Card reader works on 17 inch PowerBook but not on 12 inch

I have a Compact Flash Card reader (Zio!) that works on my 17 inch PowerBook, but on my 12 inch it does not show up on the desktop when a card is inserted.
I have another card reader (Belkin) that works on the 12 inch but it is twice as large and uses a cable. The Zio! attachs directly to the USB port.
There is probably a driver on the 17 inch that is making the card reader work. Is there a way to locate this.
I didn't have any luck finding a Macintosh driver on line.
Photoscene
PowerBook G4 17 inch, PowerBook G4 12 inch Mac OS X (10.4.7) Tiger/Panther

I went ahead and reset the Open Firmware along with the PRAM and PMU.
It didn't show in System Profiler on either PowerBook. I think I'm going to let it go. A card reader that attaches directly to a USB port without a cable will also get in the way of the other ports.
I have the Belkin USB card reader that reads any card. I'm going to be upgrading to a Sandisk Firewire reader just CF cards.
http://www.bhphotovideo.com/bnh/controller/home?O=Search&A=details&Q=&sku=446772 &is=REG&addedTroughType=search
Thanks for the help.
Photoscene
PowerBook G4 17 inch, PowerBook G4 12 inch Mac OS X (10.4.7) Tiger/Panther

Similar Messages

Does lightning SD card reader work with iPad Mini and iOS7?

I order new iPad Mini Retina and wan to know;
does the lightning SD card read works with iOS7?

Yes.

IPod nano works with USB 1.1 but not USB 2.0

Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

I have a similar problem with the following configuration:
- Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
- PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
What works well?
- All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
- iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
- iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
What doesn't works?
My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
- Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
- iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
- iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
Help!!!!!!!!!!!!!!!!

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away

FaceTime: I have a iPad, iPhone, iMac all on the same apple Id/account. Without changing id/email address can I use FaceTime between any 2 of my devices? It works from iPad to iPhone but not the other way??? I would like talk/see my kids if am away.
Hope you can help.
I have added a new email address but kept my Id, but I get busy when trying from iPhone to iPad as they are clashing. Like find my iPhone app hence trying to keep them all on one account

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

I Just signed in to find the answer to this too. I started having the same trouble today.

BDC with call transaction VD02 works fin in A mode but not in N mode

Hi All,
I have BDC program developed in 4.6c using call transaction VD02 works fine with mode A but not with mode N.
Now we upgraded to ECC 6.0.Do I need to change anything?

No, you don't have to change anything for ECC. BTW, I wonder why VD02 is not working in the background for you?

Works in Main Application mode but not the orange NXT mode for some NXT's

A simple Labview program designed using only NXT VI's worked in the Main Application but not in NXT mode. For some NXT's it worked in both modes but for others, just in Main Application mode. I've tried updating the firmware and plugging and unplugging the USB. Any thoughts?

I see. The problem is probably that when you are switching to the NXT Target mode, it is expecting to target the other brick to which you already deployed. If you right-click on the orange banner menu in the lower left corner, you should be able to select the other NXT, or use "Find NXT..." to scan/search for bricks.
Also, I reccommend giving all your NXTs unique names so this is more obvious. (you can use the NXT Terminal tool to do that).
If you still can't get the VI to run in target mode, restart labview.

How do I enable auto-complete for gmail password? I have five accounts and it works for 3 of them but not the other 2.

I have five gmail accounts. Three of them have the auto-complete feature enabled for the password. The two most recent accounts do not auto-fill so I must type in my password every time. The auto-fill works fine on my laptop but not on my desk-top. My operating system is Windows XP.

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Try Restarting / rebooting your Mac before doing anything more drastic..
S.

The autofill feature worked on my iPad 2, but not on the New iPad. Anyone know why?

The autofill feature worked on my iPad 2, but not on the New iPad. Anyone know why?

Go to Settings>Safari>Auto Fill>On .... Names and Passwords>On .... Use Contact Info>On. Make sure that your contact information is correct.
Then quit Settings and Safari completely and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
See if that helps.

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

How do I send group emails from my iPad? They work fine from my MacBook but not the iPad.

How do I send group emails from an iPad? They work fine on my MacBook but not my iPad.

You need a third party app to do that. Look at Mail Shot or Group Email in the app store. You cannot do it with the built in mail app and the contacts app in iOS 5 without a third party app.

At my home, Location Services work great on my iPhone but not at all on my iPad.

At my home, Location Services work great on my iPhone but not at all on my iPad.

Check to make sure they are turned on.. Settings > Location services > ON. You can also check to make sure certain apps you want to with location services are turned on as well!

External speakers work on the Apple side but not on the Windows side - did before but not now - need fix

New to discussion groups. Mac-Mini user. External speakers work on the Apple side but not on the Windows side. The used to but not now. need suggestion on fix or do I go to Apple store or a PC repair store?

Reset the SMC 2-3 times. Click Intel iMac SMC and PRAM resets for instructions.

Card reader works on 17 inch PowerBook but not on 12 inch

Similar Messages

Maybe you are looking for