Cell Editor in query desinging with hierarchy in row

Hi,
Is it possible to use cell editior with hierarchy in row? I am able to use it with structure in column.
Pl advise
Best Regards,
UR

Hi,
you need to have a structure in the rows and in columns.

Similar Messages

Formula Logic for Dates in the Cell Editor in Query Designer

Hi All
We are on BI7. (This is in the Cell Editor in Query Designer)
I am trying to create a formula in one cell that enters a date based on the following logic (Lets call this formula A):
I also have a placeholder "Cell reference" for a Date in another cell in the Cell Editor (Lets call it B).
I also have two other dates in seperate cells in the Editor (Lets call them C and D)
What i need to do is check that either C or D are not blank i.e one at least has a date and if so enter the date that is in B in A.
My formula logic in (Cell A) at the moment is as follows:
( Cell C <> 0 ) OR ( Cell D <> 0) * Cell B
When I run the query It is coming back with either a 1 or 0 depending if there is a date in C or D.
What I want it to do is to display the actual date of 'Cell B' in 'Cell A' if ( Cell C <> 0 ) OR ( Cell D <> 0)
If the value of B is blank ie no date I also want A to be blank i.e not equal zero or a blank date ie 00/00/0000
Example 1
Cell A    08/09/2009
Cell B    08/09/2009
Cell C   15/03/2010
Cell D
Cell A should = 08/09/2009 as there is a Date in Cell C or D and if so enter the date of Cell B in cell A
Example 2
Cell A
Cell B    08/09/2009
Cell C
Cell D
Cell A should = BLANK as there is a NO Date in Cell C or D
Example 3
Cell A
Cell B
Cell C   15/03/2010
Cell D
Cell A should = BLANK as there is a No Date in Cell B although a Date in cell C or D.
Thank you for assistance in advance
Kind regards
Stevo

Hi there,
It seems you have done almost everything...
What it seems that is missing is probably the cell reference for Cell C and for Cell D, or did you forget to mention it here?
So here it is the big idea:
- In the Cell Editor of the query designer, create a new cell reference for Cell C, let's name it ref_cell_c;
- In the Cell Editor of the query designer, create a new cell reference for Cell D, let's name it ref_cell_d;
- In the Cell Editor of the query designer, create a new cell reference for Cell B, let's name it ref_cell_b;
- In the Cell Editor of the query designer, create a new formula for Cell A, let's name it form_cell_a;
The form_cell_a should be created by the following:
( COUNT(ref_cell_c) + COUNT(ref_cell_d) ) * ref_cell_b
So COUNT(operand) returns 1 if operand is different of 0 else it returns 0; So if ref_cell_c has any valu or ref_cell_d has any value it should return the value of ref_cell_b.
Please note that with this formula, if you have values in both ref_cell_c and ref_cell_d this formula returns 2 * ref_cell_b, which is not what you pretend, I'm assuming you'll have value only for the following combinations:
ref_cell_c has value but ref_cell_d don't have any
ref_cell_c don't have any value but ref_cell_d has a value
ref_cell_c don't have any value neighther has ref_cell_d any
Diogo.

BEx query - report with hierarchy, strcuture and cell

SDN,
I need to create a report like -
                              Profit center1     Profit Center2     PC3   PC4    PC5      ... till PC20
Account
   001                            10                  20                  30      40       50     ...        100
   002                            10                 10                   10      10      10                 100
North                             20                 30                   40      50      60                 200
On rows, I need various account with their hierarchy, I should be able to expand account hierarchy node when wants to see details.
in Column... I need various profit center (on header) and data filled with various revenue. so intersection of account and profir center - should be revenue in that acoount from profit center.
Revenue - is based on formula - Ned to define based account-profit center interaction using Cell edit.
In order to create cell - I need two structure, so account I am making part of structure.
trouble is - I am not able to expand account hierarchy?
If I do not make account as part of strcuture, I can not use cell concept. If include them in struc... can not expand/drill on them?
profit center can be expanded as it is outside structure (of key figure)
what I am messing?

cell will only work for struc-struc intersection, we can not expand hierarchy obj defined within struc (confilct with cell static feature)...may be fix in fture release.

Query problem with hierarchy filter

Hello everybody,
i have a problem with a BEx Query 3.5 on a BW 7.01-System. This query includes the cha cost category as free characteristic which is filtered on a node. When we execute this query everythin works correktly. When I now select a filter value in BEx fpr this char the formula value in the row does not change. When I drilldown on this char the correct data was shown. This problem occurs only with this hierarchy node. With other selected nodes this problem does not occur.
We have regenerated this query in rsrt but that don't fix this issue.
Has anybody an answer?

hello,
the problem is known. You may check whether implementing the following note solves the issue:
1434532
best regards,
Jerome

Requirement in Cell Editor

Hello Guys,
I am having one requirement in Cell Editor. My report is static report. I mean all the columns and rows already decided. My infoprovider is contain only one characteristics and two key figures.
My characteristic is Circle and the Key Figures are Minutes of Usage and Revenue. I have to shwo the report like this:
Circle | Minutes of Usaage |Revenue|Cost Center|Profit Center
Tamil Nadu |    100             |    10000 | 201300A    | 201300
Karnataka       |      50            |     5000 | 201001A    | 201001
I dont have details of Cost Center and Profit Center. All are hard coded values. No changes on that. So directly we can maintain like this values.
Remember costcenter and profit center having characters. Otherwise in the cell definition we can create a formula and put this value.
Any body having idea on this ??????
If this will not work, i have to go with one more info provider and tranfer all the data with extra columns..... I dont want to do that........
Regards,
Vivek V

Hi Vivek,
Just a thought:
Since you want to display Char - KF - Char - I dont know how that would be possible - So Can we use Profit/Cost centre ( they are hard coded already) as KF..using replacement path/formula variable..so that it is Char - KF - KF...
And then there should not be possible ??
Dont knw if i m entirely on wrong path - but you can try - let me knw if it works..
when you say hard coded - hard coded where?? Can you get value soem where from master data??
Also Cell Editor makes query performance pathetic
Hope it helps
Gaurav
Message was edited by:
        Gaurav

Copy-Paste Multiple Cells in Cell Editor in BI7 at once

Dear all
I am using Cell Editor in Query Designer (BI7.0).
There are around 200 Rows. And each Cell has got some specific restriction.
Now, I need to copy a complete column to another column - so all restrictions/formulas of all cells in that column need to get copied to another cell of next column.
I am able to copy single cell by cell. But, I want to copy the entire column at once and paste it (For example select multiple cells and paste).
Is it feasible? I am unable to do this.
Plz help.
Thanks
Partho Bardhan

You need to report it to Apple Feedback so it can be logged and put in the queue to be fixed.
http://www.apple.com/feedback/macosx.html
As a alternative you might check out Yoink in the Mac App Store (MAS). When you drag a item, a shelf will slide out on the side of the monitor. You drop the items on the shelf, navigate to the destination then drag item to new location. Fast and simple to use.
https://itunes.apple.com/us/app/yoink/id457622435?mt=12

Custom JTable cell editors and persistence

I have a JTable with an underlying data model (an extension of AbstractTableModel) that uses custom cell editors in the last column. The cell editor in that column, for a given row, depends on the value selected in another column of the same row. The cell editors include text, date, list, and tree editors (the last one in a separate dialogue). The number of rows is changeable.
I have need to persist the data for a populated table from time to time, for restoration later on. I've achieved that, such that the data model is recreated, the table appears correct, and the appropriate cell editors activated (by creating new instances of the editors' classes).
However, my problem is that the (custom) cell editors do not reflect the data in the model when editing mode is begun the first time after restoration. Eg. the text editor is always empty, the list editor shows the first item, and no node is selected in the tree editor.
If I've restored the model correctly, should the editors properly reflect the underlying data when they are set to editing mode?
I suspected not, and thus tried to explicitly 'set' the correct values immediately after each editor is recreated ... but to no avail.
Does anyone have any thoughts, or experience with something similar? I'm happy to supply code.

You can use html tags within Swing, so I think you can do the following:
* MyRenderer.java
* Created on 26 April 2007, 10:27
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package newpackage;
import java.awt.Component;
import javax.swing.JLabel;
import javax.swing.JTable;
import javax.swing.SwingConstants;
import javax.swing.table.TableCellRenderer;
* @author CS781RJ
public class MyRenderer extends JLabel implements TableCellRenderer
    public MyRenderer()
        setHorizontalTextPosition(SwingConstants.RIGHT);
        setIconTextGap(3);
        setOpaque(true);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean cellHasFocus, int row, int column)
        if (isSelected)
            setBackground(table.getSelectionBackground());
            setForeground(table.getSelectionForeground());
        else
            setBackground(table.getBackground());
            setForeground(table.getForeground());
        if (value instanceof String)
            if ((value != null) && (value.toString().length() > 0))
                System.out.println("Value: " + value.toString());
                setFont(new java.awt.Font("Tahoma", 0, 11));
                setText("<html>" + value.toString().replaceAll("\n", "<br>") + "</html>");
        return this;
}In the class that has the JTable, use the code AFTER declaring the values, columns, etc:
jTable1.getColumnModel().getColumn(0).setCellRenderer(new MyRenderer());
jTable1.setValueAt("Riz\nJavaid", 0, 0);One thing I haven't done is to resize the cell heights, make sure this is done.
Hope this helps
Riz

JTable Custom Cell Editor: how to get value?

I have some custom cell renderers and editor. One of my custom cell editor is a text field that can popup a separat gui for easier data selection. As this text field alone with the popup gui works great, when i use this field in my custom jtable cell editor, the gui selected value is never displayed in the table cell. it just shows the old value.?

Well, here's how I do it. I'm very new to Swing so I'm, not sure if this is the best way. If you find a better way, please repost on this message.
My cell editor is a JPanel with a JTextfield in it. I make sure that the JTextfield will have default focus when the JPanel is focused.
In the CellEditor, I add a KeyListener to the JTextField so that when the user hits enter, it fires the stopEditing. I then add a function to CellEditor that returns what's in the JTextField.
In the code, m_value is the JTextField. You want to add MyKeyAdapter to the JTextField. Viola, it works!
      * This private class reads in an enter key.
     class MyKeyAdapter extends KeyAdapter {
          public void keyPressed(KeyEvent e) {
               if (e.getKeyCode() == KeyEvent.VK_ENTER) {
                    stopCellEditing();
      * Returns the value of the editor
      * @return the value of the editor
     public String getValue() {
          return m_value.getText();

JTable cell editor popup

Hi All
I created a CalendarPanel, which contains a combobox for months and a spinner for year and grid of JLabels to display dates.
And, a JTable with a cell which holds a date value. I created a cell editor with JSpinner to increment or decrement date by 1, which is practically not good. So I added a button top popup the calendar and user selects the date.
Cell editor is a JPanel with a spinner and a small JButton. The click event of this button shows a Calendar (another JPanel) in which we can select the date.
The spinner in the cell editor and the Calendar are linked to each other so that if user clicks on the spinner to change the date, that change reflects in the calendar also, and vice versa.
I am able to popup the calendar on top of JTable at appropriate location (exactly below the cell) and when user selects the date it changes the value of spinner and vice versa.
With this I have two problems.
1. When user clicks on some other area of the calendar (except spinner) the calendar should automatically disappear. Right now when user double clicks on the date it disappears.
2. In the calendar panel when I click on combo box to select the month or on the spinner to change the year - table cell is losing its focus and stopping the cell editing, means no link with calendar and the cell. But this is not happening with the label click (I guess this is because JLabels have no focus)
How can I solve these 2.
Thanks in advance.

1. When user clicks on some other area of the calendar
(except spinner) the calendar should automatically
disappear. Right now when user double clicks on the
date it disappears. Add a mouse listener to the other components that updates the calendar, the setVisible(false).
2. In the calendar panel when I click on combo box to
select the month or on the spinner to change the year
- table cell is losing its focus and stopping the cell
editing, means no link with calendar and the cell. But
this is not happening with the label click (I guess
this is because JLabels have no focus)
Have your cell editor extend DefaultCellEditor. In the constructor, set the editorComponent to your new calendar component. Add a mouse listener (adapter) to the editorComponent - in mouseClicked, call stopCellEditing().

Create a VC Model for BEx queries with Cell Editor

Hello All,
I am trying to create a VC Model for BEx queries with Cell Editor.
BW Development Team has created a BEX query with complex restrictions and calculations using Cell Editor feature of BI-BEX.
The query output in BEx analyzer is correct where all values are being calculated at each Cell level and being displayed.
But, while creating VC model, system is not displaying the Cells.Thus, no VC Model can be created.
I have executed below steps:
1. Created a VC Model for BEx Query - ZQRY_XYZ
2. Create Iview -> Create a dataService -> Provide a Table from the Output
In the Column field system is not showing any of the Cells (present in Cell Editor)
Please help me to solve this issue.
Thanks,
Siva

Hi
If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
Regards
Sandeep

Problem sorting JTable with custom cell editor

Greetings,
I have created a JTable with a JComboBox as the cell editor for the first column. However, I couldn't simply set the default cell editor for the column to be a JComboBox, since the values within the list were different for each row. So instead, I implemented a custom cell editor that is basically just a hashtable of cell editors that allows you to have a different editor for each row in the table (based on the ideas in the EachRowEditor I've seen in some FAQs - see the code below). I also used a custom table model that is essentially like the JDBCAdapter in the Java examples that populates the table with a query to a database.
The problem comes when I try to sort the table using the TableSorter and TableMap classes recommended in the Java Tutorials on JTables. All of the static (uneditable) columns in the JTable sort fine, but the custom cell editor column doesn't sort at all. I think that the problem is that the hashtable storing the cell editors never gets re-ordered, but I can't see a simple way to do that (how to know the old row index verses the new row index after a sort). I think that I could implement this manually, if I knew the old/new indexes...
Here's the code I use to create the JTable:
// Create the Table Model
modelCRM = new ContactTableModel();
// Create the Table Sorter
sorterCRM = new TableSorter(modelCRM);
// Create the table
tblCRM = new JTable(sorterCRM);
// Add the event listener for the sorter
sorterCRM.addMouseListenerToHeaderInTable(tblCRM);
Then, I populate the column for the custom cell editor like this:
// Add the combo box for editing company
TableColumn matchColumn = getTable().getColumn("Match");
RowCellEditor rowEditor = new RowCellEditor();
// loop through and build the combobox for each row
for (int i = 0; i < getTable().getRowCount(); i++) {
JComboBox cb = new JComboBox();
cb.addItem("New");
//... code to populate the combo box (removed for clarity)
rowEditor.add(i,new DefaultCellEditor(cb, i))); //TF
} // end for
matchColumn.setCellEditor(rowEditor);
Any ideas how to do this, or is there a better way to either sort the JTable or use a combobox with different values for each row? Please let me know if more code would help make this clearer...
Thanks,
Ted
import java.util.*;
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
public class RowCellEditor implements TableCellEditor
protected Hashtable editors;
protected TableCellEditor editor, defaultEditor;
public RowCellEditor()
editors = new Hashtable();
defaultEditor = new DefaultCellEditor(new JTextField());
public void add(int row, TableCellEditor editor)
editors.put(new Integer(row), editor);
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
editor = (TableCellEditor) editors.get(new Integer(row));
if (editor == null)
editor = defaultEditor;
return editor.getTableCellEditorComponent(table,
value,
isSelected,
row,
column);
public Object getCellEditorValue() {
return editor.getCellEditorValue();
public boolean stopCellEditing() {
return editor.stopCellEditing();
public void cancelCellEditing() {
editor.cancelCellEditing();
public boolean isCellEditable(EventObject anEvent) {
return true; //TF
//return editor.isCellEditable(anEvent);
public void addCellEditorListener(CellEditorListener l) {
editor.addCellEditorListener(l);
public void removeCellEditorListener(CellEditorListener l) {
editor.removeCellEditorListener(l);
public boolean shouldSelectCell(EventObject anEvent) {
return editor.shouldSelectCell(anEvent);
-------------------

Well, I found a solution in another post
(see http://forum.java.sun.com/thread.jsp?forum=57&thread=175984&message=953833#955064 for more details).
Basically, I use the table sorter to translate the row index for the hashtable of my custom cell editors. I did this by adding this method to the sorter:
// This method is used to get the correct row for the custom cell
// editor (after the table has been sorted)
public int translateRow(int sortedRowIndex)
checkModel();
return indexes[sortedRowIndex];
} // end translateRow()
Then, when I create the custom cell editor, I pass in a reference to the sorter so that when the getTableCellEditorComponent() method is called I can translate the row to the newly sorted row before returning the editor from the hashtable.

Small issue with custom table cell editor and unwanted table row selection

I'm using a custom table cell editor to display a JTree. Thing i notice is that when i select a value in the tree pop-up, the pop-up closes (as it should) but then every table row, from the editing row to the row behind the pop-up when i selected the value becomes highlighted. I'm thinking this is a focus issue, but it thought i took care of that. To clairfy, look at this: Before . Notice how the "Straightening" tree item is roughly above the "Stock Thickness" table row? When i select Straightening, this is what happens to my table: After .
My TreeComboBox component:
public class TreeComboBox extends JPanel implements MouseListener {
    private JTextField itemField;
    private TreeModel treeModel;
    private ArrayList<ActionListener> actionListeners = new ArrayList<ActionListener>();
    private Object selectedItem;
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
    public TreeComboBox(TreeModel treeModel) {
        this(treeModel, null);
     * Creates a new <code>TreeComboBox</code> instance.
     * @param treeModel the tree model to be used in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public TreeComboBox(TreeModel treeModel, Object selectedItem) {
        this.treeModel = treeModel;
        this.selectedItem = selectedItem;
        initComponents();
     * Returns the current drop-down tree model.
     * @return the current <code>TreeModel</code> instance.
    public TreeModel getTreeModel() {
        return treeModel;
     * Sets the tree model.
     * @param treeModel a <code>TreeModel</code> instance.
    public void setTreeModel(TreeModel treeModel) {
        this.treeModel = treeModel;
     * Returns the selected item from the drop-down selector.
     * @return the selected tree object.
    public Object getSelectedItem() {
        return selectedItem;
     * Sets the selected item in the drop-down selector.
     * @param selectedItem tree will expand and highlight this item.
    public void setSelectedItem(Object selectedItem) {
        this.selectedItem = selectedItem;
        String text = selectedItem != null ? selectedItem.toString() : "";
        itemField.setText(text);
        setToolTipText(text);
     * Overridden to enable/disable all child components.
     * @param enabled flat to enable or disable this component.
    public void setEnabled(boolean enabled) {
        itemField.setEnabled(enabled);
        super.setEnabled(enabled);
    public void addActionListener(ActionListener listener) {
        actionListeners.add(listener);
    public void removeActionListener(ActionListener listener) {
        actionListeners.remove(listener);
    // MouseListener implementation
    public void mouseClicked(MouseEvent e) {
    public void mouseEntered(MouseEvent e) {
    public void mouseExited(MouseEvent e) {
    public void mousePressed(MouseEvent e) {
    public void mouseReleased(MouseEvent e) {
        showPopup();
    private void initComponents() {
        setLayout(new GridBagLayout());
        itemField = new JTextField();
        itemField.setEditable(false);
        itemField.setText(selectedItem != null ? selectedItem.toString() : "");
        itemField.addMouseListener(this);
        add(itemField, new GridBagConstraints(0, 0, 1, 1, 1.0, 0.0,
                GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, new Insets(0, 0, 0, 0), 0, 0));
    private void showPopup() {
        final TreePopup popup = new TreePopup();
        final TreeComboBox tcb = this;
        final int x = itemField.getX();
        final int y = itemField.getY() + itemField.getHeight();
        int width = itemField.getWidth() + popupButton.getWidth();
        Dimension prefSize = popup.getPreferredSize();
        prefSize.width = width;
        popup.setPreferredSize(prefSize);
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                popup.show(tcb, x, y);
                popup.requestFocusInWindow();
    private void fireActionPerformed() {
        ActionEvent e = new ActionEvent(this, ActionEvent.ACTION_PERFORMED, "TreeComboBoxSelection");
        for (ActionListener listener : actionListeners) {
            listener.actionPerformed(e);
    private class TreePopup extends JPopupMenu {
        private JTree tree;
        private JScrollPane scrollPane;
        public TreePopup() {
            initComponents();
            initData();
        private void initData() {
            if (treeModel != null) {
                tree.setModel(treeModel);
        private void initComponents() {
            setFocusable(true);
            setFocusCycleRoot(true);
            tree = new JTree();
            tree.setRootVisible(false);
            tree.setShowsRootHandles(true);
            tree.setFocusable(true);
            tree.setFocusCycleRoot(true);
            tree.addTreeSelectionListener(new TreeSelectionListener() {
                public void valueChanged(TreeSelectionEvent e) {
                    tree_valueChanged(e);
            scrollPane = new JScrollPane(tree);
            add(scrollPane);
        private void tree_valueChanged(TreeSelectionEvent e) {
            DefaultMutableTreeNode node = (DefaultMutableTreeNode) tree.getLastSelectedPathComponent();
            setSelectedItem(node.getUserObject());
            fireActionPerformed();
            this.setVisible(false);
}My TreeComboBoxTableCellEditor:
public class TreeComboBoxTableCellEditor extends AbstractCellEditor implements TableCellEditor, ActionListener {
    protected TreeComboBox treeComboBox;
    protected ArrayList<CellEditorListener> cellEditorListeners = new ArrayList<CellEditorListener>();
    public TreeComboBoxTableCellEditor(TreeComboBox treeComboBox) {
        this.treeComboBox = treeComboBox;
        treeComboBox.addActionListener(this);
    public Object getCellEditorValue() {
        return treeComboBox.getSelectedItem();
    public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column) {
        treeComboBox.setSelectedItem(value);
        return treeComboBox;
    public void actionPerformed(ActionEvent e) {
        stopCellEditing();
}Any thoughts?
Edited by: MiseryMachine on Apr 3, 2008 1:21 PM
Edited by: MiseryMachine on Apr 3, 2008 1:27 PM

As I said, you have to have empty context elements before additional rows will be open for input.
For instance if you want to start with 5 rows available for input do the following to your internal table that you will bind:
data itab type standard table of sflight.
do 5 times.
append initial line to itab.
enddo.
context_node->bind_table( itab ).
The other option if you need n number of rows is to add a button to the table toolbar for adding more rows. When this button is pressed, you add a new context element to the node - thereby creating a new empty row in the table.

Problem in JTable with a JComboBox cell editor

Hi gurus,
Please help! I am having a problem with a JTable that has a JComboBox cell editor. When the table is first loaded, the combo box column displays correct data. But whenever I click the combo box, the selection will be set to the first item in the combo box list once the popup menu pops up even before I make any new selection. It is very annoying.
Here is how I set the cell editor:
populateComboBoxModel(); // populate the combo box model.
DefaultCellEditor cell_editor = new DefaultCellEditor(new JComboBox(
combo_model));
contrib_table.getColumnModel().getColumn(1).setCellEditor(
cell_editor);
I didn't set the cell renderer so I assume it is using the default cell renderer.
Thanks !

Not quite. The example doesn't have a different cell editor for each row of the table. I'm sure I must be missing something, bc I've found many references to the fact that this is possible to do. And I have most of it working. However, when I click on any given combobox, it automatically switches to the first value in the list, not the selected item. I've tried setting the selected item all over the code, but it has no effect on this behavior. Also, it only happens the first time I select a given cell. For example, suppose the first row has items A, B, and C, with B being the selected value. The table initially displays with B in this cell, but when I click on B, it switches to A when it brings up the list. If I select B, and move on to some other cell, and then go back and click on B again, it doesn't switch to A.
There seems to be a disconnect between the values that I display initially, and the values that I set as selected in the comboboxes. Either that, or it behaves as though I never set the selected item for the combobox at all.
Any help would be greatly appreciated.

Bex Query with Hierarchy on Workbook problem please help

Hi all,
I have a problem, Im trying to copy information from specific cells on a query that I opened using Analyser, heres the situation:
Account            Amount    New Col
22110200           15 dlls
-22110201          4 dlls
-22110202          5 dlls
-22110204          6 dlls
121101010000   1dlls          4 dlls
121101020000   1dlls          5 dlls
121101040000   1dlls          6 dlls
4,5 and 6 dlls are amounts from the first 3 accounts, I tried simpy copying the information but for some reaseon when the report reloads the informacion is lost.
Also I using Hierarchy to display the values so if I copy the value from cell Q700 the value will change is the levels on the Hierarchy are expanded.
Is there anyway to do this? please help.
Thanks in advance

Hi,
Thanks for the answer, Is it possible to call the Macro when the user Expands a node? or it needs to be called from a button or combination of keys?
Thanks again

Drill Down BeX Query with hierarchy in WEBI

Hi,
I am using a Bex Query with Hierarchy in my WEBI report. Is it possible to drill down ? I am not able to use Scope of Analysis because it is disabled. I am very new to WEBI. Please help me out.
Thanks in Advance.
Lakshmi Mohan

http://www.google.co.in/url?sa=t&rct=j&q=drill%20down%20bex%20query%20with%20hierarchy%20in%20webi%20%20%20&source=web&cd=2&ved=0CDQQFjAB&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2FpreviewBody%2F137316-102-1-277519%2FWeb%2520Intelligence%2520on%2520SAP%2520implementation%2520best%2520practices.pdf&ei=xofcTpSgF5DJrAeaxpiIBw&usg=AFQjCNHuwDIpvxciPKJyEdoz3GiVjRKgqA
http://www.scribd.com/doc/62293080/40/Query-Drill-for-hierarchies

Cell Editor in query desinging with hierarchy in row

Similar Messages

Maybe you are looking for