Catalyst drivers and 3D games. Help me!

I just saw that Catalyst drivers were updated to support the new Xorg.... nice.
So, I do a yaourt catalyst. All was fine until I rebooted.
Then I saw MineCraft won't run! Odd... it was complaining about LibGL.
Then launched LinCity-NG... same thing.
Hmm...
So I do pacman -Syu and Libgl is for download... but so is ati-drv.
I don't want to run open source drivers since they are too slow.
My issues:
1. How can I tell if I'm running the catalyst drivers?
2. aticonfig can't be found, what's wrong?
3. How do I get Libgl back but not install the open source drivers?

Ignore my first post, I now have more trouble.
fglrx isn't building at all while I removed the ati-dri drivers. I'm now running the VESA drivers.

Similar Messages

Business catalyst, muse and 301 redirects - help!

I have uploaded my muse website to business catalyst, using the free hosting service that adobe gives to CC subscribers.
However, under site manager, it only gives me two option (web forms and emails) and no ability to do url redirects etc.
Can anyone help? I urgently need to set up my 301 redirects

This might help as well :
Go to 'My Details', "Screen shot: http://project02.businesscatalyst.com/Jing/2013-0..." and check the option of 'Enable online content editing', "Screen shot: http://project02.businesscatalyst.com/Jing/2013-0..."

Catalyst CCC and Chipset Drivers Collision

Hello All,
My CCC (catalyst control centre) wont load and I think its the chipset drivers and i cannot find the chipset drivers (amd 970 chipset and SB950).
The sequence of events unfolded as follows....
1) I downloaded ati chipset drivers (http://eu.msi.com/service/download/driver-2592.html) and installed them...
*This is the cause of everything?
*Because the drivers are NOT not 900 series chipset or mainboard?
As a consequence of this it kicked the Realtek LAN drivers out...
(something to do with hdmi audio drivers for the hdmi on the graphic card)
2) I reinstalled the realtek drivers
*As a consequence of this it kicked the catalyst ccc drivers out
3) I have tried 12 gazillion times to re-install the catalyst drivers and all attempts fail
I have removed the graphic drivers and reinstalled them again but the driver fails to install
I have tried the amd detection utility and that fails
I have tried the sapphire website ccc utility (12.2 and 12.1 and 11.2) and that fails
The reason for this I suspect is....
Because the chipset drivers are screwed up?
My system is :
mainboard-
MSI 970A-G45
graphic card-
ATI Radeon Sapphire HD6450 1Gb DDR3 (1xvga, 1xhdmi, 1xdvi)
memory-
Mushkin 8Gb Blackline
processor-
AMD FX4100
bios-
1.5
os-
windows vista 32bit sp2
I would assume that the correct route is to use an uninstall.inf to remove the chipset drivers?
if so...
where do i get the uninstall.inf?
if not...
where do i get the ORIGINAL or GENERIC AMD Chipset drivers for the 970a and sb950 chipset?
I dont want to re-install windows,
nor do i want to roll the system back.
Help anyone please?

Quote from: Panther57 on 27-March-12, 11:35:50
For some reason you link directed to 'Europe' MSI website? Unless you are in Europe.. visiting the USA North America site.. the link Wonkanoby listed is the US MSI download page for your board.
You didn't list the model number to your Mushkin memory.. are they compatible? The sound you are having trouble with... through your GPU or on-board plug in? If on the VideoCard through the HDMI.. dod you go into Control Panel/Sound, and make the selection for the correct 'Default'?
Hiya Panther57,
The Mushkin memory is BLACKLINE model 4x2gb
The graphic card is is in the first pcie slot (nearest cpu)
the audio is onboard Realtek 7.1
I have tried the AMD Autodetect and it takes about 20-30 minutes to install the ctalyst control centre which has FAILED on the last 12 or attempts,
I've benn having this problem for about thelast 10 days and try to address it towards the middle of the day most days by downlloading one or another driver....
I tried to reinstall from the cd but it fails and inside the CCC install package some options (the ones which matter in this case) are not selectable they are already checked and read as follows...
Your xxxxxxxxxxxx driver files re update/latest version and do not need updating.
Which I assume means it wont install those files.
Just a thought...
Wonder if its worth writing to the CCC team directly?
Thanks for any and all help.

How can I safely and painlessly downgrade catalyst drivers?

The latest version of catalyst is 11.8 and is horrible for me. For example, the computer screen does not turn on after going to sleep (a problem I had with 11.4 as well), when running applications from Terminal I'm constantly getting X errors, and now the latest is that I can't make boxee compile at all, complaining about missing lGL (I've googled around and people suggest reinstalling catalyst or installing mesa).
Disclaimer: I need catalyst drivers and not FOSS ones because of my hardware.
So the question is how would I go about downgrading from 11.8 to 11.7 as painlessly as possible?

Yes and I know how to generally downgrade packages, but catalyst is specific in that it's from AUR, it has many scripts attached to it, there is a kernel module, and my past experiences with trying to downgrade it resulted in a screwed up system (following the wiki)

Catalyst Drivers - No mouse in 3D games!

Hello all! Didn't see a post about this that was even somewhat recent, so I'll ask. If it's been brought up and I didn't see, feel free to gripe at me.
In any case, I'm using catalyst-utils and catalyst-dkms from the repos with my AMD A6-3650 APU. With these drivers, graphics are fine, but I have no mouse in 3D games (Such as OpenArena, UrbanTerror, Unvanquished, etc) with only one known exception, Red Eclipse (no idea why that works but the rest don't...). Tweaking in-game cvars has no effect. The mouse is technically seen - when I'm in an arena I can move the mouse and the screen jitters around (as if it's trying to turn 180-ish degrees on every mouse input) but it's certainly not "working". Menus are broken as well, as the mouse doesn't even show up there.
2D games are fine (Wesnoth, etc.) so it seems to be an issue with just 3D. I don't have these issues on the F/OSS drivers, nor with fglrx on Gentoo, so this is a bit odd. Thanks to anyone who can help!
Useful package versions:
local/sdl 1.2.15-3
local/catalylst-dkms 12.9-1
local/catalyst-utils 12.9-0.1
local/linux-ck-kx 3.6.2-1
My xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" LeftOf "aticonfig-Screen[0]-0"
EndSection
Section "Module"
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:0:1:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Maybe you need some settings like
SDL_VIDEO_FULLSCREEN_HEAD=1 SDL_VIDEO_X11_DGAMOUSE=0 /usr/bin/quake3
https://bbs.archlinux.org/viewtopic.php … 24#p388824
Last edited by karol (2010-10-12 10:20:51)

[SOLVED]Are X11 and AMD catalyst drivers friends again?

last time i installed linux on my laptop X11 had dropped support fro amd catalyst drivers (proprietary video card drivers), did amd do something about it? did X11 team reconsider? can i use the catalyst drivers on X11 again now? my laptop and it's stupid APU or "dual graphics" aren't playing so nice with the open source radeon drivers.
Last edited by rabcor (2013-06-20 19:16:00)

If wine supported skype, i would be more dead set on using linux than using the amd proprietary drivers.
The reason this isn't a big deal to me is mostly because i only use this laptop for 3 things, regardless of OS. Teamspeak 3, Skype, Playing Videos.
I have it set up on a dual boot because neither windows nor linux seem to be reliable on this laptop, the reason is hardware-side, this APU is driving me nuts.
The reason i'm having problems with the radeon drivers is that even if i set my computer to disable the "switchable graphics" on boot it sometimes seems to randomly re-enable it without even notifying me. The reason this is bad is because the switchable graphics cause my laptopt to overheat. If this happens in windows it usually just enters hibernation mode while the heat levels are just barely critical, in linux however it keeps running for a while at critical levels before it'll finally just overeat. I'm hoping that the AMD proprietary drivers can help me solve this on the linux side.
Whichever operating system i can manage to make stop ever using the switchable graphics (thus preventing all overheating) will be the one i will use in the end, but i'm not in any big rush, windows is working decently for me on the laptop right now, and i can patiently wait for the amd proprietary drivers to support X again, since i don't interact much with the computer at all anyways. Using linux would mostly just be to make the laptop look better. Linux seems to be the more likely one to succeed with this task in the end however (because i can optimize/customize it a whole lot more than i ever could windows, and because i'm scared of updating the catalyst drivers in windows because my laptop has often just completely broken upon catalyst driver update in windows.)

TS1702 My millionaire and friends game won't load onto my iPad or iPhone 5? It was working in the beginning but now it won't even load. I have restarted my device & deleted and reinstalled the app several times and it still won't load? Please help

Millionaire and friends game not loading! Please help! I have tried restarting the device & deleting the app and trying to reload but nothing works? I also tried to email the creators of the app but the email address for tech support bounced back to me so its obviously not a good email??

I tried to email the developer (Canada) but the email for technical support is not a good email. My email got returned to me undeliverable? Not sure what to do next? I also want to get the game going again cause I made purchases to get more coins to play the game & now I can't even use it? Very frustrating!!!

Downgraded Win8.1 to Win7 and now need help to find drivers

So I didn't like Windows 8.1 and downgraded to Windows 7 64-bit SP1, formatting all the drives in the process. Now I don't have some drivers and I'm not sure which ones to download since there are like 2 indentical types of drivers for everything on the page: http://support.hp.com/us-en/drivers/selfservice/hp-15-g000-notebook-pc-series/6545564/model/7234521
In Device Manager there are 6 things with yellow !s
Ethernet controller
Network controller
PCI Device
PCI Encryption/Decryption Controller
SM Bus controller
Universal Serial Bus (USB) Controller
I'm not sure if I'm meant to provide the Device ID or Hardware IDs so please tell me to provide whichever ones.
And also some additional things that I think are related to drivers
Function buttons dont work so I can't change brightness while holding fn + f2/f3. Is that the HP System Event Utility Driver?
"The current video card may supoprt Aero with a driver that is compliant with the Windows Display Driver Model (WDDM)". Do I just the Graphics drivers on the page I put above? And which one? Or doesn't matter?
Also under System Information > Components > Display, is it meant to be generic llike 'Standard VGA Graphics Adapter" Is that what its meant to be or will they have the specific network adapters after I install some drivers?
Under Components > Modem, there is nothing there
Under Components > Ports > Serial, there is nothing there
Under Components > USB, it says 'Standard Enhanced PCI to USB Host Controller' rather than something more speciifc.
I'm comparing these to my other laptop which has pretty specific things written under those sections so I'm assuming they're to do with the drivers right? I just threw these here in case theres more underlying issues.
Also how would I go about installing these drivers since the USB ports dont work? Putting the drivers on a CD?
I would really appreciate any help provided because without these, my laptop is basically unusable. Thank you so much.
This question was solved.
View Solution.

Hi:
Yes, you can burn the files to a CD and use those to install the drivers you need.
You need to install the AMD Chipset and USB 3 drivers which are not on your notebook's support page.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_117181_1
Download and install both of these drivers for the usb...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=40...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=40...
Reboot after each installation.
PCI E/D Controller: Not on your notebook's support page.
Run this file and then manually install the driver.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1
To manually install the driver, go to the device manager and click on the PCI E/D Controller needing the driver.
Click on the driver tab, click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet Controller:
Realtek Local Area Network (LAN) Driver
File name: sp69625.exe
PCI Device:
Realtek Card Reader Driver
File name: sp69619.exe
I don't know what model wireless card your model uses, so if you still need the wireless card driver (Network Controller), please do the following steps so I can figure that out and then I will post the link to the wireless card driver you need...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

I am having problems being able to sign out of everything that requires a sign in and password can you help and some games only show have the page

I have been doing online banking with this bank for 7 months with no problems. About 2 weeks ago I started having problems with certain things within the account. I called the support team with the bank and told them the problem and they suggested to uninstall firefox and reinstall so I did. Now I can move around within the account but can not sign off. Also all my accounts that require a sign in I have the same problem and some games I play only load up part of the game. I play goldminer and now I can not see the little miner to play the game. Can you help????????

That issue can be caused by corrupted cookies.
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted. 
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy

Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.

Mani Dinesh wrote:
Can somebody help me install IOS 6.1.3 back to my iPhone 4.
Downgrading is not supported by Apple.
Mani Dinesh wrote:
...every app gives a break for 4-5 seconds to open up. ...
See this discussion...
https://discussions.apple.com/message/23731048#23731048

Need help with drag and drop game, Urgent!

Hi I have created a drag and drop game, the drag and drop is
working alright however once the right word has been placed in the
box, and moves on to the next question the previous correct answer
stays where it was placed, how can i get it to snap back to its
original location? Also when the right word is draged in to the the
white box i want it to snap into place in that box so it fits in
there.
Also if you have any other thoughts and advice on how i can
improve on this please email me thanx
Can someone please help, my .fla file can be found here:
http://www.freshlemon.co.uk/timeline.fla
http://www.freshlemon.co.uk/timeline.fla.zip
thanx

tellTarget is ancient
I forget what it even used to do??? hahaha
seriously, just put in the instance name and what you want it
to do:
tellTarget("movieclip"){
play();
is now just
movieclip.play();

Radeon HD 7970 Graphics Drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion

Need graphics drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion (to support Radeon HD 7970 Graphics cards)
Operating System
-64-bit, OS X 10.8.2
Graphics Cards (all twelve)
XFX Double D Radeon HD 7970 (FX797ATDFC)
XFX Double D Radeon HD 7970 Black Edition (FX797ATDBC)
XFX Double D Radeon HD 7970 GHz Edition (FX797GTDFC) **
Diamond Radeon HD 7970 (7970PE53G)
Diamond Radeon HD 7970 GHz Edition (7970PE53GHZ) **
Diamond Radeon HD 7970 Double Black Diamond Edition (7970PE53GDD)
ASUS Radeon HD 7970 (HD7970-DC2-3GD5)
ASUS Radeon HD 7970 GHz Edition (MATRIX-HD7970-P-3GD5)
SAPPHIRE Vapor-X Radeon HD 7970 GHz Edition (100351VXSR)
SAPPHIRE Radeon HD 7970 (100351SR)
GIGABYTE Radeon HD 7970 (GV-R797OC-3GD)
MSI Radeon HD 7970 (R7970)
Please also add graphics and hardware acceleration for H.264/H.265, and OpenCL

Love these year old threads.
Flashing is what some other sites specialize in, or even troubleshooting non-Apple cards.
There is an AMD Mac Edition 7950. Now. As well as EVGA GTX 680.
All of those were tested and reported on by Barefeats - back in March-May 2013.
Apple? not interested in PC cards other than they have quietly added more driver support in 10.8.3 and especially above. Not in 10.8.2.
Be interesting to see what Maverick support provides as far as GPUs.
And netkas and others are up on PC graphic cards, not Apple, even if they don't write drivers, they do often write how to flash a PC card and support. Apple and this discussion, no.

Need help when swapping rooms in my point and click game

Ok i am making my first point and click game in flash to familiarize myself with some of the basics.
I have set up a room with a 2 walls(rooms) at the moment, and on the first frame there are 4 screws that when clicked play a small animation and are then removed, works fine so far. But if i leave that room then go back into it the screws are back in their original position. How do i stop this from happening, i am guessing i have to put an if formula somewhere on my addChild(TLscrew) or put it somewhere else besides in the enter_frame function. Anyway heres my code any help would be appreciated.
import flash.events.MouseEvent;
import flash.events.Event;
import flash.display.MovieClip;
stop();
myWords.addEventListener(MouseEvent.CLICK, cleartext);
doorHandle.addEventListener(MouseEvent.CLICK, losehandle);
doorBit.addEventListener(MouseEvent.CLICK, turnDoorBit);
tele.addEventListener(MouseEvent.CLICK, turnOnTele);
skyremote.addEventListener(MouseEvent.CLICK, gotoRemoteBack);
addEventListener(Event.ENTER_FRAME, loop);
var TLScrew:MovieClip = new screw();
var TRScrew:MovieClip = new screw();
var BLScrew:MovieClip = new screw();
var BRScrew:MovieClip = new screw();
var topBattery:MovieClip = new AABattery();
var bottomBattery:MovieClip = new AABattery();
var remoteHand:MovieClip = new Hand();
var TLout:Boolean = false;
var TRout:Boolean = false;
var BLout:Boolean = false;
var BRout:Boolean = false;
var doorBitStraight:Boolean = true;
var teleSwitchedOn:Boolean = false;
var beenToOtherRoom:Boolean = false;
TLScrew.addEventListener(MouseEvent.CLICK, screwout1);
TRScrew.addEventListener(MouseEvent.CLICK, screwout2);
BLScrew.addEventListener(MouseEvent.CLICK, screwout3);
BRScrew.addEventListener(MouseEvent.CLICK, screwout4);
function loop(e:Event):void{
tele.buttonMode = true;
TLScrew.buttonMode = true;
TRScrew.buttonMode = true;
BLScrew.buttonMode = true;
BRScrew.buttonMode = true;
doorHandle.buttonMode = true;
addChild(TLScrew);
TLScrew.x = 258;
TLScrew.y = 205.1;
addChild(TRScrew);
TRScrew.x = 268;
TRScrew.y = 205.1;
addChild(BRScrew);
BRScrew.x = 268;
BRScrew.y = 230.35
addChild(BLScrew);
BLScrew.x = 258;
BLScrew.y = 230.35;
if(TLScrew.currentFrame == 24){
removeChild(TLScrew);
if(TRScrew.currentFrame == 24){
removeChild(TRScrew);
if(BLScrew.currentFrame == 24){
removeChild(BLScrew);
if(BRScrew.currentFrame == 24){
removeChild(BRScrew);
function losehandle(e:MouseEvent):void{
myWords.text = "handle fell off";
doorHandle.gotoAndPlay(2);
doorHandle.removeEventListener(MouseEvent.CLICK, losehandle);
function turnDoorBit(e:MouseEvent):void{
if(TLout == true && TRout == true && BLout == true && BRout == true && doorBitStraight == true){
doorBit.rotation = 75;
doorBitStraight = false;
else if(TLout == true && TRout == true && BLout == true && BRout == true && doorBitStraight == false){
doorBit.rotation = 360;
doorBitStraight = true;
function gotoRemoteBack(e:MouseEvent):void{
gotoAndStop(2);
addChild(topBattery);
addChild(bottomBattery);
addChild(remoteHand);
topBattery.x = 174.8;
topBattery.y = 134.75;
bottomBattery.x = 127.8;
bottomBattery.y = 192.8;
bottomBattery.rotation = 180;
remoteHand.x = 360.3;
remoteHand.y = 143.75;
arrowBack.addEventListener(MouseEvent.CLICK, gotoMain);
beenToOtherRoom = true;
function gotoMain(e:MouseEvent):void{
removeChild(topBattery);
removeChild(bottomBattery);
removeChild(remoteHand);
gotoAndStop(1);
function turnOnTele(e:MouseEvent):void{
if(teleSwitchedOn == false){
tele.gotoAndStop(2);
teleSwitchedOn = true;
}else if(teleSwitchedOn == true){
tele.gotoAndStop(1);
teleSwitchedOn = false;
function cleartext(e:MouseEvent):void{
myWords.text = "";
function screwout1(e:MouseEvent):void{
TLScrew.gotoAndPlay(2);
TLout = true;
function screwout2(e:MouseEvent):void{
TRScrew.gotoAndPlay(2);
TRout = true;
function screwout3(e:MouseEvent):void{
BLScrew.gotoAndPlay(2);
BLout = true;
function screwout4(e:MouseEvent):void{
BRScrew.gotoAndPlay(2);
BRout = true;

Here is my new code including the suggestion of taking the false out of my Booleans which has got me a step closer to where i want to be (thanks) but now with this code when i click my TLscrew it plays the movieclip then when it reaches the end of the animation it removes itself(as intended), but none of the other screws are removing themselves when they reach the frame 24 like they are meant to. Any ideas where i have went wrong?
Thanks for the help
import flash.events.MouseEvent;
import flash.events.Event;
import flash.display.MovieClip;
stop();
var topBattery:MovieClip = new AABattery();
var bottomBattery:MovieClip = new AABattery();
var remoteHand:MovieClip = new Hand();
var TLout:Boolean;
var TRout:Boolean;
var BLout:Boolean;
var BRout:Boolean;
var doorBitStraight:Boolean = true;
var teleSwitchedOn:Boolean = false;
var TLScrew:MovieClip = new screw();
var TRScrew:MovieClip = new screw();
var BLScrew:MovieClip = new screw();
var BRScrew:MovieClip = new screw();
myWords.addEventListener(MouseEvent.CLICK, cleartext);
doorHandle.addEventListener(MouseEvent.CLICK, losehandle);
doorBit.addEventListener(MouseEvent.CLICK, turnDoorBit);
tele.addEventListener(MouseEvent.CLICK, turnOnTele);
skyremote.addEventListener(MouseEvent.CLICK, gotoRemoteBack);
addEventListener(Event.ENTER_FRAME, loop);
TLScrew.addEventListener(MouseEvent.CLICK, screwout1);
TRScrew.addEventListener(MouseEvent.CLICK, screwout2);
BLScrew.addEventListener(MouseEvent.CLICK, screwout3);
BRScrew.addEventListener(MouseEvent.CLICK, screwout4);
function loop(e:Event):void{
tele.buttonMode = true;
TLScrew.buttonMode = true;
TRScrew.buttonMode = true;
BLScrew.buttonMode = true;
BRScrew.buttonMode = true;
doorHandle.buttonMode = true;
if(!TLout){
addChild(TLScrew);
TLScrew.x = 258;
TLScrew.y = 205.1;
if(!TRout){
addChild(TRScrew);
TRScrew.x = 268;
TRScrew.y = 205.1;
if(!BRout){
addChild(BRScrew);
BRScrew.x = 268;
BRScrew.y = 230.35
if(!BLout){
addChild(BLScrew);
BLScrew.x = 258;
BLScrew.y = 230.35;
if(TLScrew.currentFrame == 24){
removeChild(TLScrew);
if(TRScrew.currentFrame == 24){
removeChild(TRScrew);
if(BLScrew.currentFrame == 24){
removeChild(BLScrew);
if(BRScrew.currentFrame == 24){
removeChild(BRScrew);
function losehandle(e:MouseEvent):void{
myWords.text = "handle fell off";
doorHandle.gotoAndPlay(2);
doorHandle.removeEventListener(MouseEvent.CLICK, losehandle);
function turnDoorBit(e:MouseEvent):void{
if(TLout == true && TRout == true && BLout == true && BRout == true && doorBitStraight == true){
doorBit.rotation = 75;
doorBitStraight = false;
else if(TLout == true && TRout == true && BLout == true && BRout == true && doorBitStraight == false){
doorBit.rotation = 360;
doorBitStraight = true;
function gotoRemoteBack(e:MouseEvent):void{
gotoAndStop(2);
addChild(topBattery);
addChild(bottomBattery);
addChild(remoteHand);
topBattery.x = 174.8;
topBattery.y = 134.75;
bottomBattery.x = 127.8;
bottomBattery.y = 192.8;
bottomBattery.rotation = 180;
remoteHand.x = 360.3;
remoteHand.y = 143.75;
arrowBack.addEventListener(MouseEvent.CLICK, gotoMain);
beenToOtherRoom = true;
function gotoMain(e:MouseEvent):void{
removeChild(topBattery);
removeChild(bottomBattery);
removeChild(remoteHand);
gotoAndStop(1);
function turnOnTele(e:MouseEvent):void{
if(teleSwitchedOn == false){
tele.gotoAndStop(2);
teleSwitchedOn = true;
}else if(teleSwitchedOn == true){
tele.gotoAndStop(1);
teleSwitchedOn = false;
function cleartext(e:MouseEvent):void{
myWords.text = "";
function screwout1(e:MouseEvent):void{
TLScrew.gotoAndPlay(2);
TLout = true;
TLScrew.removeEventListener(MouseEvent.CLICK, screwout1);
function screwout2(e:MouseEvent):void{
TRScrew.gotoAndPlay(2);
TRout = true;
function screwout3(e:MouseEvent):void{
BLScrew.gotoAndPlay(2);
BLout = true;
function screwout4(e:MouseEvent):void{
BRScrew.gotoAndPlay(2);
BRout = true;

I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
I think the following may help me (In case anyone els is looking):
http://support.apple.com/kb/DL830

HT4407 my MBA is running windows 7 Home, 64 bit but windows is not seeing key hardware, i.e. network&sound. I followed the Apple directions "Installing Windows 7 drivers" and still no joy. Any help would be appreciated.

My MacBookAir is successfully running Windows 7 Home, 64 bit but Windows is not seeing key hardware i.e. network,sound and
camera. I have followed the Apple directions "installing Windows 7 drivers" and Windows is still not seeing hardware. Any Help would
be greatly appreciated.

Yes, I had MBA burn Apple's Window support software to a DVD. In Windows I am getting "Hardware not found" and during another attempt (using windows's update driver) "driver not found".

Catalyst drivers and 3D games. Help me!

Similar Messages

Maybe you are looking for