Capturing to external drive on laptop

does any of you guys capture dv to external drive on laptop? how do you connect? daisy chain? I tried to connect harddrive to laptop and camera to the second fw port on the ext hd and that did not work. Does anyone had any success connecting camera to the harddrive and hd to laptop and capture this way?

I have Sony mini dv TRV-17 camera and a few fw drives. G-Technology G-Drive, LaCie d2, Smartdisk FireLite 80 bus powered and Fantom Drive 120GB. I did try with LaCie and Fantom without luck.

Similar Messages

Best way to move small subset of music from external drive to laptop?

I have all my music on an external harddrive. I want however, a small subset of that music to be on my laptop, so if I'm away from my external drive, I can listen to a few things. What's the best way to do each of these: moving one song, a playlist of songs or a random selection of songs.
Thanks,
JONATHON
I have a powerbook G4, OS/X: 10.4.11, i-tunes 9.1.1

Can you direct me to your solution?
I recently consolidated all of my 130GB of media onto an external hard drive [EHD}. Now I want to remove a remaining subset of 70GB still remaining on my laptop. Although attaching the external drive to laptop works well for listening to music, slightly more convenient would be to have a very small subset of music on my laptop. Most convenient, would be 10 or 20 of my favorite playlists, in sum, perhaps 1,000 mp3s. If I completely delete itunes [libraries and files] from the laptop, i think i understand how to transfer such playlists from the EHD to the laptop. However, I am not crystal clear as to the most efficient way to selectively 'copy' only the corresponding 1,000 mp3s from the EHD [comprising 130GB worth!] to the laptop? Thanks for pointing me in the right direction. Really appreciate it.

Please help me move my iTunes music from PC to external drive to laptop.

Okay, please, please help me!
And please know that I'm VERY computer illiterate and VERY frustrated right now. I've searched through dozens of answers to this questions and don't understand any of them. I don't know what a file is or what a folder is and I don't know how to "find" my iTunes folder. I have about 100 albums on iTunes and want to transfer them over to my laptop. I bought an external hard drive today don't know how to use it and the manual is useless.
I've looked at countless posts on here and most of them are riddled with terminology I don't understand. When you tell me to "find" my iTUNES folder...I don't know what that means or how to do that.
Please help me and keep in mind that you'll need to explain everything NOT LIKE I'M A 3 YEAR OLD....3 YEAR OLDS KNOW HOW TO DO THIS CRAP! Talk to me like a very, very computer illiterate adult. The PC(where the music is now)runs Windows XP and the laptop(where I want the music to be) is running Windows Vista
I will be forever grateful!
Thank you!
S-

Ok. Update. I think I have my iTunes library on my external drive. Now, I need to know how to get it onto my laptop. When I "import" into iTunes, it only lets me bring over one album at a time. Even then, when I unplug the external drive, it says that the file cannot be found and won't play. However, if the external drive is plugged in, it will play the album.
Thanks!

Captured to external drive, now iMovie won't work

I have a Mac formatted external drive and a friend (who is soon to become an ex-friend) talked me into capturing my movies on an external drive then editing from there (had been doing great up until then capturing to my internal drive). So I captured a 45 minute movie onto the external drive through the computer via iMovie. Used a Firewire 800 cable from the computer to the external HD and a 400 Firewire cable from the camera to the computer. It all went fine. Opened iMovie but instead of my normal event list, there were two folders marked "Event 1" and "Event 2". When I tried to clicked on the the first one, iMovie tried to "initialize" it but kept shutting down. I looked in the folder and the files were broken up into tiny 1 or 2 second movies which said "Q-DV". So I trashed those two folders then captured directly to the internal HD, but it did the same thing again! Made two folders which iMovie can't open. I looked in iMovie Preferences but don't see how to correct the problem. Have I ruined something?! I'm stuck. Can't do anything. Heeeeelllllp! (please)

Shame on me. I have to stop running to the forums every time some little thing goes wrong. Here's what happened: I tried to capture a project I had already rough cut on the PowerBook a few years back. The original was Super-8 footage which I'd had transferred professionally to a mini DV cassette. I had captured that on my PowerBook, done a rough cut, then transferred that to another brand new DV cassette. That's the one I tried transferring to the MacBook Pro. I'd done that before but with video originating from my DCR-PC100, so the source was DV. This morning I rooted around through my cassettes and found the original transfer cassette and tried capturing it directly to the internal drive of the MacBook Pro. It worked perfectly. So I guess the problem was the second generation capture of the Super-8 footage via the PowerBook (using iMovie2). However, I'm still dubious about capturing video through the MacBook (using the configuration I mentioned) to an external drive. Everything I've read so far about storing video on the external drive talks about moving it from the internal drive. I've yet to see anything about capturing to the external drive so I'm reluctant to ever try that again. Anyway, problem solved.

Cannot capture to external drive

been said before, by myself and others, here we go again.
Canon XH-A1 , HDV 1080i footage.
way back 6 months ago..
i couldnt capture to external disk on PBG4.
then i got a MBPro , still couldnt cap to external disk.
then i got a mac Pro , still cant cap to external disk.
at least it now captures to system drive,
at first it had unknown error, then just crashed on initializing log n capture,
reinstalled QT, trashed prefs, repaired permissions and kicked the dog.
APPLE!!!! FIX IT!!!

in the PBG4 it was a PCM FW400 card in the slot.
BUT,
if it will capture to the system drive then how would some supposed timecode problem prevent it capturing to an external drive?
so you reckon i should add PCIe FW card to the Mac Pro?
blimey..!!
also,
before changing to the MacPro FCP on MBP went crook,
adding a basic transition caused a crash,
re-opening the main sequence was gone,
finally found an autosave file in the trash!!
while i am here, other questions not answered elsewhere,
if i were to capture the camera's HDV tape info via component out into a Blackmagic card would that give a better overall quality?
would this make editing easier?
is there any difference in doing this (via cap card) versus changing the HDV to ProRes or PhotoJPG in the sequence?
Or,
would capturing from HDMI out (my camera doesn't have it, but just imagine),
into capture card, give a better quality image?
also,
would a card help with rendering times?
also,
since compressor is so slow and bad,
what is the best program to compress an excellent looking QT output file for writing a SD DVD?
so far the basic Visual Hub program does a better job much faster,
but still doesn't look very good on DVD,
what other programs are there?

FCP runs on Intel Mac Mini, but won't capture to external drive, HELP!!

Installed FCP 5.1 on Mac Mini Core Duo and it runs fine. It will capture fine too, but only to the main harddrive. If I plug in a firewire harddrive using a firewire hub it won't capture, and give a "No Video" error in the Log and Capture window. I've used both popwered and unpowered firewire hubs, and even tried daisy chaining the camcorder off the harddrive. Nothing has worked. And there is no space on the main harddrive to capture to.
I know there is a lot of speculation about whether FCP would even run on a Mini, but it will. If only I could capture it would be a reat capturing station. Has anyone had success? Its pretty frustrating as I've used the Power PC Mac Mini for capturing in FCP 5.0 without any problems. Why would apple make the new Mini crapier?

Never use FW hubs when capturing video. They only lead to grief.
Some cameras, particularly Canons, refuse to share the FW bus with anything. Could this be your problem?
If so, there is little I can think of to do with a Mini (or an iMac for that matter) beyond capturing from a different deck/camera that is more social than the Canons and their brethren. You only get the one FW bus.
But first thing to try is to get rid of the hub. Hook your fw drive to the computer and your camera to the FW drive.
Post back,
Patrick

Can i resume a Time Machine backup of an attached external drive (no system, just data) on a different laptop?

I am trying to find out if I can use a Time Machine (specifically on a 2013 Time Capsule) backup of an external drive (only data, no system) attached to a laptop, and then connect that same external drive to another laptop and resume the backup? Or is the Time Machine backup of an attached external drive a laptop "dependant" backup?
Additional info: The laptops in question are 15" MacBook Pro and a 17" MacBook Pro from 2011 running OSX 10.9 (Mavericks)

You are welcome.
I don't think there is a need to start a new discussion unless you want to.
You should have more than one backup of each computer. Hard drives do fail. Time Machine can alternate drives or have a Time Machine and a clone.
The concern arises because i was told that when a wireless Time Machine backup is interrupted the sparsebundle gets sort of "locked" or "damaged", and although the backups can be accessed, no further Time Machine backup is possible. One must that a brand new backup.
Apple support article. Don't let the title bother you. Look at Additional Information, which explains what happens when a backup gets interrupted. I also am including a link for troubleshooting. C3 explains what you can try if the backup is interrupted.
Time Machine First Backup Interrupted
Time Machine Troubleshooting

Use same external drive for 2 computers

On my desk top I use an external hard drive to store my pictures. It is named local disk (m:). I want to work on pictures with my laptop, but when I connect external drive to laptop, is named local disk (f:). LR does not recognize this drive. I want to switch back and forth between desk top and laptop.
Any ideas?

Ha! Sorry...wrong link (right link, actually, wrong thread).
You can just map the drive with explorer, or you can use disk manager to make the drive letter what you want it to be. Lastly, you can use a batch file and the SUBST command to map the drive.

Still cant capture to external disc

so i spent the money and got a new macbook pro 2.33,
installed FCP 2,
have a 250G external drive on the Firewire 800.
same problem as before with a canon XH-A1.
will not capture to external drive,
reports "general error" when hit escape,
all looks good until then.
can capture to the system drive.
this seems to be a particular problem with this camera and a powerbook/macbook.
anyone got this combination to work?

Mark,
I have a MacBook Pro as yours, a Canon PAL MVX4i (same as NTSC Optura 600), and some FW LaCie.
Contrary to other people experience in general I have no problem whatsoever to capture to the external disks, if the external disks are LaCie FW400 Porsche (I have 3 of them I bought at different times, the last one a month ago) - It does NOT work instead if I try to capture to the LaCie Rugged 80GB (FW800)!
When I successfully capture to the LaCie Porsche drives they are all 3 daisy chained to the FW800 port with an adapter cable, and the protocol I use is Firewire PAL (NOT Basic, but the full featured one); it works with the camera either connected to the MBP FW400 port or daisy chained with the other 3 disks. BTW this same configuration works also with my iMac G5.
But when I tried to capture to the Rugged drive (it was connected by itself to the same F800 port) FCE and FCP were getting stuck when I tried to start capturing, and the only way to resume was to either disconnect the camera or to force quit FCx.
This is my experience. A few more notes.
The 2 ports in the MacBook are based on the same FW bus (you can check it in the System Profile), and this seems to be the problem for some Canon/LaCie configurations. That's why in general using a FW card (with a dedicated FW bus) should solve the problem, even if personally I never used it.
The common opinion is that in fact there is (in some configurations) some incompatibility between the Canon and LaCie FW protocols.
Piero

RE: Capture Problems on External Drive/Audio drift over time

Greetings FCP gurus -
I posted earlier on the LAFCPUG board and now seek worldwide assistance with a problem I can't seem to resolve.
Been working in FCP since 1.5. Been successfully capturing on external FW devices for over 4 years with an old 500 MHz Powerbook - no problems.
I recently upgraded to FCP 5 Studio on a PowerBook 1.5 GHZ 512 RAM FW 4/8 machine. Prior to upgrade, I was running Panther (OS X 10.3X) and FCP 4.5 HD. This configuration allowed me to flawlessly capture to external FW drives from Panasonic AJ-D250 DVCPRO deck using a standard DVNTSC codec. Prior to that I was also able to do the same from a Sony DSR-11 deck. No longer.
I now get a constant audio "drift" every time I capture. I've tried shortening the clips to under 10 minutes - even as small as 5 minutes - but the audio progressively drifts as the clip plays on. This is true in both FCP and QT. I completely reformatted the laptop/wiped the drive prior to install (Unjournaled) and it currently has 25 gig available disk space on the 80 gig internal drive. Additionally, I'm using LaCie 7200 RPM Oxford 911 chip-set external drives. I've tried with clean D2 FW 800 and Porsche FW 400 drives to no avail - even reformatted one and still no luck.
Current configurations attempted:
FW 800 PB port to FW 800 drive port/DVCPRO deck to FW 400 PB port
FW 800 PB port to FW 800 drive port/DVCPRO deck to FW 400 drive port
FW 400 PB port to FW 400 drive port/DVCPRO deck to FW 400 drive port
..and so on.
I'm at wit's end and appreciate any insight. Is anyone else having issues capturing to External FW media via FCP 5 Studio/OSX 10.4.x? I don't currently have the option of internal drives to capture as I'm working at a client site. Additionally, I sold my FCP 4.X upgrade software so going backwards is not an option either... Even took the deck home and tried this same trick on my home machine (Dual 500 G4 Sawtooth) to the internal ATA drive with the same result -...drifting audio. Since upgrade this is my first capture and needless to say it's not going well.
Help, information and insight are greatly appreciated. Thanks

Hi Expressofiend! Were you able to resolve this issue yet? We are having an IDENTICAL problem. We shoot on a Canon XL2, and thought that might be causing the audio drifting issue? We also have a Panasonic AD-J 250 deck, and when we capture, say an interview, the lip sync is perfect for a few minutes, then drifts as much as a second or two over 20 minutes of capture. It's making us crazy. Happens when we capture to an external LaCie or our internal drive. We're using Apple's 2.7 gig duel processor computer. 2 Gig of ram, all the latest versions of Tiger, Final Cut Pro 5, etc. If we look at the Quicktime movie - it shows the audio drift - you don't even need to view it through Final Cut!
Interestingly, if we use the Canon XL2 camera as the source player when we capture the 20 minute piece - there is NO audio drift or syncing problem. Only with the AJD 250! We've spoken with the senior engineer at Panasonic - he doesn't think it's the DVCPro unit. Says drifting audio isn't the kind of thing an out of adjustment or broken deck would do.
Anyway, any answers here yet?
Thanks,
Larry

How to have three Windows laptops share one iTunes library stored on a networked external drive?

We just replaced our one desktop PC with three laptops. Each laptop wants to access the same iTunes library, which now resides on an external drive connected to the network via our router. How can this be done, and if one laptop adds a file to the library, will the other two see it?

Tom DePrenda wrote:
I used the consolidate library feature and it moved all the music to the appropriate iTunes folder on the Share.
Good!
I have the Vista laptop pointing to the Share for the iTunes Media folder location.
Good!
The question is how do I add the files to her library?
Go to your File menu and use the command Add Folder to Library. When the dialog comes up, point it to the Music folder in the Share area. But read on first...
Also do I keep the boxes checked "Keep iTunes Media folder organized"
You must turn off the "Keep..." option. Otherwise, when one of you changes a tag, iTunes will re-"organize" and the other person's iTunes will lose the link.
The "Copy..." option should also be turned off. As you add new music, put it where you want it. Then you must "Add File to Library" from each iTunes.

HT4527 I have a new laptop/PC, and I want to keep content of iTunes on an external drive, how do I set this up?

I have a new laptop/pc, and I am trying to set up iTunes on it; but I want to keep content on an external drive (lots of movies/books/etc.). I know I will not be able to see when not hooked up to that drive, or sync with out it. What is the best way to go about setting this up.

Hi drnels,
Are you saying you still have access to the backup? If you do, you should take a look at [[Backing up your information]]. It will show you where all of your personal information is stored in Firefox and how you can copy it to a new install.
Hopefully this helps!

One person, one iPhone, one laptop. Two homes in two states, two external drives, two identical copies of my music library. Many headaches.

I feel like this question is asked endlessly on these boards, but somehow I still can't find a relevant answer... So, apologies for rehashing a variant of the same question!
I have one (ancient) MacBook Pro, and one (ancient) iPhone. I carry both back and forth between two states: the state where I work and the state where I live the rest of the time. My ancient MBP and my ancient iPhone are too small to carry my whole music collection (which is quite large—larger than a new phone or laptop would reasonably support, anyway). My mobile apps and my podcasts live on my laptop, but my music library lives on an external drive. I have two external drives now, one in each state where I live/work. I also have a copy of everything on my desktop machine at work, but I've given up long ago trying to sync to multiple computers. I'll settle for now for syncing to one computer (my MBP), which sometimes is connected to one copy of my library, and sometimes is connected to another copy of my library.
I know that I can make multiple iTunes libraries, with duplicate copies of my podcast subscriptions, my apps, and my playlists and music, and keep switching which one my phone is set to sync to (wiping it each time, and possibly losing some settings in the process?) But that's a pain in the neck. Plus, it's hard to keep my podcasts active in both libraries, because iTunes podcast subscriptions are like frail little tamagotchi critters that need constant love, nurturing, and encouragement, or else they wither and die.
Is there any way to have a single library, with my apps and podcasts on the laptop, which just happens to make use of the "local" copies of my music on whichever external drive happens to be attached?
Or do I need the google cloud + android if I want to unify my listening and syncing life?
Thanks!

Hi,
There are several reasons which may cause the backup to be full instead of incremental, such as source volume snapshot is deleted, from which the last backup was taken.
For more detailed information, please refer to the thread below:
control incremental vs full backup on W2k8 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7820edc7-18ef-4f6e-bb50-f87f4a728597/control-incremental-vs-full-backup-on-w2k8-r2?forum=windowsbackup
There is a similar thread, please go through it to help troubleshoot this issue:
Understanding Windows Small Business Server 2008 Backup - Full and Incremental with 2 Backup Destinations
http://social.technet.microsoft.com/Forums/en-US/bdb3c5ae-81dc-4f54-a39e-4b888ee52476/understanding-windows-small-business-server-2008-backup-full-and-incremental-with-2-backup
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

How do I share music on external drive with 2 laptops

We have 2 laptops in our household, my macbook and my partners iBook. Is there a way of keeping all of our music in one folder on the external drive and have it accessible to both computers, each with their own itunes library? Or does each computer need to have it's own iTunes music folder? As we share some but not all of the same taste in music it seems a waste of space to duplicate music files on the same drive.

The sync options relate to the iPod connected, not the library itself, so you can use different iPods with different sync options with the same library.
The problem with sharing your library over the network is that the computer which "owns" the library on the external drive always has to be near (and powered on) when the other computer wants to access it.
But you can have one library (.XML) file per computer, and still store your music on the external drive: just go to iTunes menu > Preferences > Advanced > General and uncheck "Copy files to iTunes Music folder when adding to library". Now you still have to import the files on the external drive once per computer, but they will not be duplicated.

Capturing to external drive on laptop

Similar Messages

Maybe you are looking for