CDAUI1000 Error while trying to load data. Ensure that the system path includes the location of the WebAdminLib.dll.

Hello, been receiving this error in Desktop Admistrator Web admin. I have tried the fix where you change the environment variable path and delete the Team Admin folders, but still receive the error. Any ideas??
7.0(1)SR04ES02_Build023
Thanks

Hi All,
So to recap, these are the steps to be followed:
On the Unified CCX server, add the location of the WebAdminLib.dll
(C:\Program Files\Cisco\Desktop\bin) to the Path environment variable.
1. In Control panel, launch the System utility.
2. On the Advanced tab, click Environment Variables.
3. From the list of system variables, select Path and click Edit.
4. In the Variable value field, locate the string C:\Program
Files\Cisco\Desktop\bin; and, using cut/paste, move it to the beginning of
the variable value string. This results in the DLL being accessed from the
correct location.
5. Click OK and close the System utility.
6. Stop the Cisco Unified Node Manager.
7. On the Unified CCX server, delete the teamadmin folder from these
locations:
C:\Program Files\wfavvid\tomcat_appadmin\webapps
C:\Program Files\wfavvid\tomcat_appadmin\work\catalina\localhost
8. Restart the Unified Node Manager, and wait two minutes.
9. Access Cisco Desktop Administrator and verify that you can navigate to
the Services Configuration
Documentation:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/
reference/guide/cad66ecd.pdf (pg 29)
In case this does not solve the issue, please verify if you are hitting the defect: CSCtr07664
Sometimes, the dll itself might be corrupted and thus the options in front of you are:
1) OS repair using the software disk
2) Rebuild the node
Regards,
Abhiram Kramadhati

Similar Messages

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

Web ADI-Error while trying to load data-URGENT!!!!!!!!!!!!!!!!!!!!!!!!!

Hi,
I have created a custom integrator and I am trying to load the data using Web ADI but I am getting some errors
I am trying to load some rows.
when I click on upload it gave me prameter window to select all rows or flagged rows(Normal) but when I click on upload after that I got the 1st error which says{color:#ff0000}"*The Server is Uable to Complete The Upload. Please contact the system administrator"*{color}when I click on close its getting closed but ....when I click on cancel ({color:#ff0000}X{color}), I got 2nd warning message {color:#ff0000}*"Warning-The upload process cannot be canceled, Press OK to return to the processing page"* {color}and when I click ok then I got the 3rd message confirmation that the rows got loaded sucessfully and some times when I try to load the data I am getting an Error message saying*{color:#ff0000}" Please Resolve the{color} {color:#ff0000}following error to{color} {color:#ff0000}continue, Internal Page Flow Error".*
*{color}*
Please Advice!!!!!!!!!

Also, review the following thread.
WEB ADI CUSTOM INTEGRATOR UPLOAD ERROR

Constraint: disable validate returns error while trying to load data

Hi,
I may be missing something but this is what I'm facing:
Table ttab has a primary key, let say ttab_pk, that I modified using this command: alter table ttab modify constraint ttab_pk disable validate.
I thought I would be able to load new data with SQLLoader without any problem (sqlldr userid=myusr/mypwd control=myctl.ctl direct=TRUE), but I keep having this msg:
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table MYSCHEMA.TTAB.
ORA-25128: No insert/update/delete on table with constraint (MYSCHEMA.TTAB_PK) disabled and validated
In what config the "disable validate" really work ?
Thank a lot for any help.

http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/c22integ.htm
# DISABLE NOVALIDATE is the same as DISABLE. The constraint is not checked and is not necessarily true.
# DISABLE VALIDATE disables the constraint, drops the index on the constraint, and disallows any modification of the constrained columns. metalink
Note <Note:69637.1> has a good discussion of DISABLE VALIDATE

While trying to load data Runtime Err UNCAUGHT_EXCEPTION Except.CX_RSR_X_ME

Hi
We are on BI.7 patch SAPKW70015 BI_CONT 703 - 0007 SAPKIBIIP7 and multi source system BI server. One is for R/3 it is already working and another is for new IS Retail.
While trying to load data to inventory (Z-cube) for first time in production system we get the following error :
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSR_X_MESSAGE
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "SAPLRRMS" or "LRRMSU13"
    "RRMS_X_MESSAGE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 73
    of the (Include) program "LRRMSU13".
    The program "SAPLRRMS" was started as a background job.
Line SourceCde
   43     BREAK-POINT.
   44     SET EXTENDED CHECK ON.
   45   ENDIF.
   46
   47   IF i_abend EQ rs_c_false.
   48 *... Nachricht an den Message-Handler schicken
   49
   50     DATA: l_type TYPE smesg-msgty.
   51
   52 *... S-Meldung wenn kein Handler initialisiert
   53     IF g_active IS INITIAL.
   54       l_type = 'S'.
   55     ELSE.
   56       l_type = 'W'.
   57     ENDIF.
   58
   59     CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
   60       EXPORTING
   61         i_class = 'BRAIN'
   62         i_type   = l_type
   63         i_number = '299'
   64         i_msgv1 = i_program
   65         i_msgv2 = i_text.
   66   ELSE.
   67     DATA: l_text TYPE string,
   68           l_repid TYPE syrepid.
   69
   70     l_repid = i_program.
   71     l_text = i_text.
   72
>>>>>     RAISE EXCEPTION TYPE cx_rsr_x_message
   74           EXPORTING text = l_text
   75                  program = l_repid.
   76   ENDIF.
   77
   78 ENDFUNCTION.
The other data loads are working fine in the production system.
We searched a lot on the forum and got various solutions But none of them are working fine for us.
Please suggest.
Thanks you for your help.
Ramana P

Are you trying this load manually or through process chain?
if process chain , the file should be placed in application server.
chk if the file is closed b4 triggering the infopack.
try loading other flat file load for different datasource and chk.
Ramesh

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Java.sql.sqlexception ora24344 error while trying to load Java class

Hi Guys,
I am getting "java.sql.sqlexception ora24344 error" while trying to load a java class using sql developer. Due to sensitivity of the code I am unable to post the code here but has anyone experienced a similar error before?
Thanks

Hi,
ora-24344 is known. It means it compiled but there are errors. Because you are not telling which version of Oracle you use, it is hard. Also you couldn't provide code will not make it easy. A common error is not having the right right on packages of SYS, such as UTL_* or DBMS_SYS_SQL. Can you maybe give the line of your code which produces the error?
Herald ten Dam
http://htendam.wordpress.com

Getting error in PSA while trying to load data in cube

Dear Friends,
I am trying to load data in cube I am getting error in PISA i.e.
Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .
please guide me.
Thanks in Advance.
Best Regards
Rafeeq

<i>Value 'Boroplus Anticream 19Gm Regular Plain ' (hex. '426F726F706C757320416E7469637265616D203139476D2052') of characteristic .</i>
Your data is in lowercase.. either change the data to UPPERCASE from source..
or delete the request in cube and edit PSA data from lowecase to UPPER CASE if they are few records only.
or make the infoobject setting lowecase checked,
Regards
Manga(Assign points if it helps!!)

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Server Hang While trying to load Data using SQLLDR

Hi guru's
OS Version: Centos 6 64 bit
DB Version : 11gR2 64 bit
When i am trying to load data using SQL ldr the loading in between hangs. As well as when i am trying to transfer text files which are approx 14Gb using winscp then it show me error as mentioned below:
Host is not communicating for more than 15 seconds.Still waiting..............
Not:if problem repeats , by turning off 'Optimize connection buffer size'
Warning : Abort this operation will close the connection
I talked to our n/w admin regarding the same problem
He blaim that its due to oracle not by any n/w
can anyone help me in this respect.

Check MOS note :
SQL*Loader Hangs After Start [ID 1186863.1]

Bw problem/error when trying to load data

hi experts i suddenly have this issue when trying to load data anywhere in my bw system (psa,ods,infocubes) i get the following abap runtime error:
SNAP_NO_NEW_ENTRY
runntime error,short dump could not be written
and bellow that it generally says that SNAP is full and i need to create more free space
any suggestions what i should do?
ps.i ve tried the re-organize option and no luck, i need to take more drastic measures
thanks

check the below thread...
[SNAP_NO_NEW_ENTRY;

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Solution for "Error while trying to synchronize Audio and MIDI" and "System Overload" messages

Article for those who hate Logic error windows
Seen in Logic Pro 9.1.7 on Mac OS X Lion 10.7.4
and Logic Pro 9.0.0 on Mac OS X Snow Leopard 10.6.5
Logic Pro:
System Overload.
The audio engine was not able to process all required data in time.
(-10011)
Error while trying to synchronize Audio and MIDI.
Sample Rate xxxxx recognized.
Check conflict between Logic Pro and external device.
The search in the help given as follows: overload occurs when you use a lot of tracks and a lot of effects on them, and the synchronization is lost when the selected MIDI track for recording or playback. Yes, this is all that is written in the resources. And here are useful tips that have been found:
The Bounce function allows the entire instrument track to be recorded as an audio file. This bounced audio file can then be used (as an audio region) on a standard audio track, allowing you to reassign the available processing power for further software instrument tracks. For more details, see "Bouncing Your Project."
You can also make use of the Freeze function to capture the output of a software instrument track, again saving processing power. For details, see "Freezing Tracks in the Arrange Area."
These tips - about the timing. About overload - there are no tips, except as "reducing the number of plug-ins" and "increasing latency". Zero useful tips - I got two errors in the test project with a blank audio track with no effects, MIDI drums and standard synthesizer, it was no aux buses, and the entire project was only a single plugin in the master track.
Here is the configuration of my computer:
iMac12, 2
CPU: Intel Core i5 3,1 GHz
Memory: 4 GB
And here's a project that almost immediately stops Logic, all instruments and plug-ins with the init-patch, ie not the most demanding settings:
It's sad.
When this happened the first time, I could start the project only if the empty audio track has been selected, a track specially designed so that you can at least start the project. Then, this problem has evaporated along with the changing conditions of work and I forgot about it until the last case.
I was looking for the cause of the problem in the console and the system monitor for two days, and finally I found that Logic ping to the network frequently. I remembered the exact time of occurrence of the problem, and system logs revealed that the problems began immediately, as soon as I deactivate the service of the Internet.
Solution: enable the Internet, or add a new network service on a computer with no Internet. I just created the Ethernet connection to the ip address 1.0.0.0
Logic immediately began to sing.

Hi gabaghoul
Yes, it worked for me on four different OS and Logic versions (10.6 - 10.8 and 9.0 - 9.1.6)
It does not work in some cases, hard enough to tell in which one, but you can try, it very easy: go to the net settings and create new Ethernet connection to the ip address 1.0.0.0 and connect LAN cable to the port.
Also you can try to figure out what happens in your system while Logic error occured - fot that you just start Console and search "logicpro"
Pay attention to repetitive events in a console and events with suitable timing, not so far from error
The problem may be related to the GUI or system memory, sometimes turning off Safari (or Chrome, others browsers) might help.
Message was edited by: spred

Error While Trying To Populate Data .....Invalid Row ID

Hi ,
I have created a form wherein the user enters details and presses save . The data on the form level is populated in a Custom Table . Some attributes of the table are programatically populated and some attributes are tagged to UI Components on the Form Level.
When the user presses Save the following Error Occurs
oracle.apps.fnd.framework.OAException: oracle.jbo.DMLException: JBO-26080: Error while selecting entity for TcsAssocFrontEndSegLookUpEO
     at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1408)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormData(OAPageBean.java:2517)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1647)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
java.sql.SQLException: ORA-01410: invalid ROWID
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550)
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:614)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:4962)
     at oracle.apps.fnd.framework.server.OAEntityImpl.doSelect(OAEntityImpl.java:1684)
     at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:4122)
     at oracle.jbo.server.EntityDefImpl.findFromDatabase(EntityDefImpl.java:889)
     at oracle.jbo.server.EntityDefImpl.findByPrimaryKey(EntityDefImpl.java:1069)
     at oracle.jbo.server.QueryCollection.findByKey(QueryCollection.java:2944)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:3072)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:3004)
     at oracle.jbo.server.ViewRowSetImpl.findByKey(ViewRowSetImpl.java:2998)
     at oracle.jbo.server.ViewObjectImpl.findByKey(ViewObjectImpl.java:6450)
     at oracle.apps.fnd.framework.server.OAViewObjectImpl.findByKey(OAViewObjectImpl.java:456)
     at oracle.apps.fnd.framework.webui.OAWebBeanDataAttributeHelper.checkAttributes(OAWebBeanDataAttributeHelper.java:1129)
     at oracle.apps.fnd.framework.webui.OAWebBeanDataAttributeHelper.getViewObjectRow(OAWebBeanDataAttributeHelper.java:773)
     at oracle.apps.fnd.framework.webui.OAWebBeanDataAttributeHelper.setValue(OAWebBeanDataAttributeHelper.java:496)
     at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.setValue(OAWebBeanFormElementHelper.java:445)
     at oracle.apps.fnd.framework.webui.OAWebBeanTextInputHelper.setValue(OAWebBeanTextInputHelper.java:161)
     at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.processFormAttribute(OAWebBeanFormElementHelper.java:407)
     at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.processFormDataAfterController(OAWebBeanFormElementHelper.java:340)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:757)
     at oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean.processFormData(OAMessageTextInputBean.java:488)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OACellFormatBean.processFormData(OACellFormatBean.java:416)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OARowLayoutBean.processFormData(OARowLayoutBean.java:352)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OATableLayoutBean.processFormData(OATableLayoutBean.java:354)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OAContentContainerBean.processFormData(OAContentContainerBean.java:353)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processFormData(OAHeaderBean.java:394)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.OASubTabLayoutHelper.processFormData(OASubTabLayoutHelper.java:524)
     at oracle.apps.fnd.framework.webui.beans.layout.OASubTabLayoutBean.processFormData(OASubTabLayoutBean.java:470)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processFormData(OAStackLayoutBean.java:356)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormData(OAPageLayoutBean.java:1574)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormData(OAFormBean.java:390)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataIndexedChildren(OAWebBeanHelper.java:1068)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1024)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormDataChildren(OAWebBeanHelper.java:1018)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormData(OAWebBeanHelper.java:758)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormData(OAWebBeanContainerHelper.java:662)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormData(OABodyBean.java:358)
     at oracle.apps.fnd.framework.webui.OAPageBean.processFormData(OAPageBean.java:2505)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1647)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at OA.jspService(OA.jsp:40)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
     at java.lang.Thread.run(Thread.java:534)
java.sql.SQLException: ORA-01410: invalid ROWID
I am wondering if the error is occuring due to the fact that i am partly populating the data declaratively and partly programatically ?
Kindly Help ,
Thanks

Thanks Mani ,
The table being populated is a customised table . It has[b] no primary key . All the columns are[b] nullable . The VO that i am using is taking rowid as Primary Key By default. I am not explicitly setting rowId .

Error while trying to access data from virtual provider - Technical Content

Hi,
I am trying to install the new BI 2004s technical content. I am done with the installation I am trying to display data for the remote cubes delivered i.e. 0TCT_VC11/21 etc. but getting an error:
Error reading the data of InfoProvider 0TCT_VC11
There is still no data source assigned to VirtualProvider 0TCT_VC11
The virtual providers are of type "virtual provider based on DTP" since standard technical content didnt have any DTPs for the VC cubes I tried to create some direct access DTPs based on datasources 0TCT_DS11 but there also getting error:
Source doesnt support direct access
I saw the type for datasource 0TCT_DS11 and its using SAP SAPI and not direct access and couldnt change the type actually the same datasource is also used by cube 0TCT_C11 so changing the type probably wouldnt have been a good idea.
I found the following notes 996735 and implemented its change...but no use...
we are on SP10 and content 7.03 SP2. Can anybody please help??

Hi all,
The above mentioned solution is a good idea but in this context not appropriate as it aims at resolving an issue in the delivered Content Version of 0TCT_VC11.
In your case, you already have 0TCT_VC11 activated and you can not read any data from this VirtualProvider in queries. Right?
In that case, you have to:
1. Check that the entire data flow is active for the InfoProvider (activation should occur for the MYSELF source system): 0TCT_VC11 with InfoSource 0TCT_IS11 with DataSource 0TCT_DS11
2. Activate the direct access for the VirtualProvider (Context menu of 0TCT_VC_11 > Activate Direct Access > Source Syst. for InfoSource3.x > Mark the column with the MYSELF source system and Save).
This corresponds to Installation "Step 5.) Activate direct access for virtual providers" that is mentioned in SAP Note 934848 "Collective note: (FAQ) BI Administration Cockpit".
Best regards,
Rudolf Hennecke
SAP NetWeaver RIG BI

CDAUI1000 Error while trying to load data. Ensure that the system path includes the location of the WebAdminLib.dll.

Similar Messages

Maybe you are looking for