CATSDB and Payroll Hours Reconciliation

Hello,
The problem is this: Given a date range from the selection screen, get the hours worked (catshours) from CATSDB and then match it up from the payroll hours (ANZHL) from RT to see if there is any discrepancy.
To solve this problem, I am reading the RGDIR and looping where PAYDT is between pn-begda and pn-endda and strza eq 'A' (active) and void ne 'V'. Then getting the sequence numbers in an internal table and calling the RT table for all the sequence numbers. Finally adding the ANZHL based on LGART.
From CATSDB side, select catshours where pernr eq pernr-pernr, workdate between pn-begda and pn-endda, status eq (from select options), awart eq (from select options) into an itab. Then adding up the catshours in the itab.
The problem is the data is not matching up..is it because the dates (pn-begda pn-endda and payroll periods are not matching up?) what is wrong?
I will reward points immediately..
Thanks

Thanks Manu...I appreciate it. Actually I realized that I was counting the hours multiple times for the same For Period because of the Off-Cycle Payments/Additional Payments etc. I will use "PAYTY EQ ' '" to exlclude the additional runs/off cycles etc. Lets see if it works..

Similar Messages

Payroll hours and days in Leave type

Dear expert,
Could you show me how to configure/maintain to able display Payroll hours and days in a leave type?
Thanks,
Mel

Hi Mel
You can use PT_ABS_ATT_COUNTRY BAdI ( Free Determination of Payroll Hours and Payroll Days).
If your query is resolved request you to close teh thread or else feel free to touch base
Thanks and Regards
Anil

Issue:Link between Overt time and Payroll

What is the linkup between the overtime&payroll?
Regards,
chikky.
Please use proper Texts for the queries
Edited by: Sikindar on Jul 19, 2011 4:29 PM

Time and Payroll Gets integrated through Sub Schema XT00
OT can be paid with the help of Time evaluation by Passing no of hours from TE to Payroll and valuating them in Payroll
or else in case of No time Evaluation you can Process the overtime thorught IT2010 and process in the payroll
so wht exactly are you looking at for

OTL with Projects and Payroll Integration - Actual Costing

How does the costing work when we have the OTL integrated with Projects and Payroll? (R12.2.4 functionality - Actual Costing)

As explosion process is based on elements, it only applies to payroll. You can use this functionality with Projects and Payroll Timecard Layout, but project will get the non exploded hours.
--Shiv

Get employees salary and worked hours history

Hi guys,
I am currently trying to model a control that we would like to implement. In short, we would like to check whether in the past, employees that worked less than a given amount of time per month (say X hours a month) did not receive any salary for that month.
I struggle to find the appropriate reports that would allow me to do this.
I saw that the report RPLEHSU0 can display the salary history, but I'm not sure whether this corresponds to the actual monthly wage of each employee.
Could someome highlight what specific SAP reports would provide me these information?
Thank you.
Regards,
François.

I think what you need is the data from payroll results. That is only way you can determine if employee has been "paid". IT8 may have a dollar amount but this does not mean employee got paid. Are you using time evaluation and payroll..? You can develop a custom report...to read payroll results...you have to read actual hours worked...and compare with target...and then see if employee has any payment for the corresponding payroll period (s).
I don't know if there is a one single standard report for this. You can get this in individual reports - get actual hours worked you can use PT_BAL00 which gives the hours worked provided your time evaluation is generating time types/time wage types for hours worked. You can use payroll wage type reporter to get the payment information for a given payroll period...you still have to combine these two to get your final report.

Payroll parallel reconciliation with external non-SAP System

Hi folks,
     Did any one of you work on "payroll parallel reconciliation project . We have data coming through SAP "payroll" results as well as from an external system. We have some wage types, schemas and some results tables in SAP payroll out put, they also have something like wage types and payroll results in external system. What Im thinking that we can download the payroll result and write some macros in excel sheet or do Vlookup. Other approach is to upload external system data in to Sap and validate , or check what every condition are there .
What else can we do? Please give your inputs/suggestions.
Thanks
Message was edited by: Saquib Khan

Hi saquib,
1. I suppose, apart from compareison of
   sap figures <-------> external software figures,
   , there is no other motive / purpose.
2. There are 2 important things :
   a) No need to validate thru macro
      or paralllel online comparison.
     (don't go for such approach, as it may
      hinder sap normal business process)
   b) after payroll is processed in both systems,
      only after that,
      comparison should be done.
3. Now the question comes, where should the
   validation be done ?
   a) sap
   b) external software
   c) excel
   d) others.
4. Doing in excel and checking each figure
   can be done, provided we know how to do
   and we are expert at it.
5. Other thing is,
   a) make y table for uploading data of external system
    (simple y table with wage type, amount, period.
b) make a small z program to upload
    the data,
    do the comparison, one by one.
c) if required, the program can list
    out the variances.
6. I personally feel, this shold be the
    best approach.
   (This comparison program can be developed
    in external software also.
   However, to download sap data
   we once again have to create a small z program.,
so why not, make one z program, once and for all )
regards,
amit m.

Time and Payroll aspects in PA & OM modules implementation

Hi all,
We are implementing PA & OM modules in HR. Time Management and Payroll is not in the scope of the project.
I need to know what aspects of Time and Payroll to be configured for PA & OM implementation. The client has hourly and salaried employees. The hourly employees submit their time sheet (excel) to their managers and then it is forwarded to Payroll (Ceridian). The LOA records are also forwarded to Payroll. So the time, absences and pay are not tracked by HR department. All time and pay details are maintained in HR legacy system, but not processed by HR. In this scenario, what aspects of Time Mgmt and Payroll to be configured? Is there a need to maintain IT0007?
How to set up Payscale Type, Payscale Area, Payscale Group and Level?
Please guide.
Thanks.

Hi,
Do you have plan to maintain It0007 (Planned working time) and IT0008 (Basic pay) as part of PA means do you need to maintain working time and basic pay info for ell employee in SAP system? Ifyes, then you need to configure below steps for IT0007 & IT0008.
For IT0007:-
a) Configure public Holiday and Holiday calendar
b) Define grouping PSA for work schedule
c) Define grouping PSA for daily work schedule
d) Define break
e) Define daily work schedule
f) Define period work schedule
g) Defind ESG for work schedule
h) Set work schedule rules
i) Generate work schedule and assign to employee in IT0007.
Path:- SPRO > PM > Time management >
work schedule (You will get all nodes under that)
For IT0008
a) Configure wage type
b) Define ESG grouping for PCR and CAP
c) Define pay scale type (Path:- SPRO > PM > PA > Payroll data > Basic pay > Define pay scale type)
d) Define pay scale area ((Path:- SPRO > PM > PA > Payroll data > Basic pay > Define pay scale area)
e) Define pay scale group & level (Path:- SPRO > PM > PA > Payorll data > Basic pay > Define pay scale group & level or SM30 >T510)
Then you can maintain IT0008 info for employee.
Regards,
Purnima

Payroll Hours

Hi all,
Any one pl. let me know "How can we calculate the Payroll hours per month" This is related to US Payroll. Is it through IT: 0007?
Regards,
Sushma

how are you calculating the hours ?
time evaluation ??
then i think to look at the hours generated and posted to payroll you can look at th e pt_bal00 report
Thanks
KP

Questions on AP and PO Accrual Reconciliation?

Dear all,
I know the purpose of "The AP and PO Accrual Reconciliation Report" provides a transactional breakdown of each accrual account with a net balance not equal to zero in a summarized or full transaction details version.
However, I found out that on of the Purchase Order has been done the PO receipt and created an invoice in AP (validate and accounted). But the report still showing PO is 0 and AP is 343,000 in AP and PO Accrual Reconciliation report. I am just wondering what I have done wrong suppose the PO and AP should be equal in that case.
Please advice.
Thanks.

Is there any miscellaneous transactions recorded in error to your accrual accounts,These miscellaneous transactions or transactions unrelated to purchase order receipts may be from Payables.

I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

Sorry didn't know that the first step was just supposed to be "subject".
So here it is again.
"I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that." I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
[email protected]

Hi Sonia,
While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
You can download CS4 from here:
Download CS4 products

Accounts Payable and PO Accrual Reconciliation Summary Report?

Dear all,
We are using R12.1.3 and doing the reconciliation AP Vs PO Accrual. However, I run the report "Accounts Payable and PO Accrual Reconciliation Summary Report" and found that one record is strange, like the PO Accrual balance is something -10,000 and the Account Payable balanced is 0.00.
What does it mean for my case? Please advice.
Thanks in advance.

Dear all,
I rerun " Accrual Reconciliation Load Run" program with data range. After that I re-run "Accounts Payable and PO Accrual Reconciliation Summary Report" and found that everything is fine now.
I just wondering am I need to run "Accrual Reconciliation Load Run" every month end closing or just run once for up-grade POs?
Please advice.
Thanks.

R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

Hi,
Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Training, Time and Payroll Integration

Hi
We are currently implementing SAP HCM in ECC 6.00 SP60
Could you please clarify the following queries:
1. How can i pay Internal Instructor / Trainer for few Business Events through Payroll.
When i create a internal trainer for a Business Event, automatically attendance type gets recorded in IT2002 based on below mentioned configuration, unfortunately for all business events only one attendance type for instructor and attendee gets recorded in IT2002
SEMIN AINST 0001 Attendance type for instructor in T554S
SEMIN APART 0002 Attendance Type for Attendance in T554S
But is there any way where i can send different attendance types for different Business Events for a instructor /Trainer? So that in payroll i can query on the attendance type in IT2002 and pay him depending upon the attendance type.
Else
Is there any other way where i can pay the internal trainer automatically from TEM to Payroll?
Regards
Srinivasa Naidu

Hi Marry,
please check this document by Woody
Integrating Negative Time and Payroll
some usefull links and information regarding the configuration
integration between Time and Payroll
Best Regards.

Interfaces in Benefits and Payroll

Hi Everyone,
Can anyone send me some documents or can explain me interfaces in Benefits and payroll?

Sikinder thanks for that. But the problem is i want to know what are interfaces and what interface swe use in benefits and payroll.
I am perfect with configuration part. Could you please help me out with that?

CATSDB and Payroll Hours Reconciliation

Similar Messages

Maybe you are looking for