting and adding the Lexmark printer again.
-
Office 2010 Don't print blank lines when data fields are empty
How do you do this in office 2010? Where do we go now?
This used to be under the Tools menu in previous versions:
On the Tools menu, click Mail Merge.
In the Mail Merge Helper dialog box, click Merge.
NOTE: You must select the main document and data source for the merge before doing step 2.
In the Merge dialog box, under When Merging Records, click either:
Don't print blank lines when data fields are empty.
-or-
Print blank lines when data fields are empty.
Click Close in the Merge dialog box, and then click
Close in the Mail Merge Helper.
NOTE: If you made no changes in the Merge dialog box, the
Close button is not available. Click Cancel instead.
Back to the topHi,
In Word 2007 or Word 2010, you can add
Mail Merge Helper to the Quick Access bar, and perform the steps then.
To add the
Mail Merge Helper command in the Quick Access Toolbar in Word 2007, follow these steps:
a.
In Word 2007, click the
Microsoft Office Button, and then click Word Options >
Customize.
In Word 2010, click File > Options > Customize Ribbon.
b.
Click
All Commands in the Choose commands from, and then click
Mail Merger Helper in the Choose commands from list.
c.
Click
Add, and then OK.
Best Regards,
Sally Tang -
Don't print files which came from remote server software
I have HP LaserJet Pro M1132 and in local network it works fine but if i try to print files over remote desktop connection via terminal services easy print it send files to printer Que but don't print them.
please helpHow do I delete them?
These:
/Library/Frameworks/GenieoExtra.Framework
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist -
iPhone 5 & iPad 3 library & individual books don't synch properly . Problem began when changed from iphone4s to 5. Help!
Hi Ryguy2303,
As far as I understand, syncing photos TO an iPhone and FROM iPhoto on your MBP is determined purely on your sync settings for your iPhone in iTunes.
Step by Step...?
Here is a screenshot of the sync settings for my iPad 2 in iTunes... Note at the top of the page that I have selected to "Sync Photos from iPhoto". My iPad 2 only has 16GB memory, so I have to be selective with the number of photos I copy across, and choose to sync "Selected albums, Events, and Faces, and automatically include Events from the last 3 months" in the dropdown option box.
It is important to note here that iTunes provides many different combinations of syncing photos to your iPhone.
If you want all your photos in iPhoto on your MBP to be copied to your iPhone, it is as simple as clicking the option circle for "All photos, albums, Events, and Faces". Once you have selected this option, click the "Apply" button in the bottom right corner of iTunes and a sync with your iPhone should commence. Sit back, grab a drink and relax, cause if you have a lot of photos this will take some time, even with the lightening cable connection.
If you want selected photos, then play around with the options... you cannot do any damage here... you are simply asking iTunes to manage to process of copying photos from a location on your MBP (shown as iPhoto in my screenshot above) to your iPhone. No photos are harmed in this process.
If I have missed the point completely, please let me know. -
Address Book Won't Print to file or printer or PDF
Greetings -
Using 10.4.8 on MacBook Pro 17" - Address Book will not print to the printer or to a PDF file when I attempt to print ALL of the addresses. It works for just 1 address. I didn't try 50, 60, etc. to see where it stops. I have about 750 names/contacts.
Archived here is the same question, but with no answers given.
Help!
DavidI have giving up on syncing contacts. In my iMac Address Book, everything is correctly entered and formatted to suit the country where the contact lives.But MobileMe appers to allow you to select only the US, France, Germany and Japan, I think. Other countries seem to default to a US format. Despite the opening of yet another Apple Shop in the UK—in Covent Garden—MobileMe apparently can't recognize a UK address. What seems to happen when I try to sync addresses is that MobileMe thinks it has found different address entries on my coputers, and tries to replace what are correct formats with incorrect ones.
I have just been right through my iMac Address Book, and the MobileMe contact list, and made sure that the data was entered in the same order. The only difference in the two lists was that the Address Book had address data correctly formatted for country in which the contact lives. Yet when asking for the Address Book to sync with MobileMe, the system says it wants to add 109 new contacts and delete a handful of others. These 109 addresses would either be duplicates of existing contacts, or replacements with the address formatting pushed into a US format.
There has been another problem. Some time ago I found that the MobileMe contact list was full of duplicates in which the same data was displayed twice in a different order or a different format.
Unless I am missing something, it seems that syncing using MobileMe, with its lack of address formatting options, is useless for anyone living outside the US, France, Germany or Japan, and useless for them if they happen to have any foreign friends.
Apple seems unconcerned about this. Surely they must have realized that syncing contacts wouldn't work for many, perhaps most, users, yet they continue to promote it as a simple and effective option.
Or am I missing something?
Maybe you are looking for
-
Photos doesn't save to camera roll.
I have the new ipad 3 just updated to iOS 6 and when i try to save a photo from facebook, emails, or safari it doesn't want to save to my camera roll. How can i fix this problem ?
-
What can I do to make a website realize that I'm using the most up-to-date version of Firefox. Flickr, from Yahoo, keeps trying to get me to "upgrade my browser" to something newer when I'm using my preferred browser (Firefox) and I have the latest v
-
How to get no of rows in xslt table in javascript function
Hi , I have an XSLTtable and I want to access the no of rows in java script function. Please help me in this issue. Thanks in advance, Raj.
-
3560G and 802.1X with Cisco IP Phone
Hi, We have been doing some test on our 3560G switch with 802.1X. The switch port has a Cisco IP Phone 7940 connected and at the back of the IP Phone is the PC (802.1X client). The PC authenticates with the computer name or the username properly with
-
8i for NT installation problems
I've just installed Oracle for the first time. I'm a newbie. When I create database using the configuation assistant I get the following error: ORA-00101:invalid specification for system parameter MTS_DISPATCHERS Then I hit Ignore and I get the follo