CBS HD Broadcast switching between HD/SD

I'm in Portland OR and last night I noticed that CBS was switching back and forth from HD to SD during the tv broadcast. This was happening with both the local and national programming. All the comercials seemed to be in HD. It was just the shows that were switching. I have seen it do this before and was curious if anyone else was experiencing the same thing?
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!"

Sounds like a problem with your local CBS affiliate. I have had similar issues with my local FOX affiliate - particularly when they are insering things like breaking news or weather scrolls. It can also happen if the local affiliate is having problems with their reception of the network HS feed.
Not a FiOS issue.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

Automatic switch between 720p and 1080i

I just got FiOS installed today and as I was going through the menu, I noticed that for the video resolution, you are forced to pick a format. Is there a way to set it up so that the STB automatically picks the resolution that the broadcaster has chosen? I don't want to watch everything in 1080i or 720p. I'd like to watch it as the channel has chosen to send the signal
Solved!
Go to Solution.

Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Can I have two or more JVMs in one mashin and switch between them?

Hi all,
I want to have two JVMs in one mashin and switch between them via a httpListener. If I can, could you please guide me to do it?
Thanks in advance,
Orod Semsarzadeh

may be my question is not fully clear. I mean, I want to have an bottun in my JSP when I click on it, 1 thread will be created and work in another JVM.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

How can I switch between apps without going to home screen?

Is there anyway to switch between apps with one tap? (ie. without going to home screen first). Kind of like a command-tab feature.
Steve

Well, you can have one app that you can get to with a double push of the home button (set in settings which you want), but I think it's only your contacts list, or your ipod app. Still useful though.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

How to make my application programmatically switch between English and Russian

Greetings from Colorado...
My application needs to be switchable between English and Russian. Future languages to add are Spanish and Chinese. The user selects a language
from a control before starting the program and then the program changes the Captions, Boolean Texts, Graph Labels, and Enum Type Strings to the
chosen language. For Russian, this requires a different set of characters. I have made substantial progress by:
Control Panels>Region and Language>Keyboards and Languages>Change Keyboards added Russian>Keyboard>Russian on my development
computer.
In the LabVIEW.ini file, I added UseUnicode=TRUE (thanks to a suggestion found in this forum)
Made property nodes for controls and used properties such as Interpret As Unicode (True for Russian, False for English), Text, Font Name, Font Size, etc.
I have used fonts Arial and Arial CYR for Russian and MS Sans Serif for English
Set the keyboard for Russian and enter Cyrillic characters into text constants that are set for Arial or Arial CYR font. Sometimes one works and
sometimes the other works. As long as I set the font name in the property node the same way the text went into the text constant, it generally
works. I wish I could understand why one works sometimes and the other works other times!
I have had trouble with the Boolean Text going off-center when changing fonts and languages and it seems that by setting the Lock Text In Center
property to False and then True again, it seems to work. Often changing Boolean texts between short and long texts causes some of the long text
to be non-displayed; I have remedied this by explicitly setting the width of the Boolean text in a property node.
Often, the Russian text appears as gibberish with strange right-angle characters, :s, =s, and tiny numbers. I have been able to remedy this on my
development computer by ensuring that the text constant on the block diagram has the same size as the caption is supposed to have. This
is not necessary for normal programming in English, but it seems to help here. But it doesn't always solve the problem.
Sometimes the English text appears as Chinese gibberish in an Enum Type selection list or in a graph label. On my development computer,
it seems that making the text the last property to change helps here.
By changing the sequences of assignments to a single property node with a long list of properties, I have been able to make some of these
controls to switch between languages without gibberish showing up.
A few hours ago, I had the Russian strings in the Enum Type control working, except that when selecting from the available items, only the first
word of the Russian string was displayed. Two of the items start with the same word, so the user can't distinguish them.
At that time the English strings were appearing as Chinese gibberish while the list during the selection process displayed in English. As soon
as I changed the selection, future attempts to change the selection gave Chinese gibberish during the selection process, too. But this was only
a problem in the executable version; the source-code version worked fine.
In an attempt to get rid of the Chinese gibberish, I made new constants and retyped the items into them. This worked! But then, the Russian
stopped working and gave gibberish angles and tiny numbers, even though I didn't touch any of the code that sets the properties in Russian mode.
After trying a few sequences of setting the properties for the graph X label on page 2 of my tab control, this label started working correctly for both
languages. But the text of that label comes through on page 1 of the tab control, partly obscured by other controls on that page. After the
program runs a few more seconds, these shadows disappear.
Most times I restart LabVIEW, I get an error message saying there was a crash due to fontmgr.cpp, line 7494. But there actually wasn't a crash.
My computer has Windows 7 64-bit. Deployment Computer has Windows 7 32-bit. LabVIEW version is 8.5.
I have probably 50 or 100 more controls and indicators to change to language programmability and figuring out all this stuff for each one is
terribly time-consuming and there is no assurance that all of them will ever work.
At this point, I'm hoping that I am on an entirely wrong path and someone will send me a clue to get me on a path that is more predictable.
Thanks in advance to all who post ideas!
Cheers
Halden

Hi All,
I've made a lot of progress on this translation, but it's been really hard. There are lots of weird things going on that must be logical because they're in a computer, but I can't figure out what the logic is. When changing a font on a caption using the front panel, it sometimes changes the font on the caption and sometimes doesn't although the indicator always indicates the new font. Removing the first character of the unicode font string being sent to the caption seems to help...huh? Anyway, tabs still can't change language programmatically, and niether can ring controls (some kinds will take the new list of strings, but when selecting, they only display the first word of the string!). Boolean text can be reprogrammed, but only if the boolean text is set to be the same for both true and false states. When reprogramming captions on a non-displayed page of a multi-page tab-controlled user interface, the new text appears on the current page until I change pages back and forth. What a pain!
Sooo, NI....does LabVIEW 2011 have support for unicode fonts? Or, is there anything else in the new control style that will support programmatic language changing?
Halden

How do I stop Firefox mobile from having to restart when switching between apps?

When I'm switching between apps, firefox takes 10 seconds to load up again. Why isn't it already loaded since I just had it up? The Opera browser doesn't do that.

Android automatically closes apps in the background when it needs more memory. To let Firefox run in the background longer, we will need to reduce its memory usage. We are continuing to work on this with each new version of Firefox.

When frequently switching between mobile and desktop view

When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

You can use CTRL+# to switch between Code and Design View.
By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

IWork Apps Closing When Switching Between Open Applications

I am having an issue with iWork applications shutting down when I am switching between open applications. For example, if I have Pages running, but no document open, and I use the command/tab command to switch to another program, then try to go back to Pages, I find that it has closed and must be reopened. The same thing happens with Keynote. If however, the program is open and a document or presentation is open, I can switch without the program closing. Is anyone else experiencing this? I can't find any other references to it. I am running a Macbook Pro with the latest version of Yosemite and the newest versions of Pages and Keynote.
Thanks.

Yokay, so no one else is experiencing this issue. Pretend you were, do any possible solutions come to mind?

How to change Switch between open documents keyboard shortcut (default Control + Tab or Cmd + ~)

I use Control + Tab and Control + Shift + Tab or Cmd + ~ and Cmd + Shift + ~ to switch between tab back and forth alot how do I change the shortcut to something else?
On Photoshop CC 2014 mac

No, there isn't. you can't even set your own shor cut keys as you don't know what the documents will be named. Normally you can add short cuts keys but only for those menus options that already exist but your documents will change. I have searched for the answer earlier as I also want it.
There is in the Pages Help menu an option for Keyboard shorcuts but nothing is mentioned ther about changing document windows.

Double-tapping to switch between or clear running apps is not working with iPhone 4s.

when I double tap to close out or switch between running functions, it does nothing ever since yesterday. I have the most current update since last week and the home button works for all other purposes so it's not broken. Now my battery is draining because I cannot shut off running apps. Please help!

Hi Kate,
Welcome to Apple Support Communities.
It sounds like you’re running into a multitasking issue that’s preventing you from switching between apps or forcing them to quit. Try restarting your iPhone, as shown in the article linked below.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, you can always try restoring the iPhone to factory settings too.
Use iTunes to restore your iOS device to factory settings - Apple Support
Cheers,
-Jason

How to quickly switch between straight and curly quotes?

I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
Now I'm looking for a way to do this -- or something like it -- with Pages.
I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
Can Automator do something like this? Or is there another way?
-- Eric

Turn off the auto correction and you can type Curly quotes with:
left single ‘ option ]
right single ’ option shift ]
left double “ option [
right double ” option shift [
If you want the French quotes « and » they are option and option shift |
Peter

Major delay when switching between folders in Mail

More often than not when I switch between folders (inbox-to-trash or junk-to-inbox, etc) none of the messages in that folder show up and it says on top "0 messages".
Sometimes they come back after 5 or 6 seconds. Other times it takes over a minute. There usually aren't that many messages in either the folder I'm coming from or going to.
Any thoughts?

Based on the tons of new messages showed up in the Trash, I suggest the following.
Quit Mail first and using the Finder go to Home > Library > Mail.
Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Mail > Envelope Index.
Delete the Envelope Index file and empty the Trash.
The Envelope Index file stores an index of all mailboxes and messages.
Launch Mail and you will be prompted to import mailboxes. Select OK and allow the process to complete. This isn't really importing anything but creating a new Envelope Index file within the Mail folder and re-indexing all mailboxes and messages within.
This may cause more previously deleted messages to re-appear but this should resolve the delay problem.
After confirming all mailboxes are available and there is nothing unusual, you can delete the copy of the Mail folder placed on the Desktop.

CBS HD Broadcast switching between HD/SD

Similar Messages

Maybe you are looking for