Capture Microsoft SQL Server - does nothing?

Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE     11.1.0.7.0     Production
TNS for 64-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Oracle SQL Developer 2.1.9.63 - moved to this latest version as had the same issue with 1.5.5.
SQL SERVER 2008
===
I am trying to migrate my SQL SERVER database to Oracle.
Am following the steps from here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
Problem is that when I right click on my SQLSERVER connection and do Capture nothing happens - no progress dialog (what should happen), no error message, nothing.
I think 1.5.5 had a problem with SQLSERVER 2008 but 2.1.9 ?.
Any help would be much appreciated.
regards,
Andy

Hi,
SQL DEVELOPER does not support SQL SERVER 2008.
This is due to the sourceforge JDBC driver which is limited until SQL SERVER 2005 version.
See this webpage:
http://www.oracle.com/technology/products/database/sql_developer/files/supportedmigplatforms.html
Regards,
Mireille

Similar Messages

  • Errors while migrating from Microsoft SQL Server 2005 to Oracle 9i

    Hi All,
    We are trying to completely move our application from Microsoft SQL Server 2005 Database to Oracle 9i. I am doing it using the latest version of Oracle SQL Developer (1.2 build 29.98).
    When I right click my MSSQL server db and click "Capture Microsoft SQL server", it just shows a dialog with "Close" enabled.
    Kindly help.
    The migration Log has the following messages:
    oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
    oracle.dbtools.metadata.persistence.PersistenceException: Unsupported feature
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    Error ocurred during capture: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Protocol violation
    oracle.dbtools.metadata.persistence.PersistenceException: OALL8 is in an inconsistent state
    oracle.dbtools.metadata.persistence.PersistenceException: Bigger type length than Maximum
    I cant figure out what do these messages mean.
    Regards,
    Sandeep

    Pasting the errors on logging page, if this is of any help:
    SEVERE     150     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     151     1485     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     152     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     153     10954     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     154     15     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     155     2688     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     156     1140     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     158     62172     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     160     3672     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation
    SEVERE     161     63     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:OALL8 is in an inconsistent state
    SEVERE     162     0     oracle.dbtools.raptor.utils.NLSUtils     Error loading nls:Protocol violation

  • [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]

    Hii ..
    need help on this ..
    This what I am doing ..
    I am using a DATAEXPORT function to export level0 data from my essbase 11.1.2.2 to Microsoft SQL 2008 tables.
    So what I did first I exported the level0 data to a flat file using DATAEXPORT and the created the SQL columns by the same  in that order only in my SQL table.
    When I run it fails with this error:
    ODBC Layer Error: [21S01] ==> [[DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Column name or number of supplied values does not match table definition.]
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021014)
    ODBC Layer Error: Native Error code [213]
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Error(1012085)
    Unable to export data to SQL table [dataexp]. Check the Essbase server log and the system console to determine the cause of the problem.
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1021002)
    SQL Connection is Freed
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Warning(1080014)
    Transaction [ 0x1c50001( 0x51ee7d66.0x80342 ) ] aborted due to status [1012085].
    [Tue Jul 23 18:26:07 2013]Local/dataexp/dataexp/admin@Native Directory/1209813312/Info(1012579)
    Total Calc Elapsed Time for [test.csc] : [1.44] seconds
    =============================================================
    I did a simple test on my Sample.basic application then ..
    loaded the calc data to it and then used the below script to export to a flat file
    //ESS_LOCALE English_UnitedStates.Latin1@Binary
    SET DATAEXPORTOPTIONS
                    DataExportLevel "Level0";
                    DataExportOverwriteFile ON;
                    DataExportColFormat OFF;
                    DataExportDimHeader OFF;
    FIX(
                "Jan",
                "Sales",
                "Actual"
    /*DATAEXPORT "File" "," "/home/hypadmin/samtest.txt";*/
    DATAEXPORT "DSN" "Abhitest" "sample" "sa" "welcome1";
    ENDFIX
    out put as below:
    "Sales"
    "100-30","California"
    "Jan","Actual",145
    Now In sql I created only 3 columns with name Jan/Sales/Actual and when I run this script again with comments removed .. I get the same error as what I have got in my first test case with other application ..
    but when I create the columns with same name as what its in export
    Sales/100-30/Califirnia/Jan/Actual
    It created the new rows successfully ..
    So with this I think the error which I am getting with my other application might be because of the same column issue  .. but then I have created all the columns by looking at the export file only as I did in sample ..
    Any idea would be helpful ..
    Thanks
    Abhishek
    I

    First make sure you add
    DataExportRelationalFile ON;
    to your set commands it is missing
    I alwats like to also add
    DataExportColHeader dimensionName;
    so I am sure what dimension is getting put into the columns.
    Then count the number of dimensions in your outline (exclude attribute dimensions). You need at least that many columns in your table  -1 + the number of  members you will be returning as columns in the export
    Taking your example Sample basic has 5 dimensions
    Measures
    Years
    Scenario
    Product
    Market
    Since you did not specify a dataexportcolheader it took the dense dimension Scenario as the columns. Your fix statement is limiting that to one member. Doing the math
    5 -1 + 1 = 5 columns in your table which is what you found works.  Suppose you fixed on bothe Actual and budget in scenario then you would need 6 columns 5 -1 +2

  • Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

    Help,
    setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine.  When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
    i get the following error:
    Connection failed:
    SQLState:'01000'
    SQL Server Error:67
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
    (Connect()).
    Connection failed:
    SQLState:'08001'
    SQL Server Error:17
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
    I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled.  I can connect to the other sql server in studio manager on the new machine however, i can't go do
    the same in the old server, says:
    cannot connect to hbfsqlpro1\hbfsqlpro1
    Additonal information a network related or instance specifc error occured while establising a connection to SQL server.  The server was not found or was not accessible.  Verify that the instance name is correct and that SQL server is configured to
    allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
    the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine.  STarting to pull my hair out somewhat, i'm sure it's something really simple! 

    Hello,
    You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
    Make sure TCP/IP is enabled.
    http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
    Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
    Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

    Hi, I've seen questions about this error posted elsewhere but I'm not sure if the same issues applied.
    I'm trying to connect to SQL Server from a VBA macro in excel. I've managed to do this with the code below where my query is return to cells in my active worksheet but for another query I want to run the data to be return is too large for Excel to handle
    and so I'd like to save it as a .csv file but using the second example of my code I get the message "[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied". Since I have access to this database from the first example
    of the code, I assume my conn.ConnectionString line of code is letting me down.
    Can anyone help me please?
    'Code to return data to worksheet'
    Sub macro2()
    With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array(Array( _
            "ODBC;DSN=SQLRA - OPENBET;UID=user1;Trusted_Connection=Yes;APP=Microsoft Office 2013;WSID=pdfdf3001;DATABASE=open;Network=DBMSS" _
            ), Array("OCN;Address=SQLRA_DB,55455;ApplicationIntent=READONLY;")), _
            Destination:=Range("$BG$1")).QueryTable
            .CommandText = Array( _
            "select  A.ev_oc_id, B.ev_mkt_id, A.ev_id, D.start_Time, Upper(Replace(A.[desc],'|','')) , A.result, COALESCE(A.sp_num, A.lp_num) , ", _
            "COALESCE(A.sp_Den, A.lp_Den) from open.reporting.tevoc A, open.reporting.tevmkt B, open.reporting.tevocgrp C, open.reporting.tev D ", _
            "where  A.ev_mkt_id = B.ev_mkt_id and B.ev_oc_grp_id = C.ev_oc_grp_id and D.ev_id = A.ev_id and Upper(Replace(D.[desc],'|','')) = 'home' and upper(B.name) = '|today|' and D.ev_type_id in (264, 289) and D.ev_class_id = 49
    and D.start>= '" & Year & "-" & Month & "-" & Day & "'" _
            .RowNumbers = False
            .FillAdjacentFormulas = False
            .PreserveFormatting = True
            .RefreshOnFileOpen = True
            .BackgroundQuery = True
            .RefreshStyle = xlInsertDeleteCells
            .SavePassword = False
            .SaveData = True
            .AdjustColumnWidth = True
            .RefreshPeriod = 0
            .PreserveColumnInfo = True
            .ListObject.DisplayName = "Table_Query_from_SQLRA___OPEN_1"
            .Refresh BackgroundQuery:=False
        End With
    End Sub
    'Code that produces error'
    Sub macro1()
    Dim conn As ADODB.Connection
    Set conn = New ADODB.Connection
    Dim testSQL As String
    Dim qd As DAO.QueryDef
    Dim openbetdb As Database
        conn.ConnectionString = "driver={SQL Server}; server= sqlra_db;uid=user1;APP=Microsoft Office 2013;WSID=pdfdf3001;database=openbet"
        conn.Open
        testSQL = "SELECT * FROM open.reporting.TevType where ev_class_id = 49 and ev_type_id in(289,330,518,13492);"
        Set qd = Db.CreateQueryDef("tmpExport", testSQL)
        DoCmd.TransferText acExportDelim, , "tmpExport", "C:\\export.csv"
    End Sub

    Hello,
    Are you connect to remote SQL Server? If so,
    please make sure the target SQL Server is running and is listening on appropriate protocols. Please take a look at the following article about general steps to troubleshoot
    SQL connectivity issues:
    http://blogs.msdn.com/b/sql_protocols/archive/2008/04/30/steps-to-troubleshoot-connectivity-issues.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • Does Microsoft SQL Server 2k JDBC Driver SP3 support "trusted connections"?

    I get the following error when attempting to connect to a SQL Server instance via JDBC :-
    [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Login failed for user '<username>'. Reason: Not associated with a trusted SQL Server connection.
    Does Microsoft SQL Server 2000 JDBC SP3 Driver support "trusted connections"?

    No, the MSDE instance I'm trying to connect to from my J2 application is configured as "Integrated Windows Authentication" ONLY (i.e not "mixed mode" and deliberately so) hence my search for a JDBC driver that supports o/s-based authentication.
    I appear to have found one now however at it appears that DataDirect's JDBC driver supports NTLM and Kerberos authenicaiton on Windows (although I haven't got it working yet).
    Thanks for your reply tho'

  • Microsoft SQL Server

    Hello, and thanks for having a look at this question.
    I am developing a dynamic website which will eventually be
    hosted on a customer's intranet. They have informed me that they
    can only provide a Microsoft SQL Server 2005, IIS 6, Microsoft
    Server 2003 (SP2) environment for the data. We are about to install
    our own Test Server to proof our site as it develops prior to
    installing completed content with the client. Now I'm new to all
    this and would be very grateful for any experience which can be
    passed on!
    Two questions immediately spring to mind:
    Does anyone know of any good guidance/information on
    connecting to a Microsoft SQL Server from Dreamweaver CS4? There is
    plenty of support and guidance for using MySQL but almost nothing
    on the Microsoft SQL Server.
    Must we exactly replicate the Client environment or can we
    implement Microsoft SQL Server 2008, IIS 7, Microsoft Server 2008
    on our Test Server and confidently 'install' the website/data in
    the Client environment?
    I assume, and I could be very wrong here, that the database
    connection would be different (not too difficult to change the
    connection for the deployed version) and the PHP code would be
    different for MySql and Microsoft SQL. For this reason I presume we
    should not implement a MySQL solution in our Studio and then try to
    deploy the website into a Microsoft SQL environment.
    Many thanks
    Chris

    Chris Molland wrote:
    > Hello, and thanks for having a look at this question.
    >
    > I am developing a dynamic website which will eventually
    be hosted on a
    > customer's intranet. They have informed me that they can
    only provide a
    > Microsoft SQL Server 2005, IIS 6, Microsoft Server 2003
    (SP2) environment for
    > the data. We are about to install our own Test Server to
    proof our site as it
    > develops prior to installing completed content with the
    client. Now I'm new to
    > all this and would be very grateful for any experience
    which can be passed on!
    >
    > Two questions immediately spring to mind:
    >
    Does anyone know of any good
    guidance/information on connecting to a
    > Microsoft SQL Server from Dreamweaver CS4? There is
    plenty of support and
    > guidance for using MySQL but almost nothing on the
    Microsoft SQL
    > Server.
    Must we exactly replicate the Client
    environment or can
    > we implement Microsoft SQL Server 2008, IIS 7, Microsoft
    Server 2008 on our
    > Test Server and confidently 'install' the website/data
    in the Client
    > environment?
    > I assume, and I could be very wrong here, that the
    database connection would
    > be different (not too difficult to change the connection
    for the deployed
    > version) and the PHP code would be different for MySql
    and Microsoft SQL. For
    > this reason I presume we should not implement a MySQL
    solution in our Studio
    > and then try to deploy the website into a Microsoft SQL
    environment.
    CS4 supports ASP with MSSQL and PHP with MySQL. Whilst ASP
    can work with
    MySQL and PHP can work with MSSQL, there are not any built in
    server
    behaviours in CS4 that will let you do this.
    Using 2003 or 2008 shouldn't matter at all, but using the
    right database
    will matter, and so will using the right language (ASP or
    PHP).
    If you want to use PHP, this needs to be installed on both
    servers, as
    it isn't included by default. ASP is part of IIS, but will
    need to be
    enabled.
    Dooza
    Posting Guidelines
    http://www.adobe.com/support/forums/guidelines.html
    How To Ask Smart Questions
    http://www.catb.org/esr/faqs/smart-questions.html
    How To Report A Bug To Adobe
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Designer10g R2 Design Capture of SQL Server DDL file Failed

    I have been using Designer 10g R2 to design capture Oracle Database Schema into the Server Model Diagram with no problems at all.
    I have a SQL Server 2005 exported DDL file into an ASCII text file. I then import the DDL script into the Server Model Diagram but ERRORs.
    I use SQL Server 2005 to import the DDL script and then create an ODBC to connect to the SQL Server. I can then design capture the SQL Server schema into Designer.
    What has gone wrong? Does Designer 10g R2 support design capture from SQL Server DDL file directly to Designer?
    By the way, if I want to generate MySQL DDL script or design capture MySQL DDL script into Designer, how could this be done as there is no ODBC driver for MySQL?

    Hello,
    Please see the following links:
    http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/df35f9f5-9c52-4ec4-8f5a-03a8dbef4352/
    http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/thread/e8e27857-7bb7-46a2-af9b-25e397b37374/
    http://ask.sqlservercentral.com/questions/3582/sqlbol-cab-is-corrupt-and-cannot-be-used-in-sql-server-2005
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error creating GTC to Microsoft SQL Server 2008

    I have a table in a Microsoft SQL Server 2008 data base.
    When I set the configuration of the connector I get and error.
    com.thortech.xl.gc.exception.DBException: The schema sipec does not exist in the target database.
    In the database performed the following query " select * from sipec.dbo.TABLE" and throws me results. But if I performed the following query “select * from sipec.TABLE” this brings me no results.
    So if in the field “Parent Table/View Name” I put this “sipec.dbo.TABLE” in the log file I see this error
    com.thortech.xl.gc.exception.DBException: The table name must be specified in the form of [Schema].[Table] or [Table]
    I put the driver where the guide indicate

    What is the solution?
    I have the same thing with SQL Server 2008 64 bit. When i switch my datasource from SQL 2008 to SQL 2000 it works great otherwise it will not work. I have checked SQL Server 2008 that all the ports show 1433. I have been stuck on this for a while. I also checked the SQL Server Network Configuration / TCP/IP and i have nothing in the dynamic field and all the ports show 1433. If someone has allready figured this out it would be good to have a solution- Especially since coldfusion is supposed to connect to the database....
    Thanks for any help.

  • Is there a way to convert Crystal Reports to Microsoft SQL Server 2005 reporting services?

    Post Author: Lourdes Hernandez
    CA Forum: General
    Our department has always worked with and we love Crystal Reports. Unfortunately, certain reports now need to be converted to Microsoft SQL Server 2005 reporting services which from what I read I think they are *.rdl reports. Does Crystal reports have any way around this? I would have to learn this other tool when I'm already so happy with Crystal. I was thinking If I could just code the report in crystal and export it in a specific format that would be compatible Microsoft, the problem would be solved.
    Any ideas would be greatly appreciated.

    Post Author: bettername
    CA Forum: General
    Ditto!
    There are some software packages to convert from CR to RS, but none work 100% AFAIK, and will require manual tuning.
    Seems like a big hassle and learning curve just to get reports published via another method - I know I'd put up huge resistance if they tried to take my CR away from me!

  • Microsoft SQL Server 2014 Setup error: Wait on the Database Engine recovery handle failed

    Hi,
    Having this annoying error trying to install SQL Server 2014 (RTM). I saw it's been asked several times... But each post seems a different cause and no definitive answer...
    I'm not doing an upgrade, so no "sa account" issue.
    Tried different media. Even three different distributions: trial, Standard and Enterprise.
    Tried disabling Microsoft antivirus/firewall.
    Of course tried restarting, updating, installing, uninstalling, repairing, etc., etc.
    I noticed the users folders under C:\Users weren't created. (Maybe something related to permissions?) After playing around, I managed for the users to be created and the service started. Though I couldn't log in.

    Summary for last "repair" attempt:
    Overall summary:
    Final result: Failed: see details below
    Exit code (Decimal): -2068578302
    Start time: 2014-04-27 23:54:21
    End time: 2014-04-27 23:59:48
    Requested action: Repair
    Setup completed with required actions for features.
    Troubleshooting information for those features:
    Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
    Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
    Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
    Next step for LocalDB: Use the following information to resolve the error, and then try the setup process again.
    Machine Properties:
    Machine name: CHARLY13C
    Machine processor count: 4
    OS version: Windows 8
    OS service pack:
    OS region: United States
    OS language: English (United States)
    OS architecture: x64
    Process architecture: 64 Bit
    OS clustered: No
    Product features discovered:
    Product Instance Instance ID Feature Language Edition Version Clustered Configured
    SQL Server 2012 DENALI MSSQL11.DENALI Database Engine Services 1033 Enterprise Edition 11.1.3128.0 No Yes
    SQL Server 2012 LocalDB 1033 Express Edition 11.1.3128.0 No Yes
    SQL Server 2014 HEKATON MSSQL12.HEKATON Database Engine Services 1033 Enterprise Edition 12.0.2000.8 No Yes
    SQL Server 2014 HEKATON MSSQL12.HEKATON Full-Text and Semantic Extractions for Search 1033 Enterprise Edition 12.0.2000.8 No Yes
    SQL Server 2014 HEKATON MSSQL12.HEKATON Data Quality Services 1033 Enterprise Edition 12.0.2000.8 No Yes
    SQL Server 2014 Management Tools - Basic 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
    SQL Server 2014 Management Tools - Complete 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
    SQL Server 2014 Client Tools Connectivity 1033 Enterprise Evaluation Edition 12.0.2000.8 No Yes
    SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
    Package properties:
    Description: Microsoft SQL Server 2014
    ProductName: SQL Server 2014
    Type: RTM
    Version: 12
    SPLevel: 0
    Installation location: F:\x64\setup\
    Installation edition: Enterprise
    User Input Settings:
    ACTION: Repair
    AGTDOMAINGROUP: <empty>
    AGTSVCACCOUNT: <empty>
    AGTSVCPASSWORD: <empty>
    AGTSVCSTARTUPTYPE: Manual
    ASCONFIGDIR: Config
    ASSVCACCOUNT: <empty>
    ASSVCPASSWORD: <empty>
    CLTSTARTUPTYPE: 0
    CLTSVCACCOUNT: <empty>
    CLTSVCPASSWORD: <empty>
    CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
    CTLRSTARTUPTYPE: 0
    CTLRSVCACCOUNT: <empty>
    CTLRSVCPASSWORD: <empty>
    ENU: true
    FAILOVERCLUSTERGROUP: <empty>
    FAILOVERCLUSTERNETWORKNAME: <empty>
    FTSVCACCOUNT: NT Service\MSSQLFDLauncher$HEKATON
    FTSVCPASSWORD: <empty>
    HELP: false
    IACCEPTSQLSERVERLICENSETERMS: false
    INDICATEPROGRESS: false
    INSTANCENAME: HEKATON
    ISSVCACCOUNT: NT AUTHORITY\Network Service
    ISSVCPASSWORD: <empty>
    ISSVCSTARTUPTYPE: Automatic
    QUIET: false
    QUIETSIMPLE: false
    SQLSVCACCOUNT: NT Service\MSSQL$HEKATON
    SQLSVCPASSWORD: <empty>
    UIMODE: Normal
    X86: false
    Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\ConfigurationFile.ini
    Detailed results:
    Feature: Management Tools - Complete
    Status: Passed
    Feature: Client Tools Connectivity
    Status: Passed
    Feature: Management Tools - Basic
    Status: Passed
    Feature: Database Engine Services
    Status: Failed: see logs for details
    Reason for failure: An error occurred during the setup process of the feature.
    Next Step: Use the following information to resolve the error, and then try the setup process again.
    Component name: SQL Server Database Engine Services Instance Features
    Component error code: 0x84B40002
    Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
    Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
    Feature: Data Quality Services
    Status: Failed: see logs for details
    Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    Next Step: Use the following information to resolve the error, and then try the setup process again.
    Component name: SQL Server Database Engine Services Instance Features
    Component error code: 0x84B40002
    Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
    Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
    Feature: Full-Text and Semantic Extractions for Search
    Status: Failed: see logs for details
    Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    Next Step: Use the following information to resolve the error, and then try the setup process again.
    Component name: SQL Server Database Engine Services Instance Features
    Component error code: 0x84B40002
    Error description: The SQL Server feature 'SQL_Engine_Core_Inst' is not in a supported state for repair, as it was never successfully configured. Only features from successful installations can be repaired. To continue, remove the specified SQL Server feature.
    Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x2841E06E%401204%402&EvtType=0x2841E06E%401204%402
    Feature: SQL Browser
    Status: Passed
    Feature: SQL Writer
    Status: Passed
    Feature: LocalDB
    Status: Failed: see logs for details
    Reason for failure: An error occurred during the setup process of the feature.
    Next Step: Use the following information to resolve the error, and then try the setup process again.
    Feature: SQL Client Connectivity
    Status: Passed
    Feature: SQL Client Connectivity SDK
    Status: Passed
    Feature: Setup Support Files
    Status: Passed
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140427_235420\SystemConfigurationCheck_Report.htm

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

  • Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi there,
    I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
    Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
    By following the tutorials at
    here I was able to successful create my Data Connection Gateway with a self-signed certificate.
    However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
    Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
    However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
    The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
    Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
    I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
    Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53]. 
    Some considerations
    If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
    Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
    SQL Profiler does not show any attempt of connection.
    The SQL server instance in question is the default one.
    The error happens regardless if I select the option to encrypt connection or not.
    In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
    The Event Viewer does not provide any further errors than the one I have copied in this post.
    I'm at a loss here. Could someone please advise what might I be doing wrong?
    Regards,
    P.

    Here is what I had to do to solve this issue:
    Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
    domain isn't trusted.
    What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

  • How to create a package without BIDS in Microsoft SQL Server Management Studio

    I have inherited some SSIS packages that I found I can edit by opening the .dtsx file in my local copy of Microsoft SQL Server management studio.  I then get Control Flow tab, Data Flow tab etc.  I can add or change or delete any of the control
    or data flows.  I have found that if I use the same path to the local file where the packages are stored that exists on the server, I can edit the dtsx file on my local machine and copy the dtsx file to the server into the same directory structure and
    sucessfully execute the package on the SQL 2008 server.
    I have VS 2010 installed.  I have read that I have to install VS 2008 to use BIDS from within VS.  However, this has not worked out very well.  Since I can basically create a new package by deleteing all of the control and data flows from
    an existing package, I am in pretty good shape.  However, I would just like to know if there is a way to create a new dtsx file from within Microsoft SQL Server management studio.  Also one thing I have not been able to change is the event handler
    name or package exploration name....it is just an annoyance since it does not cause any problems, just would like to be able to rename it.   

    Hi Fred,
    We cannot develop SSIS package in SQL Server Management Studio. If we use SQL Server Import and Export Wizard, we can save it as a package but the package is rather simple.
    We use Business Intelligence Development Studio (BIDS) or SQL Server Data Tools (SSDT) to develop SSIS packages. To develop SSIS 2008 packages, we must use BIDS installed by SQL Server 2008, and the BIDS 2008 can only be integrated with Visual Studio 2008.
    To develop SSIS 2012 packages, we use the SSDT installed by SQL Server 2012 which uses Visual Studio 2010 shell and can only be integrated with Visual Studio 2010.
    Different versions of SSIS package have different package formats/schemas. If you can create SSIS packages project in you Visual Studio 2010, it means that you have installed SSDT already, and the packages you design are SSIS 2012 packages. If you open and
    eidt SSIS 2008 packages in you Visual Studio 2010, the packages will be upgraded to SSIS 2012 package format. SSIS 2012 packages cannot be downgraded to SSIS 2008 packages or deployed to SSIS 2008 server.
    Regards,
    Mike Yin
    TechNet Community Support

  • VMware SQL 2008R2 bcp error - SQLState = 08001, NativeError = 0 Error = [Microsoft][SQL Server Client 10.0] Client unable to establish connection due to prelogin failure

    Can someone help me resolve this error?   Thanks  
    Windows Server 2008 R2  Standard SP1 64-bit -  SQL Server 2008R2 Standard 64-bit 
    VMware vCenter Server Version 5.1.0
    SQLState = 08001, NativeError = 0
    Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
    bcp program: 
    bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
    The bcp program executes successfully on a local instance of SQL Server.

    The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
    It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
    The message you would see would be similar to
    2010-08-18 14:11:30.91 Logon       Error: 17809, Severity: 20, State: 3
    Possibly followed by a a line that details the message. The error number may be different.
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for

  • Tried to download the newest version of itunes (10.4) but it says I don't have APPDATA. HELP?!

    I tried to download the newest version of itunes but then it says that it couldn't since it couldn't locate the APPDATA, I even went to the point of downloading the itunes all over again, but it still hasn't done anything to help. Anyone have any ide

  • HT201364 how do I upgrade to maverick os on a iMac5 model?

    OS X Snow Leopard 10.6.8, the latest version is currently installed.

  • G/L Account not Balance

    Hi, I have a situation where by on of the takeover G/L account is not balanced in FS10N. The inbalance of the G/L account was attributed due to recent A/R conversion where we were migrating from one old customer account to another new customer accoun

  • Iphone cannont be used required sofware not installed

    I finally got ITunes reinstalled on Windows XP after many laborous hours.  Now when I plug in my Iphone 5 I of course get a new message.  THIS IPHONE CANNOT BE USED BECAUSE THE REQUIRED SOFTWARE IS NOT INSTALLED.  RUN THE ITUNES INSATLLER TO REMOVE I

  • Oracle discoverer olap and 11g olap

    Does anyone know if i can use disco plus olap against an 11g database cube. currently with my patch level it definately doesn't work as i cantwven select a catalog to report on but if i add patches will it work? and is it certified? i have read the f