Catching unix signal in tuxedo 8.1

Hello.
I have a problem catching signal in my tuxedo server.
I try to use timer.h, with the function timer_settime i set the second
to wait....
i use the sigfillset to set the sginals , and wait for a signal using the
function sigwait. i catch the signals SIGINT and SIGQUIT....
if the timer awake in the correct time, the sigwait don´t do nothing , i
think that the signal is lost.
i use the same design in tuxedo 6.4 and work fine, but in tuxedo 8.1 this
not work..
any body have any idea???
thanx
Rodrigo Cañete Molina.

Similar Messages

Is it possible to catch Unix signals globally?

I'm inquiring mostly about signals like EXCBADACCESS, etc?

Thanks. And, no, I'm not trying to recover from it. I'm trying to log it for debugging purposes.
And I forgot to mention - this is for iOS and not for Mac app.
Anyway, I'm still struggling to catch it. Here's where I am so far. Correct me if I'm wrong:
1. I add the code you gave me into the main() function, right?
#include <execinfo.h>
void signal_handler (int signum);
int main(int argc, char *argv[]) {
for (int i = SIGHUP; i <= SIGUSR2; i++){
signal(i, signal_handler);
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
int retVal = UIApplicationMain(argc, argv, nil, nil);
[pool release];
return retVal;
void signal_handler (int signum)
NSLog(@"### Signal caught ####");
2. And then to trigger a memory fault:
int v = strlen((const char*)1);
static int e = 0;
e += v;
In the code above the signal_handler() is never invoked. Instead I get an app crash in the console window only. Any idea why?

I am using I Phone 5 and i am unable to catch the 3G signal on my phone but at the same time my colleague using another i phone 5 can easily catch 3G signal. We are using sim of same operator. If i go out of my office i can catch 3G coverage easily.

I am using I Phone 5 and i am unable to catch the 3G signal on my phone but at the same time my colleague using another i phone 5 can easily catch 3G signal. We are using sim of same operator. If i go out of my office i can catch 3G coverage easily.I am tired of surfing on edge network. I have tried many tricks from changing the mode to airplane mode and then again back to normal mode.

Hey Suvit Sharma,
I would go through the troubleshooting suggestions in this article:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
You're already on the right track with toggling airplane mode, but there are several other steps you can take to resolve the issue.
Best,
Delgadoh

Unix Signal Handling in Oracle Apps

I have a number of questions regarding Signal Handling
on Unix platforms within Oracle client code. I would like
to ensure that my signal handling requirements do not clash with
those of Oracle within an application.
1. Does the Database client code register any Unix signal
handling routines within a user application?
2. If it does, which signals does it handle?
3. What is the scope of these handler routines, i.e. when are
they registered and when do
they become de-registered?
4. When registered, do these handler routines attempt to pass
signals on to previously registered
handlers (i.e. do previously registered handlers get chained)?
5. When they are de-registered do they attempt to re-instate any
previously registered signal handlers?
thank you in advance for your help,
John Tresadern
IBM UK.
null

This can certainly be done, assuming you have sufficient hardware/storage resources.
Each instance will need to have a separate Unix account (e.g. applvis, appldev etc).
The actual details of the cloning process are outlined in MOS Doc 230672.1 (Cloning Oracle Applications Release 11i with Rapid Clone)
HTH
Srini

Catching POSIX signals with labview

Hi,
is there a way to catch POSIX signals with LabVIEW.
Im building a LabVIEW Client (Linux AND Windows) to a non LV Server
(Linux, C). All works fine except the catching of the interrupts sent
by the server. The server sends interupts using POSIX signals. For full
functionality I should be able to catch this signals. How can I do
that?
Thanks for your help
Ulrich

Interesting project!
I looks like a few people have tackled decoding the data (both WWV and WWVB) using reciever modules that create a digital signal stream and Arduinos to decode the data.
How about GPS based time? Here is reciever/decoder module that provides a decoded serial data stream:
http://www.parallax.com/Portals/0/Downloads/docs/prod/acc/GPSManualV1.1.pdf
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Laptop not catching wifi signals

I have a 2011 Mac book Pro with OS x 10.7.1 running on it. Till about a month back it stopped catching wifi signal from my router, and then sometimes it will catch signal from only near the router. I thought that it might only be an issue with my home router. Now in the new city my MBP can't detec any of the wifi networks even in my home or in the office.
Anything I can do before calling the tech support?

Contact AppleCare. The issue is serious enough to contact tech support.
Best.

Can I catch ALRM signal on solaris ?Urgent......

Hi !
Is it possible to catch the ALRM signal on Solaris ?? I heard that trying to catch a signal that will be handled by the JVM will throw an IllegalArgumentException. This is what happening when I try to catch the ALRM signal. I'm getting "java.lang.IllegalArgumentException : UnknownSignal : ALRM". But, in the same application, I'm able to catch INT and TERM signals.Can anyone tell me how to trap the ALRM signal on Solaris ???
Thanks in advance .
Ramesh Thota

No ! I did not use any native code. I've used the classes sun.misc.Signal and sun.misc.SignalHandler for this. Here is my code :
import sun.misc.Signal;
import sun.misc.SignalHandler;
public class test implements Runnable
public static boolean signalFlag = false;
public static Object valueLock = new Object();
public static void main(String args[])
test t = new test();
Thread thread = new Thread(t);
thread.start();
String SIG_TERM = "TERM";
String SIG_INT = "INT";
String SIG_ALRM = "ALRM";
SignalHandler sigHdl = new SignalHandler ()
     public void handle( Signal aSignal )
     synchronized(valueLock)
          signalFlag = true;
          System.out.println( "Caught " + aSignal.toString()+ " signal.");
          System.out.println(signalFlag);
          valueLock.notify();
     } // End of Sync Block
} // End of method handle
}; //end of class
// Installing signal handlers
Signal.handle( new Signal( SIG_INT ), sigHdl );
Signal.handle( new Signal( SIG_TERM ), sigHdl );
Signal.handle( new Signal( SIG_ALRM ), sigHdl );
} // End of Main
public void run()
try{
     synchronized(valueLock)
     while(signalFlag != true)
     valueLock.wait();
} // end of try
catch(InterruptedException iox)
     System.out.println("Interrupted");
} // End of Run
}// End of Class

How to catch ACK signal by using LabVIEW?

Hi everyone,
I use 8451 to read/write and follow I2C protocol. Now, I want to catch the ACK signal. Does anyone knows how I should do by using LabVIEW?
Thanks.
Best Regards,
Catherine

Duplicate post.
Regards
JamesC
NIUK and Ireland

Software that catch record signal to re-route?

I'm looking for a prog that could capture the record-signal and route it to line-out (as this could solve my problem of only being able to record my SPDIF-in on Soundblaster MP3+)
anyone know of such a prog?

Cubase

My iphone 4 is not able to catch wifi signal since few days

I tried to connect my iphone with my wifi many times. Username and password are correct but also it does not connect. can someone help me to solve this problem? the bluetooth also not working.

No, still didnt work. I have to be like within a 10 metre range of ANY router in order for it to pick up Wi Fi. My network has replaced my phone though

Ever since updating to ios6, my iPhone 4 has weak to no wifi signal and iMessage will not work, MMS stopped working, and I don't get my social network notifications on wifi unless I'm close tithe router or I catch a good signal from it.

The update has completely screwed up my 4.. No more iMessage over WiFi, I have to hold my phone in the air sometimes to catch a signal and I never had to do that before, and after the update I can't send any pictures, over iMessage or 3G .. And with the weak signal I only get my notifications from apps when it wants to.. I'll be connected to wifi and using it, but won't get any notifications, or when I do.. Its whenever the signal has registered or my phone has authenticated it, I've had these problems since last year with no fix, I've reset my router countless times, I'm on Verizon and NEVER had wifi or imessage issues before ios6 .

Make Genius Appointment and take your iPhone to the Apple Store. Only Genius can make these determinations. The broken screen voids your Warranty. The Genius could overlook this, you never know. Take your iPhone to Apple Store, hope for the best, but be prepared to pay $149 for Out of Warranty Replacement iPhone 4. A good price for replacement of an iPhone 4 with broken screen and WiFi problems.

Signal catching in Solaris

I tried to catch unique signal(SIGCHLD) from child processes.
A problem is that parent should catch SIGCHLD signals from multiple children simultaneously.
In Solaris 5.5 and 5.8, some of SIGCHLD signals disapear.
But there is no zombie process.
I think while a process catches one signal if the process gets same kind of signal, it blocks that signal in a queue.
But in the real situation, kernel couldn't block same kind of signal.
Plz, let me know why signals disapear.
And how can I do catch all of them.
FYI,
I used sigaction function.
Below, simple test program.
#include <stdio.h>
#include <sys/wait.h>
#include <signal.h>
#include <stdlib.h>
#include <unistd.h>
void child_do();
void usr1_handle(int);
void chld_handle(int);
int main()
int i;
int pid;
struct sigaction chld_act, usr1_act;
printf("sigaction error\n");
exit(1);
for(i=0; i<5; i++)
printf("%d : child create.\n",i+1);
pid = fork();
if (pid == 0)
child_do();
sleep(5);
kill(0, SIGUSR1);
while(1);
return 0;
void child_do()
pause();
void usr1_handle(int signo)
if (getpid()==getpgrp())
return;
printf("receive SIGUSR1\n");
exit(0);
void chld_handle(int signo)
int childPid, childStatus;
childPid = wait(&childStatus);
printf("%d : Child was killed!\n",childPid);

Hope it gives you some clue:
http://docs.sun.com/app/docs/doc/816-5137/6mba5vpju?a=view#gen-10856

IPhone 4 does not catch signals after upgrading to iOS 7

I am a iPhone 4 user. It does not catch proper signal strength in home after upgrading to iOS 7 whereas it does catch it on the outside. It worked perfectly with previous iOS versions. Please help me out.

Does anyone have any solution???
Reply ASAP...
My iPhone has turned into an iPod since l upgraded...

Cant catch Exception

Hi,
Can anybody tell me why following program doesn't catch exception because of dereferencing a null pointer. Is there anything extra I have to do achieve it.
#include <stdexcept>
#include <exception>
int main ()
try
     int *ptr ;
     ptr = NULL;
     printf("%d" , *ptr);
catch ( ... )
     printf("Exception catched\n");
Thanks,

This program is not throwing an exception. There is difference between UNIX signals (like NULL deref) and C++ exceptions.

Signal losses after restoring. Why?

Hello,
I currently have a problem with my iPhone5c’s signal, bought from September last year. It suddenly started a few days ago.
My signal on the phone keeps on failing. It keeps on saying “Searching…” and it sometimes catches the signal and would say “EE 4G”. However, instantly afterwards, it switches back to “Searching”. This repetition happens continuously and not only unable to connect 3G, but I cannot even make a call or a text to people.
Also, when I try to go to “Settings” and to “Mobile”, it refuses to open and goes back to the main page.
When I erase all the content of my iPhone and start it up as a new phone, the problem seems to get sorted. The phone will get its signal back. Nevertheless, when I try to restore the data from iTunes to the phone, the problem also comes back. No matter how many times I tried, the result seemed to be the same. (I have tried it 4 or 5 times). From this, I believe the problem is not on the iPhone’s hardware, but in the software.
I have taken my phone to the Apple Geniuses counter, but they told me the problem should be on the software and if restoring brings the problem back, it is best to set up the phone as a new phone as finding one part that is causing a problem will be difficult. I have tried it myself, but the problem remained the same even when I deleted all the apps and the photos and refreshed it. I have even updated all the apps and the iPhone’s software into IOS7.1, but it did not help.
Does anyone have any idea of fixing the problem without losing all the photos, apps, music data that currently sits on the phone?
As I am out of ideas I would appreciate for any ideas or tips.
Thank you for reading such a long statement.

Import all your pictures, sync your contacts, music and apps can be reloaded. You have no choice; if you want the phone to work right, you're going to have to restore it as a new device.

Catching unix signal in tuxedo 8.1

Similar Messages

Maybe you are looking for