Capturing MERGE errors

I am trying to capture errors coming out of the MERGE statement (in 9i). Currently when a record causes an ABEND, I get a 'end-of-file on communication channel' message and everything stops. What I would like to do is capture the offending record's key so that I can fix the record. Has anyone had any experience with error handling in MERGE? I can't find any documentation about this.
Thanks in advance!

Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi ‏48 KB
Util.Error.Merge.vi ‏27 KB

Similar Messages

Capturing webutil errors

I am currently implementing forms10g and I am switch all of my for over to use webutil. When running the client_image.read_image_file and I am getting a wut-129 error cannot find image file which is fine, but I want to capture this error or at least do an exception on it. Any idea and how to do this?

Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi ‏48 KB
Util.Error.Merge.vi ‏27 KB

Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)

That is an issue for the developer of that Download Helper.

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Capture an error while creating a purchase requisition (BAPI_PR_CREATE)

Hi All,
    I am using FM BAPI_PR_CREATE to create purchase requesition, Now my problem is that i have various items for single material now i wan to capture the error if any item has ?
Please let me know how to do so?
Thanks & Regards,
Ruchi Tiwari

Hi,
To get the error messages after the BAPI_PR_CREATE is called,
loop at the return table which will contain the system messages and call the following FM
CALL FUNCTION 'FORMAT_MESSAGE'
        EXPORTING
          ID        = LS_MESSAGES-MSGID
          LANG      = '-D'
          NO        = LS_MESSAGES-MSGNR
          V1        = LS_MESSAGES-MSGV1
          V2        = LS_MESSAGES-MSGV2
          V3        = LS_MESSAGES-MSGV3
          V4        = LS_MESSAGES-MSGV4
        IMPORTING
          MSG       = LV_MESSAGE
        EXCEPTIONS
          NOT_FOUND = 1
          OTHERS    = 2.
      IF SY-SUBRC 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

How to capture Exception error message in Odata ?

Hi,
I am new to sap gateway. Currently i am creating a Odata Service through the transaction SEGW. In the query i have mapped a RFC. When i execute the service sometimes the RFC throws exception like 'No data Found'. But i dont know how to capture the exception returned from the RFC.
I read some threads which says use
RAISE EXCEPTION TYPE /IWBEP/CX_MGW_BUSI_EXCEPTION
      EXPORTING
        textid            = /iwbep/cx_mgw_busi_exception=>business_error
        message       = lv_text
        message_container = io_message_container.
My doubt is since i have not done any code in the DPC method. As said in many threads should i go to DPC_EXT method and redefine the method or how to capture the exception.
Kindly advise. Thanks in advance

Hello Velsankar,
You need not to capture the error messages explicitly by writing custom code in you DPC_EXT if you are using service builder when the return error message table is of type BAPIRET2.
GW itself will handle and return the error messages.
If at all the return error message table is of different type , i mean to say if it is not of type BAPIRET2 then you need to capture explicitly.
The below is the code you need to write in DPC_EXT to capture.
DATA: LO_MECO TYPE REF TO /IWBEP/IF_MESSAGE_CONTAINER.
DATA: LX_BUSI_EXC TYPE REF TO /IWBEP/CX_MGW_BUSI_EXCEPTION.
        LO_MECO = MO_CONTEXT->GET_MESSAGE_CONTAINER( ).
         LO_MECO->ADD_MESSAGES_FROM_BAPI( IT_BAPI_MESSAGES = LT_ERR_RET_TAB ).
         CREATE OBJECT LX_BUSI_EXC
           EXPORTING
             MESSAGE_CONTAINER = LO_MECO.
         RAISE EXCEPTION LX_BUSI_EXC.
Note : where LT_ERR_RET_TAB is your internal table where you would have captured all the error messages.
That is it. You will be able to see the messages .
Regards,
Ashwin

Batch Capture : Timecode Error?

So I am attempting to capture my first video onto FCP from my Canon XL. I have about 5 minutes of video and I have logged the info for each clip. They are all in my "Bin 1" and it is set as a "logging bin." The first logged clip that i want it to capture i have marked the "In Point" at 00:00:00;00 and the "Out Point" at around 00:01:09;24. The rest of my 11 clips just go in order (i.e. 2nd clip: In = 00:01:09;25 etc...). After doing all of this I click on "Batch" under the "Capture" option, a big black screen pops up over my FCP with the capture info underneath the black screen in a gray strip. My camera then rewinds to the beginning and STOPS. I then have to sit and wait for anythin to happen, my camera still saying "STOP," and then a message pops up reading the following:
Batch Capture: Timecode Error: Unable to locate the specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operation.
I have no idea what this means and I am beginning to get impatient with capturing my video. In the Log and Capture window, the tab that says Logging, i did not mess with the "Markers." I don't know if this matters.
Any help would be GREATLY appreciated so that I can start editing my project with this wonderful software otherwise.
God bless,
|-(|:^D
`

In standard trim, FCP needs at least 5 seconds preroll before capturing. The preroll is so the tape can get up to speed, the heads read timecode accurately and so on. You have discovered what happens when you give it no oppertunity to sort itself out.
The simple answer for your current situation is to set your first in point 10 seconds after the start of the time code. Be sure to make sure your last clip's OUT point is 10 seconds or more before the end of time code or you can have problems at that end of the capture as well.
The long term answer is next time let the camera run for a minute or two before you start recording anything you will want to keep. The same is true for the end of the tape - let it run for another half minute or so.
Cheers,
x

HI All Capturing the error records in an internal table

Hi All,
         I am retrieving the data from application server .
        My requirement is to :
     Check if the Measurement Point Id provided in the file is a valid one or not. Query the table EUITRANS by passing the Measurement point Id in the EXT_UI field. If the query is successful, then proceed to next step. If not, log it in the error log with error message DM-001 and proceed with the next Measurement point id.
so i nee the code for capturing the error log with error message.
pls provide me ASAP.
Thanks&Regards,
Bharat

Hi,
if you like do display all messages online have a look at FM:
'MESSAGES_INITIALIZE'
'MESSAGE_STORE'
'MESSAGES_SHOW'
If you want to write application log look at function group SBAL modules BAL_LOG*. There is also a good documentation in SAPDOCU..
Kind regards,
HP

Capturing Application Error log from SXMB_Moni

Hi,
I wanted to capture the error information from Application error log from ECC sxmb_moni and forward that as email alert.
We have already alert configuration in place with alert category using standard variables. Was wondering if I have to capture application error log from sxmb_moni what would be steps involved. Please let me know if anybody has worked on this and appreciate your help on this.
Sample Error message from sxmb_moni of ECC system
MT_Fault
Error in Application System
Detailed Information
Process Order invalid
Thanks
Selvam
Edited by: Selvam_muthu on Jun 23, 2011 5:40 PM

Hi Selvam,
As the exception is raised in ECC system, alert cannot be trigger, alert will get trigger when there is a error in PI system. To raise a email, write additional code in ECC to trigger the e-mail with proper error content

How to capture the error messages from incorrect session?

Hi SDNs.,
i am using BDC Session method to update transaction FB01. So my job runs daily. here i want to capture the error messages and i want to send it to mail. Can i capture the unprocessed records???
i think FM <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b> used for sending mail? but how to capture mes or records?
or Is there any other way to Do it???
Thankning you.,
Ram

Hi Ramakrishna,
Once you create the session, Process the session using
the report RSBDCSUB using submit statement.
It would list out the erroneous records.
Hence, while submitting, just say submit RSBDCSUB in background and export output list to memory.,
Then you can retrieve the list from memory using the FM LIST_FROM_MEMORY into the internal table and finally send the email by the fm you have already mentioned.
Regards,
Ravi

Capturing soap errors in PI

Dear Scn users,
I have a proxy->webservice scenario.
If there is something wrong while sending data to webservice(Ex:wrong username)there will be error which will be displayed as"invalid username" if we test using soap UI.
But in PI it will shown only as http 500 error,How to capture this error in PI like soap UI.
In PI also it should show as "Invalid Username".
How to achieve this.

Hi Raghu,
Check the below blogs
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
SOAP Fault in SAP PI: hijack it!
regards,
Harish

Capturing multiple errors

I thought that the Merge Errors would show me multiple errors (if they occurred). However, after reading more closely, I realized that Merge Errors will 'report the first error found'. I have a situation where there are 2 and sometimes 3 possible sources of error that I'd like to funnel into one Error Out and display all three errors. Is this possible, or do I have to have an Error Out for each Error in.

Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi ‏48 KB
Util.Error.Merge.vi ‏27 KB

Capturing the error messages generated by ALV Grid

Hi,
I have a ALV Grid, and a field date of DATS type.
If i enter wrong date a message pops up with invalid date entry.
How can i capture this error message in ALV Grid.

Hi,
Instead of displaying the error message directly, capture the message into a string variable and display it along with the grid display.
Thanks,
Sri.

To capture unix error in oracle

Hi,
when a pl/sql procedure is called through unix shell scripting, if the script is errored out due to any reason , i need to capture the error details in another table using unix. it it possible instead of capturing the errores in table level inside the procedure.

PL/SQL 101 : Exception Handling

Capturing SSIS Error line in a mail

Hi,
Can i capture an error message line in a mail instead of whole error message.

Write OnError events to log (or a database table). Check it for errors and generate the email off the retrieved content.
I have it done for a client so I use a query like
------ Get status of the load from today ------
SELECT * FROM [dbo].[sysssislog]
WHERE
starttime >= DATEADD(DAY, DATEDIFF(DAY, 0, GETDATE()), 0)
AND event like '%error%' -- check for errors
off the system table but it is a separate process in my case after a number of packages ran.
Arthur
MyBlog
Twitter

Capturing MERGE errors

Similar Messages

Maybe you are looking for