Report engine(rwrun60) is crashing one by one

Below is the setting of my reports server parameter on 11.5.10.2.
maxconnect=300
cachedir="/u02/EPFH/epfhora/8.0.6/reports60/server/cache"
cachesize=1000
minengine=16
maxengine=24
initengine=16
maxidle=30
security=1
englife=50
mailprofile="$Header: REP60_server.ora 115.6 2004/11/30 05:20:55 ptiwari ship $"
nlssupport=yes
The number of engines starts with 16 and goes up also, but after handling few number of requests, it shutdown one by one and finally one engine left.(The minserver is 16).
I suspect when memory acquired by report server(rwmts60) is growing, it is not able to restart the report engine.
What is the cause the report engine is not able to keep 16 engines as specified. We have esingle node application with 8 cpus.
One peak the load is as below.
load averages: 3.11, 3.92, 4.23 13:09:24
550 processes: 542 sleeping, 1 zombie, 5 stopped, 2 on cpu
CPU states: 73.4% idle, 18.5% user, 8.1% kernel, 0.0% iowait, 0.0% swap
Memory: 16G real, 6746M free, 12G swap in use, 33G swap free
Regards,
Mushir

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
You can check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

Similar Messages

  • Report Engine rwEng-0 crashed when server startup

    I installed 9ias on RedHat Linux, and applied the latest patches(Core patch 2, NT patch 1, form&report patch 2).But when I start the report server(in-process server).
    The report server's log shows:
    ** 2003/5/19 8:51:9:297 -- Reports Server is starting up
    *** 2003/5/19 8:51:24:418 -- Reports Server started up engine rwURLEng-0
    *** 2003/5/19 8:51:31:892 -- Reports Server started up engine rwEng-0
    *** 2003/5/19 8:51:32:956 -- Engine rwEng-0 crashed
    Then I run a report with the web browser, after single sign-on login interface, the browser is hang, then shows
    REP-51026: No output for job 19
    Some new lines append in the log file:
    *** 2003/5/19 9:7:2:980 -- Reports Server started up engine rwEng-0
    *** 2003/5/19 9:7:9:633 -- Reports Server started up engine rwEng-1
    *** 2003/5/19 9:7:15:994 -- Reports Server started up engine rwEng-2
    *** 2003/5/19 9:7:23:226 -- Reports Server started up engine rwEng-3
    *** 2003/5/19 9:7:30:328 -- Reports Server started up engine rwEng-4
    *** 2003/5/19 9:21:24:827 -- Reports Server shut down engine rwURLEng-0
    *** 2003/5/19 9:21:30:413 -- Reports Server started up engine rwURLEng-0
    I sent the request again, the browser shows:
    REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
    Anyone can help me?

    Thanks for your advice,I try it , when startup, no error in the reportserver.trc file, but when I send a request from the web , it shows:
    [2003/5/20 2:59:7:975] Debug 56031 (ConnectionImpl:runJob): Job 1 is waiting for
    notification
    [2003/5/20 2:59:8:919] Info 56020 (EngineManager:spawnEngine): Launching engine
    rwURLEng-0
    [2003/5/20 2:59:8:919] Debug 50103 (EngineManager:spawnEngine): Start engine com
    mand line = /oracle/product/app/bin/rwengine.sh -cp /oracle/product/app/j2ee/hom
    e/lib/ojsp.jar:/oracle/product/app/reports/jlib/rwrun.jar:/oracle/product/app/jl
    ib/zrclient.jar -XX:+AllowUserSignalHandlers -XX:CompileThreshold=20000 -Xmx128M
    oracle.reports.engine.RWEngine name=rwURLEng-0 server=rep_app_server ORACLE_HOM
    E=/oracle/product/app engineimplclass=oracle.reports.urlengine.URLEngineImpl tra
    ceopts=trace_all tracefile=/oracle/product/app/reports/logs/rep_app_server-rwURL
    Eng-0.trc tracemode=trace_replace cacheDir=/oracle/product/app/reports/cache
    [2003/5/20 2:59:8:969] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0
    has been launched
    [2003/5/20 2:59:8:970] State 56004 (EngineInfo:setState): Engine rwURLEng-0 stat
    e is: Initial
    [2003/5/20 2:59:19:841] Exception 50125 (exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=55103,
    java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
    engine",
    java.lang.String moduleName="REP"
    at oracle.reports.RWExceptionHelper.read(Unknown Source)
    at oracle.reports.engine._EngineClassStub.getEnvs(Unknown Source)
    at oracle.reports.server.EngineManager$TimedPingerThread.run(EngineManag
    er.java:1581)
    ): Internal error exception oracle.reports.RWException {
    oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
    int errorCode=55103,
    java.lang.String errorString="API URLEngine:getEngineEnvs not applicable to URL
    engine",
    java.lang.String moduleName="REP"
    [2003/5/20 2:59:19:842] Warning 50103 (EngineManager:registerEngine): REP-55103:
    API URLEngine:getEngineEnvs not applicable to URL engine
    report_server.log shows:
    *** 2003/5/20 2:56:53:703 -- Reports Server is starting up
    *** 2003/5/20 2:59:19:842 -- Reports Server started up engine rwURLEng-0
    *** 2003/5/20 2:59:25:94 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:26:164 -- Engine rwEng-0 crashed
    *** 2003/5/20 2:59:32:439 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:35:302 -- Engine rwEng-0 crashed
    *** 2003/5/20 2:59:42:88 -- Reports Server started up engine rwEng-0
    *** 2003/5/20 2:59:44:472 -- Engine rwEng-0 crashed
    I still get "REP-56048: Engine null crashed, job Id: 1
    " on the web.

  • Report Engine rwEng-0 crashed

    Terminated with error: REP-56048: Engine rwEng-0 crashed, job Id: 57404
    What are the possible causes of above problem?
    Regards,
    Raj

    1. Run away query
    2. Time out occured due to preset setting on reports server

  • Report engine crashes

    Hi, When, i run the report from forms, i am getting the below error message.
    Any help would be appreciated
    " Terminated with error: <br>REP-56048: Engine rwEng-1 crashed, job Id: 73448 "
    Thanks & Regards
    A.Gopal

    hi 868080
    are u trying to generate in spreadsheet or pdf. check following link
    My Work Blog - Oracle and SQL server: Oracle Forms Report Crash while generating Excel output, REP-56049

  • Report Engine Crashed

    Form version is form 6.0.8.8.0
    Report version is 6.0.8.8.3.3
    I am facing two problems
    first is when i run a report and report engine is not already open report will run ok but whenever report engine already open report engine will crash down.
    Second prb is i am getting this error msg in few reports
    REP-1212: Object 'M_G_CLIENT_CODE_GRPFR' is not fully enclosed by its enclosing object ''.
    We are using the following procedue in our form builder files to call a report :
    Add_Parameter(pl_id,'FROM_DATE',TEXT_PARAMETER,to_char( :OP_LOG.FROM_DATE, 'dd/mm/yyyy'));
    Add_Parameter(pl_id,'TO_DATE',TEXT_PARAMETER,to_char( :OP_LOG.TO_DATE, 'dd/mm/yyyy'));
    Add_Parameter(pl_id,'SECURITY',TEXT_PARAMETER,:OP_LOG.ISIN_POPLIST);
    Add_Parameter(pl_id,'P_SECURITY_DESC',TEXT_PARAMETER,V_SECURITY_NAME);
    Add_Parameter(pl_id,'P_WHERE_CLAUSE',TEXT_PARAMETER,CLAUSE);
    --Launch the report
    Launch_Report('ANNOUNCEMENT_DETAIL', pl_id);
    --Launch_Report Method
    PROCEDURE Launch_Report(report_name varchar2, pl_id ParamList) IS
    BEGIN
    Run_Product(REPORTS, report_name, ASYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
    END;

    I have applied patch 14. Now the error is being produced are
    Starting report Daily_Trade_List [Thu Jul 10 12:57:51 2003] ...
    REP-1401: 'f_company_sec2formattrigger': Fatal PL/SQL error occurred.
    ORA-06508: PL/SQL: could not find program unit being called
    REP-0594: No report output generated.
    End report Daily_Trade_List [Thu Jul 10 12:57:56 2003].

  • Report Engine crashing on Solaris when report with graph is given.

    Hi,
    We are using following environment:
    Solaris 8
    Oracle 9i Report Sevices.
    When we try to execute reports having graphs then the report engine crashes with the following exception:
    REP-0177: Error while running in remote server
    REP-56048: Engine rwEng-0 crashed
    The complete crash log is also appendend in the end of this mail.
    When I remove the graph from the rdf then reports get exectued fine without any crash. The same rdg with graph works fine on windows NT.
    If somebody can help on this, it will be great.
    Thanks,
    Ashish
    The complete crash log is as follows:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xf017b350
    Function name=_Xm21FreeHashTable
    Library=/usr/lib/libXm.so.4
    Current Java thread:
         at sun.awt.motif.MWindowPeer.create(Native Method)
         at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
         at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
         at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
         at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
         at java.awt.Frame.addNotify(Frame.java:353)
         at java.awt.Window.pack(Window.java:369)
         at tdg.Perspective.<init>(Perspective.java:478)
         at oracle.dss.graph.PFJ.<init>(PFJ.java:47)
         at oracle.dss.graph.Graph.createPFJ(Graph.java:1190)
         at oracle.dss.graph.Graph._setupGraphView(Graph.java:353)
         at oracle.dss.graph.Graph.<init>(Graph.java:164)
         at oracle.reports.chart.Chart.<init>(Chart.java:51)
         at oracle.reports.chart.ChartRunner.<init>(ChartRunner.java:46)
         at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
         at oracle.reports.engine.EngineImpl.run(EngineImpl.java:289)
         at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
         at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
         at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
         at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
         at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
         at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
         at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
         at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
    Dynamic libraries:
    0x10000      /users/orarep9i/OraHome1/jdk/jre/bin/../bin/sparc/native_threads/java
    0xff350000      /usr/lib/libthread.so.1
    0xff390000      /usr/lib/libdl.so.1
    0xff200000      /usr/lib/libc.so.1
    0xff330000      /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
    0xfe480000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/client/libjvm.so
    0xff2d0000      /usr/lib/libCrun.so.1
    0xff1d0000      /usr/lib/libsocket.so.1
    0xff100000      /usr/lib/libnsl.so.1
    0xff0d0000      /usr/lib/libm.so.1
    0xff310000      /usr/lib/libw.so.1
    0xff0b0000      /usr/lib/libmp.so.2
    0xff080000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/native_threads/libhpi.so
    0xff040000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libverify.so
    0xfe440000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libjava.so
    0xfe410000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libzip.so
    0xf3be0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libnet.so
    0xf3bc0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libioser12.so
    0xf39e0000      /usr/lib/nss_nis.so.1
    0xf2000000      /users/orarep9i/OraHome1/lib/librw90.so
    0xf1d00000      /users/orarep9i/OraHome1/lib/libobx90.so.0
    0xf36b0000      /users/orarep9i/OraHome1/lib/librws90.so.0
    0xf2a80000      /users/orarep9i/OraHome1/lib/libde90.so.0
    0xf2fc0000      /users/orarep9i/OraHome1/lib/libucol90.so.0
    0xf39b0000      /users/orarep9i/OraHome1/lib/libuicc90.so.0
    0xf2ea0000      /users/orarep9i/OraHome1/lib/libca90.so.0
    0xf35e0000      /users/orarep9i/OraHome1/lib/libmma90.so.0
    0xf2dc0000      /users/orarep9i/OraHome1/lib/libmmiw90.so.0
    0xf3860000      /users/orarep9i/OraHome1/lib/libmmov90.so.0
    0xf2f90000      /users/orarep9i/OraHome1/lib/libmmos90.so.0
    0xf2cc0000      /users/orarep9i/OraHome1/lib/libmmoi90.so.0
    0xf32e0000      /users/orarep9i/OraHome1/lib/libmmia90.so.0
    0xf2da0000      /users/orarep9i/OraHome1/lib/libmmft90.so.0
    0xf1fc0000      /users/orarep9i/OraHome1/lib/libmmcm90.so.0
    0xf1c00000      /users/orarep9i/OraHome1/lib/libvgs90.so.0
    0xf2ca0000      /users/orarep9i/OraHome1/lib/libuihx90.so.0
    0xf1b90000      /users/orarep9i/OraHome1/lib/libuc90.so.0
    0xf1b20000      /users/orarep9i/OraHome1/lib/libuipr90.so.0
    0xf1900000      /users/orarep9i/OraHome1/lib/libuimotif90.so.0
    0xf1ae0000      /users/orarep9i/OraHome1/lib/libot90.so.0
    0xf18a0000      /users/orarep9i/OraHome1/lib/librem90.so.0
    0xf1820000      /users/orarep9i/OraHome1/lib/libree90.so.0
    0xf1fa0000      /users/orarep9i/OraHome1/lib/librec90.so.0
    0xf17f0000      /users/orarep9i/OraHome1/lib/libuiimg90.so.0
    0xf17b0000      /users/orarep9i/OraHome1/lib/libuia90.so.0
    0xf2a60000      /users/orarep9i/OraHome1/lib/libtknqap90.so.0
    0xf1780000      /users/orarep9i/OraHome1/lib/libutt90.so.0
    0xf1750000      /users/orarep9i/OraHome1/lib/librod90.so.0
    0xf1720000      /users/orarep9i/OraHome1/lib/libror90.so.0
    0xf16f0000      /users/orarep9i/OraHome1/lib/libros90.so.0
    0xf16c0000      /users/orarep9i/OraHome1/lib/libuat90.so.0
    0xf16a0000      /users/orarep9i/OraHome1/lib/libdfc90.so.0
    0xf1680000      /users/orarep9i/OraHome1/lib/libutc90.so.0
    0xf1660000      /users/orarep9i/OraHome1/lib/libutj90.so.0
    0xf1630000      /users/orarep9i/OraHome1/lib/libutl90.so.0
    0xf1610000      /users/orarep9i/OraHome1/lib/libsl90.so.0
    0xf0c00000      /users/orarep9i/OraHome1/lib/libclntsh.so.9.0
    0xf15f0000      /users/orarep9i/OraHome1/lib/libwtc9.so
    0xf15d0000      /usr/lib/libsched.so.1
    0xf15b0000      /usr/lib/libaio.so.1
    0xf0a00000      /usr/lib/libXm.so.3
    0xf1540000      /usr/lib/libXt.so.4
    0xf0900000      /usr/lib/libX11.so.4
    0xf1520000      /usr/lib/libgen.so.1
    0xf1500000      /usr/lib/librt.so.1
    0xf14e0000      /usr/lib/libSM.so.6
    0xf14b0000      /usr/lib/libICE.so.6
    0xf1480000      /usr/lib/libXext.so.0
    0xf0bd0000      /usr/openwin/lib/libdga.so.1
    0xf0bb0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libawt.so
    0xf0280000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/motif21/libmawt.so
    0xf09b0000      /users/orarep9i/OraHome1/jdk/jre/bin/../lib/sparc/libmlib_image.so
    0xf0000000      /usr/lib/libXm.so.4
    0xf08e0000      /usr/openwin/lib/libXtst.so.1
    0xeff00000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libfontmanager.so
    0xf07a0000      /usr/openwin/lib/libdps.so.5
    Local Time = Fri Apr 18 09:22:09 2003
    Elapsed Time = 110
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)

    Please try the following
    * Modify $ORACLE_HOME/bin/reports.sh, replace "classic"
    with "server" in the LD_LIBRARY_PATH for the JVM
    * Modify $ORACLE_HOME/bin/rwengine.sh, just before the exec
    command, insert the following line:
    export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/i386/libawt.so
    In Linux there was a similar problem and the above workaround worked . You can give this a try .
    Thanks
    The Oracle Reports Team

  • Report on BEx query with 2 structures (one in rows and one in columns)

    Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
    Ok, I found samr problem in another thread. Sorry.
    Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

    Hey Flora,
    Happy to hear that its working now.
    Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
    You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
    I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
    or
    If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
    Hope this helps in clear, please revert me for any clarification.

  • IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

    IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

    Hi,
    You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
    Safari add-ons can cause performance issues or other situations
    If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Mac OS: Web Browser Quits Unexpectedly or Stops Responding
    Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    It contains fixes that might help. Then repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

    Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

    I'm a little confused by this?
    Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
    but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

  • Is there a report showing all the DDL objects for one APP?

    Hi,
    Is there a report showing all the DDL objects for one APP?
    I need to move an app to my workspace. The workspace I need to move it from has approx 20 applications in it, thus all the tables, procedures, etc are too many.
    What way is the easiest?
    I've looked at exporting the DDL and the app. and look to see what the app needs. But it has many pages.
    Thank you, BillC

    Hello Bill,
    You might find the report in the following location to be helpful:
    Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
    Regards,
    Arie.

  • Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads" and "report a problem" page NEVER loads, no email contact. Please help

    Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads".
    When you go to "Report a problem" next to the item (Great Gatsby) on the email invoice or on the online account  - it takes you to online support - if you elect problems with iTune downloads the page NEVER opens...  no email contact. Please help

    This is bad - I have an Apple automated response that they got my report on 12/6, 12/10 and 12/14, and I haven't heard anything from them since the 6th when I got one reply that told me to do things I tried before reporting the problem. Between the 6th and 10th I replied to their response 4 times and they ignored me, forcing me to report a problem with two more items that wont download but getting no response.
    How do they get away with this kind of behavior, especially for someone with FIVE Core 2 Duo macs and thousands of dollars of of iTunes store purchases? I'm getting really ******.

  • Display customer details one by one in alphabetical order in alv report?

    Hi experts,
    my requirement is ,
    I want to display customer name  and city as  top and then for particular customer's details (like invoice no's,due date, vat.cst etc)
    display in alv grid format,and then next customer name and detals .....etc.(customer name alphabetical order) in single page one by one. Using ALV reports is possible ? pls give me the brief code (or idea).pls give me solution.
    My input is to enter customer numbers so that output(customer details ) is displayed one by one in order.
    I tried but i didn't get if possible pls give me SDN link.

    Ram,
    loop at internaltable.
    I guess you can use AT NEW fieldname event to display the customer name and then call REUSE_ALV_GRID_DISPLAY for every customer to display the corresponding details
    Thanks
    Bala Duvvuri

  • Is there any report where we can see more then one position assigned to emp

    Hi
    Is there any report where we can see more then one position assigned to employee.
    Basically requirement is that some of employees got assigned two positions by mistake, so I want to know the standard report to find out such employees.
    Thanks & Regards
    Rajesh

    Hi,
    Use RHSTRU00 report with object type P and evaluation path P_S_S_C.
    Regards,
    Dilek

  • After installing Crystal Reports XI on Windows 2003 server with one error..

    After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error.  I had to regsvr it manually.  Crystal still didn't run.  Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services.  Thanks.

    Thank you for sharing your finding. Very much appreciated.
    The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
    As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
    Ludek

  • REP-56048: Engine rwEng-0 crashed sending reports to printer Linux

    Hi,
    I was wondering if anyone had any ideas of things I could try to get around this error in Oracle 10g (10.1.2.3) on Linux:
    Terminated with error: REP-56048: Engine rwEng-0 crashed
    I'm receiving it when I send a report directly to the printer (DESTYPE=printer DESFORMAT=blank DESNAME=printer name. When I run it locally on my Windows Machine, the command works and my report prints direclty to the printer fine. It's only when I go to Linux that I have issues. I get the above error. I've read posts on here about turning tracing off but that doesn't seem to help (unless I turned an option off that I thought was tracing.
    When I run it with (DESTYPE=cache DESFORMAT=pdf), the reports generates in a new browser window and works fine (on Windows and Linux both).
    Here's the code below I'm sending
    V_OTHER := 'PARAMFORM=NO READONLY=YES authid='||user;
    V_OTHER := V_OTHER||' PAGESIZE='||vPaper;
    V_OTHER := V_OTHER||' ORIENTATION='||vOrientation;
    V_OTHER := V_OTHER||' DELIMITER='||V_DELIM;
    V_OTHER := V_OTHER ||' '||vParameters;
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_FILENAME, LOWER(:MODULE.MODULE_NAME)||'.rep');
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_SERVER, 'rep_inxx37_ybs');
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_OTHER, V_OTHER);
    IF :SUBM_RQST.DESTINATION = 'P' THEN -- This is printer option
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESTYPE, PRINTER);
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESNAME, 'gt-ybs-ps');
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESFORMAT, '');
    ELSIF :SUBM_RQST.DESTINATION = 'S' THEN     -- This is the PDF option               
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESTYPE, CACHE);
    SET_REPORT_OBJECT_PROPERTY('GENERICREPORT', REPORT_DESFORMAT, 'PDF');
    END IF;
    Any help is appreciated.
    Chris

    Has anyone had any issues with upgrading from a different OS (like Windows) to Linux and trying to print reports directly to the printer? I've had nothing but issues with it. I know others are using the feature but, I just haven't figured it out.
    When I send it via the command line, I get this message below. I'm working with Oracle Support on this. I've got default printer setup as my network printer. I can print a document via the command line to my printer but when I submit an Oracle Report command, I get errors like below.
    [as10g@inxx37 bin]$ ./rwrun.sh report=/u11/app/as10g/ybs/bin/test.rdf destype=printer
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # SIGSEGV (0xb) at pc=0x01c4d4d3, pid=21730, tid=103095184
    # Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
    # Problematic frame:
    # C [libc.so.6+0x704d3] strrchr+0xa3
    # An error report file with more information is saved as hs_err_pid21730.log

Maybe you are looking for