Cash jorurnal problem

HI,
I am doing FBCJ (cash journal), While doing fist time i could not see the opening balance. How can i get the opening balane
what is the process to do, to appear opening balance
Pls URGENT
Rgds
sunfico

Hi,
Please do as specified in  Note 377853 - FBCJ: Opening and closing balance.
Summary
Symptom
This note is an advice note for the FI cash journal. It answers the following questions:
How is the opening balance of a period calculated in the cash journal?
How is the closing balance calculated?
What are the relevant notes?
Additional key words
Cash journal, opening balance, closing balance, fiscal year balance carryforward, balance table, balance carryforward
Cause and prerequisites
None
Solution
General notes:
If you want to create and execute a new cash journal, then you need the required Customizing to do this, among other things you must also specify a G/L account to which the documents from the cash journal should be posted. It is recommendable to create a new account for this, however, you can also use an existing account.
In the latter case, you must bring the corresponding G/L account in the general ledger to balance 0 using a manual clearing entry at the start of the exclusive postings via the cash journal. Then change the account to "Post automatically only" in the master record, and then you can use the cash journal as an opening balance to repost the amount that is posted to the clearing account,and you then have the corresponding amount as the first posting.
The first time you use the cash journal, therefore, the cash journal is balanced to zero as well as the assigned G/L account in this currency (the account itself needs not be managed in the cash journal currency).
Note:
Please absolutely make sure that flag "Balances in local currency only"
is NOT set in the master record of the assigned G/L account!
For performance reasons, the system updates a balance total for the particular day that updates the cash on hand for this day in parallel to the individual postings for every posting in the cash journal. The information in this balance table is therefore redundant since you can obtain it at any time from the line items of the individual postings.
Calculating the opening balance
The system then reads the balance table to determine the opening balance and searches for the next entry that is before the starting date of the display period. This is generally the preceding day.
If there is such an entry, then the system displays it as the opening balance for the display period.
If the system does not find any preceding entry in the balance table or if the balance table is blank (for example, due to deletion by report RFCJ1 from Note 197898), then the entire document table of the cash journal runs, and the system calculates the balance until then in the cash journal. For this purpose, please implement Note 419959.
Caution:
This logic is new as of Note 371936 (R/3 Support Package 25 for Release 4.6B or 14 for Release 4.6C)
Up to then, when the system could not find a balance entry (in the balance table), the system read the fiscal year balance carryforward of the corresponding fiscal year in the relevant G/L account, and then it summed up all postings based on this from the first day of the fiscal year until the first day of the display period.
The procedure was similar on the first day of a new fiscal year: Here the system used the fiscal year carryforward as an opening balance directly and not the last preceding entry in the balance table.
This was no longer viable since inconsistancies could quickly arise due to a late fiscal year balance carryforward as well as posting to the G/L account with cash journals of several currencies. Therefore, check whether there really was a balance of zero when first using the cash journal.
Calculating the closing balance
The closing balance results from opening balance plus the total of the line items of the display period.
If this invoice is incorrect for a display period, there may be an inconsistancy within the documents. In this case, execute report RFCJ5 from Note 374505 (provided you are in a company code which is not subject to the (extended) withholding tax - if the latter is the case, contact SAP).
If the closing balance does not correspond with the opening balance of the display period that directly follows, then there is an incorrect entry in the balance table. In this case, execute report RFCJ1 from Note 197898 for the corresponding cash journal to remove this entry.
Relevant notes
197898 "FI cash journal: Difference betw.balance & line itm"
                      It contains report RFCJ1 for resetting the balance table
                      R/3 Support Package 15 (Rel.4.6B), R/3 Support Package 7 (Rel.4.6C)
323990 "FBCJ: wrong balance aftr deletng cash journal doc"
                      R/3 Support Package 15 (Rel.4.6B), R/3 Support Package 7 (Rel.4.6C)
324051 "FBCJ: Wrong balance aftr reversing cash journal doc"
                      R/3 Support Package 15 (Rel.4.6B), R/3 Support Package 7 (Rel.4.6C)
326619 "FBCJ: Wrong balance after resetting balance table"
                      R/3 Support Package 16 (Rel.4.6B), R/3 Support Package 7 (Rel.4.6C)
333222 "FBCJ: incorrect balance after check deposit"
                      R/3 Support Package 8 (Rel.4.6C only)
368409 "FBCJ: incrrct balance calcultn (46B:HP22, 46C:HP11)"
                      R/3 Support Package 25 (Rel.4.6B), R/3 Support Package 14 (Rel.4.6C)
371936 "FBCJ: Incorrect balance for fiscal year carryfwd"
                      R/3 Support Package 25 (Rel.4.6B), R/3 Support Package 14 (Rel.4.6C)
374505 "FBCJ: Amount changed in document -> wrong balance"
                      It contains report RFCJ5 for adjusting documents
                      R/3 Support Package 25 (Rel.4.6B), R/3 Support Package 15
        (Rel.4.6C)
"419959 FBCJ: Falscher Saldo nach Geschäftsjahresübergang"
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 12.07.2001  22:00:00
Priority: Recommendations/additional info
Category: Consulting
Primary Component: FI-BL-PT-CJ Cash Journal
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 46 46B 46B X
SAP_APPL 46C 46C 46C X
SAP_BASIS 46C 46D

Similar Messages

  • Orcale HRMS Seeded CASH report Problem

    Hi Gurus,
    I have some problem in Seeded report Cash. before it is running fine.
    It is running fine without the accounts i define in the payment method for cash. after i defining the accounts. my seeded cash report is not showing the list of payment methods in the parameters. and it is not effected to the payments alos. status is still the unpaid.
    I'm using R12.1.2 .please can anyone give me solution for this. thank you.

    Please see if these docs help.
    R12 "The Subledger Journal Entry Does Not Balance In The Entered Currency" Error While Create Accounting [ID 743441.1]
    Enhancement Request- Purchasing - Accounting [ID 1281525.1]
    Issues Related To R12 Create Accounting Process - List Of Code Fixes [ID 1179643.1]
    R12 - Troubleshooting Accounting Errors [ID 1112504.1]
    R12 Multi-Fund Account Receivables Accrual: Negative Misc Receipts and Receipt Reversal Fail During Accounting: The subledger journal entry does not balance in the entered currency. [ID 762218.1]
    Awt Wrongly Accounted On Cash Basis Accounting [ID 1294376.1]
    Thanks,
    Hussein

  • SAP EHP5 Cash Journal Problem

    Hi All
    We have upgraded our system to EHP 5 and now while trying to post Customer receipts in Cash Journal FBCJ
    when user is trying to make an entry with business area system gives the below message
    Account has been changed Should all account
    assignments be deleted in business transaction
    RECEIPT FROM CUSTOMRS ?
    this is a new message and was never observed before upgrade to EHP5 i am not able to identify the reason
    Has any one an idea for this message
    Will appreciate your help
    Bilal

    Hello Bilal
    We have recently upgraded our System to EHP5 Higher release.
    We also suffered in the problem as you mentioned.
    Please procceed the "SAP Note 1615150 - FBCJ: Incorrect account assignment query" for your problem.
    If problem not solved you can contact me directly,  and don't forget to reward points!
    Cheers!!!
    Anwer Waseem
    SAP NetWeaver TTL

  • CASH ONLY PROBLEMS?

    My wife and I recently moved from Japan to Florida from a military move, and decided to use Verizon for a wireless carrier. Since 2 days ago I reget this decision to the fullest. during our moving process we transferred our old plans into our names and reinstated them. we had both had droid pro's. While we were in the process of moving, I paid a bill online through my checking account, got a confirmation number from the payment and went about my business. 5 days later my phone service shut off without warning. I was immediately concerned, called verizon and was told that the payment i sent had been declined, so i immediately paid the months bill, and the next months bill as well to avoid any confusion whatsoever.  Our phones were turned back on in the next 15 minutes, and i recieved no adverse statements from the CSR's about my account or anything. now, for augusts bill, i hopped online and tried to pay it, and it said that am not eligible to pay online anymore, so i went to the store to pay, and i was then informed that my account had been moved to a "cash only" status, without any notification whatsoever, now  for the next six months i have to go up to the store and pay cash for my bills. to make this even more inconvenient my phone started having problems yesterday and i went through an hour and a half of troubleshooting to deem that my phone was bad and i would get a warranty phone replacement, however they can not send the phone to me, they will send the phone to a store, and i will have to leave my phone there, as a collateral untill the phone gets there AND PAY A FEE for the shipping of the phone.  I feel like I am totally getting the runaround from Verizon, and speaking to CSR's is not helping at all. the past 2 days i have spent over 6 hours going to verizon stores, talking on the phone to the reps, and trying to get my plan straight, without having to leave my phone there for a weekend and wait for the same "refurbished" (certified like new) phone i have been having problems with. this is so unacceptable and just frustrates me more and more, i am not a happy customer, and i realize this is partly my fault, but i guess companies do not understand. the other thing i would like to know out of this is where the cash only placement is stated in writing in the verizon terms of service and why verizon does not notify you that you have been moved to this payment plan whatsoever. i feel like it is a violation of contract. and i'm really fed up.

    You can probably purchase the iPad with cash at Best Buy.
    It has already been mentioned in this thread, there are signs in the store and the policy does indeed say a credit card is needed.
    {quote:title=from http://www.apple.com/legal/salespolicies/retailus.html :}{quote}
    iPad Sales Policies
    iPad purchases are limited to 2 per customer and must be purchased with a Credit >Card or Debit Card only.

  • Print Cash Sale problems

    Hi, I have a problem with the Print Cash Sales. When I run VA03 transaction and the Sale Order has a lot of positions, the first time I run the printing function, SAP only shows one line item. But then, when I try again, SAP shows all the line items.
    Could you, please, help me with this problem?
    Regards,
    Matías

    Hi,
    Check it out at VA02 for output of a cash sale, if it created auto delivery from VA01
    And get the print out or print preview what ever u want. Provided u should customize output determination prior to that.
    Hope it will work for you, as I'm getting like this.
    Bye

  • Cash Journal Problem

    Hi gurus,
    When I post a cash journal (expenses) in last fiscal year i.e. 2006 it is getting posted. But when I click on that particular expenses item it is showing two accounting documents. 1 is for 2006 and another is for 2007which  is already posted with different amount.. why it is happening like this. The reference key in the header document are same for both the documents. Some times it is posting 1 profit center document  sometimes it is posting 2 profit center document. When we reverse cash such kind of document journal with reversal reason  05 what will be the impact. What is reversal reason 05?
    Thanks in advance.
    Regards,
    Vikas.

    please check your number ranges assigned to document type SK cause the reference key used while posting to FI doesnot contain a year key thats why two document has been displayed
    reversal reason 5 is reverse the acruals and deferals

  • Direct Cash procedure: problem with FLQLI

    Hi all,
    While following the Direct cash procedure, there are some documents missing in transaction FLQLI.
    Any ideas about how to get them be displayed in FLQLI report?
    Many thanks in advance,
    Soumaya

    I found a solution and I wanted to share it.
    These transactions FLQC10 / FLQAD/ FLQAM have to be executed before running FLQLI.
    1. Transaction FLQC10 provides a line for each missing document in the report from FLQLI.
    2. Transaction FLQAD provides the "Partner" field
    3. Transaction FLQAM provides "Profit center" field
    Best regards,
    Soumaya

  • 80GB Classic will no longer sync with Outlook

    I have a 80GB Classic that will no longer sync my Outlook contacts or calender. It will sync everything else, music, movies, games, but than it just hangs. It will say that it is syncing and not to disconnect, but it will stay that way for hours and not do anything. I also have a 64GB touch that sync with the same library and the touch sync just fine. Does anybody have any ideals or suggestions?
    Thanks!

    Found out that my iPod was hanging on the photos not Outlook. Deleted the iPod Cashe and problem is sloved.

  • Classic will no longer sync podcasts with video.  I get sound only

    Hi
    I was haveing a great time with my ipod. Watching podcasts of all sorts. Then it stopped syncing podcasts (music is fine). I got error messages sometimes saying cannot sync as disc cannot be found.
    Then out of the blue it sunk some podcasts but with sound only. The downloaded podcasts show in podcast library and also I have copied them to a playlist I made myself called 'podcasts'. I did this once before but it disappeared. I am not desperate to save any of these current pods so dont mind dumping the lot ~(not music) and starting again if necessary.
    Please help, this is driving me nuts. No really techi advice please. Simple English would be great.
    Thanks in anticipation

    Found out that my iPod was hanging on the photos not Outlook. Deleted the iPod Cashe and problem is sloved.

  • EPub: when exporting or viewing document to ePub it crashes

    Have deleted preferences and cashes. Problem still there.
    Have saved document in IDML and then to INDD. Problem still exists.
    In the document I have built a 2 layer button with a mouse over and click funktion.
    It was fine viewing the ePub (inside InDesign) for a couple of times until it crashed, since then it always crashes.
    I cannot even export it as ePub anymore.

    Hi finliret,
    Can you please detail out the steps because of which you think this crash is happening.
    Or great would be if you can share your files with me so that i can further investigate on the reason.
    share on dropbox or mail me on :[email protected]  
    Thanks
    Monica Singh

  • How to Zero Debt After Account Closure Date in MDX Calculated Measure

    Thanks in advance to anyone who can help me with the below problem.
    I’m building a Finance cube, it holds all customers we have billed and any cash received against their debt. I have a few calculated measures that work out Total Debt, Total Cash. From these I have a calculated measure called Total Debt Outstanding which
    is (Total Debt - Total Cash)
    My problem, when an account is closed the debt is not always zero. We don’t always get all the cash to cover the debt so just write off the outstanding debt. I have a requirement to zero out the debt after closure date has passed. 
    If I look at the calculated measure [Total Debt Outstanding] today for all accounts it will include debt figures from closed accounts, I need the calculated measure
    [Total Debt Outstanding] to ignore this and not to inflate my current debt figure.
    Example
    Account 12345, Debt £3142 added on 15/03/2013, Cash £1,687
    received on 12/12/2013, Total Debt Outstanding £1107. The Account closed on 15/12/2013 with a balance of £1107, after the closure date I need the total Debtor outstanding figure to be £0 if you browse the cube with my date dimension. 
    My date dimension Hierarchies is Year-Quarter-Month-Day
    I have tried using the Scope function to Zero the Total Debt Outstanding figure after closure date but can’t get it to work. 
    My scope calculation is below:
    Scope([Measures].[Total Debt Outstanding]);
    This = IIF([Date].[Year-Quarter-Month-Day].Currentmember > [ClaimData].[Closed].[Closed].Currentmember,0,[Measures].[Total Debt Outstanding]);
    End Scope;
    My Account Opening and Closing dates are in my ClaimData fact table, with Opening Date linked to the date dimension. I can’t link Closing date as we don’t always have a closing date until the account closes, so SSAS errors.
    Many Thanks

    Hi,
    Try compare key value of members. For example,
    [Date].[Year-Quarter-Month-Day].Currentmember.Properties("key") > [ClaimData].[Closed].[Closed].Currentmember.Properties.("key")
    And think about UnknownMember in Date dimension. In this case you can link Closing date
    Best regards,
    Aleksandr Severin

  • Failed Executive Escalation

    I escalated my cash only status only to find they had no solutions for my issues either. Not being satisfied with the service I received from (removed) Fields, Executive relations, he had promised to send a letter to my address, so I would be able to retrieve a bank fee I received as a result of Verizon charging the wrong account on January 17th. Not to mention when he emailed me he addressed the email to the right address but wrong name (talk about not being just a number?) Well I did not get a letter, I wrote an email on February 19th to the Texas Division president informing her about the lack of resolution to my cash only issue, as well as the poor service received from Mr. Fields. To my surprise it was Mr. Fields who answered my complaint by calling me himself the next day. I have worked customer service my whole life and when you file a complaint with a huge company about a particular person, it is bad form to have the same person answer the complaint. This unprofessionalism is beyond disturbing. I want my cash only problem fixed, the problem was not my fault. Cash only as anyone can attest on this forum is of great inconvenience. Executive escalation is supposed to solve the problem but I still find myself in this terribly inconvenient situation. 
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

    The issue is when you sign up for auto pay it takes apparently 3 billing cycles to truly convert to the auto pay feature. After signing up for it after the millionth time they pushed it on me when I paid my bill, I transitioned from a small bank to a large bank due to the fact I travel often and had issues with my card being shut off all the time by the fraud department. I paid every month on time for years with no issues. Then my account several months after I sign up for it runs auto pay. I try to change the feature and it runs on this defunct account again after I change it. I use auto pay on several of my bills and changing the payment option has never been as hard as it was with Verizon, it is not user friendly in the least. It is pretty said when I feel the only option I have is to take this issue up In a Dallas County small claims court (thankfully they are liberal and pro-consumer courts!)

  • Tips for Getting Payday Loans in Australia

    There are times in everyone’s life where waiting until your paycheck, just won’t cut it. You need cash and you need it now. No matter the reason you need the money, past due bill, birthday present you need, medical emergency; payday loans are available. But how should one go about getting one? What is the procedure to getting a payday loan? Never fear, those answers are here.
    When you decide that a payday loan is the best solution to your personal cash flow problem, it is simple as going online to apply for a payday loan, and most of the time you can get a cash advance approval within minutes. One thing to remember is that as the customer, you need to find out all the information before agreeing to the payday loan in Australia.
    All the potential borrower needs to do is fill out the application and provide the proper identification information and they can get a short term loan, with ease. The borrower must be over 18 years of age resident of Australia and have full time employment and an Australian bank account. Payday cash advances do look at credit scores, but a bad score will not be the reason for a turn down since most cash advances companies does not have requirements of a high score.

    There are almost always better ways to go than a payday loan though. Even your local credit union or whatever the equivalent is in Australia could probably provide you with a personal loan with much better terms that won't get you stuck in a never ending unsustainable borrowing cycle. And if your credit is bad enough that your CU can't help it's probably time to consider BK anyway. BTW I didn't know they were legal/existed in Australia. I thought they were a US only thing.

  • Adobe LR5 you suck!!

    My Gradueted Filter stops working, tried everything, clients on hold, this community can't answer my question and I am lost!
    No where, no one to call! Just cashing, zero problem solving.
    Thanks a lot Adobe...

    Hi Gwen,
    Dunno how well this works in Netherlands, but I prefer the chat option m'self:
    Contact Customer Care
    Also, John Beardsworth (or others) may be able to help you here - e.g. maybe it's a graphics driver issue - could that be? Which OS??
    Rob

  • Re Photoshop via the Cloud

    As I understand it, if I subscribe to Photoshop via the cloud for around $20 per month and use it for say two or whatever years then have a cash flow problem and stop paying for a period of time, Adobe not only stops sending updates but they disable Photoshop so that I have nothing to show for years of payments.  Is this really true?

    You are not the only one who feels that way.
    You can post over in the Adobe Creative Cloud forum, to add to the many complaints there.
    http://forums.adobe.com/community/creative_cloud
    You can also add you name to an on-line petition, at change.org (up to about 30,000 displeased Adobe customers now)
    https://www.change.org/petitions/adobe-systems-incorporated-eliminate-the-mandatory-creati ve-cloud-subscription-model

Maybe you are looking for

  • Error in HRPAD31 ( Short dump Analysis )

    Hi friends, When i am changing the existing qualification or adding new qualification it is showing this error in short dump Pls advise me if there is some relationship i am missing in 031 ? here is the description of short dump Runtime Error  DBIF_R

  • Allow editing metadata in develop mode

    My biggest dissatisfaction about Lightroom right now is the distinction between Library and Develop modes or views. I would dearly love to get rid of the "quick develop" panel - perhaps make that something that could be displayed via the application

  • Email Name Confusion - how do I correct it to original setting?

    Hi I have just installed Mavericks on my MacBook Pro and have just noticed that my iCloud email account is wrong - the email address is correct, but it does not display my name correctly - it has changed it to my wife's name. I went into Preferences

  • AIR for IOS, ApplicationDomain problem: Error #2007: Parameter Possible symbol clash in multiple swf

    I am exporting a game for IOS in Flash CS6. I have isolated classes, except a framework for static utilities that do not clash, but I still get this message when exporting for IOS. AIR for desktop, even with ApplicationDomain.currentDomain works and

  • Adding domain objects

    Hello, I'm working with an application where we have many, many, many domain objects that could be added to a "header". In my business/service interface I don't like to write 50+ of addX(...), addY(...), addZ(...) etc. methods. Every domain object ex