Capture error messages from CLASS cx_document_bcs
Hi ,
I am using the class CL_BSC for sending mail with attachment,i need to disply the messge captured in the cx_document_bcs in spool log.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Test*
i_attachment_subject = i_attachment_subject1
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
How to disply the messges in Spool,which are captured in the cx_document_bcs.
Please advise.
Thanks
Kiran
Hi Kiran,
Catch exceptions like this.
TRY.
CATCH cx_document_bcs INTO lx_document_bcs.
MESSAGE Ennn(ZXX).
CLEANUP.
ENDTRY.
There you can check diffrent exceptions like this.. from class CX_DOCUMENT_BCS..
ERROR_TYPE parameter of lx_document_bcs contains the below values.. or you can use message parameters. Check constructore parameters in that class.
OBJECT_NOT_EXISTS
KPRO_ERROR
MIME_NOT_AVAILABLE
Based on the code you can give meaning ful message.
Similar Messages
-
How to capture error message from standard function module
Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
VijayaHello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP -
Capture error messages from stored procedure calls
Hi there,
How do I capture a stored procedure calls error messages provided the stored procedures does not have output parameters? This questions applies to Oracle 7.3.4 stored procedures calls.
TQ
NeoThere are two parts.
The stored proc must 'throw' an exception.
And java must catch it.
You probably already have the java part. That is the catch(SQLException).
As for the stored proc you can use the following search string in the jdbc forum
raise oracle
You need to use 'raise' in the stored proc but I am not sure of the exact form, but one of the threads using the above search string is likely to have it. -
Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter
We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide -
Capturing Runtime Error Messages From ODI (Sunopsis) Operator
Hi
I have following question
1) I want to capture error message of an activity that has failed during execution
I have created a variable and used following query to capture it
select T.TXT
from <%=odiRef.getObjectName("L","SNP_EXP_TXT","D")%> T,
<%=odiRef.getObjectName("L","SNP_STEP_LOG","D")%> S
where S.SESS_NO = <%=odiRef.getSession("SESS_NO")%>
and S.I_TXT_STEP_MESS = T.I_TXT
order by T.TXT_ORD asc
unfortunatly am not getting entire error message ,instead am getting first row of the error from SNP_EXP_TXT table.How to get entire error message in a variable.
2) How can we know scenario name if we know session number?
Please provide your inputs
Thanks
BajiHi,
Don't use this query, it won't work.
Use the API GetPrevStepLog, it is simple and better...
Take a look at:
Use the http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/documentation/oracledi_api_reference.pdf
For the session name, just use getSession() Method ( too is at the pdf)
I hope be helpful.
Cezar
Edited by: Cezar Santos on 21/11/2008 09:16 -
Error message from Internet Explorer v8.0.6
My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.
Hi Artby,
In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
Hope that helps,
Andrew -
Error Message from VM TMS 13.0
Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben LaiThis seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142 -
Error message from Application Server
Hi All,
Is it possible to capture a descriptive error message from the Application server when we try to transfer a file from SAP and it does not get written to the application server.
I know it is possible to catch the standard catchable runtime exceptions, but I also would like to know if the file transfer fails in any other conditions which do not result in runtime dumps, nevertheless I should be able to get the error message.
Thanks in advance,hi,
it is not possible to find the run time errors in application server while writing the file.using sy-subrc only we can find out. where it is writing correctly like this.
we can see all the application server files in this Tcode: AL11 -
Facing problem while capturing error messages in ME51N
Hi Experts,
In ME51N transaction, we have included custom fields and tried to capture Error messages by building ex_message.
Below is the code that we used:
loop at tb_error into wa_error.
wa_message-type = WA_ERROR-TYPE.
wa_message-id = c_zpr.
wa_message-number = '007'.
wa_message-message = wa_error-message.
wa_message-message_v1 = WA_ERROR-MESSAGE.
wa_message-message_v2 = wa_eban1-bnfpo.
APPEND WA_MESSAGE TO EX_MESSAGES.
CLEAR WA_ERROR.
endloop.
In my message class we have not hardcoded the messages because we need to capture dynamic messages(In message class it is 007: & & ). For that we have passed message text in wa_message-message.
But when Check button is selected, we are not the desired error message.
But if we pass the same message in Message_v1, we are getting the error message but it is getting truncated as the size is small when compared to Message field.
Waiting for your response.
Thanks & Regards,
AmarnathLooks like configuration prob.
Have you tried jms examples of weblogic ? you may need to re-configure your server setup, to create example server. -
Is it possible to send error message from Adapter Module to CCMS?
Hi
Is it possible to send error message from Adapter Module to CCMS...?I have written on adatper module from there i have to send error message to CCMS or SXMB_MONI. Is it possible if yes please send me the related documents
Best Regards
Ravi Shankar BHi
I have written following User Defined Exeption in my Module program
class DuplicateFileException extends ModuleException{
DuplicateFileException(String message){
super(message);
I am throwing my Exception like this
try{
throw new DuplicateFileException("Duplicate File");
}catch(DuplicateFileException e){
throw e;
But i am not getting this exception in SXMB_MONI. In adpater monitoring i am getting the following exceptions
<b>
2007-05-16 15:51:30 GMT+05:30: Retry interval started. Length: 5.000 s
- 2007-05-16 15:51:30 GMT+05:30: Error: java.lang.NullPointerException
- 2007-05-16 15:51:30 GMT+05:30: An unknown error occured.
- 2007-05-16 15:51:30 GMT+05:30: Processing started
- 2007-05-16 15:51:25 GMT+05:30: Error: java.lang.NullPointerException</b>
can any one give me the idea how to send error from module program to SXMB_MONI
Thanks & Regards
Ravi Shankar B -
How ro send error message from BADI to BAPI
i have a BADI which is triggered from a BAPI.This BADI has only importing and changing parameters.How can i send error message to BAPI.Please reply at the earliest.
High points can be expected.Hi Arshi,
Please check whether the following link is of any use to you,
how to capture the error message from bapi
Best Regards.
Reward points if it is helpful. -
When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?
It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun -
Error message from source system
Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
APHi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar
Maybe you are looking for
-
Print Utility can't find HP printer on home router
I have a MacBook (OS X 10.4.11) connected through AirPort to a Linksys WRT54G Router. Internet connection is fine. I have a HP Deskjet 6127 connected trough TCP/IP to the same Router. I tried for several hours to connect to the printer using the Prin
-
Lenovo Thinkpad T60 - 1952 Screen problems
Hello! I have Thinkpad T60 and i have a little problem: Sometimes my screen blinks and turns blue or pink or black. And when i press the "FN+F7" the T60 screen get output to both LCD and External display even tho there is no display plug in! and the
-
Genetic Algorithm help please!!!!
Hi people, i really need help badly with a project im doing as im not very good at programming yet, The project is as follows Project Allocation This project will develop a Genetic Algorithm that will evolve project allocations, with the aim of maxim
-
Hi All, I am newbie to Oracle Argus. I would like to become Oracle Argus developer. Argus was not installed in my computer to get the comlete informationa bout Argus. Can any one please share the links for Complete reference for Oracle Argus. Thanks,
-
One feedback, and one question.
This is sunny again! Thanks for all your help and I am now able to build a OOK tranceiver. I am now moving toward to cascade the 5610 upconverter and 5600 downconverter to 5640. I just have one feedback for your Burst OOK demodulator IP. I modified i