Capture the First Changed Date In actions Infotype In PA30
Hi experts,
I want to find out the date on which the actions record was created. Where can i find this ?.
For ex if i am creating a record on 01.07.2011 with start date 25.06.2011 the change date would be 01.07.2011 in pa0000.
If i change it on 10.07.2011, the change date would be 10.07.2011. I want to capture the date when i actually created it(01.07.2011). I tried the T.code S_AHR_61016380 . But it contains the log of the changes done from the second time.
Can anyone plese help me?
With thanks in advance,
Syed Ibrahim .G
hi prabhu,
thanks for the reply. I tried the function modules and these function modules also return the logs of the data changed .
But i need to get the log of the record when it was created first.
For ex : for actions info type i created a record with start date as 20.09.2011 .When i tried the function module it did not return any values. Then, i changed the record i created for actions info type . now i executed the Fm , now i was getting the log for the data changed and not for created.Can some one throw light on this.
With thanks in advance,
Syed Ibrahim .G
Edited by: SYED_ibbu on Sep 22, 2011 9:51 AM
Similar Messages
-
Capturing the details of data in which error occured during uploading
Hi, anyone tell me how to Capturing the details of data in which error occured during uploading the file using BDC in backgroung mode. Please do the needful
Thanks & Regards.
Aniruddhahi,
This declaration is used to capture the error msg. V is the std table that captures that.i have given a sample code with this..pls chk it out..
data: err type standard table of bdcmsgcoll with header line.
SAmple code:
report z_aru_bdc_new4
no standard page heading line-size 255.
include bdcrecx1.
Generated data section with specific formatting - DO NOT CHANGE ***
parameters: p_file like rlgrap-filename obligatory.
data: err type standard table of bdcmsgcoll with header line.
data: mess(200) type c.
data: begin of it_err occurs 0,
msg(200) type c,
end of it_err.
data: begin of record occurs 0,
data element:
viewname_001(030),
data element: VIM_LTD_NO
ltd_dta_no_002(001),
data element: ZEMPID3
zempid3_003(004),
data element: ZENAME3
zename3_008(040),
data element: ZEDEPID
zedepid_009(004),
data element:
zsalkey_010(005),
data element:
salary_011(013),
data element: ZENAME3
ZENAME3_008(040),
data element: ZEDEPID
ZEDEPID_009(004),
data element:
ZSALKEY_010(005),
data element:
SALARY_011(013),
end of record.
End generated data section ***
start-of-selection.
at selection-screen on value-request for p_file.
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
DEF_PATH = ' '
mask = '.,..'
mode = 'O' " O -- open, S -- Save.
title = 'OPEN'
importing
filename = p_file
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
start-of-selection.
call function 'UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
tables
data_tab = record
exceptions
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
others = 7
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*perform open_dataset using dataset.
*perform open_group.
delete record index 1.
loop at record.
*read dataset dataset into record.
*if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'VIEWNAME'
record-viewname_001.
perform bdc_field using 'VIMDYNFLDS-LTD_DTA_NO'
record-ltd_dta_no_002.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=NEWL'.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-SALARY'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'ZEMPTAB1-ZEMPID3'
record-zempid3_003.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZENAME3'.
perform bdc_field using 'BDC_OKCODE'
'=UEBE'.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_transaction using 'SM30'.
*enddo.
*perform close_group.
*perform close_dataset using dataset.
endloop.
loop at it_err.
write : / it_err-msg.
endloop.
form error.
call function 'FORMAT_MESSAGE'
exporting
id = sy-msgid
lang = '-D'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
importing
msg = mess
exceptions
not_found = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
it_err-msg = mess.
append it_err.
clear it_err.
endform.
If it is session method u can find the session in SM35 from where u can get the error log.
Hope this helps u,
Regards,
Arunsri -
How do I get the last changed date & time of a file in app server?
Hi Experts,
How do I get the last changed date & time of a file in app server?
Thanks!
- Anthony -Hi,
that's what I use...
CALL 'C_DIR_READ_FINISH'. " just to be sure
CALL 'C_DIR_READ_START' ID 'DIR' FIELD p_path.
IF sy-subrc <> 0.
EXIT. "Error
ENDIF.
DO.
CLEAR l_srvfil.
CALL 'C_DIR_READ_NEXT'
ID 'TYPE' FIELD l_srvfil-type
ID 'NAME' FIELD l_srvfil-file
ID 'LEN' FIELD l_srvfil-size
ID 'OWNER' FIELD l_srvfil-owner
ID 'MTIME' FIELD l_mtime
ID 'MODE' FIELD l_srvfil-attri.
* l_srvfil-dir = p_path .
IF sy-subrc = 1.
EXIT.
ENDIF." sy-subrc <> 0.
PERFORM p_to_date_time_tz
USING l_mtime
CHANGING l_srvfil-mod_time
l_srvfil-mod_date.
TRANSLATE l_srvfil-type TO UPPER CASE. "#EC TRANSLANG
PERFORM translate_attribute CHANGING l_srvfil-attri.
CHECK:
NOT l_srvfil-file = '.',
l_srvfil-type = 'D' OR
l_srvfil-type = 'F' .
APPEND l_srvfil TO lt_srvfil.
ENDDO.
CHECK NOT lt_srvfil IS INITIAL.
pt_srvfil = lt_srvfil.
FORM p_to_date_time_tz USING p_ptime TYPE p
CHANGING p_time TYPE syuzeit
p_date TYPE sydatum.
DATA:
l_abaptstamp TYPE timestamp,
l_time TYPE int4,
l_opcode TYPE x VALUE 3,
l_abstamp TYPE abstamp.
l_time = p_ptime.
CALL 'RstrDateConv'
ID 'OPCODE' FIELD l_opcode
ID 'TIMESTAMP' FIELD l_time
ID 'ABAPSTAMP' FIELD l_abstamp.
l_abaptstamp = l_abstamp.
CONVERT TIME STAMP l_abaptstamp TIME ZONE sy-zonlo INTO DATE p_date
TIME p_time.
ENDFORM. " p_to_date_time_tz
Regards,
Clemens -
How to capture the user change in an input field on a selection screen?
I am coding a selection screen in which there are two input fields. The first field takes a Unix directory from the user input. Based on the input value, the second field will be populated with a the name of a file under the corresponding directory.
My question is how I can make the program capture the user input without having to make the user press ENTER after they enter the value in the first field?
Any help will be greatly appreciated.Venkat,
Actually you led me to the real solution! It's the function module DYNP_VALUES_READ that does the trick for me. This function enables the program to capture dynamic user changes without recourse to PAI. Please refer to the code below:
REPORT zreiabsintf MESSAGE-ID zreiabsintfmc.
*<HGDC------------------------------------------------------------------
* Selection screen for the conversion program
*HGDC>------------------------------------------------------------------
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-001.
PARAMETERS: p_indir LIKE epsf-epsdirnam OBLIGATORY, " Inbound file directory
p_infile LIKE epsf-epsfilnam DEFAULT gc_infile OBLIGATORY, " Inbound file name
SELECTION-SCREEN END OF BLOCK input.
*<HGDC------------------------------------------------------------------
* Displays a file-open dialog when the user clicks the search
* help button next to the inbound file text field. The user
* can select the inbound file visually.
*HGDC>------------------------------------------------------------------
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_infile.
* Capture any user change to the directory.
PERFORM check_dir_change.
* Display the file open dialog
PERFORM file_open_dialog CHANGING p_infile.
*<HGDC------------------------------------------------------------------
* Global constants
*HGDC>------------------------------------------------------------------
CONSTANTS:
gc_indir LIKE epsf-epsdirnam
VALUE '/interfaces/<SID>/inbound/', " Default inbound directory template
gc_infile LIKE epsf-epsfilnam VALUE 'input'. " Default inbound file name
*<HGDC------------------------------------------------------------------
* Global data
*HGDC>------------------------------------------------------------------
DATA:
gs_dynpfields TYPE dynpread, " Fields of the current screen
gt_dynpfields LIKE STANDARD TABLE OF gs_dynpfields. " Table of the screen fields
*& Form file_open_dialog
* Opens a dialog window for the user to choose a file in
* the specified Unix directory.
* <--P_FILE is the file to be selected.
FORM file_open_dialog CHANGING p_file.
* Validate the directory.
OPEN DATASET p_indir FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
MESSAGE i001(zreiabsintfmc) WITH p_indir. " Unable to open the given directory
EXIT.
ENDIF.
CLOSE DATASET p_indir.
* Call the dialog window to open a file in the directory.
CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
EXPORTING
directory = p_indir
IMPORTING
serverfile = p_file
EXCEPTIONS
canceled_by_user = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE i002(zreiabsintfmc). " Failed to open the file.
EXIT.
ENDIF.
ENDFORM. " file_open_dialog
*& Form check_dir_change
* text
* --> p1 text
* <-- p2 text
FORM check_dir_change .
CLEAR gs_dynpfields.
CLEAR gt_dynpfields.
gs_dynpfields-fieldname = 'P_INDIR'.
gs_dynpfields-fieldvalue = p_indir.
APPEND gs_dynpfields TO gt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = gt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_dynpfields INTO gs_dynpfields INDEX 1.
p_indir = gs_dynpfields-fieldvalue.
ENDFORM. " check_dir_change
Thanks for all your answers! The problem is now solved.
Edited by: Ning Hu on Apr 9, 2008 11:32 AM
Edited by: Ning Hu on Apr 9, 2008 11:34 AM -
Event Structure Freezes Vi After Capturing The First Event
My Event structure catches the first instance of my button press but then it freezes my Vi. The reason is because of the while loop but I need the while loop to constantly read from a serial port and send data to a serial port. The vi included is stripped down to be just a while loop that does nothing. I have also tryed putting the event structure in the while loop, but the same thing is happening.
Any ideas?
Thanks,
Cason Clagg
SwRI
LabView 7.1, Windows XPAlso, put the button inside the event structure where it is acted upon, from LV help (suggest you read the entire events section of help):
When you trigger an event on a Boolean control configured with a latching mechanical action, the Boolean control does not reset to its default value until the block diagram reads the terminal on the Boolean control. You must read the terminal inside the event case for the mechanical action to work correctly. As a reminder, a note appears in the Edit Events dialog box when you configure a Value Change event on a latched Boolean control.
Refer to the Handling a Latched Stop Boolean Control in an Event Structure caveat for information about how to handle a latched Boolean control.
When you trigger an event on a Boolean control configured with a latching mechanical action, the Boolean control does not reset to its default value until the block diagram reads the terminal on the Boolean control. You must read the terminal inside the event case for the mechanical action to work correctly. As a reminder, a note appears in the Edit Events dialog box when you configure a Value Change event on a latched Boolean control.
Refer to the Handling a Latched Stop Boolean Control in an Event Structure caveat for information about how to handle a latched Boolean control.
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
Hi All,
Could anyone let me know if there is any sap standard program which will give all the changed data for OM related Infotypes? I know we have some idoc types which can do this, but I am looking for some standard program.
Please help.
thanks
shyamHi Suresh,
Thanks for the information. But I am unable to see any documents in the table T77CDOC_CUST even though I made some changes to the OM data for a particular object. I see that there is a SWITCH in the above table which needs to be activated..I think in my system it is not active..So could you please let me know how can I activate this?
Many thanks -
Capturing the DML changes on the source and writing to a temporary table
Am trying to set up a change data capture where both the source and target would be the same database.
like in my case i would like to capture changes from a table schema.xyz in a orcl database and write it to a temp table within the same database. My concern here is , the table schema.xyz is already replicating to a different database on a different server.
Any ideas on how this can be achieved?
I thought of setting up a different extract process and capture the changes and write to the temp table , but not sure if this is manageable.
Thanks,
Venky.Just tap into the existing trail if the change data is already there. There's no need to have a second extract in that case. So ADD REPLICAT and specify the EXTTRAIL the same as the EXTTRAIL for the redo log extract.
OGG won't pick up truncates by default. If the row is gone before the update arrives at the target table then you can use INSERTMISSINGUPDATES. When using this parameter make sure that you add supplemental logging (ADD TRANDATA) for columns that you need but that may not be updated (e.g. target columns with NOT NULL or FK constraints).
Good luck,
-joe -
Query to retrieve data from action infotype based on particular actiontype
Hi folks,
I need some help in retrieving data from infotype 0000.
The records for a certain employee id (10035532) for action infotype are as follows.. I trying to retireve the LOA action records
BEGDA-ENDDA-MASSN-MASSG
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 - 02/29/2008 - Z2 - 05
4. 01/20/2008 - 02/09/2008 - ZB - 07
5 01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
I have to retrieve the Z5 record for this employee. For every Z7 there is a corresponding Z5 record that links to the LOA records, in most cases the Z5 is immediately followed by Z7 record. I am able to retrieve such records successfully. However for few employees like one here the Z5 record is the fourth or fifth record down from the Z7. How can i retrieve the record in such a case?
Also in some cases the date ranges are missing in between, in such cases can we retirieve data succesfully? For ex:
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 - - Z2 - 05
4. 01/20/2008 - - ZB - 07
5 *01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
Need some inputs on the query here.
Thanks in advance,
VGNo responses. The thread is closed.
VG -
Hi friends,
I need to create one DDL trigger to Capture the all DDL modification on parent database and applies those changes to the underlying (child) databases in my project.
Can anyone help me out in this,how to track the changes and applies to the child level databases?
Thanks in Advance.Use Visual Studio Data Tools or
Red Gate Compare. -
Switch: delay during the first change of children
Hello,
in my scene graph I use a Switch. This Switch has three children, whereof always one is visible. Depending on the viewing direction, I change the active Child. It works very well, but
there is still alittle problem, when the change between the children is done for the first time. I mean, when i start the program the first child is active. During changing the
viewing direction the second child will become active, in this moment there is a little delay. The same when the third child is activated for the first time. After that the change of
the children works fluently.
I think in the beginning, the other children have to be loaded in the buffer. How can I do this, before showing my canvas?!
Perhaps you can give me some methods, which I should use, that would it make easier.
With kind regards
Gunnar SchroederHi,
I'm sorry I can't answer your question, but do I understand that you are using the SwitchInterpolator to change the View object of your View graph?
I'm looking to do something like that in my game: top view vs. first person view.
Was it difficult, it is just a matter of adding a SwitchGroup to your View graph?
Thanks! -
How to capture the first execution of a report
Hi,
I am executing a report in background. The first time the report is executed I have to do a different processing. After the 1st execution I have to different processing.
Someone please tell me how to capture the 1st execution of a report. Is there a system variable ?
Appreciate your <removed by moderator> response.
Thanks,
Dikshitha G
Edited by: Thomas Zloch on May 12, 2011 11:36 AMKeshav.T wrote:
Are you going to create a Z table for this ???? ... Is there nobody to advice you in your firm ???
Hello Keshav,
A couple of years ago i would have recommended using the INDX table, but it has got it's demerits.
Maintenance of Z-table is easier than the INDX table. Say there is some error in the program & you want to override the flag. Will it be easier to do so in the INDX table or via SM30 for the Z-Table?
As a matter-of-fact i will recommend using the solution provided by Florian the TVARVC technique.
1. Create a parameter(specific to your program) & transport it.(See the trxn STVARV)
2. In your program check the value of this param & set it accordingly.
Using TVARVC you will 2 birds with one stone:
1. You don't have to create a custom table.
2. Easy maintenance via STVARV trxn.
Hope you get the point!
Cheers,
Suhas
PS: In our system we have a Z-table designed specifically for this particular purpose. All the programs having this kind of requirement refer to this table. -
How to capture the product change on the item level in CRM GUI.
Dear All:
There is a line item in the sales order. Now I change the product of the line item. I want to capture the change in CRM GUI.
PS:
There is a reference thread, in which I know we can capture the change in WebUI with the component T115IT_SLSO.
Can the old product be captured after I changed the product in order item?
But I want to know how to capture the change in GUI. Anybody can help me? Thanks in advance.Hi,
when you create an item in GUI tcode CRMD_ORDER, badi CRM_ORDERADM_I_BADI will be triggered.
Method CRM_ORDERADM_I_PRODUCT_DETERM will have the Header and item guid and newly entered product in parameter IV_ORDERED_PRODUCT.
Regards,
Arun -
Table name for Info-record where i can get the last changed date and user
Using ME12, i have changed the price of the info record i want to get the who was the user and changed date...
I had check in EINA EINE but i couldnt find out please anybody Please help me out by providing solution for this??Hi
If at the data element level the field for which you want to know the old and new fields the option of CHANGE DOCUMENT option must be enabled ,then you can find the old and new values in the
CDHDR -
Change document header
CDPOS -
Change document items.
Regards
Pavan -
Report to generate the First Delivery Date in STAR/R3 system
Hi SAP Community,
I would like to generate a report for the first date for each sales order entered in SAP (STAR/R3 system). Can you please help to identify the transaction code to generate this report?Hello,
Use enhancement userexit_field_modification in include MV45AFZZ for delivery block LIFSK in VBAK Table.
below is the sample code for it.
if (write specific condition)
vbak-lifsk = '1' to '9'.
else.
vbak-lifsk = ' ' .
endif. -
How to get the latest Change date and time of a M.O. from View VIAUFKST
Hi All,
I want to get the latest date and time of a M.O. from view
VIAUFKST. I have written the query like this...
SELECT AUFNR
AEDAT " Changed Date
AEZEIT " Changed Time
FROM VIAUFKST
INTO TABLE I_VIAUFKST
WHERE AEDAT >= W_LASTRUN_DATE
ORDER BY AEDAT DESCENDING.
but its not giving me right results... Pls help me out on this or suggest me the right approach to achieve the same...As this is very critical issue...
Advance Thanks and Points Gauranteed...
Suresh> SELECT AUFNR
> AEDAT
> AEZEIT
> FROM VIAUFKST
> INTO TABLE I_VIAUFKST
> WHERE AEDAT >= W_LASTRUN_DATE.
>
> IF NOT I_VIAUFKST[] IS INITIAL.
> SORT I_VIAUFKST BY AEDAT AEZEIT DESCENDING.
> READ TABLE I_VIAUFKST INDEX 1.
> ENDIF.
>
> The above statement is giving me different results...
> such as...
>
> 1. 30/11/2005 19:20:11
> 2. 29/11/2005 22:10:09
> 3. 30/11/2005 20:56:09
> 4. 28/11/2005 23:10:09
>
> by using the above SORT statement i am getting the
> fourth record as the latest, where as it should give
> me the third record....
>
> Please advise,
> Suresh.
Hi Suresh,
The reason why you are getting this result is because the system is interpreting the DESCENDING only for AEZEIT not for both. Change it to
SORT I_VIAUFKST BY AEDAT DESCENDING AEZEIT DESCENDING
Maybe you are looking for
-
Error while importting Transport Request
Hi, I am getting following errors while Transporting requests from Development to Test System Error getting fields for PSA /BIC/B0000643 Error occurred during post-handling RS_AFTER_IMPORT ofr DTPA L The Transport request just contains one Transforma
-
I'm using a third generation 20gb ipod. Today the touch pad completely died. It is acting like it is stuck on hold and the touch pad has been disengaged even though the hold button is in the off position. I tried to reset it, but it is completely unr
-
From the Menu bar select + tools + options + privacy + use custom settings for history + Keep until: I close Firefox: Firefox 10.0.2 doesn't delete cookies when Firefox is closed when selecting: Keep until: I close Firefox: Please advise Thanks :)
-
Adobe Photoshop CS 5.5 silent install command line
Dear Professionals I would like to know what is the sielnt command line for adobe photoshop CS 5.5 to deploy it from SCCM 2012 R2 Aplication Catalog I tried the AMMEE to create MSi package but it says the media this version is not supported by am
-
Need to get a SCCM DCM CI created to check following configuration on SQL Server infra. Determine the list of users/groups in sysadmin role Any group/user in the sysadmin role also a member of the Administrators group for the host server. (IF So, Non