Capturing multiple errors
I thought that the Merge Errors would show me multiple errors (if they occurred). However, after reading more closely, I realized that Merge Errors will 'report the first error found'. I have a situation where there are 2 and sometimes 3 possible sources of error that I'd like to funnel into one Error Out and display all three errors. Is this possible, or do I have to have an Error Out for each Error in.
Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi 48 KB
Util.Error.Merge.vi 27 KB
Similar Messages
-
Handling Multiple Error Messages through EXIT_SAPMM06E_012 for ME28
Dear Team,
After Executing ME28, system will give List of PO's that are to be Released . User will select Multiple PO's and
Press Release button in Application toolbar. once it is relased, User will press save Icon for all released PO's.
Once Save icon is presed, I need to do Validation for Multiple PO's in the user Exit EXIT_SAPMM06E_012 and capture my
ErrorMessages for all Released PO's for which Validation fails.
Here in the given user Exit, one PO will be processed at a time as PO is defined as Import Parameter but it will handle all PO's
and give the output in status bar saying 'Relased Saved' for all PO's which succesfully gonethrough.
once we execute ME28, system is showing list output with PO's to be Released(As system is handling with Write statments). In this case, we dont have scenario of PBO and PAI Modules( where user can correct error if any validation fails) like we have for ME22,etc.
I have Written simpel Error Message in the User Exit.
once i tried to trigger my user exit by Releasing and Saving with One PO, Error Message is displayed ( as information Message
appears) and if i Press Exit button in Error Message, it is coming out of Transaction.
Is there any Possibilty to Handle Multiple Error Messages ( in my case for Valdiation Failed Po's) in ME28 ,after Releasing and Saving , and also user should not come out of Transaction once Error Messages are Displayed.
Thanks and Regards
SureshHi Suresh,
there is a tekpo table to handle all po items. you can put it in loop and do validations.
if any errors through, there may be a ex_messages table of type bapiret2.
or
try like this: MESSAGE E368(00) WITH TEXT-001 TEXT-002.
thanks
srinu
Edited by: srinu rao on Sep 22, 2009 3:43 AM -
I am currently implementing forms10g and I am switch all of my for over to use webutil. When running the client_image.read_image_file and I am getting a wut-129 error cannot find image file which is fine, but I want to capture this error or at least do an exception on it. Any idea and how to do this?
Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi 48 KB
Util.Error.Merge.vi 27 KB -
I am trying to capture errors coming out of the MERGE statement (in 9i). Currently when a record causes an ABEND, I get a 'end-of-file on communication channel' message and everything stops. What I would like to do is capture the offending record's key so that I can fix the record. Has anyone had any experience with error handling in MERGE? I can't find any documentation about this.
Thanks in advance!Hi mrbean,
If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors. They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal). In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge! Of course this isn't designed to address arrays of errors!
Cheers.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
Util.Error.Build.vi 48 KB
Util.Error.Merge.vi 27 KB -
Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)That is an issue for the developer of that Download Helper.
-
How to raise multiple error messages at a time in a BADI
Hi all,
I'm using CHECK method of BADI ME_PROCESS_PO_CUST for some validation in ME21N/ME22N. I want to raise multiple error message at a time, when user clicks on Check button or Save button. Please let me know, is there any function module for this or is there any particular procedure for this?
Thanks in Advance,
Siva Sankar.Hi,
Raising messages from within BAdis is not a good choice and from the look of it , it appears to be causing a dump.
Look if the BAdi interface has any exceptions defined for the method, if so, raise the exception with your message like:
MESSAGE e002(sy) WITH 'Error' RAISING <badi_exception>.
Otherwise call the FM POPUP_TO_CONFIRM To show msgs to user
Regards
Kiran Sure -
Capture an error while creating a purchase requisition (BAPI_PR_CREATE)
Hi All,
I am using FM BAPI_PR_CREATE to create purchase requesition, Now my problem is that i have various items for single material now i wan to capture the error if any item has ?
Please let me know how to do so?
Thanks & Regards,
Ruchi TiwariHi,
To get the error messages after the BAPI_PR_CREATE is called,
loop at the return table which will contain the system messages and call the following FM
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = LS_MESSAGES-MSGID
LANG = '-D'
NO = LS_MESSAGES-MSGNR
V1 = LS_MESSAGES-MSGV1
V2 = LS_MESSAGES-MSGV2
V3 = LS_MESSAGES-MSGV3
V4 = LS_MESSAGES-MSGV4
IMPORTING
MSG = LV_MESSAGE
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Getting multiple error while refreshing or scheduling WebI report
Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep GorpaduHi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra -
Help - Multiple errors occurred on the server while processing commands
I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit "ok" and then if i try to enable the iCal service, up pops up another window saying: "an error occurred onthe server while processing a command. Error 'CANNOTLOAD_BUNDLEERR' occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_calendar'
what's going on? how do i proceed to enable the iCal service? here is my error log:
servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:22:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:50 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a398170>
May 25 13:23:50 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:23:51 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a390c30>
May 25 13:23:51 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:58 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3cabf0>
May 25 13:23:58 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'setState' in plug-in: 'servermgr_calendar'
May 25 13:24:04 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396e50>
May 25 13:24:04 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:05 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396370>
May 25 13:24:05 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:24:10 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a38ad80>
May 25 13:24:10 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d6980>
May 25 13:24:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39a0d0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39b2a0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:41:33 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d55b0>
May 25 13:41:33 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:41:34 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3c1ba0>
May 25 13:41:34 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:36 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3835c0>
May 25 13:41:36 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themesno idea how to set up a dns. can you point me in the right direction? thanks
-
IF_EX_ME_PROCESS_PO_CUST multiple error message in the CHECK
Hi All
i search a way for multiple error message in the CHECK Methode, because i check every line.
INCLUDE MM_MESSAGES_MAC.
ch_failed = 'X'.
mmpur_message 'E' "&1 sy-msgty
'00' "&2 sy-msgid
'398' "&3 sy-msgno
'Werk nicht in allen Positionen gleich' "&4 sy-msgv1
'' "&5 sy-msgv2
'' "&6 sy-msgv3
''. "&7 sy-msgv4
ThanksHi
ME21N has also a Error Message BAPI for view Errors and i need multiple Messages on these step for each position -
Unable to download itunes 10.5 for windows 7. multiple errors
I get multiple errors while downloading itunes 10.5
during set up:
1. apple mobile device failed to start. Verify you have sufficient privileges to start system services.
2. An error occured during installation of assembly "Microsoft.VC80.CRT
error when trying to open itunes:
Apple application software not found. please uninstall, then instal again. Error 2
Ive already tried to uninstal and re install. Any help would be great!I also have problems just like you, but in order.
Fist . An error occured during installation of assembly "Microsoft.VC80.CRT
Second. Apple mobile device failed to start. Verify you have sufficient privileges to start system services.
LOL Apple =)) .
Now just wait for apple confirmed that bug, and fix it. -
Multiple Error message at Item Level....
Hi all,
I have some doubt into display multiple error message from item level.
The scenario is, I have to run some validation at each line item. If validation fails error message is population. Now suppose user ignore the error message or with that error user creating new line item and again because of validation some error occurs, then both error message should display all together but system is displaying only last message not previous one. This is happening with both the classes CL_BSP_WD_MESSAGE_SERVICE' and CL_CRM_GENIL_GLOBAL_MESS_CONT.
But if I check same thing with standard validation all error message display all together.
Any suggestion through which I can combined all message and display together.
Thanks
GauravYes.I have tried ADD_MESSAGE method of the CL_BSP_WD_MESSAGE_SERVICE class.
Thanks
Gaurav
Any suggestion from experts..
Regards
Gaurav
Edited by: Gaurav Mehta on Dec 3, 2010 2:18 PM -
How to capture Exception error message in Odata ?
Hi,
I am new to sap gateway. Currently i am creating a Odata Service through the transaction SEGW. In the query i have mapped a RFC. When i execute the service sometimes the RFC throws exception like 'No data Found'. But i dont know how to capture the exception returned from the RFC.
I read some threads which says use
RAISE EXCEPTION TYPE /IWBEP/CX_MGW_BUSI_EXCEPTION
EXPORTING
textid = /iwbep/cx_mgw_busi_exception=>business_error
message = lv_text
message_container = io_message_container.
My doubt is since i have not done any code in the DPC method. As said in many threads should i go to DPC_EXT method and redefine the method or how to capture the exception.
Kindly advise. Thanks in advanceHello Velsankar,
You need not to capture the error messages explicitly by writing custom code in you DPC_EXT if you are using service builder when the return error message table is of type BAPIRET2.
GW itself will handle and return the error messages.
If at all the return error message table is of different type , i mean to say if it is not of type BAPIRET2 then you need to capture explicitly.
The below is the code you need to write in DPC_EXT to capture.
DATA: LO_MECO TYPE REF TO /IWBEP/IF_MESSAGE_CONTAINER.
DATA: LX_BUSI_EXC TYPE REF TO /IWBEP/CX_MGW_BUSI_EXCEPTION.
LO_MECO = MO_CONTEXT->GET_MESSAGE_CONTAINER( ).
LO_MECO->ADD_MESSAGES_FROM_BAPI( IT_BAPI_MESSAGES = LT_ERR_RET_TAB ).
CREATE OBJECT LX_BUSI_EXC
EXPORTING
MESSAGE_CONTAINER = LO_MECO.
RAISE EXCEPTION LX_BUSI_EXC.
Note : where LT_ERR_RET_TAB is your internal table where you would have captured all the error messages.
That is it. You will be able to see the messages .
Regards,
Ashwin -
Batch Capture : Timecode Error?
So I am attempting to capture my first video onto FCP from my Canon XL. I have about 5 minutes of video and I have logged the info for each clip. They are all in my "Bin 1" and it is set as a "logging bin." The first logged clip that i want it to capture i have marked the "In Point" at 00:00:00;00 and the "Out Point" at around 00:01:09;24. The rest of my 11 clips just go in order (i.e. 2nd clip: In = 00:01:09;25 etc...). After doing all of this I click on "Batch" under the "Capture" option, a big black screen pops up over my FCP with the capture info underneath the black screen in a gray strip. My camera then rewinds to the beginning and STOPS. I then have to sit and wait for anythin to happen, my camera still saying "STOP," and then a message pops up reading the following:
Batch Capture: Timecode Error: Unable to locate the specified timecode. You may have specified a timecode with insufficient room for a pre/post roll operation.
I have no idea what this means and I am beginning to get impatient with capturing my video. In the Log and Capture window, the tab that says Logging, i did not mess with the "Markers." I don't know if this matters.
Any help would be GREATLY appreciated so that I can start editing my project with this wonderful software otherwise.
God bless,
|-(|:^D
`In standard trim, FCP needs at least 5 seconds preroll before capturing. The preroll is so the tape can get up to speed, the heads read timecode accurately and so on. You have discovered what happens when you give it no oppertunity to sort itself out.
The simple answer for your current situation is to set your first in point 10 seconds after the start of the time code. Be sure to make sure your last clip's OUT point is 10 seconds or more before the end of time code or you can have problems at that end of the capture as well.
The long term answer is next time let the camera run for a minute or two before you start recording anything you will want to keep. The same is true for the end of the tape - let it run for another half minute or so.
Cheers,
x -
HI All Capturing the error records in an internal table
Hi All,
I am retrieving the data from application server .
My requirement is to :
Check if the Measurement Point Id provided in the file is a valid one or not. Query the table EUITRANS by passing the Measurement point Id in the EXT_UI field. If the query is successful, then proceed to next step. If not, log it in the error log with error message DM-001 and proceed with the next Measurement point id.
so i nee the code for capturing the error log with error message.
pls provide me ASAP.
Thanks&Regards,
BharatHi,
if you like do display all messages online have a look at FM:
'MESSAGES_INITIALIZE'
'MESSAGE_STORE'
'MESSAGES_SHOW'
If you want to write application log look at function group SBAL modules BAL_LOG*. There is also a good documentation in SAPDOCU..
Kind regards,
HP
Maybe you are looking for
-
G/l a/c fast entry docment use
hi sap guru's what is the use of G/L a/c fast entry screen . what is the difference between to other documents posting of TC.F-02.
-
VAT 50% availment on Capital Goods
Hi! My client is asking for 50% availament on VAT also in case of cpaital goods purcahse in additonal to normal CENVAT. As per standard now, they can avail CENVAT 50%, but client is expecting same thing to be happen in case of VAT also. how can we ac
-
I have an 80 Gb hard drive on my flat panel iMac. I can account for approximately 36 Gb of that space using tools such as Disk Inventory X. However, Activity Monitor shows 55 Gb of usage. I'm trying to find the remaining 19 Gb and, if possible, recov
-
Hi, are there any binary operations in Java like '&' in C? I didn't found any information in the API description. Thank u.
-
Interaction enabled on dimensional columns though not marked as Use for display
Hi, I am facing issue with few of the dimensional columns in OBI 11g. Drill down property is enabled for few columns which are not marked as Use for Display or added to any hierarchy level. Clicking on these columns is drilling down to the next lower