CCP installs Muse to "C:\Program" ?
Hi all,
Has anyone else had issues deploying Muse as part of a CCP package (Windows 7, x64)?
Every time so far it seems to dump it into a folder "C:\Program" ... which obviously Winodws takes exception to and renames. But on the next boot the folder is back again, so Windows renames it again, ad infinitum. You end up with a bunch of folders "C:\Progra~1" "C:\Progra~2" and so on.
I've tried remaking CCP packages, I've tried installing on different PCs, this is always choosing the default install location.
Edit the ExceptionConfig file. It is just an XML file. If you reformat it so it is not all stored on one line you need to edit line 109. Otherwise serach for the section for Muse and edit the Argument that has the [INSTALLDIR] value.
[INSTALLDIR] needs to be enclosed in quotes. Edit that value key to look like this:
<Argument name="installerArg4="[INSTALLDIR]""/>
Then you can run the ExceptionDeployer.exe and it will install correctly.
If you are installing manually and setting the install directory be sure to enclose it in quotes or use the 8.3 filename path to install.
Similar Messages
-
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - RickHi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
Not able to access Itunes store anymore. Just quit working for no reason. I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". Not sure what this message means. Am I suppose to contact Apple ? What is meant by package vendor ?
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.
Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help
Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed! -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
What does this mean, and how do you fix it?
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
Is there something wrong with the iTunes 10.7 Windows installer package?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am a new user. I attemped to install I cloud on my Windows 7 home eddition. The program starts to install, but then a error message appears stating "There is a problem with this Windows Installer pacage. A program required for this istall to complete could not be found". What can I do to install I-Cloud?
I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
Maybe you are looking for
-
Report engine(rwrun60) is crashing one by one
Below is the setting of my reports server parameter on 11.5.10.2. maxconnect=300 cachedir="/u02/EPFH/epfhora/8.0.6/reports60/server/cache" cachesize=1000 minengine=16 maxengine=24 initengine=16 maxidle=30 security=1 englife=50 mailprofile="$Header: R
-
How to dynamically generate HTML in Servlet without all the out.println?
Since I am not sure whether this is a Java Servlet or JSP problem, so I will describe my situation. And hopefully someone can propose a good solution. I came from a PHP, so Java Servlet and JSP are still a little bit foreign for me. My problem My fro
-
Two apple ID's, one has purchased additional storage
I have two apple ID's--one on my iPhone and one on my iPad. I only want ONE. I realize they can't be combined. I have bought storage on my iPad that NOTHING has been synced to, it needs to be purchased on my iPhone instead. I want to have just ONE ap
-
Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, when I double-click the st
-
What is the best way to correct white balance shifts post production. If shooting underwater, there is either a big jump to very blue, or to red. Will I have to select different underwatercolour ranges and correct them each, or is there an easier way