Capture Form error CDD-23572 when capturing BOTH design and app logic

Hi,
I have a problem when I run the "Capture Form Design" tool in Designer. When I select the capture mode "Capture BOTH module design and application logic", the designer crashes and displays the following error:
"CDD-23572: The connection to Oracle has been lost. Unsaved changes will be lost."
The only thing my form contain is a component created by the "Data Block Wizard" that gets data from a simple table, and layout created by the "Layout Wizard" that is connected to the data block.
The form I try to capture is created in Oracle Form Builder release 10.1.2.0.2.
Oracle Designer version: 10.1.2.0.2.
PS: When i run the capture in the capture mode "Capture ONLY module design", it works perfectly fine.
Does anyone out there have a workaround/ hint to what I'm doing wrong? :)

It seemed like the problem lied in the database version i was running, 10.1. When I installed 10.2 instead, Designer didn't crash.

Similar Messages

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore

Installing the latest update on my iPad - error message saying the iPad couldn't synchronize because of an internal error, and then - error message (OxE8004017) when trying to save, and then (2003) when trying to restore - nothing works anymore - On my iPad the only thing I see is a connector cord to iTunes and nothing else.
What can I do ???

Same issue for me, recently I started having issues with apps no longer being able to access my Facebook account. But the iPad Facebook account settings will not accept my password, even though the Facebook app and Safari can access my account fine. The only significant events I recall that have occurred that may have triggered this have been that via my Facebook account I killed off a lot of so called authorised connections and I changed my user name, but still have the same email address and password.
I have tried just about every solution put forward on the net, short of a factory restore, back to new, on my iPad.
I have also; deleted my iCloud account, deleted the Facebook app and account, deleted Safari data.
One would think that after I have deleted my account from the iPad that it would ask for both username/email address and password, but it only asks for password, so the username is still stored somewhere that I am unable to delete.
I also see that no one seems to have been able to get an answer from Apple. So I'm guessing they have absolutely no idea themselves.
I am hesitant to put my username on Facebook back to what it was as Facebook only give you a few chances to change your username, then you are locked.
I have iOS 7.1.1 installed.
I did have a lot of respect for Apple and their devices as they just worked, but they are becoming tarnished by ignoring what seems to be a growing issue.

I have iTunes open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice.

I have iTunes, latest version, open in Windows XP and get an error 45048 message when I try to update apps thru the store. How can I fix this? I have reinstalled iTunes twice but problem continues.

Try contacting iTunes via email to check if there is an issue with the account. go to apple.com/support/itunes
Click on iTunes Store account and billing and select inquiries. On the right side click on "email us".
Before doing that trying viewing your account information first. Open the iTunes on you mac, look at the menu and select store and select view my account. Try removing the card (this is only applicable if you don't have a pending charges with iTunes) and hit done. Sign out, quit iTunes and sign back in and try updating the apps again.

I get error code -8058 when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder

I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?

Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>

Error 16 on Launch of both CS6 and Arcobat XI

Getting Error 16 on Launch of both CS6 and Arcobat XI. I have checked and corrected permissions on both "SLStore" and "Adobe PCD" and still getting Error 16 on Launch.

Systerm info? Other details? Have you simply tried to reinstall?
Mylenium

Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

Disasble the computer's security software during the download and update.

Error message 1004 when i try tp update apps

i get error message 1004 when i try to update apps on my ipad

This actually has a very simple fix, that has worked all the times I have seen it. Simple goto Settings > Safari > Then reset the cookies, Reset the Cache, and Reset the History. Now turn the iPad off and then on again. It should work fine now.
David

When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching. Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod too. Can I move these back?

When transferring music library and apps to my new I Pad I think I clicked Export Library instead of synching. Now my music library is virtually empty - mostly CDs downloaded, a few apps for the I Pad and apps for the I pod touch too. Can I move these back?

weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
how weird is that?
oh well JG - maybe you mixed a magic potion for me?
anyway, thank you for all the help.
to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
cheers
P

Boston Globe preview in both newsstand and app store is frozen. How do I get out of it?

Am new user. Went into Newsstand to look at Boston Globe App. It froze in both Newsstand and App Store. Cannot release it to get back to main page. Help

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Cant access both iTunes and App Store with new iPad after iOS 6 update. Help, anyone?

I cant seem to access both iTunes and App Store. Tried rebooting, changing dates ahead by months, etc. no success. Anyone?

hi, before reboot of router and iPad, i tried downloading an app in iTunes via PC and synced it to the device. that worked. has it still anything to do with servers?
then i reboot the router and iPad, tried lauching App Store, still no success.

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

An error message appears when i open itunes and itunes closes. wat to do??

when i try to open itunes, the error message "Itunes has encountered a problem and needs to close" pops up and it doesn't show up on the screen. what sould i do to get itunes to work?

Okay ... that rules out a bunch of possibilities.
We could be looking at a damaged CoreFP.dll here. In that case, we might be able to get things working again by swapping out the dll. We'll take a few additional explicit precautions, just in case. probably best to print out a copy of these instructions, because at one point in proceedings you won't be able to use a web browser.
Download and save a fresh copy of the iTunes installer to your hard drive. (Don't run the install on line, and don't start the installation just yet.)
http://www.apple.com/itunes/download/
Now head into your Add or Remove programs control panel. Uninstall iTunes.
Next, we'll remove leftover program files and folders.
In "My Computer", open Local Disk C: or whichever drive your program files are installed on.
Open the "Program files" folder.
Right-click on the "iTunes" folder (if it still existts) and select "Delete".
Open the "Common Files" folder.
Open the "Apple" folder.
Right-click on the "CoreFP" folder (if it still exists) and select "Delete".
Empty your Recycle Bin and restart the PC.
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start an iTunes install by doubleclicking on the iTunesSetup.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Does the iTunes reinstall go through okay? If so, does your iTunes start launching properly again?

Music volume keeps dropping on my iPhone 6 when using both headphones and AirPlay

when playing music on my iPhone 6, sometimes the volume will drop for reason at all. Fortunately it doesn't happen too often, but when I'm driving and it dones happen, I can bearly hear it. It corrects itself completely at random too. Please help, it's an annoying problem.

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Configuration Error 16 on Creative Suite 6 Design and Web Premium

Hello,
I recently began receiving a Configuration Error 16 message when I attempt to launch any of the CS6 applications.
I attempted to follow the instructions here:
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
However, when I attempted to go to the SLStore and Adobe PCD folders in Finder, I discovered that neither folder actually exists. (I'm guessing this may be a key cause of the problem.)
I am wary of uninstalling and reinstalling, simply because I was provided a free download of CS6 Design and Web Premium by the University of California, Berkeley, which I attend. I can produce my software license number upon request.
Simply, how do I go about fixing this problem? If a full uninstall and reinstall are the solution, will I be able to do so freely?
I am using Mac OS 10.8.4
Thank you very much,
Chad

Have a look here, looks like it may be a permissions issue:
http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

Install error for Acrobat portion of CS6 Design and Web.

Doing a fresh install of CS6 Design and Web, on a new iMac running 10.8.5, I get the following error.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Acrobat X Pro : Install failed

Hi ebreden,
Please refer the kb: http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html.
Exit Code 6: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Regards,
Romit Sinha

Capture Form error CDD-23572 when capturing BOTH design and app logic

Similar Messages

Maybe you are looking for